Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

58--HOLDER SUBASSEMBLY,SON

Active

SPE7M826T5834Federal

Response Deadline08/17/2026, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 43 units of NSN 5845144798926, HOLDER SUBASSEMBLY, SON, to be delivered to W1A8 DLA DISTRIBUTION within 313 days of award. The only approved source for this item is 94404 44036260. The solicitation, identified as SPE7M834, is a restricted request for quotation with no hard copies available; all submissions must be made electronically through the SAM.gov portal. Specifications, plans, or engineering drawings are not provided, and any responsible supplier may respond as long as the quote is submitted before the deadline. The solicitation was posted on August 6, 2026, with responses due by August 17, 2026. The acquisition falls under NAICS code 334290 and is managed by the DLA Land and Maritime office in Columbus, Ohio, under the Department of Defense. Questions must be directed via email to the designated point of contact, with further details accessible through the provided SAM.gov link or the DIBBS solicitation search portal.

General Info

Procure 43 Holder Subassemblies, SON, to DLA by 313 days, electronic submission via SAM.gov only.

Agency

Department Of Defense → DLA Land And MaritimeView Agency

NAICS

334290 - Other Communications Equipment ManufacturingView NAICS

Place of Performance

OH

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseCombined Synopsis

PostedAug 6

Combined Synopsis

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 12:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Land And Maritime

Contacts1 person available

OfficeCOLUMBUS, OH, 43218-3990, USA

Organization / Agency

Department Of Defense → DLA Land And Maritime

View Agency Profile

Office AddressCOLUMBUS, OH, 43218-3990, USA

Contacts

contact@example.gov

Full Description

Show more

Proposed procurement for NSN 5845144798926 HOLDER SUBASSEMBLY,SON: Line 0001 Qty 43 UI EA Deliver To: W1A8 DLA DISTRIBUTION By: 0313 DAYS ADO Approved source is 94404 44036260. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.

Similar Contracts

Same NAICS industry code

Temperature Monitoring System

Solicitation # 12639526Q0199SSN

The U.S. Department of Agriculture’s National Centers for Animal Health is seeking information from small businesses capable of providing a comprehensive Temperature Monitoring System to oversee critical environmental conditions across its 520-acre campus. The system must support 1,150 temperature probes installed in ultra-low temperature units, refrigerators, freezers, incubators, water baths, CO2 monitors, humidity sensors, and liquid nitrogen tanks, with cellular transmission capability capable of penetrating concrete walls and covering the entire facility. The contractor will be expected to deliver not only the hardware and software but also full system training, ongoing oversight, preventive maintenance, operational verification, testing, and calibration. Only firms classified as small businesses under NAICS code 334290, with no more than 800 employees, are eligible to respond, and submissions must include company name, point of contact, SAM Unique Entity ID, and general details about the proposed system to assist the government in shaping its future acquisition strategy. This is strictly a market research notice with no obligation to award a contract; no reimbursement will be provided for response costs, and responses are voluntary but highly influential for upcoming procurement decisions. Responses must be emailed to Jason L. Wilking by 11 a.m. CDT on August 10, 2026, and late submissions will not be accepted. The solicitation number is 12639526Q0199SSN, and while no formal request for quotes will be issued from this notice, all interested parties must submit separate proposals if a future solicitation is released. The agency will not answer questions regarding this notice, and no contract award will result from it. The office responsible is located in Minneapolis, Minnesota, and the requirement is tied to operations at the USDA’s National Centers for Animal Health. This sources sought notice is intended solely to inform the government’s planning process and determine whether a small business set-aside is appropriate for any subsequent RFQ.

