59--CIRCUIT CARD ASSEMB

Circuit Card Assembly Fabrication and AssemblyThis subcontract involves the full manufacture and assembly of five Circuit Card Assemblies for prime contractors supporting DLA Mechanicsburg projects. The work must be performed according to Cage Code 1EG52 and reference ROF61205/4, with all assemblies marked in compliance with MIL-STD-130, REV N. The selected provider is required to utilize SMT and through-hole equipment and maintain strict ESD protection protocols to deliver five completed and tested units. Eligible candidates must be an OCM/OEM, a QPL/QML source, or an authorized distributor holding CMMC Level 1 certification. This opportunity falls under NAICS code 334412 and is managed by the Department of Defense through SPRMM1 DLA Mechanicsburg. Responses are due by November 27, 2026.

POSTED

DEADLINE

Solicitation # N0010426QQA90

POSTED

DEADLINE

Solicitation N0010426QQA90, issued by the Navsup Weapon Systems Support Mech, is a request for the manufacture and procurement of a Circuit Card Assembly. The requirement specifies that the item must conform to the design represented by Cage Code 53711, reference number 6166858, and must be physically identified in accordance with MIL-STD-130, Rev N. The contract is issued as a buy, with the resulting award to be executed bilaterally. All freight is designated as FOB Origin, and accelerated delivery is encouraged. Government source inspection is required, and the contractor is responsible for maintaining all inspection records for 365 calendar days following final delivery. Offerors who are not the original equipment manufacturer must provide official authorization from the OEM to be considered for award. The solicitation incorporates various federal regulations, including the Buy American-Balance of Payments Program and Small Business Subcontracting plans. Packaging must comply with MIL-STD 2073. While the initial response deadline was listed as February 1, 2027, Amendment 0002 has extended the deadline for the receipt of offers to 4:30 PM local time on April 30, 2026. All proposals must be submitted to the NAVSUP office in Mechanicsburg, Pennsylvania, and must include acknowledgment of all amendments.

Solicitation # SPRMM126QHC38

POSTED

DEADLINE

This solicitation, issued by DLA Mechanicsburg under number SPRMM1-26-Q-HC38, seeks the manufacture and delivery of the KIT,CCA,CONROLLER (NIIN 016603072). The requirement specifies that the item must conform to the designs represented by Cage Codes 53711 and 30SS9. Delivery is required as soon as possible (ASAP) with FOB Destination terms. The government intends to make a single award based on a best-value determination where past performance, evaluated via the Supplier Performance Risk System (SPRS), is considered more important than price. The contract mandates strict adherence to quality and marking standards, including MIL-STD-130 for physical identification and MIL-STD-2073 for packaging. Inspection and acceptance will occur at the origin, with the contractor remaining responsible for all inspection requirements. Invoicing and receiving reports must be submitted electronically through the PIEE-WAWF system. Additional compliance requirements include Item Unique Identification (IUID) per DFARS 252.211-7003, cybersecurity protections under DFARS 252.204-7012, and various Buy American and small business representations.

Solicitation # SPRMM126QGF14

POSTED

DEADLINE

Solicitation SPRMM1-26-Q-GF14, issued by NAVSUP Weapons Systems Support for the Department of Defense, is a request for the manufacture and delivery of one Multi-Purpose Serve (NSN 5998-01-705-5773). The procurement is a fixed-price effort requiring the contractor to adhere to strict quality assurance and physical identification standards, specifically MIL-STD-130 Rev N. While drawings and technical data are unavailable, the item must match the design represented by Cage Code 4NCQ6. Offerors who are not the original equipment manufacturer must identify the OEM and their CAGE code, and authorized distributors must provide signed proof of authorization on company letterhead. Quotes must remain valid for 60 days and may require an informal cost breakdown to determine fair and reasonable pricing. The contract mandates rigorous packaging and marking protocols per MIL-STD-2073 and MIL-STD-129, with specific requirements for CONUS and OCONUS shipments and electrostatic discharge protection where applicable. Inspection and acceptance are conducted at the source, and the contractor is responsible for maintaining inspection records for 365 days post-delivery. Administrative requirements include the mandatory use of PIEE-WAWF for the electronic submission of combined invoice and receiving reports. Evaluation of offers will be based on the Supplier Performance Risk System (SPRS), focusing on item, price, and supplier risk, with a strict prohibition on the use of additive manufacturing unless specifically authorized. Delivery is designated for the DLA Distribution DDSP New Cumberland facility in Pennsylvania.

