Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

59--SWITCH CONNECTOR AY

Active
N0010426QED07Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the manufacture of four units of Switch Connector AY, identified by NSN 1H-5930-016528200-X3 and part number N0010426X7552, to be produced in strict accordance with the IRPOD and Technical Data Package Version 002. Delivery is required 180 days after contract award, with shipments destined to two DLA distribution points: W25G1U in New Cumberland, Pennsylvania, and W62G2T in Tracy, California. The solicitation number is N00104-26-Q-ED07, and all proposals must be submitted complete and signed prior to the deadline of September 22, 2026. This acquisition is fully reserved for small business concerns as defined under FAR Clause 52.219-6, and government source inspection is mandatory. Technical documentation including drawings and IRPOD is accessible only through the Logistics.UNNPP.GOV portal, requiring pre-registration, and no hard copies will be mailed. Military and federal specifications can be obtained via ASSIST-online or the DOD Single Stock Point in Philadelphia, with internet access needed for most downloads. Offers must be in English and U.S. dollars, and although the product is subject to international trade agreements, the procurement does not follow commercial item acquisition policies under FAR Part 12. The responsible office is the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, with Blake V. Barrick as the primary point of contact for inquiries and solicitation materials.

General Info

Four Switch Connector AY units due in 180 days for small business, delivered to PA and CA, strict technical compliance required.

Agency

Department Of Defense → Navsup Weapon Systems Support MechView Agency

NAICS

334417 - Electronic Connector ManufacturingView NAICS

Place of Performance

PA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhasePresolicitation
Posted

Presolicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech
Contacts1 person available
OfficeMECHANICSBURG, PA, 17050-0788, USA
Organization / Agency
Department Of Defense → Navsup Weapon Systems Support Mech
View Agency Profile
Office AddressMECHANICSBURG, PA, 17050-0788, USA
Contacts