Mrpbs Minneapolis Mn

POSTED

DEADLINE

AMPLIFIER,HIGH DENS

Solicitation # N0010426QNE17

This contract solicits repaired units of NSN 5895-016406849, an AMPLIFIER,HIGH DENS, under emergency acquisition flexibilities, with no new procurement permitted. Contractors must submit firm-fixed-price repair quotes via email to Rachel Kern, referencing a 80-day repair turnaround time measured from physical receipt of the asset at the contractor’s facility, as logged in the Commercial Asset Visibility system. The quote must include the contractor’s CAGE, unit repair price, Beyond Repair price, monthly throughput capacity, and confirmation of whether the item is obsolete. Repair must comply with the reference number N137793 and conform to manufacturer technical directives, drawings, and MIL-STD-130 marking requirements. All work must be mercury-free, with strict prohibitions against contamination, and any required use of mercury demands prior written approval and warning labeling. The contract enforces Government-Source Inspection and Acceptance and requires adherence to MIL-STD-2073 packaging standards. Contractors are responsible for all inspection and quality control activities, with records retained for 365 days after final delivery. The procurement is issued under a Basic Ordering Agreement, binding parties to its terms, with any conflicts favoring the BOA. The contract explicitly prohibits substitution of parts without written change orders, and only authorized distributors of the original manufacturer may submit offers, requiring proof of authorization. A monetary limit of $61,000 applies to repairs, and induction must begin within 120 days of award. Compliance with Buy American, cybersecurity maturity certification, small business subcontracting, and security exclusion clauses is mandatory. All contractual documents are deemed issued upon electronic transmission, and submissions must be completed by the deadline of September 8, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 1 month

59--AMPLIFIER,ELECTRONI

Solicitation # SPE7M526T396J

The contract seeks the procurement of eight units of NSN 5996007047173, an electronic amplifier, to be delivered to DLA Distribution Warner Robins within 239 days of award. The only approved source for this item is supplier 45934 with part number 965-3008-004. This procurement is conducted through a Request for Quote (RFQ) with no hard copies available; all responses must be submitted electronically. No specifications, plans, or drawings are provided, and any responsible supplier may submit a quote as long as it is received by the deadline. The solicitation number is SPE7M526T396J, posted on August 6, 2026, with quotes due by August 17, 2026. The acquisition falls under NAICS code 334290 and is managed by the DLA Land and Maritime office in Columbus, Ohio. All inquiries must be directed via email to DibbsBSM@dla.mil, with further details accessible through the SAM.gov link or the DIBBS website using the solicitation number.

DLA Land And Maritime

POSTED

DEADLINE

Solicitation # N0017826Q6848

The U.S. Navy’s Naval Surface Warfare Center Dahlgren Division is soliciting quotations for a specific video recording and reproducing equipment, part number 830-900102-01, manufactured exclusively by Delta Digital Information Systems Company of Horsham, Pennsylvania. This requirement is issued as a combined synopsis/solicitation under FAR Part 12 for commercial items, utilizing simplified acquisition procedures on a firm fixed-price basis. The equipment is essential for interoperability testing of tactical computer systems due to its unique ability to meet stringent timing requirements, and no substitute products will be considered. Award will be made on a Lowest Price Technically Acceptable basis to authorized resellers who provide documented proof of authorization from the original equipment manufacturer. All quoted prices must include shipping, freight, tariffs, and duties to Dahlgren, VA, with no additional costs permitted post-award. The procurement is a sole source action under FAR 6.103-1(b) because the specified hardware is the only item capable of fulfilling the operational needs. Submission of a quotation requires SAM registration, compliance with applicable certifications, and adherence to the Buy American Act or Trade Agreements Act, as applicable. Quotations must be received by 12:00 p.m. EST on 21 August 2026, with award anticipated by 26 September 2026. All inquiries must be sent to the designated point of contact with the solicitation number included in the subject line.

POSTED

DEADLINE

CONTROL-INDICATOR

Solicitation # SPRMM126QHC08

This contract pertains to the manufacture and supply of the CONTROL-INDICATOR under a fixed-price arrangement, with all technical and quality requirements governed by MIL-STD-130 Rev N for item marking and MIL-STD-2073 for packaging, preservation, and labeling. The contractor must ensure full compliance with inspection and acceptance standards, which are conducted at the source per DLA Procurement Note E06, and must maintain inspection records for 365 days after final delivery. Performance must occur at the contracted production facility unless a written change request is approved by the Contracting Officer, accompanied by a $250 administrative cost reduction and no change to the FOB point or delivery schedule, which is indicated as ARO. All orders require electronic invoicing through PIEE-WAWF using the Invoice and Receiving Report (COMBO), and contractors must register for EDA access to receive automated notifications regarding contract actions. Offers are evaluated using the Lowest Price Technically Acceptable (LPTA) method, where technical acceptability is a threshold requirement and award is granted to the lowest-priced compliant offer. The solicitation mandates disclosure of the Original Equipment Manufacturer and its CAGE code if the vendor is not the manufacturer, and prohibits substitutions without formal written approval using one of six designated change codes. Security and distribution controls are enforced under Class Deviation 2026-O0025, with all technical documents subject to specific distribution statements limiting access to authorized U.S. government entities or contractors. Contractors must provide point-of-contact information and confirm their status as authorized distributors through signed documentation, and are required to comply with annual representations and certifications under Deviation 2026-O0043, as well as the priority rating requirements for national defense, emergency preparedness, and energy programs. The solicitation was extended through July 30, 2026, and all contractual documents are deemed issued upon electronic transmission or mailing, with full responsibility for adherence to specifications resting solely on the contractor even if inspection clauses are not explicitly detailed.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

