65 -- Pharmacy Fixtures - Satelitte

Description: This is a solicitation for commercial items prepared in accordance with the format in Federal Acquisition Regulation, Part 12. This announcement constitutes a Request for Quotation; proposals are being requested. Solicitation number FM460072480295 is issued as a request for quotation. Quotes must be good for 60 days. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-04. The North American Industry Classification System (NAICS) code is 423450. The business size standard is 100 employees. Offutt AFB intends to issue a Brand Name or Equal Request for Quotation (RFQ) for the following items; Elevation# Nomenclature QTY Lionville Part# or equal Modular Speciality Pharmacy Fixtures to include back panels, side panels, adjustable shelves and all hardware/material necessary for installation. Measurements are approximated to provide maximum storage space in available room; slight variation allowed due to variation in vendor's products. Vendors to provide design proposal for evaluation with their quote. Drawings are rough layout requirements. Vendors should try to achieve a layout as shown in the drawing provided. Description of Areas 1 84" high x 72" wide x 24" deep dispensing/shelving/work space system with 1-1/4" or better laminate covered particle board countertop (38" from floor) and back panels 18 gauge steel or better with powder coated finish. Must be able to be connected in straight, corner, T or X configuration to include the following configuration: 1 Contains part#s TCTR; S12-R (4 each); TD (16 each); and BDP (1 each) Overcounter: Adjustable shelves for flat or gravity-feed use to cover entire width 4 Backsplash 4" 1 Undercounter: One bottle gravity-feed drawer with adjustable front to back dividers 2 Drawer with reduced height front for shelf visibility 4 Drawer, 6 to 8" deep 1 2 84" high x 72" wide x 24" deep dispensing/shelving/work space system with 1-1/4" or better laminate covered particle board countertop (38" from floor) and back panels 18 gauge steel or better with powder coated finish. Must be able to be connected in straight, corner, T or X configuration to include the following configuration: 1 Contains part#s TCTR; TCCTR; S12-R(8 each); US (6 each); SCS (2 each); and SCM (2 each) Overcounter: Adjustable shelves for flat or gravity-feed use to cover entire width 4 Backsplash 4" 1 Undercounter: Adjustable shelves for flat or gravity-feed use to cover entire width 4 Adjustable shelves for flat or gravity-feed use to cover entire width 4 Necessary matching countertop, back panels, shelves and supports to connect to elevation #1 in "L" shape 1 3 84" high x 108" wide x 18" deep shelving system made of a minimum of 3/4" particleboard and finished with high pressure laminate (or better) to include minimum of 8 adjustable shelves (minimum 75 lbs evenly distributed weight capacity per shelf required). Must have back and side panels (integral end). 1 Contains part# 18" x 36" WBS (3 each) 4 84" high x 144" wide x 18" deep shelving system made of a minimum of 3/4" particleboard and finished high pressure laminate (or better) to include minimum of 8 adjustable shelves (minimum 75 lbs evenly distributed weight capacity per shelf required). Must have back and side panels (integral end). 1 Contains part# 18" x 48" WBS (6 each) 5 84" high x 66" wide x 18" deep shelving system made of a minimum of 3/4" particleboard and finished high pressure laminate (or better) to include minimum of 8 adjustable shelves (minimum 75 lbs evenly distributed weight capacity per shelf required). Must have back and side panels (integral end). 1 Contains part# 18" x 36" WBS (4 each) and 18" x 30" WBS (4 each) 6 84" high x 66" wide x 18" deep shelving system made of a minimum of 3/4" particleboard and finished high pressure laminate (or better) to include minimum of 8 adjustable shelves (minimum 75 lbs evenly distributed weight capacity per shelf required). Must have back and side panels (integral end). 1 Contains part# 18" x 36" WBS (1 each)and 18" x 30" WBS (1 each) 7 Left intentionally blank 8 84" high x 144" wide x 18" deep shelving system made of a minimum of 11/4" particleboard and finished high pressure laminate (or better) to include minimum of 8 adjustable shelves (minimum 75 lbs evenly distributed weight capacity per shelf required). Must have back and side panels (integral end). 1 Contains part# 18" x 36" WBS (4 each) 9 84" high x 144" wide x 18" deep shelving system made of a minimum of 3/4" particleboard and finished high pressure laminate (or better) to include minimum of 8 adjustable shelves (minimum 75 lbs evenly distributed weight capacity per shelf required). Must have back and side panels (integral end). 