Solicitation # SPRMM127QKA49

POSTED

DEADLINE

Solicitation SPRMM127QKA49, issued by NAVSUP Weapon System Support for the Department of Defense, seeks the manufacture and delivery of five Circuit Card Assemblies (NSN 5998-20-007-0323). The required items must conform to the design represented by Cage Code 1EG52, reference number ROF61205/4. Award will be determined based on the Lowest Price Technically Acceptable (LPTA) criteria, with the government utilizing the Supplier Performance Risk System (SPRS) to evaluate item, price, and supplier risk. Offerors who are not the Original Equipment Manufacturer (OEM) must identify the OEM and their associated CAGE code. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-130 for physical identification and MIL-STD-2073-1 for preservation and packaging. Specific requirements include electrostatic discharge protection per ANSI/ESD S20.20-2021 for sensitive items and marking in accordance with MIL-STD-129. Inspection and acceptance will occur at the origin. Contractors are required to use the Wide Area WorkFlow (WAWF) system for electronic submission of invoices and receiving reports. Additionally, the solicitation specifies a CMMC Level 1 self-certification requirement and prohibits the procurement of assemblies manufactured, assembled, or delivered from a Covered Nation.

Solicitation # SPRMM126RHB33

POSTED

DEADLINE

Solicitation SPRMM126RHB33 is a firm-fixed-price procurement issued by DLA Mechanicsburg for the manufacture of Module Assembly, Rim (NSN 5998-01-625-8080). The requirement is unrestricted and has undergone several amendments, ultimately increasing the total quantity to 37 units and extending the offer due date to January 29, 2027. Award will be granted to the responsible offeror providing the lowest priced, technically acceptable offer, with evaluations incorporating the Supplier Performance Risk System to assess item, price, and supplier risk. The contract mandates strict adherence to quality and security standards, requiring contractors to maintain a Secret level security clearance in accordance with DD Form 254 and comply with ANSI/ESD S20.20 for electrostatic discharge control. All deliverables must be physically identified per MIL-STD-130 and packaged according to MIL-STD-2073-1 and MIL-STD-129. Inspection is conducted at the origin by the Contract Administration Office, and the contractor must maintain inspection records for 365 days post-delivery. Administrative requirements include the electronic submission of receiving reports and invoices through the Wide Area WorkFlow system.

F-16 Circuit Card Assembly

POSTED

DEADLINE

Solicitation # SPRHA4-27-R-0952

Ut DLA Aviation At Ogden

POSTED

DEADLINE

Solicitation # N0038327QAA13

Solicitation N00383-27-Q-AA13, issued by NAVSUP Weapon Systems Support Philadelphia, is a request for quotations for the overhaul, upgrade, repair, testing, and inspection of various printed circuit boards and assemblies. The scope includes five specific line items, including printed circuit boards and circuit card assemblies with NSNs 5998-01-512-3463, 015123482, 015215180, 1680-01-619-4547, and 5998-01-620-1746. The objective is to return these assets to a Ready for Issue condition. The government intends to make a single award based on a combination of price and past performance, with past performance weighted as the more important factor. The contractor is responsible for providing all labor, materials, and tooling, with a strict prohibition on the use of MIL-W-81381 wire in favor of SAE-AS22759 series wire. Key performance requirements include adherence to Repair Turnaround Times and the use of the Commercial Asset Visibility system for reporting. Quality standards are rigorous, requiring compliance with ISO 9001/SAE AS9100 and specific calibration standards such as ANSI/NCSL Z540.3. The contract includes detailed provisions for Beyond Economical Repair and Over and Above Repair determinations, both of which require written concurrence from DCMA. Packaging must meet MIL-STD-2073-1 and MIL-STD-129 standards, and all invoicing must be processed electronically through the Wide Area Workflow system.

