Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

59--CIRCUIT CARD ASSEMB

Awarded

SPE7M126T059TFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract solicitation titled 59--CIRCUIT CARD ASSEMB is issued under solicitation number SPE7M126T059T and was posted on May 26, 2026, with an award notice classification. It falls under NAICS code 334412, which corresponds to Printed Circuit Board Manufacturing, indicating the requirement involves the production or assembly of circuit cards. The contracting activity is managed by the DLA Land and Maritime office within the Department of Defense, based in Columbus, Ohio, with a postal address of 43218-3990. There is no set-aside designation specified for this opportunity, meaning it is open to all eligible contractors without restrictions based on business size or type. The place of performance has not been defined in the provided data, leaving flexibility in where the work may be conducted. The primary point of contact for inquiries is Natalya Radyk, reachable via email at [email hidden] or by DSN phone at [phone hidden]. All further details and submission procedures can be accessed through the official SAM.gov workspace link provided.

General Info

59 circuit card assemblies awarded under DLA Land and Maritime, Columbus, Ohio, to all eligible contractors.

Agency

Department Of Defense → DLA Land And Maritime

Contract Value

$102,225.29

NAICS

334412 - Bare Printed Circuit Board Manufacturing

Place of Performance

OH, USA

Set-Aside

NONE

Awardee

TRIMAN INDUSTRIES INC

Award Issued Date

05/26/2026, 12:00:00 AM UTC

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded

PostedMay 10

Combined Synopsis

AwardedMay 26

Contract was awarded

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Land And Maritime

Contacts1 person available

OfficeCOLUMBUS, OH, 43218-3990, USA

Organization / AgencyDepartment Of Defense → DLA Land And Maritime

Office AddressCOLUMBUS, OH, 43218-3990, USA

Contacts

Natalya Radyk

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

Proposed procurement for NSN 5998014848984 CIRCUIT CARD ASSEMB: Line 0001 Qty 83 UI EA Deliver To: DLA DISTRIBUTION DEPOT HILL By: 0165 DAYS ADO Approved source is 21269 B809-3006. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.

Similar Contracts

Same NAICS industry code

CIRCUIT CARD ASSEMB

Solicitation # SPRMM126QKG67

Solicitation SPRMM1-26-Q-KG67 is a small business set-aside request for quotations issued by DLA Mechanicsburg for the procurement of Circuit Card Assemblies (NSN 5998-01-312-8516). The requirement specifies that items must conform to the design represented by Cage Code 3SDB5 and reference number 937E343G1. Award will be determined based on Lowest Price Technically Acceptable (LPTA) criteria, with the Supplier Performance Risk System (SPRS) used to evaluate item, price, and supplier risk. The solicitation has undergone multiple extensions, with the final closing date established as November 20, 2026. The contractor is required to maintain ISO9001 quality standards and adhere to strict military specifications, including MIL-STD-130 for physical identification and MIL-STD-2073 for preservation and packaging. Inspection and acceptance will occur at the origin, and the contractor must maintain inspection records for 365 days following final delivery. Delivery is expected within 30 days under FOB Destination terms. All invoicing and receiving reports must be submitted electronically via the Wide Area Workflow (WAWF) system. Offerors who are not the original equipment manufacturer must provide the OEM CAGE code and part number with their quote.

