59--Sources Sought for Fuel Pump, Metering and Distributing, NSN 910-01-171-6792.

CONTACT Greg Youll, General Engineer, +1 (555) 000-0000. This is a Market Survey to locate additional sources for the fuel injector pump used on the 5 & 10 kW Military Standard Generator sets. The part number for the pump is 50-2/4A-80A-9540A, CAGE 01843 . The pump is designed to work on both the 2 cylinder 5 kW Mil Std generator engine, Part Number 100-1344, CAGE 44940 and the 10 kW Mil Std Generator engines, Part Number 100-1345, CAGE 44940 & Part Number 100-1685, CAGE 44940. The current source for this pump is AMBAC International Corp., CAGE 01843. Detailed technical data for the manufacture or acceptance of these units are not available from the Army. Pumps supplied must be new. Suppliers capable of furnishing these units must so indicate, by writin g to Commander, USACECOM, ATTN: AMSEL-LC-CCS-G-GN, Building 1200W, Ft. Monmouth, NJ 07703-5023. The response must include documentation such as test results, copy of purchase order if the supplier is a vendor to the listed source or a statement from listed source demonstrating that the supplier can, in fact, supply the Army with a unit that will be physically and functionally interchangeable with the current unit. Successful supplier may be required to warrant that the item supplied will satisfactorilly pe rform when used for the purpose intended by the Army and/or successfully pass performance testing prior to production deliveries. For more information contact Greg Youll, +1 (555) 000-0000. The deadline for response is April 2, 2004. EMAIL ADDRESS: contact@example.gov}