ENCODER-DECODER,COM

Solicitation # N0010426QND95

This contract pertains to the repair and quality assurance of the ENCODER-DECODER,COM, a critical component for naval systems, under a fixed-price arrangement governed by stringent technical and compliance standards. The work must adhere to specific CAGE codes and reference numbers, with all repairs executed in accordance with the contractor’s approved technical manuals, drawings, and government directives. The item must be marked in compliance with MIL-STD-130 Rev N and any design, material, or part number changes require prior written approval from the NAVICP-MECH Contracting Officer, classified under defined change codes that distinguish between functional equivalence and irreversibility of substitutions. A strict mercury-free mandate applies due to the item’s use in submarines and surface ships; any inclusion of mercury requires documented justification and explicit approval, along with protective measures and warning labels to prevent contamination. All materials must be free from mercury contamination, with validation through air sampling if suspicion arises, and subcontractors are bound by the same requirements. The contractor bears full responsibility for inspection and quality control throughout the process, maintaining records for at least 365 days post-delivery and ensuring all testing aligns with the original manufacturer’s specifications. Packaging and preservation must follow MIL-STD-2073 as specified in the schedule, and access to referenced military and technical documents is controlled through official DOD channels including DODSSP and NAVSUP-WSS-MECH, with specific procedures for requesting restricted documents marked NOFORN or Official Use Only. Distribution of technical data provided by the Navy is governed by seven standardized distribution statements, with X-designation permitting access to eligible private entities under export control regulations. Only authorized distributors of the original manufacturer may bid, requiring proof of authorization submitted with the offer. The contract is issued under Emergency Acquisition Flexibilities and is rated under the Defense Priorities and Allocations System, necessitating bilateral acceptance by the contractor. All contractual documents are deemed issued upon electronic transmission, and past performance will be evaluated under FAR 13.106(a)(2). Compliance with cybersecurity maturity, small business subcontracting, equal opportunity for veterans and workers with disabilities, and contractor purchasing system administration requirements is mandatory, with all representations and certifications due under the latest federal deviations effective February 2026. Responses are due by September 8, 2026, and the point of contact for inquiries is NARYAN.SMITH.CIV@US.NAVY.MIL, with the procuring activity located in Mechanicsburg, Pennsylvania.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 1 month

POWER DISTRO UNIT

Solicitation # N0010426QNE22

This contract pertains to the manufacture and delivery of a POWER DISTRO UNIT under solicitation N0010426QNE22, issued by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania. The requirement is governed by strict technical and quality standards, including compliance with MIL-STD-130 Rev N for marking, adherence to Cage Code 60955 and reference number MPD411425-013, and zero tolerance for mercury contamination due to the unit’s intended use in submarine and surface ship environments. Any substitution of parts requires prior written approval from the NAVICP-MECH Contracting Officer, with change requests classified under specific codes detailing the nature of modification. The contractor must ensure all materials are mercury-free unless explicit written authorization is obtained, and must implement safeguards to prevent contamination during manufacturing, testing, or assembly. The contract incorporates mandatory clauses for inspection, quality assurance, and recordkeeping, with the contractor bearing full responsibility for compliance even in the absence of explicit inspection protocols. All records must be retained for 365 days after final delivery. The procurement utilizes Emergency Acquisition Flexibilities and will be issued as a rated order under the Defense Priorities and Allocations System, requiring compliance with priority rating notices. It mandates the use of Wide Area Workflow for payment and receiving reports, and enforces Buy American and Free Trade Agreements requirements. Offerors must be authorized distributors of the Original End Manufacturer, submitting proof of authorization on letterhead. The contractor is bound by cybersecurity maturity certification, small business subcontracting and representation obligations, and security prohibitions tied to federal compliance protocols. Packaging must follow MIL-STD-2073, and all technical documents provided by the Navy include specific distribution statements limiting access and dissemination. Contractual documents are deemed issued upon electronic transmission, and bilateral acceptance is mandatory before execution. The solicitation response deadline is August 21, 2026, with the NAICS code 334290 indicating classification under Other Electrical Equipment and Component Manufacturing.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

