5999--554 (C) ELECTRIC MOTOR AND INSTALLATION Small Business Set Aside

Request for Quote (RFQ) #: 36C25922Q0505 554 ELECTRIC MOTOR AND INSTALLATION This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. The Government reserves the right to make no award from this solicitation. * The deadline for all questions is 4:00pm EST, July 18, 2022 All questions must be submitted in writing no later than the question cut-off date marked above. All questions will be answered officially through an amendment to the solicitation. ** Quotes are to be provided to contact@example.gov no later than 4:00pm ET, July 20, 2022 Quotes shall not be hand carried. Faxed quotes shall not be accepted. Emailed quotes are the only method of submitted quotes (4MB email limit). The Government reserves the right to make award solely on initial Quotes received. Offerors bear the burden of ensuring that all portions of the offer (and any authorized amendments) reach the designated office before the deadline specified in the solicitation. This RFQ shall be completed in its entirety, and signed and dated, failure shall not be considered for award. This is a Request for Quote (RFQ) and the solicitation number is 36C25922Q0505. The government anticipates awarding a firm-fixed price contract resulting from this solicitation. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2022-06 effective May 01, 2022.. The North American Industrial Classification System (NAICS) code for this procurement is 334419 with a small business size standard of 750 employees. This solicitation is a 100% set-aside for small businesses. List of Line Items; Line Item Description Quantity Unit of Measure Unit Price Total Price 0001 Marathon Motor GT1054A Electric Motor 1 EA $ $ 0002 Labor for removal and install 1 EA Grand Total $ Description of Requirements for the items to be acquired OBJECTIVE: The objective of this contract is to remove the existing motor and install a new motor for the trash system at Rocky Mountain Regional Veterans Affairs Medical Center, 1700 Wheeling St., Aurora, Colorado. STATEMENT OF WORK: All work and services must be executed in accordance with National Fire Protection Association Standards for Healthcare Facilities, Veteran s Administration (VA) protocol, standards, as well as manufacturer recommendations. This entire project must conform 100% to all OSHA standards, and applicable building codes, as well as VA standards. The buildings are and will continue in use. The work can be done after daily working hours to prevent disruption of VAMC operations. All activities shall be coordinated with the Facility Management Service (FMS), which shall ensure access to all areas of work. Work includes, but is not limited to, providing all materials and labor necessary to perform the work. The vendor shall supply all safety and PPE equipment and supplies. Vendor to provide a 1-year warranty for parts and service from the date of install. RESOURCES The Government will not furnish any resources for the fulfillment of the services required under this contract. The contractor must provide all tools, equipment, materials, transportation, professional expertise, personnel, and supervision for all services required under this contract. The contractor must demonstrate satisfactory operation of the devices to the COR for approval. CODE & REGULATION COMPLIANCE The Contractor shall comply with the public laws and statutes including all changes and amendments of federal, state and local environmental statutes and regulations in effect of date of issuance of this contract, including, the applicable portions of the documents cited in the basic contract and below. NFPA 99: Health Care Facilities Code NFPA 70: National Electrical Code NFPA 70E: Personnel Protection 29 CFR 1910 Occupational Safety & Health Standards NFPA 101: Life Safety PRODUCTS REQUIRED: Marathon GT1054A (model# 447TSTFCD6004) electric motor or equal 200 HP 3600RPM 447TS frame totally enclosed fan cooled 3 Phase, 460V, 60Hz Reversible rotation Insulation Class F Insulated Ball Bearing Shaft Size: 2.38 diameter x 4.75 L Dimensions 51.46 L x 30.75 W x 28.24 H Horizontal motor orientation CSA Certified EISA Compliant NEMA Premium & Reg UL Listed All accessories shall be provided and shall include wiring, connections and supplies necessary to install the equipment above to be fully functional and operational. INSTALLATION: Motor shall be replaced in kind and laser aligned. All Parts and Labor to install. CS-241 All required labor, conduit, wire, etc. to provide a complete system is included. QUALITY CONTROL: Contractor shall provide proof of insurance that covers the work to be done in Confined Space per OSHA requirements All involved installers shall have a minimum of 10-hour OSHA training, and the Competent Person required to be on site at all times shall have 30-hour OSHA training. Contractor shall arrange for and cover the cost of all Permits and inspections required by the State of Colorado EPA. WARRANTY: All materials and labor