Navsup Weapon Systems Support

POSTED

DEADLINE

ELECTRONIC COMPONEN — 5998016746980 — SPRMM127QKA52

Solicitation # SPRMM127QKA52

Solicitation SPRMM1-27-Q-KA52, issued by NAVSUP Weapon Systems Support for the Department of the Navy, seeks the procurement of one electronic component identified by NSN 5998-01-674-6980 and NIIN 016746980. The item must conform to the design represented by Cage Code 04JN4, reference number A0091563. Award will be granted to the responsible offeror submitting the lowest priced, technically acceptable offer, with evaluations considering item, price, and supplier risk via the Supplier Performance Risk System. Offerors who are not the original equipment manufacturer must provide the OEM's CAGE code and part number. The contract mandates strict adherence to quality and safety standards, including physical identification per MIL-STD-130 and packaging according to MIL-STD-2073. A critical requirement is that the material must be mercury-free to prevent corrosion and toxicity on submarines and surface ships. Inspection and acceptance will occur at the origin, and the contractor must maintain inspection records for 365 days following final delivery to Manassas, Virginia. Administrative requirements include electronic invoicing and receiving through the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses regarding cybersecurity, trade agreements, and hazardous material labeling.

Specialized PCB Fabrication (NSN 5998016434816)This subcontract involves the fabrication of five Printed Circuit Boards for the DLA Weapons Support Active Devices Division under the Department of Defense. The manufacturer must produce the boards in strict accordance with the technical drawings and material specifications for NSN 5998016434816, with a specific requirement that no mercury be intentionally added during the process. To qualify, the contractor must possess fabrication equipment capable of meeting military-grade specifications and maintain a CMMC Level 2 Self-Assessment. The project is categorized under NAICS code 334412, with performance taking place in New Cumberland, Pennsylvania. The response deadline for this requirement is November 9, 2026.

POSTED

DEADLINE

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 12 days

AI Contract Overview

This contract pertains to the procurement of 105 units of a circuit card assembly (NSN 7H-5998-016767703), under the reference number SPR106B-100 and TDP version 001, for delivery FOB origin. The solicitation is managed by NAVSUP Weapon Systems Support Mechanicsburg, Department of the Navy, with primary contact Nicole Diehl. The contract requires strict adherence to military and federal specifications, standards, and qualification requirements at the time of award, as outlined in the associated FAR clause 52.209-1. Offerors must ensure product or manufacturer qualification prior to award, with all official documents and standards available through DoD Single Stock Point (DODSSP) and the ASSIST-Online platform. Award will proceed only if the supplier or manufacturer meets all required qualifications. While this solicitation is not conducted under FAR Part 12 for commercial items, interested parties have a 15-day window to propose commercial equivalents if available. Supporting documentation, such as patterns, drawings, or deviation lists, are not centrally stocked and must be sourced as directed. The response deadline for this presolicitation notice is September 30, 2025, with full details and communication facilitated via the provided government contact channels and online resources.

General Info

Procurement of 105 circuit card assemblies, strict military standards, qualification required, deadline September 30, 2025.

Agency

Department Of Defense → Navsup Weapon Systems Support Mech

NAICS

334412 - Bare Printed Circuit Board Manufacturing

Place of Performance

Set-Aside

NONE

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

2 updates

PhaseClosed

PostedDec 12

Presolicitation

Type ChangedDec 30

Presolicitation → Solicitation

Type ChangedApr 1

Solicitation → Presolicitation

Type ChangedApr 1

Presolicitation → Solicitation

Notice updatedApr 1

The notice description changed.

Type ChangedSep 3

Solicitation → Presolicitation

Type ChangedSep 3

Presolicitation → Solicitation

Notice updatedSep 3

The notice description changed. The point of contact changed.

Type ChangedOct 17

Solicitation → Presolicitation

Type ChangedOct 17

Presolicitation → Solicitation

Response DeadlineOct 23

Deadline has passed

Submission Closed

10/23/2025, 06:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

Contacts1 person available

OfficeMECHANICSBURG, PA, 17050-0788, USA

Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

Office AddressMECHANICSBURG, PA, 17050-0788, USA

Contacts

contact@example.gov

+1 (555) 000-0000

Full Description

https://api.sam.gov/prod/opportunities/v1/noticedesc?noticeid=e74eaa968c9e4f549091a79d905b21dc