License renewal

Solicitation # D-26-ST-0189

The Drug Enforcement Administration is pursuing a sole-source acquisition to renew licenses from Gladiator Forensics LLC under simplified acquisition procedures, citing authority under FAR 5.207(c)(16)(ii) to justify non-competitive procurement. The agency intends to issue a firm-fixed price purchase order for this requirement, which falls under NAICS code 334290, and is not open to competitive bidding at this stage. Interested parties may submit a capability statement to demonstrate their ability to meet the government’s needs, but submission does not guarantee a competitive solicitation. The closing date for capability statements is August 16, 2025, at 10:00 AM EST, and submissions must be sent electronically to Robert Radke at robert.j.radke@dea.gov. Although the notice was posted on August 6, 2026, the response deadline reflects a future date consistent with procurement cycles. The place of performance is designated as Lorton, Virginia, and the contracting activity is managed by the Department of Justice under the DEA’s authority.

Drug Enforcement Administration

POSTED

DEADLINE

59--ANTENNA, IN REPAIR/MODIFICATION OF

Solicitation # N0038326RBA48

The U.S. Navy, through NAVSUP Weapon Systems Support, is seeking a sole source repair of 33 units of NSN 7RH 5985 014183224 V2, identified as Antenna P/N 12-225P24, to be performed by ECI DEFENSE GROUP INC, the Original Equipment Manufacturer and exclusive source for this item. No technical drawings or data are available to the Government, and it does not hold rights to the intellectual property needed to source the repair from any other supplier, making ECI DEFENSE GROUP INC the only viable source under 10 U.S.C. 2304(c)(1) and FAR 6.302. Delivery is FOB Origin, and the requirement falls under NAICS code 334290 and FSC 5895. While the procurement is structured as a sole source, any responsible party may submit a capability statement or quotation within 45 days of the synopsis posting, though no award will be delayed for new source approval requests. The procurement will follow FAR Part 15 procedures, with all solicitations posted electronically via the Government-wide Point of Entry, and no hard copies or phone inquiries will be accepted. The primary point of contact for submissions is Linda Vong, reachable via email at linda.vong2.civ@us.navy.mil, with responses due no later than September 21, 2026. This effort is not set aside for small businesses and will be conducted entirely through electronic means.

Navsup Weapon Systems Support

POSTED

DEADLINE

in about 1 month

Global Security Solutions

Solicitation # N65236R0013

The Global Security Solutions contract, identified by solicitation number N65236R0013, is designed to deliver comprehensive Electronic Security System and Emergency Management System services to military personnel at shore installations globally. It encompasses the full lifecycle of these systems, including design, installation, integration, maintenance, upgrades, and support, ensuring continuous operational readiness and resilience for the warfighter. The contract aims to standardize and streamline the procurement and deployment of critical security and emergency response capabilities across all relevant naval installations. This is a combined contract with no set-aside, open to all eligible contractors under NAICS code 334290, and is managed by the Naval Information Warfare Center Atlantic under the Department of Defense. Proposals are due by August 13, 2026, and the primary point of contact is Mellisa Sistare, with secondary support from Christopher Brown, both reachable through their official Navy email addresses. The contract is headquartered in North Charleston, South Carolina, with performance requirements centered in Hanahan, South Carolina, though the scope of work extends worldwide. All solicitation details and submission instructions are accessible through the official SAM.gov link provided.

POSTED

DEADLINE

Hirsch Velocity Access Badging System

Solicitation # FA940126Q0032

The contract seeks the procurement of Hirsch Velocity software licensing coupled with hardware installation and ongoing service and maintenance for a five-year period, including a base year and four optional renewal years. The solution is intended for use as an access badging system, integrating physical security infrastructure with software-based credential management to ensure secure facility access. The effort is classified under NAICS code 334290 and is set aside exclusively for small businesses, with all performance required to take place at Kirtland Air Force Base in New Mexico. The solicitation, issued under number FA940126Q0032, was posted on August 6, 2026, and responses are due by August 10, 2026, with the award managed by the Department of Defense under the Office of FA9401 377 Msg Pk. Primary point of contact is Anna Hartkopp at anna.hartkopp.1@us.af.mil, with supplementary support available through Julia P. Kirby, reachable by phone at 505-846-1146. The contract will require vendors to provide not only the licensed software but also the associated hardware components and continued technical support to maintain system functionality throughout the entire term, including all optional extension periods. All submissions must comply with Small Business Administration set-aside requirements, and interested parties may access full solicitation details through the provided SAM.gov link.