shall be warranted for one year from acceptance of work. HOURS OF WORK: All work can be done during business hours. Any after hours work will need to go through POC. Federal Holidays and any other day declared a federal holiday by the President of the United States are defined below. New Year s Day Martin Luther King Jr s Day Presidents Day Memorial Day Independence Day Labor Day Columbus Day Veterans Day Thanksgiving Day Christmas Day If a holiday falls on Sunday, the following Monday will be observed as the National Holiday. When a holiday falls on a Saturday, the preceding Friday is observed as a National Holiday by the U.S. Government. BADGES AND PARKING: If a given contractor s personnel will be working on-site for less than 5 working days, access to the facility can be attained by contacting the police and obtaining temporary access badges. If a contractor will be working on site more than 5 working days, identification badges must be procured by contacting the COR or POC. All Contractor personnel are required comply with VAAR 852.273-74 (Available online at VA Technical Information Library) which covers the following requirements: background checks, and the wearing of identification (I. D.) badges issued by the VA ECHCS. While on VA Facilities grounds, temporary or official I.D. badges shall be worn continuously. Failure of the background check may result in specific personnel being disallowed to work on VA premises and the Contractor will need to provide replacement personnel. It is the responsibility of the Contractor s personnel to park in the appropriate designated parking areas. The designated parking area will be specified by COR upon award of contract. PERSONNEL ASSIGNMENT: The Contractor shall assign the appropriate quantity and type of personnel to successfully complete all functions specified in this SOW. The Contractor shall maintain throughout the life of this contract, a current list of technicians and their credentials available for inspection by the Government at any time. MEETINGS A Pre-Bid meeting and site walk will be held at a date and time specified by the COR to review scope, site, and requirements with perspective contractors, and provide answers to any questions. Veteran s Administration personnel will walk the work area with contractor to identify the conditions. PERIOD OF PERFORMANCE Period of performance: Work shall begin within 5 days of Notice to Proceed and shall be complete within 120 calendar days of Notice to Proceed. Delivery and acceptance is to be F.O.B Destination (FAR 52.247-34) at the Veterans Affairs Medical Center, located at Department of Veteran Affairs Eastern Colorado Health Care System 1700 N. Wheeling St Aurora, CO 80045 52.212-1, Instructions to Offerors--Commercial Items applies to this acquisition ADDENDUM to FAR 52.212-1 INSTRUCTIONS TO OFFERORS COMMERCIAL Gray market items are Original Equipment Manufacturer s (OEM) goods sold through unauthorized channels in direct competition with authorized distributors. This procurement is for new OEM medical supplies, medical equipment and/or services contracts for maintenance of medical equipment (i.e. replacement parts) for VA Medical Centers. No remanufactures or gray market items will be acceptable. Offeror shall be an OEM, authorized dealer, authorized distributor or authorized reseller for the proposed medical supplies, medical equipment and/or services contracts for maintenance of medical equipment (i.e. replacement parts), verified by an authorization letter or other documents from the OEM, such that the OEM s warranty and service are provided and maintained by the OEM. All software licensing, warranty and service associated with the medical supplies, medical equipment and/or services contracts for maintenance of medical equipment shall be in accordance with the OEM terms and conditions. The delivery of gray market items to the VA in the fulfillment of an order/award constitutes a breach of contract. Accordingly, the VA reserves the right enforce any of its contractual remedies. This includes termination of the contract or, solely at the VA s election, allowing the Vendor to replace, at no cost to the Government, any remanufactured or gray market item(s) delivered to a VA medical facility upon discovery of such items. Offerors providing an or equal product(s) must adhere to the terms in FAR 52.211-6. If an item in this solicitation is identified as brand name or equal, the purchase description reflects the characteristics and level of quality that will satisfy the Government s needs. The salient physical, functional, or performance characteristics that equal products must meet or exceed are specified in the solicitation. To be considered for award, offers of equal products, including equal products of the brand name manufacturer, must Meet the salient physical, functional, or performance characteristic specified in this solicitation; Clearly identify the item by- Brand name, if any and Make or model number, Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and Clearly describe any modification the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modification. The contracting officer will evaluate equal products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the contracting officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer. Unless the offeror clearly indicates in its offer that the product being offered is an equal product, the offeror shall provide the brand name product referenced in the solicitation Any award made as a result of this solicitation will be made on an All or Nothing Basis. State if quoted items are available and priced through offerors existing Government-wide Acquisition Contract (GWAC), GSA Multiple Award Schedule (MAS) contract, or VA-wide Acquisition Contract. If the acquisition is set-aside for SDVOSBs/VOSBs, their socioeconomic status must be VIP verified and visible in the VA Vendor Information Pages (VIP): https://www.vip.vetbiz.gov/ at the time of quote submission AND award, or will be considered non-responsive, and will NOT be considered for award. Offerors are warned against contacting any VA personnel other than the Contracting Officer and Contract Specialist prior to placement of any award made resulting from this RFQ. If such contact occurs and found to be prejudicial to competing contactors, the offeror making such contact may be excluded from award considerations. All proprietary information shall be clearly and properly marked. If the Offeror submits annexes, documentation, attachments or the like, not specifically required by this solicitation, such will count against the Offeror s page limitations unless otherwise indicated in the specific volume instructions below. All information shall be confined to the appropriate file. The offeror shall confine submissions to essential matters, sufficient to define the quote and provide an adequate basis for evaluation. Offerors are responsible for including sufficient details, in a concise manner, to permit a complete and accurate evaluation of each quote. Submission of quote shall include the following volumes: (I) Technical capability or quality of the item offered to meet the Government requirement, (II) Price; and (III) Authorized Distributor Letter Volume I - Technical capability or quality of the item offered to meet the Government requirement The offeror shall submit specifications, cut sheets, or brochures confirming the products, including of the brand name manufacturer submitted, meets or exceeds the salient physical, functional, or performance characteristic specified in this solicitation. The product(s) quoted must be identified by brand name, if any, and make or model number. Volume II Price Price - The offeror shall complete the pricing schedule provided in Section (v) above: Price/Cost Schedule. Volume III Authorized Distributor Letter The offeror shall submit a letter form the OEM manufacturer stating they are authorized to sell the items identified in this RFQ. (End of Addendum to 52.212-1) 52.212-2, Evaluation--Commercial Items applies to this acquisition ADDENDUM to FAR 52.212-2 EVALUATION COMMERCIAL ITEMS: The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government considering price and other factors. The following factors shall be used to evaluate quotations: Factor 1. Technical capability or quality of the item offered to meet the Government requirement Factor 2. Price Factor 3. Letter of Authorized Distributor Evaluation Approach. The Government will evaluate quotations using the comparative evaluation process outlined in FAR 13.106-2(b)(3), where quotations will be compared to one another to determine which provides the best benefit to the Government. The Government reserves the right to consider a quotation other than the lowest price that provides additional benefit(s). Quotations may exceed minimum requirements of the solicitation. The Government reserves the right to select a quotation that provides benefit to the Government that exceeds the minimum requirements of the solicitation, but is not required to do so. Each response must meet the minimum requirements of the solicitation. The Government is not requesting or accepting alternate quotations. The evaluation will consider the following: Factor 1. Technical capability or quality of the item offered to meet the Government requirement: The quotation will be evaluated to the extent to which it can meet and/or exceed the Government s requirements as outlined in the solicitation and based on the information requested in the instructions to quoters section of the solicitation. Factor 2. Price: The Government will evaluate the price by adding the total of all line item prices. The Government may use various price analysis techniques and procedures to make a price reasonableness determination. Offers that do not meet or exceed the technical capability or quality of the item offered to the Government requirement, as stated in Factor 1, shall not be selected regardless of price. Factor 3. Letter of Authorized Distributor: The offeror shall submit a letter form the OEM manufacturer stating they are authorized to sell the items identified in this RFQ. (End of Addendum to 52.212-2) 52.212-3, Offeror Representations and Certifications Commercial Items, applies to this acquisition. Offerors must complete annual representations and certifications electronically via the System for Award Management (SAM) website located at https://www.sam.gov/portal in accordance with FAR 52.212-3, Offerors Representations and Certifications Commercial Items. If paragraph (j) of the provision is applicable, a written submission is required. Offerors must be registered in SAM at time of offer submission. 52.212-4, Contract Terms and Conditions--Commercial Items applies to this acquisition 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders--Commercial Items (JUL 2020) applies to this acquisition FAR 52.212-5 applies to this acquisition with the following FAR clauses incorporated by reference; FAR 52.209-6 Protecting the Government s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (JUN 2020) (31 U.S.C. 6101 note) FAR 52.219-6 Notice of Total Small Business Set-Aside (NOV 2020) (15 U.S.C. 644) FAR 52.219-8 Utilization of Small Business Concerns (Oct 2018) (15 U.S.C. 637(d)(2) and (3)) FAR 52.219-28 Post Award Small Business Program Representation (NOV 2020) (15 U.S.C 632(a)(2)) FAR 52.219-33 Nonmanufacturer Rule (MAR 2020) FAR 52.222-3 Convict Labor (JUN 2003) (E.O. 11755) FAR 52.222-19 Child Labor Cooperation with Authorities and Remedies (JUL 2020) (E.O. 13126) FAR 52.222-21 Prohibition of Segregated Facilities (APR 2015) FAR 52.222-26 Equal Opportunity (SEP 2016) (E.O. 11246) FAR 52.222-35 Equal Opportunity for Veterans (JUN 2020) (38 U.S.C. 4212) FAR 52.222-36 Equal Opportunity for Workers with Disabilities (JUN 2020) (29 U.S.C. 793) FAR 52.222-37 Employment Reports on Veterans (JUN 2020) (38 U.S.C. 4212) FAR 52.222-40 Notification of Employee Rights Under the National Labor Relations Act (DEC 2010) (E.O. 13496) FAR 52.222-50 Combating Trafficking in Persons (OCT 2020) (22 U.S.C. chapter 78 and E.O. 13627) FAR 52.223-18 Encouraging Contractor Policies to Ban Text Messaging While Driving (JUN 2020) (E.O. 13513) FAR 52.225-1 Buy American Supplies (JAN 2021) (41 U.S.C. chapter 83) FAR 52.225-13 Restrictions on Certain Foreign Purchases (JUN 2008) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury) FAR 52.232-33 Payment by Electronic Funds Transfer System for Award Management (Oct 2018) (31 U.S.C. 3332) Additional contract requirements or terms and conditions: 852.212-70, Provisions and Clauses Applicable to VA Acquisition of Commercial Items (Apr 2020) VAAR 852.203-70 Commercial Advertising (MAY 2018) VAAR 852.232-72 Electronic Submission of Payment Requests (NOV 2018) VAAR 852.233-70 Protest Content/Alternative Dispute Resolution (OCT 2018) VAAR 852.233-71 Alternate Protest Procedure (OCT 2018) VAAR 852.246-71 Rejected Goods (OCT 2018) 852.252-70, Solicitation Provisions or Clauses Incorporated by Reference (Jan 2008) The following provisions or clauses incorporated by reference in this solicitation must be completed by the offeror or prospective contractor and submitted with the quotation or offer. Copies of these provisions or clauses are available on the Internet at the web sites provided in the provision at FAR 52.252-1, Solicitation Provisions Incorporated by Reference, or the clause at FAR 52.252-2, Clauses Incorporated by Reference. Copies may also be obtained from the contracting officer. http://www.acquisition.gov/far/index.html https://www.acquisition.gov/vaar The following FAR provisions are to be incorporated by reference: FAR 52.204-7 System for Award Management (OCT 2018) FAR 52.204-16 Commercial and Government Entity Code Reporting (AUG 2020) FAR 52.211-6 Brand Name or Equal (AUG 1999) FAR 52.214-21 Descriptive Literature (APR 2002) FAR 52.229-11 Tax on Certain Foreign Procurements Notice and Representation (JUN 2020) The following VAAR provisions are to be incorporated by reference: None The following FAR clauses are incorporated by reference: FAR 52.203-17 Contractor Employee Whistleblower Rights and Requirement to Inform Employees of Whistleblower Rights (JUN 2020) FAR 52.204-13 System for Award Management Maintenance (OCT 2018) FAR 52.204-18 Commercial and Government Entity Code Maintenance (AUG 2020) FAR 52.232-40 Providing Accelerated Payments to Small Business Subcontractors (DEC 2013) The following VAAR clauses are to be incorporated by reference: VAAR 852.212-71 Gray Market Items (APR 2020) VAAR 852.212-72 Gray Market and Counterfeit Items (MAR 2020) (DEVIATION) VAAR 852.219-74 Limitations on Subcontracting Monitoring and Compliance (JUL 2018) (Deviation) The Defense Priorities and Allocations System (DPAS) does not apply. Date and Time offers are due to contact@example.gov by 4:00pm ET, 07/20/2022. Name and email of the individual to contact for information regarding the solicitation: Natasha Holland contact@example.gov