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

NAICS: 326199

New

Federal

QPL-Qualified O-Ring SupplyThis subcontract involves the supply of high-performance O-rings for prime contractors supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The primary requirement is the procurement of O-rings exclusively from Qualified Products List manufacturers, with a mandatory certification of qualification according to MIL-PRF-25732E standards. The opportunity is categorized under NAICS code 326199 and was posted on October 28, 2026. Interested parties must submit their responses by the deadline of November 27, 2026.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

Specialized Fastener Supply (Hex Cap Screws)This subcontract involves the procurement and delivery of military-grade Type I Hex Cap screws for prime contractors supporting Navsup Weapon Systems Support Mech projects. All supplied fasteners must be manufactured in strict accordance with MIL-DTL-1222 specifications to meet Department of Defense requirements. The opportunity is categorized under NAICS code 332722 and was posted on October 28, 2026. Interested parties must submit their responses by the deadline of November 27, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Nickel-Aluminum-Bronze Material SupplyThis subcontract involves the supply of raw Nickel-Aluminum-Bronze material to prime contractors supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The supplier is responsible for delivering raw stock that strictly adheres to ASTM B150/B150M chemical and physical property standards. A critical requirement of the contract is the provision of certified mill certifications to verify the material composition and origin, with a specific mandate that all supplied material must be certified mercury-free. The opportunity is categorized under NAICS code 423510, with a response deadline set for November 27, 2026.

Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

DEADLINE

Gland Actuator Fabrication and AssemblyThis subcontract involves the precision machining and assembly of three Gland Actuators for Navy submarine projects under the Navsup Weapon Systems Support Mech. The scope of work includes machining components according to technical drawings, executing First Article Testing and Inspection, and performing NDT liquid penetrant inspection within a mercury-free environment. To be eligible, contractors must hold ISO 9001 or MIL-I-45208 certification and ensure full compliance with MIL-STD-130 and MIL-STD-973 standards. The opportunity was posted on October 28, 2026, with a response deadline of November 27, 2026, falling under NAICS code 332710 for the Department of Defense.

POSTED

DEADLINE

Precision Bearing Supply for Valve AssemblyThis subcontract involves the supply of high-precision ball or roller bearings for prime contractors supporting NAVSUP Weapon Systems Support Mechanicsburg valve restoration projects. The provider must deliver certified bearings that meet the exact technical specifications for NIIN 015505005, ensuring all components are suitable for valve assembly under NAICS code 332510. A critical requirement of the agreement is strict adherence to the Buy American and Trade Agreements Act, necessitating that all delivered products originate from qualifying countries. The contract was posted on October 28, 2026, with a response deadline of November 2, 2026, for the Department of Defense.

Hardware Manufacturing

POSTED

DEADLINE

Valve Assembly Repair and OverhaulThis subcontract involves the technical repair and restoration of a Valve Assembly (NIIN: 015505005) to support prime contractors on NAVSUP Weapon Systems Support Mechanicsburg projects. The scope of work includes the disassembly, inspection, and refurbishment of internal components to ensure they meet original specifications. To guarantee functional compliance, the contractor must perform pressure testing and apply IUID data matrix marking in accordance with DFARS 252.211-7003. The final deliverable is one fully repaired and certified Valve Assembly with completed IUID registration. This project falls under NAICS code 811210 and is managed by the Department of Defense. Interested parties should note the response deadline of November 2, 2026.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Ultrasonic and Dye Penetrant Inspection ServicesThis subcontract for Ultrasonic and Dye Penetrant Inspection Services involves providing non-destructive testing for prime contractors supporting NAVSUP Weapon Systems Support projects. The scope of work includes performing ultrasonic inspections on starting materials and dye penetrant surface inspections on finished Union and Tailpiece components. All testing must be conducted using approved UT equipment and PT kits in strict accordance with EB Specification 2937 and NAVSEA T9074-AS-GIB-010-271. The contractor is responsible for delivering all required testing certifications and Certification Data CDRLs utilizing DD Form 1423. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense. Interested parties should note the response deadline of November 9, 2026.

Testing Laboratories and Services

POSTED

DEADLINE

Manufacturing of Tailpiece, Union (NSN 4730-01-651-0817)This subcontract involves the manufacture of 35 Tailpiece, Union units (NSN 4730-01-651-0817) for prime contractors supporting NAVSUP Weapon Systems Support projects. The scope of work requires precision machining and fabrication utilizing CNC equipment in strict accordance with Technical Data Package Version 002. The project is governed by NAICS code 332710 and falls under the jurisdiction of the Department of Defense. Critical compliance requirements include adherence to Special Emphasis Level I quality control, the Buy American Act, and DPAS DO ratings. All finished units must be packaged and marked according to MIL-STD-2073 and MIL-STD-129 standards, respectively. Final delivery is designated as FOB Destination to Portsmouth NSY.