FA9401 377 Msg Pk

POSTED

DEADLINE

Domestic Manufacturer of Military Interconnecting BoxesThe contract calls for the domestic manufacture and supply of interconnecting boxes that meet strict military specifications, with full adherence to the Berry Amendment and Buy American Act requirements, ensuring all materials and processing originate entirely within the United States. The products are intended for use by the Department of Defense’s Fluid Handling Division and must be delivered to the specified place of performance in Norfolk, Virginia, with a zip code of 23511-2701. The solicitation is structured as a subcontract opportunity under NAICS code 334290, which corresponds to Other Electrical Equipment and Component Manufacturing, indicating the technical nature of the components involved. Interested vendors must submit their responses by the deadline of August 17, 2026, with the solicitation posted on August 5, 2026. There is no designated set-aside for small businesses or other categories, meaning all qualified domestic manufacturers may compete. The contract emphasizes complete compliance with federal domestic sourcing mandates, requiring rigorous documentation and verification of origin for all materials and labor. All work must be performed in the United States, and the final products must be certified as meeting military standards without exception. The solicitation details can be accessed online through the DIBBS portal using the provided reference number.

FLUID HANDLING DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA Land And Maritime

Same awarding agency

Military Packaging and Preservation ServicesThe contract requires compliance with MIL-STD standards for the preservation, packaging, and marking of sensitive military shipments, ensuring that all materials are protected against environmental damage, corrosion, and physical degradation during transit and storage. The work must adhere strictly to Department of Defense specifications to maintain operational readiness and logistical integrity across the supply chain. This subcontract is issued under NAICS code 561910 and is managed by DLA Land and Maritime under the broader Department of Defense structure. The solicitation was posted on August 6, 2026, with a response deadline of August 21, 2026, at 4:00 p.m. The place of performance and organizational details are not specified, but the performance location will likely involve military logistics hubs or defense supply facilities. All work is expected to support secure and standardized handling of critical defense equipment, with no set-aside designation applied, meaning the opportunity is open to qualified contractors regardless of business size or ownership category.

Packaging and Labeling Services

POSTED

DEADLINE

Phosphate Coating Services for Propeller Shaft ComponentsThe contract requires the provision of military-compliant phosphate coating services specifically for drivetrain components, adhering strictly to the standards outlined in MIL-STD-171 and TT-C-490. These coatings are essential for corrosion resistance, lubricity, and adhesion of subsequent finishes on critical propeller shaft parts used in defense applications. The work must be performed to exacting military specifications to ensure performance, durability, and interoperability within defense systems. This is a subcontract opportunity issued by the Defense Logistics Agency Land and Maritime under the Department of Defense, with a NAICS code of 332813 indicating specialization in metal coating services. The solicitation was posted on August 6, 2026, and responses are due by August 21, 2026. While the place of performance and point of contact details are not specified, the work is expected to support military logistics and maintenance operations, and all services must meet the rigorous quality and compliance criteria mandated by federal defense standards.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

Manufacture of Vehicular Propeller Shaft (NSN: 014130080)The contract is for the manufacture and delivery of a second variant of a military propeller shaft designated by NSN 014130080, requiring strict adherence to Qualified Products List and Qualified Manufacturer List sourcing standards to ensure component authenticity and military-grade reliability. The work must include specialized packaging protocols compliant with defense logistics requirements, ensuring protection during transport and storage under harsh environmental conditions. This is a subcontract opportunity issued under the NAICS code 336390, categorized under the Department of Defense through DLA Land and Maritime, with a response deadline of August 21, 2026, and posted on August 6, 2026. The place of performance and point of contact details are not specified, and no set-aside designation is indicated, leaving eligibility open to all qualified subcontractors who can meet the technical and supply chain compliance criteria.