Full Description

Show more
NSN 1H-5930-016528200-X3, TDP VER 002, QTY 4 EA, DELIVER TO W25G1U, W1A8 DLA DISTRIBUTION, NEW CUMBERLAND, PA 17070-5002, DELIVER TO W62G2T, W1A8 DLA DIST SAN JOAQUIN, TRACY, CA 95304-5000. 1. THIS REQUIREMENT IS FOR THE MANUFACTURE OF 4 EA SWITCH CONNECTOR AY, NSN 1HM 5930 016528200 X3, P/N N0010426X7552 IAW THE IRPOD/TDP. THE REQUIRED DELIVERY IS 180 DAYS AFTER THE DATE OF CONTRACT. 2. THE SOLICITATION NUMBER IS N00104-26-Q-ED07. TO OBTAIN A COPY OF THE SOLICITATION, CONTACT THE CONTRACT SPECIALIST LISTED BELOW AND PROVIDE YOUR CAGE CODE. BLAKE BARRICK BLAKE.V.BARRICK.CIV@US.NAVY.MIL 771-229-3721. 3. ALL RESPONSIBLE SOURCES MAY SUBMIT A PROPOSAL WHICH SHALL BE CONSIDERED IF IT IS SUBMITTED WITH THE REQUIREMENTS OF THE SOLICITATION. 4. IN ORDER FOR YOUR OFFER TO BE CONSIDERED, YOU MUST SUBMIT THE ENTIRE RFQ COMPLETED AND SIGNED, PRIOR TO THE CLOSING DATE/TIME LISTED ON THE RFQ. 5. GOVERNMENT SOURCE INSPECTION IS REQUIRED. 6. THE PROPOSED ACQUISITION IS 100% SET ASIDE FOR SMALL BUSINESS CONCERNS (SEE FAR CLAUSE 52.219-6, NOTICE OF TOTAL SMALL BUSINESS SET-ASIDE). 7. TECHNICAL DOCUMENTS ASSOCIATED WITH THIS SOLICITATION, SUCH AS DRAWINGS, INDIVIDUAL REPAIR PART ORDERING DATA (IRPOD), STRS, AND OTHER PROCUREMENT RELATED DOCUMENTS MAY BE OBTAINED AT: HTTPS://LOGISTICS.UNNPP.GOV/ THIS WEBSITE REQUIRES A PASSWORD AND PRE-REGISTRATION. PLEASE CONTACT THE E-COMMERCE HELP DESK AT 518-395-4357 TO REGISTER OR FOR HELP LOGGING INTO THE WEBSITE. A HARD COPY OF THE IRPOD AND/OR DRAWINGS WILL NOT BE MAILED TO YOU. 8. INTERESTED PARTIES MAY OBTAIN COPIES OF MILITARY AND FEDERAL SPECIFICATIONS AND STANDARDS, QUALIFIED PRODUCTS LISTS (QPLs), QUALIFIED PRODUCT DATABASES (QPDs), MILITARY HANDBOOKS, AND OTHER STANDARDIZED DOCUMENTS FROM THE DOD SINGLE STOCK POINT (DODSSP) AT DOCUMENT AUTOMATION AND PRODUCTION SERVICE (DAPS) IN PHILADELPHIA, PA. NOTE: PATTERN, DRAWINGS, DEVIATION LISTS, PURCHASE DESCRIPTIONS, ETC. ARE NOT STOCKED AT DODSSP. MOST DOCUMENTS ARE AVAILABLE IN ADOBE PDF FORMAT FROM ASSIST -ONLINE AT: HTTP://ASSIST.DLA.MIL/ONLINE/START/ DOCUMENTS NOT AVAILABLE FOR DOWNLOADING FROM ASSIST CAN BE ORDERED FROM DODSSP USING THE ASSIST SHOPPING WIZARD, AFTER ESTABLISHING A DODSSP CUSTOMER ACCOUNT BY FOLLOWING THE REGISTRATION PROCEDURES OR BY PHONING THE DODSSP SPECIAL ASSISTANCE DESK AT 215-737-8000. USERS NOT HAVING ACCESS TO THE INTERNET MAY CONTACT THE DODSSP SPECIAL ASSISTANCE DESK AT 215-737-8000. 9. ONE OR MORE OF THE ITEMS UNDER THIS ACQUISITION IS SUBJECT TO THE WORLD TRADE ORGANIZATION GOVERNMENT PROCUREMENT AGREEMENT AND/OR FREE TRADE AGREEMENTS. ALL OFFERS SHALL BE IN THE ENGLISH LANGUAGE AND IN U.S. DOLLARS. ALL INTERESTED SUPPLIERS MAY SUBMIT AN OFFER. 10. BASED UPON MARKET RESEARCH, THE GOVERNMENT IS NOT USING THE POLICIES CONTAINED IN FAR PART 12, ACQUISITION OF COMMERCIAL ITEMS, IN ITS SOLICITATION FOR THE DESCRIBED SUPPLIES OR SERVICES.

Similar Contracts

Same NAICS industry code

NAICS: 334417
New
DIBBS
CABLE ASSEMBLY, RADI
Solicitation # SPE4A6-26-R-XC37
This contract is an Indefinite Delivery Purchase Order (IDPO) issued by the Defense Logistics Agency Aviation, Commodity Division, for the procurement of 140 cable assemblies, Radi, identified by NSN 5995-01-675-7639 and manufacturer part number 12006-7181-A30 from L3Harris Technologies, Inc. The base period spans five years with an estimated annual demand of 140 units and a guaranteed minimum quantity of 35 units per year, with a total contract ceiling of $350,000. Delivery orders may be issued for up to 140 units per order, with a required delivery window of 245 days after receipt of order, under FOB origin terms. The contract is firm fixed price with zero variance allowed in quantity. Inspection and acceptance occur at the destination, with the government retaining the right to reject the entire lot if product verification test samples fail at a government-designated lab; shipment is prohibited until acceptable test results are received unless otherwise directed. All items must be packaged and marked in strict accordance with MIL-STD-2073-1E and MIL-STD-129, including specific packaging codes, unit containers, and labeling directives. Special marking requirements mandate bold text on external packages stating “Product Verification Test Samples - Do Not Post to Stock” along with contract and lot numbers, and the special marking code is set to zero, indicating no additional markings. Packaging and palletization must adhere to DLA’s RP001 requirements, while documentation must include a hard copy of the system of record receiving report. Sampling and quality control follow MIL-STD-1916 or ASQ H1331 Table 1, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. All technical and quality requirements referenced by 'R' or 'I' numbers are incorporated from the DLA Master List, and the contractor must comply with regulations governing the removal of government identification from non-accepted supplies, physical item marking, and documentation for source approval requests. The contract includes mandatory DFARS clauses on whistleblower rights, antiterrorism training, litigation support restrictions, subcontracting with state sponsors of terrorism, hazard labeling, and payment instructions via WAWF. Offer
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 13 days
View Details

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

NAICS: 331210
New
Federal
47--PIPE, 8IN
Solicitation # N0010426RED38
This contract requires the manufacture of 2244 inches of 8-inch pipe conforming to NSN 1H-4710-016205542-X2 and military specification MIL-DTL-32386, Type 1, Schedule 40, as defined by the IRPOD/TDP. Delivery is due 180 days after contract award to the receiving officer in Kittery, ME 03904-5000. The solicitation number is N00104-26-R-ED38, with a response deadline of September 22, 2026, and only complete, signed responses submitted prior to the closing time will be considered. No NECO offers are accepted, and government source inspection is mandatory. Pre-production procedure submittals and Reports of Test Inspection (ROTI) are required. All technical documentation including drawings and IRPOD must be retrieved from the logistics.unnpp.gov website, which requires pre-registration and password access, with no hard copies provided by mail. Military and federal specifications can be obtained via DODSSP or assist.dla.mil, and internet access is strongly encouraged. The acquisition is fully set aside for small business concerns with no commercial item procedures applied, and all offers must be submitted in English and in U.S. dollars. Interested parties may contact Kiersten L. Sipe at the provided Navy email or phone number for solicitation details and must supply a CAGE code to access the full RFP.
Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 7 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 335314
New
Federal
59--SWITCH,ROTARY
Solicitation # N0010426QEC87
The contract solicitation seeks the manufacture of 12 rotary switches identified by NSN 1HM5932 under solicitation number N00104-26-Q-EC87, with deliveries required to two DLA distribution centers in New Cumberland, Pennsylvania, and Tracy, California. The requirement mandates full compliance with government inspection protocols and the submission of pre-production procedure documents, and only complete responses to the full RFP will be considered—NOEC offers are explicitly disqualified. Technical documentation including drawings, IRPOD, and STRS must be obtained through the logisitics.unnpp.gov portal, which requires pre-registration and password access, with assistance available via the e-commerce help desk. Military and federal specifications, QPLs, QPDs, and related standards can be accessed through DODSSP or assist.dla.mil, and non-downloadable items may be ordered via DODSSP’s shopping wizard or by phone. The government intends to award this contract under FAR 6.302 as a sole source procurement, and while interested parties may submit proposals within 45 days of publication, this notice is not a formal request for competitive bids. All submissions must be in English and denominated in U.S. dollars, and the acquisition does not follow FAR Part 12 commercial item policies. The point of contact is Blake V. Barrick of the Navy’s Naval Supply Systems Command, with the response deadline set for September 22, 2026.
Relay and Industrial Control Manufacturing

POSTED

about 7 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 333415
New
Federal
41--HLDG FR SUB ASSY
Solicitation # N0010426RBW67
This contract is a firm-fixed-price solicitation issued by the Naval Supply Systems Command Weapon Systems Support (NAVSUP WSS-MECH) under solicitation number N0010426RBW67 for the procurement of a holding frame assembly, identified by the nomenclature "HLDG FRAME ASSY" in place of "HLDG FR SUB ASSY." The solicitation is set aside for small businesses and requires strict compliance with technical, quality, and packaging specifications outlined in the Individual Repair Part Ordering Data (IRPOD), drawings, technical data, and referenced military specifications accessible through the BPMI e-Commerce website, which requires pre-registration. Contractors must adhere to an established order of precedence for resolving document conflicts, with contract amendments taking priority over schedules, terms, and referenced standards. The IRPOD governs quality assurance requirements, and contractors are obligated to maintain inspection records available for government review throughout the contract term. Packaging must comply with MIL-PRF-23199 and related cleanliness standards, and the use of MIL-DTL-24466 green poly bags is permitted only under specific conditions. Mercury or mercury-containing compounds are strictly prohibited from contact with the supplied hardware. Pricing is valid for 60 days following the closing date of August 7, 2026, and all contractual documents are deemed issued upon electronic transmission or mail delivery. The contractor must submit a Certificate of Compliance per DI-MISC-81356 at the time of material delivery, with separate certificates for each contract line item combination. Technical data packages are required and must be submitted in accordance with the DD Form 1423 structure, including specified delivery frequencies, distribution statements, and approval codes. Any deviations from contractual requirements must be pre-approved by the contracting officer with full technical justification, including evidence that the proposed change does not affect form, fit, function, or quality. The contract mandates compliance with cybersecurity maturity model certification levels, equal opportunity provisions for veterans and workers with disabilities, and prohibition of unapproved subcontracting. The point of contact for inquiries is listed as Collin A. Browning, with all responses required to be submitted via the SAM.gov portal by the deadline.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
New
Federal
44--BUNDLE ASSY
Solicitation # N0010426RTB95
The contract involves the procurement of 21 units of a bundle assembly identified by NSN 3H-4420-016673937-PP, with technical data package version 005 and reference number D-17503-11PC2, delivered FOB origin. The government does not own or have rights to the technical data necessary to source this part from alternative suppliers, and obtaining such rights or reverse engineering the component is deemed uneconomical. Limited competition is anticipated under FAR Overhaul 6.103-1, with solicitation and negotiation restricted to a narrow pool of qualified sources capable of meeting the specified requirements. While other potential suppliers may submit capability statements to demonstrate their ability to fulfill the requirement, these submissions will not delay award proceedings or automatically qualify them for consideration. The part is not covered under commercial acquisition policies in FAR Overhaul Part 12, indicating it is treated as a unique or non-commercial item. Technical documentation such as military specifications, qualified product lists, and handbooks can be accessed via ASSIST-Quick Search or ordered through DODSSP, though proprietary materials like drawings, patterns, and deviation lists are not available through these channels. All inquiries and document requests should be directed to the DODSSP ASSIST Service Desk. The solicitation was posted on August 7, 2026, with responses due by September 21, 2026, and is managed by the Naval Supply Systems Command Weapon Systems Support Mechanical in Mechanicsburg, Pennsylvania, with Tyler Curfman listed as the primary point of contact.

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 811210
New
Federal
59--CIRCUIT CARD ASSEMB, IN REPAIR/MODIFICATION OF
Solicitation # N0010426QYAEB
The contract pertains to the sole-source repair of a circuit card assembly identified by NSN 7H-5998-015421688-VN and part number S9515-AL-MMA-010, used in the Sub Atmosphere Control system under weapon system NV823323-1. This repair work is authorized solely for Hamilton Sunstrand Corp. (CAGE 73030), the original equipment manufacturer and the only source capable of providing the repair due to proprietary data and design rights held exclusively by the manufacturer, with no government ownership of the associated technical data. The procurement is conducted under FAR 6.302 and 10 U.S.C. 2304(c)(1), allowing noncompetitive negotiation based on the absence of alternative sources, and requires all non-approved vendors to submit a Source Approval Request prior to consideration, though the timeline will not be extended for such requests. The National Industrial Security Program and Buy American provisions apply, and UID marking is mandatory for delivered items. The contract is set for a one-year duration with an anticipated award date of 8 October 2026 following a solicitation posting on NECO on 21 August 2026, with responses due by 22 September 2026. Electronic submission is required, with no hard copy or telephone inquiries accepted. Despite appearing as a Small Business Set-Aside in metadata, the procurement is explicitly non-competitive and not designated for total small business set-aside in actual execution. Interested parties may submit capability statements by email to the point of contact, Taylor Weidman, within 45 days of the notice publication for consideration, though no competitive selection is anticipated.
Electronic and Precision Equipment Repair and Maintenance

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 334412
New
Federal
59--ELECTRONIC COMPONEN, IN REPAIR/MODIFICATION OF
Solicitation # N0010426QYABY
The U.S. Navy’s Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, intends to award a sole-source contract to WARD LEONARD CT LLC for the repair of two electronic components identified by NSN 7H-5998-013160668-GL and part number 948E332G1, intended for the Sub Engineering Systems. This repair requirement is authorized under 10 U.S.C. 2304(c)(1) and FAR 6.302 due to the exclusive status of the vendor as the Original Equipment Manufacturer, with no other sources capable of performing the repair without access to proprietary data or designs solely held by the contractor. The Government does not own the technical data rights necessary to obtain support from alternate suppliers, making this source the only viable option. Deliverables are to be shipped to W25G1U, W1A8 DLA Distribution in New Cumberland, Pennsylvania, with UID requirements and Buy American Act clauses applicable. The procurement will proceed under FAR Part 15 using negotiated procedures and will not follow commercial item acquisition policies under FAR Part 12. The solicitation, identified as N0010426QYABY, is anticipated to be released on July 31, 2026, with proposals due by August 31, 2026, and an award targeted for September 15, 2026. The contract duration will be one year, and all submissions must be made electronically via the Navy Electronic Commerce Online (NECO) portal; no hard copies or telephone inquiries will be accepted. While the notice initially indicated a Total Small Business Set-Aside, the contract data reflects that this classification is not accurate, and the procurement is not restricted to small businesses. All responsible parties may submit capability statements within 45 days of the synopsis publication for consideration, though no competitive solicitation is planned unless new evidence emerges that contradicts the sole-source justification. Interested vendors must contact Taylor Weidman at taylor.m.weidman2.civ@us.navy.mil to express capability, and all responses will be evaluated solely to determine whether competition is feasible.
Bare Printed Circuit Board Manufacturing

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 333612
New
Federal
2-TON CHAIN HOIST
Solicitation # N0010426QBJ01
The procurement pertains to a 2-ton chain hoist under solicitation N0010426QBJ01, with a closing date of June 18, 2026, and pricing valid for 60 days after that date unless otherwise specified. All contractual documents are deemed issued upon electronic transmission, and submission via email or NECO requires explicit validation of pricing validity duration. The technical scope is governed by the Individual Repair Part Ordering Data (IRPOD), which must be reviewed at the BPMI site—a mandatory requirement. Order of precedence for resolving conflicts among documents prioritizes contract amendments, then the schedule, terms and conditions, IRPOD, STRs, drawings, and specifications, with contractors required to use full revisions of cited documents unless approved otherwise. Compliance with the Qualified Products List QPL-904 is mandatory, and no deviations from technical or delivery requirements are permitted without prior written justification, including technical data supporting alternate items. Mercury or mercury-containing compounds are strictly prohibited from contact with supplied hardware. Packaging must adhere to MIL-PRF-23199 and applicable cleanliness standards referenced in MIL-STD-767, MIL-STD-2041, or IRPOD, with green poly bags permitted only under specific conditions, and fire-retardant materials no longer required. Inspection and acceptance are governed by the IRPOD and DD Form 1423 protocols, including designated inspection codes and data submission requirements tied to Block 7, 10, and 16 provisions. Technical data packages and deliverables must be submitted in accordance with DID DI-MISC-81356, including a Certificate of Compliance with each delivery. All technical documents are marked NOFORN and subject to export control, requiring pre-approval for distribution to foreign nationals. The solicitation is a total small business set-aside, and contractors must submit current small business representations, equal opportunity certifications for veterans and workers with disabilities, and cybersecurity maturity certification compliance. Wide Area Workflow payment instructions and mandatory use of Workflow Pro are specified, and all contractual obligations are subject to government acceptance upon proposal submission, with the contract issued upon electronic confirmation.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 334511
New
Federal
ACCELEROMETER,MECHA
Solicitation # N0010426QNE28
This contract solicits repair services for specific naval components including the TOWED ARRAY SONAR, ADAPTER ASSEMBLY IN, ACCELEROMETER MECHA, CIRCUIT CARD ASSEMBLY, and RECEIVING SET SONAR, each identified by their respective NSNs and reference numbers. All repairs must adhere strictly to military standards such as MIL-STD-129 and MIL-STD-130 for marking and identification, and require full compliance with electrostatic discharge controls for circuit cards. Contractors must be authorized distributors of the original manufacturer and hold an active U.S. security clearance in accordance with DD Form 254 due to the controlled technical data involved. Repairs must eliminate all metallic mercury contamination, and any use of mercury requires prior written government approval with accompanying warning labels. The contract mandates Government-Source Inspection and Acceptance, and all repair records must be retained for 365 days after final delivery. The repair turnaround time is set at 375 days measured from physical receipt of the asset at the contractor's facility as recorded in the Commercial Asset Visibility system. Proposals must include firm-fixed pricing for both repair and Beyond Repair scenarios, along with throughput capacity per month and the original procurement cost of the item. Substitutions or design changes require written government authorization and must be classified under specific code designations. The contract includes an option to increase the order quantity by up to 100% within 468 days of award at the same contracted price. All submissions must be sent exclusively via email to Rachel E. Kern, and the acquisition is conducted under emergency flexibility authorities with induction expiration 120 days after award. Packaging must comply with MIL-STD-2073, and all subcontractors are bound by the same requirements regarding mercury, security, and quality control.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 334412
New
Federal
59--CIRCUIT CARD ASSEMB, IN REPAIR/MODIFICATION OF
Solicitation # N0010426QYABZ
The U.S. government, through NAVSUP Weapon Systems Support in Mechanicsburg, Pennsylvania, plans to award a sole-source contract to L3HARRIS MARITIME SERVICES INC. for the repair of a specific circuit card assembly identified by NIIN 7H-5998-015389217 and part number 10-4725-C1, used in sub propulsion systems. This item is critical to military operations, and the government has determined that L3HARRIS is the original equipment manufacturer and the only viable source capable of performing the repair, with no available technical data or rights held by the government to permit procurement from alternate suppliers. The contract will cover seven units to be delivered to DLA distribution centers in New Cumberland, Pennsylvania, and Tracy, California. The procurement is authorized under 10 U.S.C. 2304(c)(1) and FAR 6.302, and no competitive bidding is anticipated unless another qualified source submits a valid Source Approval Request, which will not delay the process. The contract is set for a one-year duration with UID requirements and Buy American Clause compliance, and will be executed under FAR Part 15 procedures, excluding commercial item acquisition policies. The solicitation, numbered N0010426QYABZ, is anticipated to be released on August 5, 2026, with responses due by September 3, 2026, and an award expected by September 18, 2026. All submissions must be made electronically via NECO, with no hard copies or phone inquiries accepted. Although the notice initially indicates a Total Small Business Set-Aside, the contract terms clarify it is not a Small Business Set-Aside. Interested parties may submit capability statements to Taylor Weidman by email within 45 days of the notice’s publication to be considered, although the government has affirmed its intent to proceed solely with the identified contractor.
Bare Printed Circuit Board Manufacturing