POSTED

DEADLINE

Specialized Material Supply for Valve FabricationThis subcontract, titled Specialized Material Supply for Valve Fabrication, involves the procurement and delivery of raw metals and specialized alloys for prime contractors working on Department of the Navy valve fabrication projects. The supplier is responsible for sourcing materials that strictly adhere to design reference 21321-001 specifications and delivering these certified materials directly to the manufacturer. To ensure full compliance with government standards and DFARS 252.225-7036 Buy American Act requirements, the provider must supply all necessary Mill Test Reports and Material Safety Data Sheets. Managed under the Department of Defense via Navsup Weapon Systems Support Mech, the opportunity is categorized under NAICS code 332999, with a response deadline set for November 12, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Manufacture of Linear Direct ValvesThis subcontract involves the manufacture of five Linear Direct Valves for prime contractors working on Department of the Navy projects. The scope of work includes the fabrication of valve bodies and internal components utilizing precision CNC machining to ensure strict adherence to design reference 21321-001 and Cage Code 78062 specifications. Additionally, the contractor is responsible for applying Item Unique Identification to all parent items and subassemblies. The project is managed under the Department of Defense through the Navsup Weapon Systems Support Mech agency. Compliance with DFARS 252.225-7036 Buy American standards is mandatory for the delivery of the units, which are identified by NIIN 014108012. The contract falls under NAICS code 332911.

Industrial Valve Manufacturing

POSTED

DEADLINE

Supply of Self-Locking Nuts (NASM 17828-6C)This subcontract with the Department of Defense, specifically for the Navsup Weapon Systems Support Mech, requires the procurement of 368 self-locking nuts. The contractor is responsible for manufacturing or sourcing components that strictly adhere to NSN 5310-01-540-9579 and Part Number NASM 17828-6C according to TDP Version 006. The agreement mandates strict quality and logistical standards, including permanent traceability markings per MIL-STD-792 and packaging compliant with MIL-STD-2073. Additionally, the provider must submit IUID reporting through WAWF and furnish certificates of compliance for all Special Emphasis Material.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

DEADLINE

Custom Cable Assembly FabricationThis subcontract involves the custom fabrication of five cable assemblies for prime contractors supporting Department of the Navy projects under the Navsup Weapon Systems Support Mech. The contractor is responsible for manufacturing the assemblies according to Sippican Drawing D248895-1 Rev F and DGO Drawing 1155130-114, which includes performing all necessary electrical and mechanical testing to ensure operational integrity. To qualify, the provider must maintain ISO 9001 certification and ensure full compliance with Buy American requirements. All deliverables must adhere to MIL-STD-129 P and MIL-STD-130 N marking standards. The opportunity is categorized under NAICS code 335999, with a response deadline set for November 2, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 5 days

View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 334412

Closed

Federal

59--CIRCUIT CARD ASSEMB

Solicitation # N0010425QYJ29

Solicitation # N0010425QSB53

POSTED

CLOSED

Solicitation # SPE7M026T0606

POSTED

CLOSED

59--CIRCUIT CARD ASSEMB

Solicitation # SPE7M526U0005

POSTED

CLOSED

59--ELECTRONIC COMPONEN

Solicitation # SPE4A526T0656

POSTED

CLOSED

59--PRINTED CIRCUIT BOA

POSTED

CLOSED

Solicitation # N0010426QYA0P

Solicitation # N0010426QSA41

POSTED

CLOSED

Solicitation # N0010426QQA04

POSTED

CLOSED

Solicitation # SPE7M126U0141

POSTED

CLOSED

59--DISPLAY,OPTOELECTRO

Solicitation # SPE7M026T0497

POSTED

CLOSED

59--CIRCUIT CARD ASSEMB

Solicitation # SPE7M026T0512

POSTED

CLOSED

Solicitation # SPE7M526T1004

POSTED

CLOSED

59--INSTALLATION KIT,EL