SPRMM1 DLA Mechanicsburg

POSTED

about 3 hours ago

DEADLINE

CIRCUIT CARD ASSEMB

Solicitation # N0010426QQA90

Solicitation N0010426QQA90, issued by the Navsup Weapon Systems Support Mech, is a request for the manufacture and procurement of a circuit card assembly. The requirement specifies that the item must conform to the design represented by Cage Code 53711, reference number 6166858, and must be physically identified according to MIL-STD-130, Rev N. The contract is issued as a buy, with the resulting award to be executed bilaterally. All freight is designated as FOB Origin, and accelerated delivery is encouraged. Government source inspection is required, and the contractor is responsible for maintaining all inspection records for 365 calendar days following final delivery. Offerors must be authorized distributors of the original equipment manufacturer and are required to provide official verification of this status on company letterhead. The solicitation incorporates various federal regulations, including the Buy American-Balance of Payments Program and Small Business Subcontracting plans. Proposals must include firm unit and total pricing, procurement turnaround time, and the awardee CAGE code. Per Amendment 0002, the deadline for the receipt of offers has been extended to 4:30 PM local time on April 30, 2026. Packaging must comply with MIL-STD 2073, and any changes in design or part numbers require written approval from the Contracting Officer, unless they are simple part number changes.

Navsup Weapon Systems Support Mech

POSTED

about 3 hours ago

DEADLINE

KIT,CCA,CONROLLER

Solicitation # SPRMM126QHC38

This solicitation, issued by DLA Mechanicsburg under number SPRMM1-26-Q-HC38, seeks the manufacture and delivery of the KIT,CCA,CONROLLER (NIIN 016603072). The requirement specifies that the item must conform to the designs represented by Cage Codes 53711 and 30SS9. Delivery is required as soon as possible (ASAP) with FOB Destination terms. The government intends to make a single award based on a best-value determination where past performance, evaluated via the Supplier Performance Risk System (SPRS), is considered more important than price. The contract mandates strict adherence to quality and marking standards, including MIL-STD-130 for physical identification and MIL-STD-2073 for packaging. Inspection and acceptance will occur at the origin, with the contractor remaining responsible for all inspection requirements. Invoicing and receiving reports must be submitted electronically through the PIEE-WAWF system. Additional compliance requirements include Item Unique Identification (IUID) per DFARS 252.211-7003, cybersecurity protections under DFARS 252.204-7012, and various Buy American and small business representations.

SPRMM1 DLA Mechanicsburg

POSTED

about 3 hours ago

DEADLINE

in about 1 month

MULTI-PURPOSE SERVE

Solicitation # SPRMM126QGF14

Solicitation SPRMM1-26-Q-GF14, issued by NAVSUP Weapons Systems Support through DLA Mechanicsburg, seeks the procurement of one unit of a Multi-Purpose Serve (NSN 7HH 5998-01-705-5773). The requirement is for the manufacture of the item based on the design represented by Cage Code 4NCQ6, reference number SB-990179-AM. Offerors must provide a 60-day quote validity and, if not the original equipment manufacturer, must identify the OEM and their CAGE code. Consideration for award is limited to authorized distributors, who must provide signed proof of authorization on company letterhead. The government will evaluate quotations based on Supplier Performance Risk System (SPRS) assessments, focusing on item, price, and supplier risk, while explicitly prohibiting the use of additive manufacturing unless authorized. The contract mandates strict adherence to quality and packaging standards, including physical identification per MIL-STD-130 and packaging according to MIL-STD-2073 and ASTM D3951-18. Inspection and acceptance are conducted at the source per DLA Procurement Note E06, with the contractor maintaining all inspection records for 365 days post-delivery. Delivery is to be made to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Administrative requirements include electronic submission of combined invoices and receiving reports via PIEE-WAWF and compliance with various FAR and DFARS clauses regarding small business representations, security prohibitions, and the Buy American Act. No technical drawings are available for this item, and any changes in design or part numbers require written approval from the Contracting Officer.

