Top

5G-Tolerant Low Range Radio Altimeters (LRRA) Upgrade

Active

Federal

Response Deadline08/17/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of EnergyView Agency

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument ManufacturingView NAICS

Place of Performance

ROAD FORKS, NM, 87117, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 15

subcontract

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 08:00:00 PM UTCin 22 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyDepartment Of Energy

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Energy

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Replace or upgrade LRRA with 5G-tolerant models to ensure signal integrity in modern spectrum environments.

Similar Contracts

Same NAICS industry code

NAICS: 334511

New

DIBBS

COVER, ELECTRONIC COThis contract pertains to the procurement of one unit of a COVER, ELECTRONIC CO, identified by NSN 5895-01-576-0202 and part number G689188-1, under solicitation SPE7M8-26-T-5605. The item must be delivered within ten days to the designated receiving facility at Fort Irwin, California, with delivery terms FOB origin and zero variance permitted in quantity. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951, while labeling and marking must strictly adhere to MIL-STD-129 as directed by DLA’s Master List of Technical and Quality Requirements, which override any conflicting standards. Palletization follows RP001 DLA Packaging Requirements, and the Unit of Issue is EA with a Quantity per Unit Pack of 001. The shipment must be sent by the fastest traceable means excluding parcel post, and all packaging must include the required marks and references including the military freight designation W51WKX, RDD 555, Project TP 2, and supplier identification C. The Required Delivery Date is July 21, 2026, and the contract is governed by DLA’s official unit of issue guidelines, with technical and quality specifications sourced from the DLA Master List referenced in the solicitation. Only the DLA-authorized point of contact, Dondiego Boler, may be contacted for administrative or procedural inquiries.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

GLOVES, DISPOSABLEThe contract specifies the procurement of disposable nitrile rubber gloves in a Bear Claw Glove Kit configuration, sized large with a sand color, measuring 11.8 inches in length, featuring a beaded cuff, 8 mil thick fingertips, 6 mil thick palm, and 4.7 mil thick cuff. The gloves are designed for single-use only and are individually wrapped in pairs. Each unit of issue is a package containing 25 pairs, with a total quantity of five packages required. The product is identified by NSN 8415-01-600-0262 and must comply with DLA packaging requirements and technical quality standards outlined in the DLA Master List of Technical and Quality Requirements. The item is to be delivered within 20 days of award to Fort Campbell, with the procurement governed under solicitation SPE2DS-26-T-271P, issued on July 26, 2026, and requiring responses by August 3, 2026. The acquiring agency is the Department of Defense through the Medical Supply Chain MD Surg FSF, and all non-accepted supplies must have government identification removed prior to return. The primary point of contact for inquiries is Tiffany Parker, reachable via email and phone.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

INDICATOR, CARBON MONOXThe contract pertains to the procurement of two units of a carbon monoxide indicator, part number BWC2-M25100, with NSN 6665200018480, for delivery to the USS STETHEM DDG 63. Delivery is required within 20 days to the destination FOB, with zero tolerance for quantity variance, and inspection and acceptance occur upon arrival. The item is classified as a critical application product with a TYPE 2 shelf life of 12 months, extendable, and must comply with MIL-STD-2073-1E packaging standards, including labeling per MIL-STD-129. Packaging must meet DLA’s procurement requirements and include specific handling instructions for hazardous materials, as the device contains a lithium battery classified under HCC: ARTICLE, BATTERY, LITHIUM. Shipping must be by the fastest traceable means—parcel post is prohibited—and transportation procedures follow DLAD PROC NOTES C19 and C20. The product is subject to strict hazard communication protocols effective June 1, 2015, mandating submission of Safety Data Sheets and compliant HCS labels aligned with 29 C.F.R. 1910.1200, along with employee training on these requirements. Mercury and mercury-containing compounds are strictly prohibited from direct contact with the item, except for designated functional uses such as sensors or instruments as specified by NAVSEA, and portable fluorescent lamps or instruments containing mercury must feature shock-proof construction and a secondary containment boundary. All packaging, marking, and shipping must adhere to federal standards, and the vendor must conform to the DLA Master List of Technical and Quality Requirements referenced in the contract.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

