Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

65--FIRST AID KIT,UTILITY

Awarded

SPE2DS26Q0148Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract award is for a First Aid Kit, Utility under solicitation number SPE2DS26Q0148, issued by the Defense Logistics Agency Troop Support, an office within the Department of Defense. The procurement is classified under NAICS code 325412, indicating it pertains to the manufacturing of other pharmaceutical and medicinal products. The notice was posted on July 24, 2026, and the award is managed out of the agency’s office located in Philadelphia, Pennsylvania, with a zip code of 19111. There is no specified set-aside designation, meaning the opportunity is open to all eligible contractors without restrictions based on size or socioeconomic status. The place of performance has not been designated with specific location details. Primary point of contact for the contract is Seth Tootell, reachable via email at Seth.Tootell@dla.mil or by phone at 445-737-6321. The contract details are accessible through the SAM.gov workspace link for further information.

General Info

First Aid Kit, Utility awarded under DLA solicitation SPE2DS26Q0148, open to all contractors, contact Seth Tootell.

Agency

Department Of Defense → DLA Troop SupportView Agency

Contract Value

$25,125

NAICS

325412 - Pharmaceutical Preparation ManufacturingView NAICS

Place of Performance

PA

Set-Aside

NONE

Awardee

ALTITUDE TECHNOLOGIES INC.View Profile

Award Issued Date

07/24/2026, 12:00:00 AM UTC

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseAwarded

PostedJul 24

Award Notice

AwardedJul 24

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Troop Support

Contacts1 person available

OfficePHILADELPHIA, PA, 19111, USA

Organization / Agency

Department Of Defense → DLA Troop Support

View Agency Profile

Office AddressPHILADELPHIA, PA, 19111, USA

Contacts

Seth Tootell

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

https://api.sam.gov/prod/opportunities/v1/noticedesc?noticeid=ef6ad2ee13e141298844a4a728807a41

Similar Contracts

Same NAICS industry code

SODIUM CHLORIDE INJECTSodium Chloride Injection 0.9% in 250 mL units, packaged 24 bags per purchase group, is being procured under solicitation SPE2DP-26-T-4271 with a delivery requirement of five days FOB destination. The item is regulated by the FDA and must comply with strict packaging and marking standards as defined by Medical Marking Standard No. 1, superseding all references to MIL-STD-129. Each unit must be sealed in commercial-grade containers that protect against damage and breakage, and all exterior shipping containers must ensure safe, cost-effective delivery by common carriers. The product has a non-extendable shelf life of 24 months and must be stored at room temperature with brief exposure to up to 40°C permitted without adverse effect. The item is identified by NSN 6505-01-331-8945 and is subject to zero variance in quantity, with inspection and acceptance occurring at the destination. Multiple manufacturers including B. Braun Medical Inc., ICU Medical Inc., Trillamed LLC, and Cardinal Health 200, LLC are qualified suppliers, each identified by specific NDC numbers and part numbers. All packaging and labeling must conform to the latest Medical Marking Standard No. 1, available through DLA Troop Support, and the solicitation includes requirements for covered defense information. The contracting officer must submit a referral in EBS for product confirmation prior to award, including bidder and manufacturer details.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 19 hours ago

DEADLINE

ACEPROMAZINE MALEATE IAcepromazine Maleate Injection, Veterinary, is a 10 mg/mL sterile solution in 50 mL vials intended for intramuscular, intravenous, or subcutaneous administration in cats, dogs, and horses, with strict prohibition against use in horses intended for human consumption. The product is supplied in vials as the unit of issue and must be stored at controlled room temperature between 20–25°C (68–77°F). Packaging must comply with the latest Military Medical Marking Standard No. 1B dated 30 March 2017, along with all DLA packaging and technical requirements referenced in the DLA Master List of Technical and Quality Requirements. This item is classified as a Type I (Code Q) shelf-life item with a non-extendable shelf life of 36 months. Suppliers are required to provide Safety Data Sheets (SDS) and Hazard Communication Standard labels in full compliance with OSHA’s 29 C.F.R. 1910.1200, effective June 1, 2015, and must ensure employee training on these requirements. The product is subject to federal acquisition regulations, including the removal of government identification from non-accepted supplies and potential handling of covered defense information. The NSN is 6509011947255, with a purchase quantity of two 50 mL vials under solicitation SPE2DP-26-T-4274, to be delivered FOB destination within 62 days with zero tolerance for quantity variance. Delivery is to APO 09227-0000, and inspection and acceptance occur upon arrival. The manufacturer is Boehringer Ingelheim Animal Health USA, with applicable NDC and part numbers listed, and the contract is managed by the Department of Defense's Medical Supply Chain PHarma FSA.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 19 hours ago