SPRMM1 DLA Mechanicsburg

POSTED

about 3 hours ago

DEADLINE

CIRCUIT CARD ASSEMB

Solicitation # SPRMM127QKA49

Solicitation SPRMM127QKA49 is a fixed-price requirement issued by NAVSUP Weapon Systems Support for the manufacture and delivery of five circuit card assemblies. The items must conform to the design represented by Cage Code 1EG52, reference number ROF61205/4, and must be physically identified according to MIL-STD-130. The procurement is conducted under SEPA-EAF authority, with award based on the Lowest Price Technically Acceptable (LPTA) criteria. Offerors must be authorized distributors or the original equipment manufacturer, and they are required to provide CAGE codes and OEM identification if they are not the manufacturer. The contract mandates strict quality and security standards, including CMMC Level 1 self-certification and compliance with the Buy American and Balance of Payments Program. Packaging must adhere to MIL-STD-2073, with specific requirements for electrostatic discharge protection and DLR labeling. Inspection and acceptance will occur at the origin. All invoicing and receiving reports must be submitted electronically via the Wide Area WorkFlow (WAWF) system. The government will utilize the Supplier Performance Risk System (SPRS) to evaluate item, price, and supplier risk during the award process.

SPRMM1 DLA Mechanicsburg

POSTED

about 3 hours ago

DEADLINE

in about 1 month

MODULE ASSEMBLY,RIM

Solicitation # SPRMM126RHB33

Solicitation SPRMM126RHB33, issued by the Department of the Navy via Navsup Weapon Systems Support, seeks offers for the manufacture of the Module Assembly, Rim (NIIN 016258080). This unrestricted procurement is based on Technical Data Package version 003 and requires the contractor to maintain a Government Security Clearance with authorized access to Secret classified documents per DD Form 254. The contract mandates strict adherence to quality and technical standards, including MIL-STD-130 for physical identification, ANSI/ESD S20.20 for electrostatic discharge control, and MIL-STD-2073-1 for preservation and packaging. Award will be granted to the responsible offeror providing the lowest priced, technically acceptable offer, with risk assessments conducted via the Supplier Performance Risk System. The procurement has undergone several amendments, with the most recent extending the offer receipt deadline to November 12, 2026, and increasing the required quantity to 25 units. Contractors must utilize Wide Area WorkFlow for electronic invoicing and payment requests. Key compliance requirements include the submission of Material Safety Data Sheets for any hazardous materials and adherence to various FAR and DFARS clauses regarding domestic preferences, cybersecurity, and small business utilization. Inspection is performed at the origin, and the contractor is responsible for maintaining all inspection records for 365 calendar days following final delivery.

SPRMM1 DLA Mechanicsburg

POSTED

about 3 hours ago

DEADLINE

CIRCUIT CARD ASSEMB

Solicitation # N0038327QAA13

This solicitation, issued by NAVSUP Weapon Systems Support, seeks a contractor to perform the overhaul, upgrade, repair, testing, and inspection of various circuit card assemblies, including items with NSNs 5998-01-512-3463, 015123482, 015215180, 1680-01-619-4547, and 5998-01-620-1746. The primary objective is to return these assets to a Ready for Issue condition. The contract specifies a one-year induction period from the date of award, with final inspection and acceptance occurring at the origin. The contractor is responsible for providing all necessary facilities, labor, materials, and tooling, and must adhere to strict quality standards, including ISO 9001/SAE AS9100 and ANSI/NCSL Z540.3 for calibration. The government intends to make a single award based on a best-value determination, prioritizing past performance over price. Key operational requirements include the use of SAE-AS22759 series wire and compliance with MIL-STD-130 for markings and MIL-STD-2073-1 for packaging. The contract includes specific provisions for Beyond Economical Repair and Over and Above Repair determinations, both of which require DCMA concurrence. Invoicing and payment will be managed electronically through the Wide Area Workflow system. BAE Systems Controls Inc. is identified as a source for certain circuit card assembly repairs.