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
VALVE,DE ICING
Solicitation # N0010426QJC09
This contract pertains to the repair of the VALVE, DE ICING under solicitation N0010426QJC09, with a required Repair Turnaround Time (RTAT) of 107 days measured from physical receipt of the asset at the contractor’s facility as recorded in the Commercial Asset Visibility system. The contract mandates strict adherence to technical specifications, including compliance with MIL-STD-130 Rev N for marking and the use of approved repair standards, drawings, and technical orders referenced by CAGE code 1N8S8 and part numbers 0-300-257-01 and 0-001-110-01-FIND NO 3. All repairs must meet or exceed original manufacturer requirements, and no design, material, or part number substitutions are permitted without prior written approval from the NAVICP-MECH Contracting Officer, categorized under specific Code designations. The contracting vehicle is a firm-fixed-price arrangement with FOB Origin freight terms, and the Government retains the right to conduct inspections and enforce quality control through its own means if necessary. Records of all inspections and testing must be maintained for 365 days post-final delivery. The contract includes a mandatory Option for Increased Quantity allowing the Government to extend the order for up to 365 days post-award at the originally quoted unit price. Failure to meet the RTAT results in a predetermined price reduction per unit per month, with a specified maximum cap, though excusable delays such as Government-caused delays are exempt. A Repair Turnaround Time compliance statement must accompany each quote, along with any capacity constraints if the contractor cannot meet the 107-day requirement. Pricing must be supported by historical data or comparable commercial invoices, and contractors must compare their repair price to the cost of purchasing a new unit. The Government requires Government Source Inspection and adherence to Buy American and other trade agreement certifications. Only authorized distributors of the original manufacturer may submit bids, with proof of authorization required on company letterhead signed by an official. All documents provided by the Navy include distribution statements limiting access per OPNAVINST 5510.1, and compliance with security prohibitions, workforce reporting via WFP Mod Assist, and the mandatory use of Wide Area Workflow payment instructions are contractually required. Any asset deemed beyond repair incurs a negotiated T&E fee not to exceed a specified amount. The award will be issued bilaterally, requiring contractor acceptance before execution.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 334412
New
Federal
METER,SPECIAL SCALE
Solicitation # N0010426QYADT
This contract pertains to the procurement of a METER,SPECIAL SCALE under solicitation N0010426QYADT, with a response deadline of August 12, 2026, and is issued under Emergency Acquisition Flexibilities. The award will be bilateral, requiring the contractor’s written acceptance before execution, and all contractual documents are deemed issued upon electronic transmission or mailing. The item must comply with Cage Code 0BHF9 and reference number 9230-04-0013, and must be marked per MIL-STD-130 Rev N. Any design, material, or part number changes require prior written approval from the NAVICP-MECH Contracting Officer, categorized by specific codes indicating the nature of the change. The product must be mercury-free and free from mercury contamination, with strict prohibitions against mercury use unless approved in writing with detailed safety and containment plans; contamination testing protocols are specified, and violations are grounds for rejection. Subcontractors are bound by the same mercury requirements, and contractor inspection records must be maintained for 365 days after final delivery. The contractor is responsible for all quality assurance and inspection activities, subject to Government oversight, and compliance with all contract terms is mandatory even where inspections are not explicitly detailed. Packaging must adhere to MIL-STD-2073 as specified in the schedule. Only authorized distributors of the original equipment manufacturer may bid, requiring formal authorization on company letterhead. The contract includes a one-year warranty from delivery date and an option for an additional quantity to be exercised within 365 days of award under identical pricing and delivery terms. It incorporates mandatory use of Workflow Pro, Navy-specific payment instructions via Wide Area Workflow, and applies DEFENSE PRIORITIES AND ALLOCATIONS SYSTEM (DPAS) priority ratings. Security prohibitions, annual certifications, and restrictions on distribution of technical data under seven defined codes are enforced; NOFORN and Official Use Only documents require certifications. The item is intended for naval use, with heightened safeguards due to risks of mercury contamination in submarines and surface ships, and all applicable standards and referenced documents must be obtained through official DOD channels.
Bare Printed Circuit Board Manufacturing

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 325920
New
Federal
1356-01-533-5206; TH04; IGNITER, TORPEDO, ASSEMBLY
Solicitation # N0010426RK077
The solicitation N0010426RK077 seeks a firm fixed-price contract for the procurement of the IGNITER, TORPEDO, ASSEMBLY, identified by NSN 4T-1356-01-533-5206 and DODIC TH04, under NAICS code 325920 for explosives manufacturing. This is a competitive, unrestricted acquisition with no set-aside, requiring full compliance with stringent safety, quality, and cybersecurity standards due to the item’s classification as a Critical Safety Item and explosive material with a hazard classification of 1.4 and UN number 0325. The contractor must adhere to all applicable military standards including MIL-STD-129, MIL-STD-130, MIL-STD-1168, and 49 CFR for packaging, marking, transportation, and hazardous materials handling. A Safety Survey is mandatory, and compliance with DoD Manual 4145.26 is required, along with government access to facilities and safety documentation. The contract includes specific first article testing for 33 units, production lot testing for 80 units, and delivery of 20 production units per line item, with additional quantities under an option for 300 more units. Delivery timelines vary by line item, ranging from 60 days after award to 202 days after first article approval, with multiple destinations including key U.S. naval facilities and an Australian government cargo office. The item requires UID compliance, serial number registration, and full adherence to drawings and specifications verified by DCMA. Proposals must be submitted electronically in Word, Excel, or PDF format, with each volume—Introductory, Past Performance, Small Business Participation, and Price—filed separately and not exceeding 10MB per attachment. Proposals must address all evaluation factors, with past performance being significantly more important than small business participation, and both collectively deemed significantly more important than price. Offerors must achieve at least a “limited confidence” rating in past performance to be eligible for award, and the contract will be awarded based on best value using a trade-off analysis. Compliance with CMMC cybersecurity requirements is mandatory, and contractors must maintain current CMMC status and affirm continuous compliance in SPRS. All offerors must be active in SAM, submit accurate small business size status representations, and include required certifications and representations per FAR clauses, including deviations such as a 10 percent
Explosives Manufacturing

POSTED

1 day ago

DEADLINE

in 27 days
View Details