DEADLINE

POVIDONE-IODINE TOPICAPOVIDONE-IODINE TOPICAL SOLUTION, USP, is a regulated pharmaceutical product procured under contract SPE2DP-26-T-4280 for U.S. military use, with each unit being a 4 fluid ounce (118 mL) bottle identified by the unit of issue BT and NSN 6505010672812. The product must comply with stringent technical and quality requirements from the DLA Master List, including a mandatory 36-month shelf life, of which at least 31 months must remain at time of delivery to the first government activity. Labeling must conform to MED.MARKING STD 1A, specifying key elements such as manufacturer and CAGE code, manufacturing and expiration dates, contract and lot numbers, and the unit designation 1 BT = 4 OZ. The product is subject to FDA regulation and requires pre-award referral through EBS for validation. Packaging must be commercial-grade, sealed to prevent damage, and shipped in exterior containers ensuring safe transit at minimal cost, adhering to DLA’s packaging directives over ASTM D3951 when applicable, with all marking strictly following MIL-STD-129 despite references to MMS No. 1. The material is classified as non-hazardous per FED-STD-313 and must be shipped by traceable means only, prohibiting parcel post. Two delivery points are specified: Fort Bragg, NC and Fort Bliss, TX, each requiring shipment within 20 days of contract award with no tolerance for quantity variance. Delivery is FOB destination, with inspection and acceptance occurring at the final location. The solicitation lists Cardinal Health 200, LLC and Purdue Pharma LP as potential manufacturers under NDC 67618-0150-04, and procurement is coordinated through DLA Troop Support, with point of contact Shairy M. Cartagena.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 19 hours ago

DEADLINE

ZINC OXIDE OINTMENTZinc Oxide Ointment USP, containing 20% zinc oxide in a 28.35 gram collapsible tube, is a topical skin protectant procured under solicitation SPE2DP-26-T-4279 with a requirement for five units of issue. The product must comply with the latest Medical Marking Standard No. 1, be labeled with NDC 67777-0223-11, and be manufactured by Dynarex Corp under part number 1TVZ3. It is subject to a non-extendable shelf life of 36 months as a TYPE I Q-coded item and must be stored at controlled room temperature not exceeding 30°C. Packaging must adhere to DLA Packaging Requirements for Procurement, MIL-STD-129, and ASTM D3951 if non-hazardous, with all markings and labeling controlled by the DLA Master List of Technical and Quality Requirements. The item is regulated by the FDA, requiring referral through EBS for confirmation, and is subject to Covered Defense Information protocols. Delivery is FOB destination within 20 days of contract award, with no variance allowed in quantity, inspection and acceptance occurring at the destination point. The sole delivery address is W51JYU, 0165 CS HHC HHC Combat Sustainment, Bossier City, LA 71111-5397, and shipment must be sent via traceable means, excluding parcel post. The contract specifies a unit price of $5.00 per tube, totaling $25.00, with the original required delivery date set for July 28, 2026. All technical and quality obligations referenced by R-numbers are governed by the DLA Master List in effect on the solicitation issue date, and the product must be palletized in accordance with RP001. Government use only identifiers and tracking codes, including the TCN and SUPP ADD, are included for logistics and accountability purposes, with the contracting office listed as the Department of Defense, Medical Supply Chain PHARM FSA.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 19 hours ago