Navsup Weapon Systems Support

POSTED

about 3 hours ago

DEADLINE

in about 1 month

ELECTRONIC COMPONEN — 5998016746980 — SPRMM127QKA52

Solicitation # SPRMM127QKA52

Solicitation SPRMM1-27-Q-KA52, issued by the Department of the Navy via NAVSUP Weapons Systems Support, seeks the manufacture and supply of one electronic component identified by NIIN 016746980. The item must conform to the design represented by Cage Code 04JN4, reference number A0091563. Award will be granted to the responsible offeror submitting the lowest priced, technically acceptable offer under LPTA criteria. Technical acceptability requires full compliance with solicitation instructions and no exceptions to the terms. The evaluation process incorporates the Supplier Performance Risk System to assess item, price, and supplier risk. The contract mandates strict quality and safety standards, including a total prohibition of metallic mercury and mercury contamination for use on submarines and surface ships. Physical identification must follow MIL-STD-130, and packaging must adhere to MIL-STD-2073 and ASTM D3951-18 depending on the shipment destination. Inspection and acceptance are conducted at the origin, with the contractor maintaining all inspection records for 365 days post-delivery. Administrative requirements include electronic invoicing and receiving reports through the PIEE-WAWF system. The procurement is subject to various federal regulations, including Buy American certificates, cybersecurity safeguarding under DFARS 252.204-7012, and specific hazardous material labeling requirements.

SPRMM1 DLA Mechanicsburg

POSTED

about 11 hours ago

DEADLINE

in about 1 month

Specialized PCB Fabrication (NSN 5998016434816)This subcontract involves the fabrication of five Printed Circuit Boards for the DLA Weapons Support Active Devices Division under the Department of Defense. The manufacturer must produce the boards in strict accordance with the technical drawings and material specifications for NSN 5998016434816, with a specific requirement that no mercury be intentionally added during the process. To qualify, the contractor must possess fabrication equipment capable of meeting military-grade specifications and maintain a CMMC Level 2 Self-Assessment. The project is categorized under NAICS code 334412, with performance taking place in New Cumberland, Pennsylvania. The response deadline for this requirement is November 9, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 22 hours ago

DEADLINE

Supply of Circuit Card Assemblies (NSN 5998-01-736-8074)This subcontract through the DLA Weapons Support Maritime Supply Chain requires the delivery of 100 Circuit Card Assemblies under NSN 5998-01-736-8074. The contractor is responsible for manufacturing or sourcing these units according to Harting part number 09 14 012 3101 or Federal Equipment Co part number 7A20071. Performance will take place in New Cumberland, Pennsylvania, with a response deadline of November 9, 2026. Strict adherence to quality and regulatory standards is mandatory, including the DLA Master List, MIL-STD-2073-1E, and MIL-STD-129 for packaging. Additionally, the contractor must comply with NAVSEA 5100-003D regarding mercury containment, NIST SP 800-171 for cybersecurity, and the Buy American Act. The final deliverable consists of 100 fully packaged units meeting all specified technical and safety requirements.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 22 hours ago

DEADLINE

PRINTED CIRCUIT BOA

Solicitation # SPE7M5-27-T-1591

Solicitation SPE7M5-27-T-1591 is a small business set-aside request for quotations issued by the DLA Weapons Support Active Devices Division for the procurement of five printed circuit boards, identified by NSN 5998016434816. The required delivery date is March 2, 2027, with a delivery window of 112 days after the award. Shipping is FOB Origin, and the destination for both inspection and acceptance is the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to technical and quality standards, including CMMC Level 2 Self-Assessment and the prohibition of intentionally added mercury. Packaging is a critical requirement, necessitating DOD qualified Electrostatic Discharge and Electromagnetic Interference protective materials per MIL-PRF-81705 and MIL-STD-2073-1E to prevent damage to leads and terminals. Marking must comply with MIL-STD-129, specifically using special marking code 39 for ESD sensitive electronic devices. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 22 hours ago