Other Motor Vehicle Parts Manufacturing

POSTED

DEADLINE

Manufacture of Vehicular Propeller Shaft (NSN: 014235120)The contract is for the manufacture and delivery of a military-spec propeller shaft equipped with a universal joint, engineered to meet stringent source control drawings and technical standards applicable to Department of Defense vehicles. The item is identified by NSN 014235120 and falls under NAICS code 336390, indicating it pertains to motor vehicle parts manufacturing. The work must be performed in full compliance with all military specifications to ensure operational reliability and interoperability within defense platforms. The solicitation is classified as a subcontract opportunity posted by DLA Land and Maritime on August 6, 2026, with a response deadline of August 21, 2026. There is no set-aside designation specified, meaning the contract is open to all qualified contractors regardless of size or business type. The place of performance is not detailed, and no point of contact information is provided in the data, but the official solicitation can be accessed through the SAM.gov portal for complete technical and administrative requirements. All deliverables must be fabricated, tested, and documented to meet the exacting standards required for military use.

Other Motor Vehicle Parts Manufacturing

POSTED

DEADLINE

59--TRANSFORMER,POWER AUTO

Solicitation # SPE7M126U5062

The U.S. Department of Defense through DLA Land and Maritime is soliciting quotes for 145 units of NSN 5950003483796, a power auto transformer, with delivery required within 124 days of award. This solicitation may lead to an indefinite delivery contract lasting one year or until the cumulative order value reaches $350,000, with an estimated two annual orders and a guaranteed minimum of 21 units. Deliveries will be distributed to multiple DLA depots across CONUS and OCONUS via consolidated and containerized shipping points. Only approved sources—identified by vendor codes 16157 3588, 51181 K7174, and 72914 55-0504-1—are eligible to respond. The solicitation is issued as an RFQ under NAICS code 334417 and is accessible exclusively online via the SAM.gov link; no hard copies or technical specifications are available. All responsible vendors may submit electronic quotes by the deadline of August 21, 2026, with inquiries directed to the designated point of contact email.

Electronic Connector Manufacturing

POSTED

DEADLINE

29--PUMP,HAND,FUEL PUMP

Solicitation # SPE7L526T4904

The U.S. Department of Defense, through DLA Land and Maritime, is seeking quotations for 294 hand fuel pumps with NSN 2910014705545 under solicitation number SPE7L526T4904, which is a Small Business Set Aside with no small business size standard applied. The procurement is exclusively for responsible sources, and all quotes must be submitted electronically by the deadline of August 17, 2026. Delivery is required to W1A8 DLA Distribution within 153 days after award, and the approved source for this item is 15852 AP00314. The solicitation is issued as a combined solicitation, and no hard copies or detailed specifications, plans, or drawings are available. The North American Industry Classification System code for this requirement is 336310, and inquiries must be directed via email to the designated point of contact at DibbsBSM@dla.mil, with the full solicitation document accessible only through the Sam.gov portal.

Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

DEADLINE

47--HOSE ASSEMBLY,NONMETAL

Solicitation # SPE7M426T320D

The contract solicitation is for the procurement of 11 units of a nonmetal hose assembly with NSN 4720012482251, to be delivered to DLA Distribution Cherry Point within 154 days after order placement. This is a source-controlled item requiring parts to be manufactured exclusively by the approved sources listed as 78570 and 99193, both using drawing number 3886075-2. All supplied items must strictly conform to the technical specifications detailed in the referenced drawing, and digitized versions of the drawing and associated military standards can be accessed electronically. The solicitation, identified as SPE7M426T320D, was posted on August 6, 2026, with quotes due by August 17, 2026, and is exclusively available online through the provided URL; no hard copies are distributed. Submission of quotes is mandatory through electronic means, and all responsible suppliers are invited to respond. The procurement is managed by the DLA Land and Maritime office in Columbus, Ohio, with all inquiries directed to the designated point of contact via email.

Fabric Coating Mills

POSTED

DEADLINE

59--SWITCH,PRESSURE

Solicitation # SPE7M526T374F

The U.S. Department of Defense, through DLA Land and Maritime, is soliciting quotes for 11 units of the pressure switch with NSN 5930008400253, to be delivered to DLA Distribution Depot Oklahoma within 168 days of award. This procurement is conducted under solicitation number SPE7M526T374F, which was posted on August 6, 2026, with responses due by August 17, 2026. Only approved sources—09049 42D49C and 81205 10-3269-10—are eligible to respond, and all quotations must be submitted electronically through the SAM.gov portal; hard copies are not accepted. No technical specifications, plans, or drawings are provided, and the solicitation is open to all responsible sources that submit timely quotes. The procurement falls under NAICS code 332919 and is managed from the office in Columbus, Ohio. Any questions must be directed via email to the designated point of contact listed in the solicitation document, accessible through the provided link or via the DIBBS website using the solicitation number.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

DEADLINE

25--LADDER,VEHICLE BOARDIN

Solicitation # SPE7L426T6096

The U.S. Department of Defense, through DLA Land and Maritime, is soliciting quotes for three vehicle boarding ladders identified by NSN 2540015932047 under solicitation number SPE7L426T6096. The requirement is for delivery to W1A8 DLA DISTRIBUTION with a mandatory delivery deadline of 168 days after order award. This procurement is issued as a combined solicitation open to all responsible sources, and responses must be submitted electronically via the SAM.gov portal; hard copies are not accepted. Digital access to drawings, military specifications, and standards is provided electronically, and no physical documentation will be furnished. The solicitation was posted on August 6, 2026, with a firm response deadline of August 17, 2026. The NAICS code 332999 applies, indicating the product falls under other fabricated metal product manufacturing. The contracting office is located in Columbus, Ohio, and all inquiries must be directed via email to DibbsBSM@dla.mil, with reference to the buyer listed in Block 5 of the solicitation document, accessible through the provided SAM.gov link or via the DIBBS website by entering the solicitation number. No set-aside classification is designated for this procurement, making it fully open to all qualified offerors.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Solicitation # SPE7M426T313T

The U.S. Department of Defense, through DLA Land and Maritime, is soliciting quotes for NSN 5330015124594, a gasket, under solicitation number SPE7M426T313T, which is a Small Business Set Aside for total procurement. A total of 36 units are required, each to be delivered to W1A8 DLA DISTRIBUTION within 244 days after award. The approved source for this item is BLUE GYLON 3565, and quotes must be submitted electronically via the SAM.gov portal; hard copies are not accepted. The solicitation, posted on August 6, 2026, has a response deadline of August 17, 2026, and is open to all responsible sources capable of meeting requirements. No specifications, plans, or drawings are available, and inquiries must be directed via email to the designated point of contact listed in the solicitation document, accessible through the provided SAM.gov link or DIBBS website using the solicitation number. The NAICS code is 339991, and the procuring office is located in Columbus, Ohio.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

DEADLINE

48--ROD,PILOT VALVE

Solicitation # SPE7MC26T185M

The contract seeks the procurement of five pilot valve rods with NSN 4820012477780, to be delivered to DLA Distribution location W1A8 within 101 days of award. The only approved source for this item is vendor 35795 N09976. The solicitation, identified as SPE7MC26T185M, is issued as a request for quote and is accessible exclusively online through the SAM.gov portal; no hard copies are available. No technical specifications, plans, or drawings accompany the solicitation, and all responsible sources are invited to submit quotes electronically before the deadline of August 17, 2026. The North American Industry Classification System code is 336310, and the contracting office is the DLA Land and Maritime based in Columbus, Ohio. The primary point of contact for inquiries is the buyer listed in Block 5 of the solicitation document, reachable via email at DibbsBSM@dla.mil, with additional information available through the provided SAM.gov link.

Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

DEADLINE

20--HATCH,RESTRAINT

Solicitation # SPE7M426T311X

The contract seeks the procurement of six hatch restraint units with NSN 2040013050618, to be delivered to DLA Distribution site W1A8 within 168 days after award. Only approved sources—0FB84, 38597, 563J1, and 8X044—all referencing part number 5223513-9—are eligible to submit quotes. The solicitation is issued as an RFQ under number SPE7M426T311X, with no hard copies available; all submissions must be made electronically through the SAM.gov portal. Technical specifications, plans, or drawings are not provided, and responsible sources are invited to quote even without access to detailed documentation. The opportunity is open without set-aside designation and falls under NAICS code 332510 for fabricated metal product manufacturing. The issuing organization is the DLA Land and Maritime office located in Columbus, Ohio, with inquiries directed to the listed primary point of contact via email. Quotes must be received by August 17, 2026, and the solicitation was posted on August 6, 2026.

Hardware Manufacturing

POSTED

DEADLINE