DEADLINE

VECURONIUM BROMIDE FORVecuronium Bromide for Injection is a freeze-dried powder containing 10 mg of the active ingredient, supplied in packages of ten vials per unit, with a total shelf life of 24 months. At the time of receipt by the first government activity, the product must have a minimum of 21 months of remaining shelf life, and storage must be maintained at controlled room temperature between 20 to 25°C (68 to 77°F), protected from light and retained in its original carton until use. The item is classified as a Type I (Code M) medical supply with a non-extendable shelf life, and all packaging and marking must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129. Each unit must be sealed in a protective container and packed in commercial shipping containers ensuring safe delivery at the lowest cost to the specified destination, with strict adherence to hazardous materials shipping protocols. The product, manufactured by Hikma Pharmaceuticals USA Inc., is identified by NDC 00143-9234-10 and NSN 6505-01-258-0983, and is required for delivery to JBER, Alaska, under contract SPE2DP-26-T-4283 with a firm delivery date of July 28, 2026. The procurement specifies a fixed quantity of three units totaling two packages, with no variance permitted, and all shipments must be routed through designated government freight and parcel post addresses. Compliance with DLA packaging, technical, and quality requirements, as outlined in the DLA Master List and supporting directives, is mandatory.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 19 hours ago

DEADLINE

TOLNAFTATE POWDER, UThe contract specifies the procurement of Tolnaftate Powder, USP 1%, in 45-gram units, with a total quantity of two BT units, each equivalent to 45 grams, under solicitation SPE2DP-26-T-4282. The item is designated as a Type I (Code Q) medical product with a strict non-extendable shelf life of 36 months, and packaging must comply with commercial standards as outlined in the procurement document, ensuring protection against damage and secure transit via common carrier at the lowest cost to the delivery point. All packaging and labeling must adhere to Medical Marking Standard No. 1, which supersedes MIL-STD-129, and includes proper identification and marking requirements for defense-related materials. Delivery is required FOB destination within five days, with no variance permitted in quantity, and inspection and acceptance occur at the destination. The item is sourced from Geri-Care Pharmaceuticals Corp. under NDC57896-0199-45, and the contract mandates compliance with DLA’s Technical and Quality Requirements as defined in the DLA Master List, with applicable provisions for Covered Defense Information. The place of performance is Mountain Home AFB, ID, and the contracting office is the Department of Defense’s Medical Supply Chain Pharm FSA, with point of contact Imerah Burnett.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 19 hours ago

DEADLINE

RINGER'S INJECTION, LACRINGER'S INJECTION, LACTATED, USP, 1000ML, in packs of 12 units per case, is subject to strict packaging and marking requirements mandated by the Department of Defense. Each unit must be sealed in a protective container to prevent damage or breakage, and all shipments must be packed in commercial exterior containers suitable for safe transport via common carrier at the lowest cost to the designated delivery point. Packaging must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and all markings must adhere to the latest edition of this standard as published by DLA Troop Support. The product is regulated by the FDA and requires confirmation by a product specialist prior to award, with bidder and manufacturer details submitted through EBS. The item has a non-extendable shelf life of 30 months and must be stored at room temperature (25°C), with brief exposure to up to 40°C permitted without adverse effects. It is prohibited from freezing and must be protected from excessive heat. The contract specifies a quantity of 2 packaging groups, each containing 12 units, for delivery to Dyess AFB within 20 days under FOB destination terms with zero variance allowed. Inspection and acceptance occur at the delivery point, and the item is identified by NSN 6505-01-330-6267 and manufacturer part number NDC00264-7750-00 under B. BRAUN MEDICAL INC. The solicitation, issued under contract SPE2DP-26-T-4292, has an August 3, 2026 response deadline and falls under NAICS code 325412 for pharmaceutical manufacturing.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 19 hours ago

DEADLINE

TEST STRIPS AND COLORThe contract specifies the procurement of test strips and color charts for urine analysis, detecting bilirubin, blood, glucose, ketone, leukocytes, nitrite, pH, protein, specific gravity, and urobilinogen. Each unit of issue is a bottle containing 100 strips, and the item is identified by NSN 6550-01-221-5400 with a purchase quantity of four bottles. The product must comply with stringent technical and quality requirements referenced in the DLA Master List, and packaging must adhere to commercial standards as well as the Medical Marking Standard No. 1, which supersedes MIL-STD-129. Each unit must be sealed in a protective container, and shipping containers must ensure safe, cost-effective delivery to the specified FPO address. The item is classified as a Type I (Code K) with a non-extendable shelf life of 18 months, and no more than two months may have elapsed between the date of manufacture and the delivery date to the government. All labels must clearly indicate the date of manufacture, expiration or retest date, and the contract or lot number, in accordance with the latest MMS1C guidelines. The solicitation was issued under SPE2DS-26-T-269W with a response deadline of August 3, 2026, and delivery is required within 20 days after award.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 19 hours ago