DEADLINE

CIRCUIT CARD ASSEMBLY

Solicitation # SPE7M1-27-T-0840

Solicitation SPE7M1-27-T-0840 is a fixed-price request for quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of eight GE FANUC Embedded Systems Inc. circuit card assemblies, part number PMC942RC, under NSN 5998-01-628-2855. The requirement falls under NAICS code 334412. The need ship date is June 12, 2027, with an original required delivery date of June 6, 2027. Delivery is established as FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to technical and quality requirements listed in the DLA Master List, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Special safety and security provisions apply, including a prohibition on intentionally added mercury per NAVSEA 5100-003D, a requirement for CMMC Level 2 Self-Assessment, and compliance with Covered Defense Information standards. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American and Balance of Payments Program. All quotations must be submitted via the DIBBS portal.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 22 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA Land And Maritime

Same awarding agency

INSULATING COMPOUND,ELECTRICAL

Solicitation # CM26161009

This pre-solicitation notice, issued by DLA Land and Maritime (SPE7MX), seeks offers for electrical insulating compound under National Stock Number 5970-002957568. The requirement is for a specific type HF compound in one gallon cans, conforming to specification MIL-DTL-3064C (or MIL-I-3064). The government is considering an Indefinite Delivery Contract (IDC) structure, typically featuring a three-year base period with the possibility of two to four one-year option periods. The total annual demand quantity is 927 gallons, with price break ranges solicited from 58 to 1,392 gallons. The solicitation is expected to be available on DIBBS on or after October 30, 2026, with a final response date of December 2, 2026. Performance will take place in Columbus, Ohio, with a required delivery timeframe of 45 days. Award decisions will be based on a combination of price, delivery, past performance, and other evaluation factors. This acquisition follows simplified acquisition procedures for commercial items under FAR Part 12.201. Because the government does not possess complete technical data, it intends to contract only with approved sources under 10 U.S.C. 3204(a)(1). All offers must be submitted in English and in U.S. dollars.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

in about 1 month

HEADSET-MICROPHONE : NSN 5965-01-204-8505

Solicitation # SPE7MX26RX089

This acquisition is for the procurement of microphone headsets under NSN 5965-01-204-8505 with an estimated annual demand quantity of 982 units. The contract will be structured as a Firm-Fixed Price Indefinite Delivery Contract consisting of a three-year base period with two one-year options. This is an unrestricted solicitation governed by FAR Part 12.201 for commercial items and is subject to the Buy American Act. The NAICS code for this requirement is 334310 with a size standard of 750. The solicitation is expected to be issued around October 30, 2026, with responses due by November 30, 2026. Delivery is required within 426 days after the date of order, and shipping is designated as FOB Origin. Award decisions will be based on a combination of price, delivery, and performance. Interested parties can access technical data via the TDMT landing page and should submit their offers in US dollars through the DIBBS system or via email to the contract specialist.

Audio and Video Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

Solicitation # SPE7MX26RX102

DLA Land and Maritime is seeking offers for a Firm-Fixed Price Indefinite Delivery Contract for Marine Hatches, identified by NSN 2040-01-357-9117. This acquisition is a 100 percent Small Business Set-Aside under NAICS code 332510, with an estimated annual demand quantity of 20 units. The contract structure consists of a three year base period followed by two option years, and all items must comply with the Buy American Act and specific technical drawings available via TDMT. The solicitation is expected to be issued around October 30, 2026, with a response deadline of November 30, 2026. Required delivery is within 241 days after the date of an order, and shipping is FOB Origin. Award decisions will be based on a combination of price, delivery, and performance. Interested parties should submit their offers in US dollars and English through the DIBBS system or via email to the contract specialist, Brandon Preece.

Hardware Manufacturing

POSTED

DEADLINE

in about 1 month

Supplier for Component NSN 015715718This subcontract through DLA Land and Maritime requires the manufacture or distribution of 603 units of hardware component NSN 015715718. The supplier must ensure all components meet strict government specifications, including the application of MIL-STD-129 markings and the use of standard commercial packaging. Additionally, the provider is required to submit proof of commerciality in accordance with FAR Part 12. The completed materials are to be delivered to prime contractors located in Columbus, Ohio. This opportunity falls under NAICS code 332999 and is managed by the Department of Defense. Interested parties must adhere to the specified response deadline of October 29, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