1 Contains part# 18" x 36" WBS (4 each) 10 84" high x 36" wide x 12" deep shelving system made of a minimum of 3/4" particleboard and finished high pressure laminate (or better) to include minimum of 8 adjustable shelves (minimum 75 lbs evenly distributed weight capacity per shelf required). Must have back and side panels (integral end). 1 Contains part# 12" x 36" WBS (1 each) 11 84" high x 120" wide x 24" deep dispensing/shelving system with 1-1/4" or better laminate covered particle board countertop (38" from floor) and back panels 18 gauge steel or better with powder coated finish. Must be able to be connected in straight, corner, T or X configuration to include the following configuration: 1 Contains part#s TCTR; S12-R (12 each); TD (12 each); and BDP (1 each) Overcounter: Adjustable shelves for flat or gravity-feed use to cover entire width 4 Backsplash 4" 1 Undercounter: 24" wide one bottle gravity-feed drawer with adjustable front to back dividers 2 24" wide drawer with reduced height front for shelf visibility 12 24" wide drawer, 6 to 8" deep 1 12 84" high x 84" wide x 24" deep dispensing/shelving system with 1-1/4" or better laminate covered particle board countertop (38" from floor) and back panels 18 gauge steel or better with powder coated finish. Must be able to be connected in straight, corner, T or X configuration to include the following configuration: 1 Contains part#s TCTR; S12-R (2 each); TD (4 each); D3 (1 each) and D4 (4 each) Overcounter: Shelves to cover entire width 2 Backsplash 4" 1 Undercounter: 24" wide drawer with reduced height front for shelf visibility 3 24" wide drawer, 4 " deep minimum; laminated 3/4" particle board with steel ball bearings/sliders 4 24" wide drawer, 3 " deep minimum; laminated 3/4" particle board with steel ball bearings/sliders 1 Knee Space, 36" wide minimum 1 13 84" high x 168" wide x 18" deep shelving system made of steelto include minimum of 8 adjustable shelves 2 Contains part# 18" x 48" BS (4 each) and 18" x 36" BS (4 each) 14 84" high x 152" wide x 24" deep shelving/work space system with 1-1/4" or better laminate covered particle board countertop (29" from floor) and back panels 18 gauge steel or better with powder coated finish. Must be able to be connected in straight, corner, T or X configuration to include the following configuration: 1 Contains part#s TCCTR; S12-R (6 each); FD (2each); SCS (4 each) Overcounter: Adjustable shelves for flat or gravity-feed use to cover entire width 2 Backsplash 4" 1 Undercounter: 24" wide Pedestal style file with 1 file drawer, one minimum 5" deep drawer, and one minimum 4" deep drawer. Must be laminated minimum 3/4" particle board with steel ball bearings/sliders. 2 Knee Space, 32" wide minimum 2 Left and Right angle transition backs, supports and countertop as shown in drawing (to connect to elevation 15 and 16) 1 15 84" high x 110" wide x 24" deep shelving/work space system with 1-1/4" or better laminate covered particle board countertop (29" from floor) and back panels 18 gauge steel or better with powder coated finish. Must be able to be connected in straight, corner, T or X configuration to include the following configuration: 1 Contains part#s TCTR S12-R (4 each); FD (1 each); D3 (1 each) and D4 (4 each) Overcounter: Adjustable shelves for flat or gravity-feed use to cover entire width 2 Backsplash 4" 1 15 cont Undercounter: 24" wide Pedestal style file with 1 file drawer, one minimum 5" deep drawer, and one minimum 4" deep drawer. Must be laminated minimum 3/4" particle board with steel ball bearings/sliders. 1 24" wide Drawer, 4 " deep minimum; laminated 3/4" particle board with steel ball bearings/sliders 4 24" wide Drawer, 3 " deep minimum; laminated 3/4" particle board with steel ball bearings/sliders 1 Knee Space, 44" wide minimum 1 16 84" high x 110" wide x 24" deep shelving/work space system with 1-1/4" or better laminate covered particle board countertop (29" from floor) and back panels 18 gauge steel or better with powder coated finish. Must be able to be connected in straight, corner, T or X configuration to include the following configuration: 1 Contains part#s S12-R (4 each); FD (1 each); D3 (1 each) and D4 (4 each) Overcounter: Adjustable shelves for flat or gravity-feed use to cover entire width 2 Backsplash 4" 1 Undercounter: Pedestal style file with 1 file drawer, one minimum 5" deep drawer, and one minimum 4" deep drawer. Must be laminated minimum 3/4" particle board with steel ball bearings/sliders. 1 Drawer, 4 " deep minimum; laminated 3/4" particle board with steel ball bearings/sliders 4 Drawer, 3 " deep minimum; laminated 3/4" particle board with steel ball bearings/sliders 1 Knee Space, 44" wide minimum 1 17 84" high x 218" wide x 24" deep shelving system with back panels 18 gauge steel or better with powder coated finish. 1 Contains part number S12-R (5 each) Shelving to cover entire width 10 18 84" high x 72" wide x 24" deep dispensing/shelving system with 1-1/4" or better laminate covered particle board countertop (38" from floor) and back panels 18 gauge steel or better with powder coated finish. Must be able to be connected in straight, corner, T or X configuration to include the following configuration: 1 Contains part#s TCTR; S12-R (4 each) and TD (8 each) Overcounter: Adjustable shelves for flat or gravity-feed use to cover entire width 4 Backsplash 4" 1 Undercounter: 24" wide drawer with reduced height front for shelf visibility 8 19 84" high x 218" wide x 24" deep dispensing/shelving system with 1-1/4" or better laminate covered particle board countertop (38" from floor) and back panels 18 gauge steel or better with powder coated finish. Must be able to be connected in straight, corner, T or X configuration to include the following configuration: 1 Contains part#s TCTR; TCCTR; S12-R(16 each); US (3 each); TD (8 each); BDP (3 each); SCS (4 each); and SCM (4 each) Overcounter: Adjustable shelving for flat or gravity-feed use across whole width 4 Backsplash 4" 1 Undercounter: 24" wide Drawer with reduced height front for shelf visibility 8 24" wide One bottle gravity-feed drawer with adjustable front to back dividers 6 24" wide drawer, 6 " deep minimum; laminated 3/4" particle board with steel ball bearings/sliders 3 24" wide adjustable shelf for flat or gravity-feed use 3 24" wide minimum open space for small refrigerator 1 Left and Right angle transition backs, supports and countertop as shown in drawing (to connect to elevation 18 and 20) 1 20 84" high x 144" wide x 24" deep dispensing/shelving system with 1-1/4" or better laminate covered particle board countertop (38" from floor) and back panels 18 gauge steel or better with powder coated finish. Must be able to be connected in straight, corner, T or X configuration to include the following configuration: 1 Contains part#s TCTRS12-R(12 each); US (2 each); TD (8 each) Overcounter: Adjustable shelf for flat or gravity-feed use to cover entire width 4 Backsplash 4" 1 Undercounter: 24" wide drawer with reduced height front for shelf visibility 8 21 84" high x 120 wide x 12" deep shelving system made of a minimum of 3/4" particleboard and finished high pressure laminate (or better) to include minimum of 8 adjustable shelves (minimum 75 lbs evenly distributed weight capacity per shelf required). Must have back and side panels (integral end). 1 Contains part# 12" x 36" WBS (8 each) and 12" x 48" WBS (4 each) 22 84" high x 24" wide x 8 deep shelving system made of a minimum of 3/4" particleboard and finished high pressure laminate (or better) to include minimum of 8 adjustable shelves (minimum 75 lbs evenly distributed weight capacity per shelf required). Must have back and side panels (integral end). 1 Contains part# 8" x 24" WBS (2 each) 23 84" high x 36" wide x 12" deep shelving system made of a minimum of 3/4" particleboard and finished high pressure laminate (or better) to include minimum of 8 adjustable shelves (minimum 75 lbs evenly distributed weight capacity per shelf required). Must have back and side panels (integral end). 1 Contains part# 12" x 36" WBS (2 each) with finished back 24 84" high x 72 wide x 24" deep shelving/work space system with 1-1/4" or better laminate covered particle board countertop (39" from floor) and back panels 18 gauge steel or better with powder coated finish. Must be able to be connected in straight, corner, T or X configuration to include the following configuration: 1 Contains part#s TCTR; S12-R(4 each); FD (1 each); D3 (1 each) and D4 (2 each) Overcounter: Adjustable shelves for flat or gravity-feed use to cover entire width 2 Backsplash 4" Undercounter: 16" pedestal style file with 1 file drawer, one minimum 5" deep drawer, and one minimum 4" deep drawer. Must be laminated minimum 3/4" particle board with steel ball bearings/sliders. 1 24" wide drawer, 4 " deep minimum; laminated 3/4" particle board with steel ball bearings/sliders 2 24" wide drawer, 3 " deep minimum; laminated 3/4" particle board with steel ball bearings/sliders 1 Knee Space, 32" wide minimum 25 84" high x 72" wide x 18" deep shelving system made of a minimum of 3/4" particleboard and finished high pressure laminate (or better) to include minimum of 8 adjustable shelves (minimum 75 lbs evenly distributed weight capacity per shelf required). Must have back and side panels (integral end). 1 Contains part# 18" x 36" WBS (2 each) Additional Items required (not shown on drawing): 3" Unit Dose Bins 450 6" Unit Dose Bins 360 9" Unit Dose Bins 216 Bin Labels to fit unit dose bins 4,000 3-Channel Non-Metallic Electrical Raceway. Must accept standard duplex electrical outlets, telephone jacks and data device boxes (installation not icluded) 80 Linear Feet Installation including uncrating and assembly of furniture. Disposal of waste in government owned dumpsters Freight (FOB Destination) Colors will be selected from vendor's standard colors upon award Furniture/Fixtures should not exceed 85" in height Steel Shelves should be able to convert to gravity feed with appropriate front lip Pharmacy Fixtures and furniture shall be made of like material to present a matched look All fixtures should be capable of being independently leveled Pharmacy refrigerator with the following specifications: 1 Upright double-door refrigerator, +2 to +4 degrees C Textured grey powder coat exterior, white interior. Forced air circulation, expansion valve mechanical system 120Volt/60 hertz; GEM part# 2-DR OR Equal Buffalo Supply Undercounter refrigerator with the following specifications: 1 Power: 120 volt/60 hertz U.L. Approved 100% CFC Free Automatic defrost Fan cooled compressor Internal fan Wrapped stainless steel body (3) Stainless steel drawers (3) Stainless steel recessed handles Adjustable thermostat Finish: Seamless stainless steel cabinet with 3 wrapped stainless steel drawers with recessed stainless steel handles. Max Dimensions(H x W x D): 32 3/4" x 23 3/4" x 23 1/2" Lobby Furniture to include the following: Indiana Furniture Klarete Guest Chair cat #776 with decorative wood and upholstered back OR EQUAL 12 Pharmacy Indiana & Highmark Highmark Cabo mid back task chair fabric grade E, cat #D4 A27 OR EQUAL 4 Highmark Sprint Plush stool cat#5519 fabric grade E; OR EQUAL 3 Highmark Rebound mid back task chair cat # 6407 fabric grade E; OR EQUAL 6 Indiana Furniture end table Cat# 57-2424ET; OR EQUAL 2 Personnel Lockers Lionville Single Tier 12" W x 15" D X 72" H 8 Double Tier 12"W x 15" D x 72" H 4 Installation is required and will be included on the quotation as a separate line item. Installation will be on the first floor. Floor plans are available upon request via email to jonathan.jones@offutt.af.mil or austin.derose@offutt.af.mil . Government intends to issue one contract. The government reserves the right to accept and consider partial quotations. CONTRACTOR MUST BE REGISTERED IN CENTRAL CONTRACTOR REGISTRATION (CCR) PRIOR TO AWARD. IF NOT ALREADY REGISTERED IN CCR, GO TO WWW.CCR.GOV TO REGISTER PRIOR TO SUBMITTING QUOTE. NO PARTIAL QUOTES WILL BE CONSIDERED. NO PARTIAL AWARDS WILL BE ALLOWED. ALL CONTRACTORS SHALL BE ORCA REGISTERED WWW.ORCA.BPN.GOV. The clause at FAR 52.212-1, Instructions to Offerors ? Commercial Items, applies to this acquisition along with 52.212-2, Evaluation-Commercial Items: FAR 52.211-6, Brand Name or Equal, FAR 52.232-18, Availability of Funds: FAR 52.212-3, Offeror Representations and Certifications ? Commercial Items, and the clause at FAR 52-212-4, Contract Terms and Conditions ? Commercial Items, applies to this acquisition. The clause at FAR 52.212-5, Contract Terms and Conditions Required to Implement Statues or Executive Orders ? Commercial Items, applies to this acquisition. Additional, the following FAR clauses cited in 52.212-5 are applicable; 52.222-3 Convict Labor: 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity: 52.222-35, Affirmative Action for Disabled Veterans and Veterans of Vietnam Era. 52.222-36, Affirmative Action for Workers with Disabilities. 52.232-33, Payment by Electronic Funds Transfer ? Central Contractor Registration (31 U.S.C. 3332); 52.223-3 Protest After Award: 52.247-34 F.O.B. Destination; 52.222-3, Convict Labor; 52.222-21 Prohibition of Segregated Facilities; 52.222-37, Employment Records on Disabled Veterans and Veterans of The Vietnam Era; 52.222-41, Service Contract Act;52.222-42 Statement of Equivalent Rates for Hires (29 U.S.C.206 and 41 U.S.C. 351, et seq.); 52.223-5 Pollution Prevention and Right to Know Information; 52.232-33, Payment by Electronic Funds; 52.233-3, Protest After Award; 52.247-34 FOB Destination; 52.252-1, Solicitation Provisions incorporated by reference; 52.252-2 Clauses incorporated by reference; 52.252-5, Authorized Deviation and Provisions; 52.252-6 Authorized Deviation in Clauses; 52.253-1, Computer Generated Forms; applies to this acquisition. The following DFARS clauses also apply to this acquisition: 252.204-7004 Required Central Contracting Registration; 252.212-7001, Contract Terms & Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisition of Commercial Items. Offers are due 4:00 pm CST Tuesday, 25 March 2008. Quotes should be submitted via fax to number (402) 294-7280, or by email to: jonathan.jones@offutt.af.mil . Address any questions to Mr. DeRose at austin.derose@offutt.af.mil or jonathan.jones@offutt.af.mil