DEADLINE

DEXTROSE, POTASSIUM CHLThe contract specifies the procurement of 1000 mL sterile injection solution containing 5 percent dextrose, 0.15 percent potassium chloride, and 0.45 percent sodium chloride, manufactured by Baxter Healthcare Corporation under NDC 00338-0671-04 and part number 2B1654X, packaged in units of 14 per pack (PG), with a total quantity of one unit. The item is regulated by the FDA and subject to strict packaging, marking, and shelf-life requirements; it must have a non-extendable 24-month shelf life and be commercially packaged to protect against damage during transit. All packaging and labeling must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and must adhere to DLA’s Master List of Technical and Quality Requirements, which take precedence over other standards such as ASTM D3951. Hazardous material handling protocols under FED-STD-313 and TQ requirement IP025 apply if applicable. The item must be palletized in accordance with DLA packaging requirements, shipped via the fastest traceable means excluding parcel post, and delivered FOB destination to Fort Stewart, Georgia within 20 days of contract award. The required delivery date is July 24, 2026, with zero variance allowed in quantity. The solicitation number is SPE2DP-26-T-4278, with a response deadline of August 3, 2026, and the North American Industry Classification System code is 325412. Government use designation and shipping instructions include specific codes and identifiers for logistics and tracking purposes.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 19 hours ago

DEADLINE

CHLORINE TEST REAGEThe contract specifies the procurement of Chlorine Test Reagent, a DPD total chlorine reagent supplied in 100 powder pillows, each designed for a 10 mL sample size, with the unit of issue being one package containing 100 pillows. The item is identified by NSN 6550-01-460-7597 and must meet stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. It is subject to DLA packaging standards, including commercial packaging for all medical acquisitions, requiring each unit to be sealed in a protective container and shipped in suitable exterior packaging to ensure safe delivery at the lowest carrier rate. All markings must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and must include the date of manufacture, expiration or retest date, and the contract or lot number in accordance with the latest revision of MMS1C. The item is classified as a TYPE I (CODE S) with a mandatory 60-month shelf life that is non-extendable, and no more than eight months may have passed between the date of manufacture and the date of delivery to the government. The solicitation, issued under SPE2DS-26-T-269Y on July 26, 2026, requires delivery within 20 days after order and is managed by the Department of Defense’s Medical Supply Chain, with Seth Tootell as the primary point of contact.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 19 hours ago

DEADLINE

RINGER'S INJECTION, LACRINGER'S INJECTION, LACTATED, USP in 500 mL units, packaged 24 per case, is procured under contract SPE2DP-26-T-4281 with a total quantity of two cases, delivered FOB destination within 20 days. Each case must contain intact, sealed unit containers protecting the product from damage, with exterior shipping containers compliant with commercial standards and marked according to Medical Marking Standard No. 1, replacing all references to MIL-STD-129. The item has a non-extendable shelf life of 18 months, requiring at least 15 months of remaining shelf life upon delivery to the first government activity, and must be stored at controlled room temperature not exceeding 25°C. The product is regulated by the FDA, with supplier and manufacturer details including B. B Braun Medical Inc. and Baxter Healthcare Corp, identified by NDC 00264-7750-10 and part numbers L7501 and 2B2323Q. Packaging and quality requirements adhere to the DLA Master List of Technical and Quality Requirements, with all procurement governed by DLA packaging and medical acquisition standards. The National Stock Number is 6505014623022, and the unit of issue is PG, where one PG equals 24 units. Inspection and acceptance occur at the destination, with no variance allowed in quantity. Delivery is to Fort Bliss, Texas, with primary point of contact Daniel Porter at DLA Troop Support.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 19 hours ago

DEADLINE

SODIUM CHLORIDE INJECTSodium Chloride 0.9% Injection USP in 100 mL units is being procured under solicitation SPE2DP-26-T-4290 with a required delivery within five days to Fort Bragg, North Carolina, delivered FOB destination. The item is supplied by Baxter Healthcare under NDC 00338-0553-18 and part number 2B0043, packaged as one package containing 80 units, with no variance allowed in quantity. The product is regulated by the FDA and must comply with all federal medical procurement standards, including the Medical Marking Standard No. 1, which supersedes MIL-STD-129 and governs labeling and packaging requirements to ensure safe handling and transport. The item is classified as a TYPE I (CODE M) with a non-extendable shelf life of 24 months from the date of manufacture, and all packaging must meet commercial standards while ensuring protection against damage and breakage during transit. The contract requires compliance with DLA’s Master List of Technical and Quality Requirements, and any referenced technical or quality specifications are incorporated by reference from the official DLA website. The acquisition is subject to the Covered Defense Information provisions, and the contracting official must submit an EBS referral for FDA-regulated product confirmation, including full manufacturer and bidder details. The unit of issue is PG (package), with a total quantity of one PG, and the item’s NSN is 6505013841365.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 19 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA Troop Support

Same awarding agency

39--SLING,MULTIPLE LEGThe contract seeks the procurement of 159 sling, multiple leg items under NSN 3940015410894, with quantities divided across three lines: 157 units to be delivered within 359 days, one unit within 90 days, and another unit within 299 days, all to be delivered to DLA Distribution at W1A8. The solicitation is issued as a HUBZone Set Aside under solicitation number SPE8EE26T2176, exclusively open to qualified small businesses located in historically underutilized business zones, as defined by the NAICS code 332618. All responsible sources may submit electronic quotes, which must be received no later than August 6, 2026, with responses required through the designated electronic platform. The procurement is managed by the DLA Troop Support office located in Philadelphia, Pennsylvania, and inquiries must be directed via email to the designated point of contact listed in the solicitation document, with additional information accessible through the SAM.gov portal using the provided solicitation number.

Other Fabricated Wire Product Manufacturing

POSTED

about 24 hours ago

DEADLINE

42--CARTRIDGE,COMPRESSEThe procurement is for 2,560 units of NSN 4220017019119 CARTRIDGE, COMPRESSE, to be delivered to W1A8 DLA DISTRIBUTION within 84 days after award. The only approved source for this item is 78673 S-1781-1. This is a competitive solicitation issued as an RFQ with no hard copies available; all quotes must be submitted electronically through the provided SAM.gov link. The solicitation does not include specifications, plans, or drawings, and all responsible sources are invited to respond if submissions are received by the deadline. The NAICS code is 332510, and the contracting office is DLA Troop Support, located in Philadelphia, Pennsylvania. The response deadline is August 6, 2026, and inquiries should be directed via email to the point of contact listed in the solicitation’s block 5, referenced through the Additional Information link on the SAM.gov page.

Hardware Manufacturing

POSTED

about 24 hours ago

DEADLINE

69--SKID,MOLDEDThe U.S. Department of Defense, through DLA Troop Support, is seeking quotes for 115 molded skids with NSN 6920011686145 under solicitation SPE8E626T3868, with delivery required to DLA Distribution Red River within 144 days of award. This procurement is a total small business set-aside classified under NAICS code 326199, exclusively open to small business concerns as defined by the SBA. Only approved sources listed as 81860 13031726 and 81860 13031726/04 are eligible to respond, and all quotes must be submitted electronically via the SAM.gov portal; hard copies are not accepted. No specifications, plans, or drawings are available for this requirement, and responsible sources are encouraged to review the solicitation posted online by the listed deadline of August 6, 2026. The point of contact for inquiries is designated through the solicitation’s Additional Information link or via the DIBBS website using the solicitation number, and all communication must be directed to the provided email address. The office is located in Philadelphia, Pennsylvania, with no specific place of performance identified beyond the delivery address.

All Other Plastics Product Manufacturing

POSTED

about 24 hours ago

DEADLINE

62--LIGHT,INDICATORThe solicitation seeks procurement of 106 indicator lights under NSN 6210013342919, with 105 units required for delivery to W1A8 DLA DISTRIBUTION within 231 days after award and one additional unit to be delivered within 111 days after award. The opportunity is a Total Small Business Set-Aside under FAR 19.5, restricted exclusively to small businesses, and falls under NAICS code 334419 for other electrical equipment and component manufacturing. All responsible sources may submit electronic quotes, which must be received by the deadline of August 6, 2026. The solicitation is issued by the Department of Defense through DLA Troop Support, with the contracting office located in Philadelphia, Pennsylvania. Questions regarding the solicitation must be directed via email to the designated point of contact, and full details are available through the SAM.gov workspace or the DIBBS solicitation portal using the reference number SPE8E726T3402.

Other Electronic Component Manufacturing

POSTED

about 24 hours ago

DEADLINE

95--ARMOR CMPST PANELThe solicitation seeks quotes for 35 units of ARMOR CMPST PANEL with NSN 9535015692367, to be delivered to W1A8 DLA DISTRIBUTION within 134 days after award. Only two approved sources are listed for this item: 0FPA5 880173030 and 70876 46319-028. The procurement is conducted via a Request for Quote (RFQ) under solicitation number SPE8E4426T1927, with quotes required to be submitted electronically by the deadline of August 6, 2026. No hard copies of the solicitation or associated technical documents such as specifications, plans, or drawings are available. The procurement is open to all responsible sources capable of meeting the requirements, with no set-aside designated. The activity is managed by DLA Troop Support under the Department of Defense, with the office located in Philadelphia, Pennsylvania. All inquiries must be directed via email to the point of contact provided, and the full solicitation can be accessed through the SAM.gov link, with additional guidance available on the DIBBS website using the solicitation number.

Iron and Steel Forging

POSTED

about 24 hours ago

DEADLINE

45--STRAINER,WASTE DRAIThe U.S. Department of Defense, through DLA Troop Support, is seeking quotations for 260 units of NSN 4510016493042, STRAINER,WASTE DRAI, under solicitation SPE8E826T4851. This procurement is a total small business set-aside, restricted solely to small businesses as defined by the SBA, and the NAICS code 332913 applies. Quotes must be submitted electronically by the deadline of August 6, 2026, and only responsible sources are eligible to respond. Delivery is required to W1A8 DLA DISTRIBUTION within 72 days after contract award. The approved source for this item is 57701 DD 20 C 100, though no specifications, plans, or drawings are available. The solicitation is posted online only and cannot be obtained in hard copy. All inquiries must be directed via email to the point of contact listed in the solicitation document, accessible through the provided SAM.gov link. The contracting office is located in Philadelphia, Pennsylvania.

Plumbing Fixture Fitting and Trim Manufacturing

POSTED

about 24 hours ago

DEADLINE

69--TRAINING DEVICE,FIRThe contract is for the procurement of 79 units of the TRAINING DEVICE, FIR with NSN 6920015649657, to be delivered to W1A8 DLA DISTRIBUTION within 77 days after award. The approved source for this item is KE396 01-0916, and only electronic quotes will be accepted. The solicitation, identified as SPE8E626T3866, is an unrestricted RFQ open to all responsible sources that submit timely responses, with no hard copies available. Specifications, plans, or drawings are not provided, and bidders must rely on the information in the solicitation document accessible via the online link. Submissions must be uploaded electronically before the deadline of August 6, 2026, and the opportunity was posted on July 26, 2026. The procurement falls under NAICS code 332312 and is managed by DLA Troop Support, headquartered in Philadelphia, Pennsylvania. All inquiries regarding the solicitation must be directed to the point of contact listed in the document, with a designated email provided for questions.

Fabricated Structural Metal Manufacturing

POSTED

about 24 hours ago

DEADLINE

17--COUNTER AND CHUTE AThe U.S. Department of Defense through DLA Troop Support is soliciting quotes for four units of NSN 1730010824002, COUNTER AND CHUTE A, to be delivered to W1A8 DLA DISTRIBUTION within 67 days after award. The procurement is conducted under solicitation number SPE8EF26T1513, posted on July 26, 2026, with quotes due by August 6, 2026. This is a combined solicitation open to all responsible sources, and responses must be submitted electronically through the SAM.gov portal; no hard copies are available. Digitized drawings, military specifications, and standards can be accessed or ordered electronically. The National Industrial Classification Code for this procurement is 336413, indicating it involves aerospace product and parts manufacturing. The contracting office is located in Philadelphia, Pennsylvania, and all inquiries must be directed via email to the designated point of contact, with further details available through the provided SAM.gov link or DIBBS website using the solicitation number.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 24 hours ago

DEADLINE

58--ELECTRONIC VIDEO MIThe contract solicitation under number SPE8EN26T2688 seeks the procurement of seven units and one additional unit of NSN 5836015027638, ELECTRONIC VIDEO MI, with delivery required to W1A8 DLA DIST SAN JOAQUIN. The seven-unit line has a delivery timeline of 594 days after order award, while the single-unit line requires delivery within 410 days. This is a Total Small Business Set-Aside under FAR 19.5, meaning only small business concerns are eligible to compete, and it falls under the NAICS code 336413 for Aerospace Product and Parts Manufacturing. The solicitation is issued by DLA Troop Support, part of the Department of Defense, with the office located in Philadelphia, Pennsylvania. All responsible sources may submit electronic quotes, which must be received by the deadline of August 6, 2026. Questions regarding the solicitation should be directed via email to DibbsBSM@dla.mil, and further details can be accessed through the SAM.gov workspace link provided.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 24 hours ago

DEADLINE

Subcontract Management and ReportingThe contract requires the prime contractor to maintain detailed documentation of any subcontractors involved in manufacturing or material supply, including the full legal names and CAGE codes of each entity. This obligation ensures traceability and accountability across the supply chain for defense-related activities under the oversight of the Department of Defense through DLA Troop Support. Failure to properly record and report this information could result in noncompliance with contractual obligations and potential penalties. The solicitation, classified under NAICS code 541611, pertains to administrative management and general management consulting services related to subcontract oversight. Although no set-aside type is specified, the contract is open to eligible bidders responding by the deadline of August 7, 2026, at 7:00 PM. Performance location and point of contact details are not provided, but all subcontracts must be reported in accordance with federal acquisition regulations. The contract was posted on July 24, 2026, and the official details can be accessed through the SAM.gov workspace link.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Logistics and Delivery to Austin, TX (FOB Destination)The contract pertains to the logistics and delivery of finished units from the contractor’s facility to a specified destination at 4512 South Pleasant Valley Road, Austin, TX 78744, under FOB Destination terms, meaning the contractor assumes responsibility for all transportation costs and risks until the goods arrive at the designated location. The work is classified under NAICS code 484220, which corresponds to truck transportation of freight, and is structured as a subcontract within the Department of Defense’s procurement framework managed by DLA Troop Support. The opportunity was posted on July 24, 2026, with a firm deadline for responses set for August 7, 2026, at 7:00 p.m. local time. All delivery operations must be executed in full compliance with the FOB Destination requirement, placing the onus on the contractor to ensure timely, secure, and undamaged transit of the finished units to the specified Texas address.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Product Demonstration Model (PDM) FabricationThe contract titled Product Demonstration Model (PDM) Fabrication is a subcontract aimed at developing pre-production prototypes or demonstration units for government testing and evaluation before any full-scale procurement decision is made. It is issued under the NAICS code 541330, which corresponds to engineering services, indicating that the work involves technical design, modeling, and fabrication capabilities to produce functional representations of a proposed system or product. The effort is intended to support the Department of Defense through DLA Troop Support, with the goal of gathering critical data and feedback to inform subsequent contracting decisions. Responses are due by August 7, 2026, and the opportunity was posted on July 24, 2026, providing potential offerors approximately three weeks to prepare and submit proposals. While no specific place of performance or point of contact is listed, the nature of the contract implies that deliverables will be tailored to meet detailed government evaluation criteria, likely involving rigorous technical validation and performance benchmarks.

Engineering Services

POSTED

DEADLINE