in about 13 hours

Supplier for Component NSN 016603400This subcontract with DLA Land and Maritime requires the manufacture or distribution of 1,169 units of hardware component NSN 016603400. The supplier must ensure all components comply with government specifications and are delivered to Columbus, Ohio. The contractor is responsible for applying MIL-STD-129 markings and utilizing standard commercial packaging. Additionally, the supplier must provide proof of commerciality in accordance with FAR Part 12. This requirement falls under NAICS code 332999.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

in about 13 hours

Oshkosh Wholistic Sole Source Project

Solicitation # 75Q65

DLA Land and Maritime, specifically the Strategic Acquisitions office, is conducting market research for a potential Indefinite Delivery Indefinite Quantity (IDIQ) long term contract under solicitation 75Q65. The project focuses on the procurement of components and support for the Oshkosh MRAP-All Terrain Vehicle (M-ATV), including SOCOM variants and Mine Resistant Vehicles. Required items encompass a wide range of vehicular components, such as structural body parts, mechanical and electrical systems like wiring harnesses and fluid filters, and various specialized hardware and mounting brackets. While Oshkosh Defense is currently the only approved source, the agency is seeking additional manufacturers capable of producing these items. The procurement will be evaluated and awarded on a per NSN/CLIN basis, with specific requirements for standard commercial packaging and MIL-STD-129 markings. Interested parties must submit a Market Research Questionnaire by October 28, 2026, providing details on their business size, manufacturer status, and distribution networks. The performance location is listed as Columbus, Ohio, and the effort falls under NAICS code 332999. Estimated buy quantities have been identified for various components, though a total contract value has not yet been established.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

in about 13 hours

Specialized Maintenance ToolingThis subcontract opportunity with the Department of Defense, specifically for DLA Land and Maritime, involves the manufacture and supply of specialized maintenance tooling for diesel engines. The selected provider will be responsible for fabricating diagnostic equipment and specialized hand tools that meet or exceed original equipment manufacturer quality specifications, ensuring all deliverables align with specific National Stock Numbers. The procurement falls under NAICS code 332212 and is intended to support prime contractors delivering on DLA Land and Maritime supply contracts. Interested parties must note the response deadline of November 4, 2026, to submit their proposals for this specialized fabrication requirement.

Hand and Edge Tool Manufacturing

POSTED

DEADLINE

Engine Gaskets and Seal KitsThis subcontract opportunity involves the manufacture and supply of sealing components and comprehensive repair kits for prime contractors supporting DLA Land and Maritime. The scope of work includes the fabrication of gaskets and O-rings, as well as the assembly of multi-part diesel engine repair kits identified by specific National Stock Numbers. To be eligible, providers must obtain DLA Approved Source qualification to ensure all products meet or exceed original equipment manufacturer quality specifications. The solicitation was posted on October 20, 2026, with a response deadline of November 4, 2026.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Fuel Injection and Fluid System ComponentsThis subcontract opportunity with DLA Land and Maritime involves the manufacture and supply of precision fuel delivery and fluid control components. The scope of work includes the precision machining and calibration of specific parts such as metering pumps, safety relief valves, calibrated flow valves, and fuel injection nozzles, all identified by specific National Stock Numbers. To be eligible, providers must obtain DLA Approved Source qualification to ensure all components meet or exceed original equipment manufacturer quality specifications. The solicitation was posted on October 20, 2026, with a response deadline of November 4, 2026, falling under NAICS code 333618.

Other Engine Equipment Manufacturing

POSTED

DEADLINE

Heavy Engine Component ManufacturingThis subcontract for Heavy Engine Component Manufacturing involves the production and supply of high-tolerance structural diesel engine parts, including cylinder heads, camshafts, connecting rods, and vibration dampeners. The selected provider will perform casting, machining, and finishing services to support prime contractors fulfilling DLA Land and Maritime supply contracts. All delivered components must be identified by specific National Stock Numbers and meet or exceed original equipment manufacturer quality specifications. To qualify for this opportunity, providers must submit a Source Approval Request through the DLA Alternate Offer program. The contract falls under NAICS code 332710 and is managed by the Department of Defense. Interested parties must submit their responses by the deadline of November 4, 2026.