DRAPE, WOUND CAREThe contract is for the procurement of sterile disposable paper wound care drapes measuring 18 inches by 26 inches, supplied in packages of 300 units each. These drapes are designed to provide a sterile field and feature an inner repellent layer that prevents moisture strike-through, ensuring product integrity during medical use. The item is identified by NSN 6515-01-568-3821 with a single package quantity requested under purchase request 7017611382. Delivery is required within 20 days of award. The solicitation is issued under contract number SPE2DS-26-T-271N with a response deadline of August 3, 2026, and is managed by the Department of Defense’s Medical Supply Chain, specifically the MD Surg FSF office at Scott AFB, Illinois. Bidders must specify the source and part number being supplied and adhere to all technical, quality, and packaging requirements referenced in the DLA Master List of Technical and Quality Requirements, including the removal of government identification from non-accepted supplies. Covered defense information may apply, and all packaging must conform to DLA standards. Primary point of contact is Patrick Esposito, reachable via email and phone provided.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

INDICATOR SUBASSEMBThis contract pertains to the procurement of an Indicator Subassembly with NSN 5895-01-398-5145 and part number 85019000-03, issued under solicitation SPE4A0-26-T-4050 by the Defense Logistics Agency for the Department of Defense. Two line items are specified: one for a single unit priced at $1.00 and another for two units priced at $2.00 each, with both items requiring delivery within five days to designated military addresses in APO AE 09321 and Muwaffaq Salti Air Base, Jordan, under FOB destination terms. The contract enforces strict compliance with DLA’s Master List of Technical and Quality Requirements, which supersedes any conflicting standards such as ASTM D3951, and mandates packaging and labeling in accordance with MIL-STD-129 and MIL-STD-2073-1E, including standardized palletization under RP001. The items must be delivered with no variance in quantity, inspected and accepted at the destination, and marked with no special coding beyond standard requirements. Cybersecurity compliance is required through a CMMC Level 2 Self-Assessment, and the contractor must adhere to all government-specific shipping, logistics, and identification protocols, including parcel post and freight instructions tied to DLAD procedural notes. The original delivery deadline is July 22, 2026, with the solicitation issued on July 26, 2026, and responses due by August 3, 2026, under NAICS code 334511 for navigation and guidance system manufacturing.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

AIRWAY, NASOPHARYNGEThe contract specifies the procurement of 48 packages of nasal pharyngeal airways, each package containing ten individually sealed, sterile, latex-free devices measuring 9.3 mm in diameter and 125 mm in length. The product is designated by NSN 6515-01-560-6983 and must have a minimum shelf life of 24 months, with no more than three months elapsed between the manufacturer’s date and the delivery date to the government. Labeling requirements include the manufacturer date, expiration or retest date, contract number, and lot number, all compliant with the latest revision of MMS1A. The technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must adhere to DLA standards, and non-accepted supplies must have all government identification removed. Bidders are required to clearly state the source and part number of the product being offered. The order is for delivery within 20 days of award to Fort Campbell, with a solicitation issued under SPE2DS-26-T-268V, response deadline set for August 3, 2026, and contact for inquiries is Brooke Webb of the Department of Defense’s Medical Supply Chain.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

MASK, RESPIRATORThis contract specifies the procurement of N95 healthcare particulate respirators, designated as MASK RESPIRATOR, with a unit of issue of one package containing twenty units each. The respirators must be fluid-resistant, sized for small fit, and have a non-extendable shelf life of sixty months, with a clearly marked use-by date in YYYY-MM-DD format on the packaging. No more than nine months may have elapsed between the date of manufacture and the date of delivery to the government. Packaging must comply with commercial standards as outlined in the procurement document, requiring each respirator to be sealed in a protective container and grouped in commercial exterior shipping containers suitable for safe transport at the lowest cost to the specified delivery point. All items must be marked in accordance with Medical Marking Standard No. 1, replacing any prior references to MIL-STD-129, and storage must occur in original packaging away from contamination, dust, sunlight, extreme temperatures, moisture, and harmful chemicals, within a range of -4°F to +86°F and not exceeding 80% relative humidity. The NSN is 6515-01-625-1847, with a single package quantity required, and delivery must be completed within five days after order award. The procurement is governed by the solicitation SPE2DS-26-T-270G, issued by the Department of Defense through the Medical Supply Chain MD Surg FSF, with DLA packaging and technical requirements incorporated by reference, and all applicable standards subject to the version in effect on the solicitation or award date.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

SUTURE, ABSORBABLE, SURGThe contract is for the procurement of absorbable surgical sutures made from plastic glycolide-lactide copolymer, size 4-0, 27 inches in length, with a 3/8 circle taper point, supplied in boxes of 36 each. The item is identified by NSN 6515-01-604-1967 and has a non-extendable shelf life of 60 months, governed by the RS023 shelf-life requirement. All supplies must comply with the technical and quality standards enumerated in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Packaging must adhere to DLA packaging specifications, and any non-accepted supplies must have government identification removed prior to return. Bidders are required to clearly state the source and part number being offered. The solicitation, issued under SPE2DS-26-T-270F, was posted on July 26, 2026, with a response deadline of August 3, 2026. The purchase request is for one box, with a required delivery within five days of award, and performance is to occur in Groton, Connecticut. The contracting activity falls under the Department of Defense, Medical Supply Chain, and all communications should be directed to the primary point of contact, Chandler Alvarez.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

CRUTCHCRUTCH ALUM YOUTH SZ ADJ 4'6"-5'2" is a specially designed youth-adjustable crutch made from double extruded aluminum with a reinforced center tube for enhanced load-bearing strength. The crutch features a patented I-beam center post that limits footpiece rotation to a precise 1.4 turn, ensuring the push-button adjustment remains visible and easily accessible at all times. Stability is improved through durable rivets that secure the aluminum tubing from the inside, eliminating the weaknesses associated with plastic connectors. A long, virtually unbreakable stair deflector enhances safety on stairs by preventing slippage and increasing stress tolerance across all angles without cracking. Non-skid rubber tips provide reliable traction, while a built-in metal ring reduces wear and extends service life. Each unit is fully assembled and packaged with all necessary components, requiring no user assembly. The product is sold as a pair and is identified by NSN 6515-01-577-4676 with a quantity of 10 pairs requested. It is subject to Department of Defense procurement requirements including technical and quality standards outlined in the DLA Master List, packaging specifications, and procedures for removing government identification from non-accepted supplies. The solicitation is issued under contract number SPE2DS-26-T-269E with a response deadline of August 3, 2026, and delivery must be completed within 84 days after order placement to APO 09227-0000.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

SUTURE, ABSORBABLE, SURGThis contract pertains to the procurement of absorbable surgical sutures composed of plastic glycolide-lactide copolymer, size 5-0, 18 inches in length, with a 3/8 circle taper point and 36 sutures per box, designated by NSN 6515-01-604-0118. The item is classified as a TYPE I (CODE S) item with a non-extendable shelf life of 60 months, and must comply with the DLA Master List of Technical and Quality Requirements referenced under RA001, which governs adherence to technical and quality standards applicable at the time of solicitation or award. Packaging must conform to DLA packaging requirements, and all supplies must be free of government identification if not accepted. Bidders are required to clearly state the source and part number being offered. The solicitation, issued under SPE2DS-26-T-270A on July 26, 2026, with a response deadline of August 3, 2026, is for a single box quantity and has a delivery requirement of 20 days after delivery order. The item falls under NAICS code 334511, indicating classification within the surgical and medical instrument manufacturing sector, and is procured by the Department of Defense through the Medical Supply Chain MD Surg FSF. Covered defense information may apply, and the offer must be submitted via the DIBBS portal. The contract is a federal solicitation with no set-aside designation, and the winning supplier must meet all specified performance, packaging, and quality criteria to ensure compatibility with military medical use.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

SUTURE, NONABSORBABLE, SThis contract specifies the procurement of a nonabsorbable surgical suture made from polypropylene, designated as size 4-0, 18 inches long, single-armed, sterile, and colored blue, with a unit of issue of one box containing 12 individual units. The product is a replacement for NSN 6515-01-153-4753 and is intended for use across all medical acquisitions. The suture must comply with the Medical Marking Standard No. 1, superseding MIL-STD-129, and packaging must meet commercial standards to ensure protection from damage and safe delivery via common carrier at the lowest cost to the specified delivery point in Groton, Connecticut. The item has a non-extendable shelf life of 60 months and is classified as a Type I (Code S) item under shelf-life requirement RS001. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Bidders are required to clearly state the source and part number being supplied, and the contracting action is under solicitation SPE2DS-26-T-270M with a response deadline of August 3, 2026. Delivery is due within five days of award, and the procuring organization is the Department of Defense’s Medical Supply Chain.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

VALVE PORT, NEEDLE FREEThe item is a needle-free valve port designed for sterile, neutral displacement use with INVISION PLUS and TOUCH FREE systems, supplied in sterile peel pouches. Each package contains 200 units and is identified by NSN 6515-01-591-5707. The product has a mandatory 60-month shelf life that is non-extendable, and no more than nine months may have passed between the date of manufacture and the date of delivery to the government. Packaging must comply with DLA packaging requirements, and all technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Bidders must clearly state the source and part number being offered. The contract solicitation number is SPE2DS-26-T-268W, issued by the Department of Defense’s Medical Supply ChainMD Surg FSF, with a response deadline of August 3, 2026. Delivery is required within 20 days of award to Fort Bragg, North Carolina, 28310, and the primary point of contact is Dorothy Marquis.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 14 hours ago

DEADLINE

in 7 days

View Details

More opportunities from Department Of Energy

Same awarding agency

NAICS: 541830

Federal

Technical Publications & Flight Manual Development

Media Buying Agencies

POSTED

DEADLINE

Maintenance Checks (C-Check and D-Check)

Other Support Activities for Air Transportation

POSTED

DEADLINE

Aircraft Painting & Specialized Paint Scheme Application

Other Support Activities for Air Transportation

POSTED

DEADLINE

Head-Up Display (HUD 4000) Integration

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Cargo Door & Floor Reinforcement (KF Combi US STC)

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

Forward & Aft Airstairs Installation (STC ST01143LA)

Other Support Activities for Air Transportation

POSTED

DEADLINE

Aircraft Combi Configuration Engineering & STC Certification

POSTED

DEADLINE

Request For Information - OST Acquisition of Boeing 737-800 with COMBI ConfigurationThe Department of Energy is seeking information from qualified parties capable of procuring and converting a used Boeing 737-800 aircraft into a Combi configuration to support national security missions under the Office of Secure Transportation. The selected aircraft must be capable of meeting operational standards outlined in 41 C.F.R. Part 102-33 for public operations in the National Airspace and must be eligible to operate under a Letter of Deviation Authority issued by the Federal Aviation Administration under 14 C.F.R. Part 125, consistent with the existing fleet of 737-400 and 737-700 aircraft. The acquisition is part of a structured process to enhance operational capacity and mission flexibility through a specialized airframe modification that permits the carriage of both cargo and personnel in a single configuration. This Request for Information, designated by solicitation number NAPAS315OSTBoeing and posted on July 15, 2026, is open for responses until August 17, 2026. The NAICS code 336411 identifies the procurement within the Aircraft Manufacturing industry. The opportunity carries no set-aside designation and is open to all eligible vendors. Primary and secondary points of contact are listed with email addresses and phone numbers, both affiliated with the National Nuclear Security Administration. Performance of the required work is anticipated to occur in Road Forks, New Mexico, 87117, while the agency office managing the solicitation is located in Richland, Washington. Interested parties may access additional details through the provided SAM.gov portal link.

Aircraft Manufacturing

POSTED

DEADLINE

Quality Assurance and Reliability Testing for MicroelectronicsThe contract involves the execution of environmental stress screening, burn-in, life cycle testing, and failure analysis for microelectronics to ensure compliance with the National Nuclear Security Administration’s stringent reliability and quality requirements. These activities are essential for validating the long-term performance and resilience of critical electronic components under extreme operational conditions, supporting missions tied to national security and defense systems. All testing must adhere to established protocols to identify potential failure modes and ensure components meet or exceed the specified durability and functional thresholds throughout their intended service life. The work is to be performed at a designated location in Road Forks, New Mexico, with a response deadline of August 13, 2026, and a NAICS code of 541380, indicating specialized scientific and technical consulting services. This is a subcontract opportunity under the Department of Energy, with no set-aside designation specified, making it open to eligible vendors regardless of business size or ownership status. Interested parties must submit proposals by the stated deadline to be considered for participation in supporting mission-critical microelectronics reliability programs for the NNSA.

Testing Laboratories and Services

POSTED

DEADLINE

Microelectronics Supply Chain and Materials Traceability ManagementThe contract titled Microelectronics Supply Chain and Materials Traceability Management mandates the implementation of robust supply chain risk management protocols to safeguard critical microelectronic materials and components against counterfeiting, tampering, and noncompliance. It requires full pedigree documentation across all tiers of the supply chain, ensuring end-to-end traceability from raw material sourcing to final assembly, with strict adherence to authenticity and regulatory standards. Supplier qualification processes must be stringent, encompassing rigorous vetting, audit readiness, and continuous monitoring to maintain the integrity of components used in sensitive applications. Performance is required at ROAD FORKS, New Mexico, 87117, and the work falls under NAICS code 541611, indicating a focus on scientific research and development services related to engineering and technical support. The contract is structured as a subcontract and was posted on July 12, 2026, with a firm response deadline of August 13, 2026, at 8:00 PM. The Department of Energy is the contracting organization, underscoring the national security and technological significance of the materials involved. Compliance with traceability requirements is non-negotiable, and failure to deliver authenticated, fully documented components will result in contract nonperformance.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Silicon Photonics and Quantum Device ManufacturingThe contract involves the development and fabrication of silicon photonics components and quantum devices, specifically micro-fabricated ion traps, for high-performance computing and sensing applications tied to national security. The work requires advanced microfabrication capabilities and expertise in integrating photonic and quantum technologies to meet stringent performance and reliability standards for defense and intelligence use cases. The project is scoped as a subcontract under the Department of Energy and is set to be performed at a facility in ROAD FORKS, with a zip code of 87117. The solicitation was posted on July 12, 2026, and responses must be submitted by August 13, 2026, at 8:00 PM. The NAICS code 334511 indicates the primary focus is on semiconductor and related electronic component manufacturing, aligning with the technical nature of the work. While no set-aside provisions are specified, the contract is positioned for qualified subcontractors with demonstrated experience in quantum device fabrication and silicon photonics. The absence of a designated point of contact suggests inquiries should be directed through official SAM.gov channels linked to the opportunity.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Micro-Electromechanical Systems (MEMS) Development and ProductionThe contract involves the research, design, and production of micro-electromechanical systems (MEMS) including inertial sensors and micro-actuators specifically engineered for integration into nuclear weapon systems, with performance criteria tailored to stringent defense-grade standards. The work requires advanced expertise in MEMS technology to meet exacting reliability, precision, and environmental tolerance requirements mandated by national security applications. All deliverables must align with classified specifications and undergo rigorous validation to ensure operational readiness under extreme conditions. Performance of the contract is designated to take place in Road Forks, New Mexico, with a response deadline of August 13, 2026, and a posting date of July 12, 2026. It is structured as a subcontract under the U.S. Department of Energy, classified under NAICS code 334516 for navigational, measuring, electromedical, and control instrument manufacturing. The project demands compliance with federal security protocols and access to controlled technical data, and participation is restricted to entities capable of supporting classified defense programs with proven experience in high-reliability microsystems engineering for critical national defense infrastructure.

Analytical Laboratory Instrument Manufacturing

POSTED

15 days ago

DEADLINE

in 18 days

View Details