POSTED

DEADLINE

MULTI NSN DIESEL ENGINE

Solicitation # CM26259595

DLA Land and Maritime is conducting a sources-sought market survey under solicitation CM26259595 to identify potential manufacturers for a wide array of diesel engine components and assemblies. The scope of work includes the procurement of various parts identified by National Stock Numbers, such as cylinder heads, camshafts, connecting rods, fuel injection nozzles, gaskets, and specialized maintenance tools. Interested parties must provide the location of the manufacturer and relevant points of contact to Contract Specialist Zachary Mullins by the response deadline of November 4, 2026. Companies seeking to be qualified as an Approved Source must submit a Source Approval Request through the DLA Land and Maritime Alternate Offer program. This application package must include all necessary technical data to demonstrate that the prospective contractor can manufacture products that meet or exceed the quality of the Original Equipment Manufacturer. The process is categorized under NAICS code 333618, and the primary objective is to identify capable sources who can provide the specific engine components and repair kits detailed in the provided NSN list.

Other Engine Equipment Manufacturing

POSTED

DEADLINE

VALVE, REGULATING, FL

Solicitation # CM26163006

DLA Weapons Support is conducting a sources sought action under project number CM26163006 to identify potential manufacturers for a regulating fluid valve, identified by NSN 4810010865757. The agency is seeking to establish a long-term contract with an estimated annual quantity of 301 units. This opportunity falls under NAICS code 332912 for Fluid Power Valves and Hose Fittings manufacturing, with a small business size standard of 1,000 employees. Because the agency does not possess the drawings or specifications for these items, interested parties must submit the required documentation per DLAD 52.217-9002 to become approved sources. Prospective bidders are required to complete a market survey and spreadsheet, providing manufacturer locations and points of contact. All responses must be submitted to Kristina Blanton by October 29, 2026.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

59--CIRCUIT CARD ASSEMB

Solicitation # SPE7M126T099D

DLA Land And Maritime

POSTED

CLOSED

CIRCUIT CARD ASSEMB

Solicitation # SPRMM126QMA74

SPRMM1 DLA Mechanicsburg

POSTED

CLOSED

59--BACKPLANE ASSEMBLY

Solicitation # SPE7M126T047C

DLA Land And Maritime

POSTED

DEADLINE

59--PC IO SPECL COMPASS

Solicitation # SPE4A626Q0832

POSTED

DEADLINE

59--CIRCUIT CARD ASSEMB, IN REPAIR/MODIFICATION OF

Solicitation # N0010425QDE09

Navsup Weapon Systems Support Mech

POSTED

CLOSED

CIRCUIT CARD ASSEMB

Solicitation # SPRPA126QZB26

Pa DLA Aviation At Philadelphia

POSTED

CLOSED

59--QBUS INTERFACE TO I

Solicitation # N0010422QNH54

Navsup Weapon Systems Support Mech

POSTED

CLOSED

47--COUPLING HALF,QUICK

Solicitation # SPE7M326T6080

DLA Land And Maritime

POSTED

CLOSED

59--CIRCUIT CARD ASSEMB

Solicitation # SPE7M126T086Y

DLA Land And Maritime

POSTED

CLOSED

Solicitation # N0038326RHA46

Navsup Weapon Systems Support

POSTED

DEADLINE

59--FUSE,CARTRIDGE

Solicitation # SPE7M226T4269

DLA Land And Maritime

POSTED

DEADLINE

5998 - This is a FMS requirement for the repair of NSN 7RH 5998 014857327.

Solicitation # N0038326QH058

Navsup Weapon Systems Support

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS