Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

6515--Dentsply Axeos Implant Solution Panoramic

Active
36C24626Q0807Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Department of Veterans Affairs is preparing to issue solicitation 36C24626Q0807 on or about August 3, 2026, to procure the Brand Name Only Dentsply Axeos Implant Solution Panoramic for the Asheville VA Medical Center in North Carolina. This is a pre-solicitation notice indicating no formal proposals are being sought at this time, but interested parties should prepare for the upcoming competitive procurement. The acquisition is designated as Full and Open Competition under NAICS Code 339114 with a size standard of 750 employees, and no set-aside provisions apply. All submissions, inquiries, and correspondence must be sent via email to zanona.pickett@va.gov; telephone inquiries will not be accepted. Offerors are responsible for monitoring the Contracting Opportunities page on sam.gov to download all solicitation documents and amendments without awaiting further notice from the Contracting Officer. The response deadline for proposals is scheduled for August 10, 2026, at 3:00 PM Eastern Time, and the contracting office is located in Hampton, Virginia, while the equipment will be delivered and used in Asheville, North Carolina.

General Info

VA to procure Dentsply Axeos Implant Solution via competitive solicitation August 3, 2026, with proposals due August 10, 2026.

Agency

Department Of Veterans Affairs → 246-NETWORK Contracting Office 6 (36C246)View Agency

NAICS

339114 - Dental Equipment and Supplies ManufacturingView NAICS

Place of Performance

Asheville VAMC, Asheville, NC, 28805, USA

Set-Aside

NONE

Documents

(1)

36C24626Q0807_1.docx

DOCX

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhasePresolicitation
Posted

Presolicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Veterans Affairs → 246-NETWORK Contracting Office 6 (36C246)
Contacts1 person available
OfficeHAMPTON, VA, 23667, USA
Organization / Agency
Department Of Veterans Affairs → 246-NETWORK Contracting Office 6 (36C246)
View Agency Profile
Office AddressHAMPTON, VA, 23667, USA
Contacts
Zanona PickettContracting Officer
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
This is a Pre-solicitation notice. This Pre-solicitation notice is not a request for formal proposals or quotes.  Solicitation, 36C24626Q0807, will be issued on or about August 3, 2026.  The Department of Veterans Affairs has a requirement for Brand Name Only Dentsply Axeos Implant Solution Panoramic for the Asheville VA Medical Center, Asheville, North Carolina.  
This acquisition is Full and Open Competition.  The applicable NAICS Code is 339114 with a size standard of 750 Employees.  All correspondence and responses shall be via e-mail to zanona.pickett@va.gov. Telephone requests for information or questions will NOT be accepted.       Offerors are responsible for downloading all documents including amendments from Contracting Opportunities at sam.gov website without further notification from the Contracting Officer. 

Similar Contracts

Same NAICS industry code

NAICS: 339114
New
DIBBS
DENTAL UNIGRIP SCRE
Solicitation # SPE2DH-26-T-5743
The contract pertains to the procurement of two Dental Unigrip Screwdrivers, each 25mm in length, designed for aesthetic dental applications and identified by the NSN 6520-01-518-1009. The solicitation number is SPE2DH-26-T-5743, with a response deadline of August 10, 2026, and a required delivery within 20 days of award. Bidders must specify the source and part number being supplied, and all supplies must comply with DLA packaging requirements and the removal of government identification from non-accepted items. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Covered defense information provisions apply, and the items are to be delivered to Newport, Rhode Island, under the oversight of the Department of Defense’s Medical Supply Chain FSH. Point of contact is Tina Vu, reachable via email and phone provided.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 8 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339114
New
DIBBS
SLEEVE, CURING LI T
Solicitation # SPE2DH-26-T-5740
The contract is for the procurement of 10 packages of disposable barrier sleeves designed to fit directly over the Valo Grand curing light used in dental applications. Each package contains 100 sleeves, totaling 1,000 units, and they are intended to prevent the buildup of germs and bacteria by acting as a single-use protective barrier. The product is identified by the NSN/Part Number 6520-01-730-0057 and is being procured under solicitation SPE2DH-26-T-5740, with a response deadline of August 10, 2026, and a required delivery within 20 days after award. The solicitation incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, and the supplier must specify the source and part number being offered. Packaging must comply with DLA standards, and government identification must be removed from non-accepted supplies. Covered defense information may apply, and the contract falls under NAICS code 339114. Delivery is to Peterson AFB, Colorado, with point of contact Tina Vu at the Defense Logistics Agency.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 8 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339114
New
DIBBS
GLASS IONOMER RESTORAT
Solicitation # SPE2DH-26-T-5742
The contract is for the procurement of 2 packages of GC Fuji Triage Capsule, a pink glass ionomer restorative dental material, with each package containing 50 capsules. The item is identified by NSN 6520-01-655-3423 and has a strict 36-month non-extendable shelf life per RS020 requirements. Packaging must conform to DLA standards and hazardous materials regulations including SPE2DH-26-T-5742, 49 CFR, and ICAO Technical Instructions. A current Material Safety Data Sheet (MSDS) is mandatory and must accompany each shipment, submitted electronically to DLA.MSDS@DLA.MIL along with the required cover sheet. The item is subject to hazardous communication standards and requires removal of government identification from non-accepted supplies. The solicitation number is SPE2DH-26-T-5742, issued under the NAICS code 339114 by the Department of Defense’s Medical Supply Chain FSH, with a response deadline of August 10, 2026, and delivery required within five days of award to Suffolk, Virginia, 23435-5000. Point of contact is Tina Vu, reachable via email and phone.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 8 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339114
New
DIBBS
Packaging & Kitting Services for Medical DevicesThe contract involves providing secondary packaging, sterilization validation support, kitting, barcoding, and preservation services for medical trays in accordance with military packaging and marking standards. These activities are critical to ensuring that medical devices meet stringent defense and operational requirements for readiness, safety, and traceability across the supply chain. The work encompasses the full lifecycle of package preparation, from assembly and labeling to environmental protection and compliance with federal specifications for military use. The opportunity is structured as a subcontract under the Department of Defense’s Medical Supply Chain MD Surg FSF and is classified under NAICS code 339114, which pertains to medical equipment and supplies manufacturing. The solicitation was posted on August 2, 2026, with a response deadline of August 10, 2026, and is accessible through the DIBBS platform. While specific locations and points of contact are not provided, the place of performance is expected to align with defense logistics requirements, and all deliverables must adhere strictly to authorized military packaging protocols to ensure interoperability and compliance with established defense standards.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 339114
New
DIBBS
Emergency Dental Preservation Fluid SupplyThe contract specifies the supply of six units of Save-a-Tooth pH Balanced Cell Culture Fluid, a medical-grade product designed for emergency preservation of avulsed teeth by maintaining cell viability during transport. The fluid must meet stringent specifications to ensure optimal physiological conditions for periodontal ligament cells, critical for successful reimplantation. This is a subcontract under the Department of Defense’s Medical Supply Chain FSH, with the NAICS code 339114 indicating classification within medical equipment and supplies manufacturing. The solicitation was posted on August 2, 2026, and responses are due by August 10, 2026, with no set-aside provisions applied. Performance location and point of contact details are not specified, but the procurement is accessible via the DLA DIBBS platform under reference number SPE2DH26T5712. The requirement reflects a targeted need for reliable, clinically validated emergency dental preservation solutions within military medical operations.
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 339114
New
DIBBS
Medical Device Manufacturing & Supply (GC Cavity Conditioner)The contract requires the manufacture, packaging, labeling, and delivery of 6gm units of GC Cavity Conditioner, an FDA Class II medical device, strictly adhering to Department of Defense technical specifications, shelf-life standards, and military packaging requirements. All production must ensure full compliance with regulatory and operational mandates for use in military medical applications, with quality control measures embedded throughout every stage of the process. The product must meet exacting durability and sterilization criteria suitable for storage and deployment in field conditions. Performance is to be carried out at or from Suffolk, Virginia, with a response deadline of August 10, 2026, and the contract is solicited as a subcontract under NAICS code 339114, which classifies it within the medical appliance and equipment manufacturing sector. The awarding agency is the Department of Defense through the Medical Supply Chain FSH, and delivery must align with military logistics protocols for timely, secure, and traceable distribution to designated endpoints. All units must be labeled and packaged to sustain integrity over the designated shelf life under expected environmental conditions without degradation or contamination.
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 339114
New
DIBBS
Supply of Pre-Sterilized Dental K-Files for Military Medical UseThe contract mandates the supply of pre-sterilized, individually packaged dental K-files with specific technical specifications: size 06, length 31mm, equipped with pink handles and fabricated from square stainless steel blanks featuring non-cutting tips, designed for use in root canal procedures. Each package must contain six files, and a total of four such packages must be delivered to the USS John F. Kennedy (CVN-79) located in Suffolk, Virginia, with a strict delivery window of no more than five days following contract award. This procurement is classified as a subcontract under NAICS code 339114 and is being managed by the Department of Defense through its Medical Supply Chain FSH office, with the requirement intended to support military medical operations aboard the naval vessel. The solicitation was posted on August 2, 2026, and responses are due by August 10, 2026, with the place of performance clearly identified by the ZIP code 23435-5000.
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 339114
New
DIBBS
Medical Sensor/Pump Component ManufacturingThe contract solicits the manufacture and delivery of a specialized repair part for an intravenous infusion pump sensor designed to detect air bubbles in fluid and tubing, identified by NSN 6515016830188. This component must fully comply with stringent regulatory standards set by the Food and Drug Administration and the Defense Logistics Agency, ensuring safety, reliability, and interoperability within military and medical supply systems. The part is critical for maintaining the operational integrity of infusion devices used in clinical environments under Defense Department purview. The opportunity is structured as a subcontract with a response deadline of August 10, 2026, issued under NAICS code 339114 for medical equipment and supplies manufacturing. Performance is required at Scott Air Force Base, with the work falling under the purview of the Medical Supply Chain MD Surg FSF within the Department of Defense. Interested parties must ensure adherence to all technical specifications and quality controls, as failure to meet FDA and DLA requirements will result in rejection. The contract is accessible through the DIBBS platform, with no specific set-aside provisions indicated, meaning it remains open to qualified general contractors.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 339114
New
DIBBS
Small Business Subcontracting ParticipationSmall, Women-Owned, Service-Disabled Veteran-Owned, HUBZone, and Economically Disadvantaged Women-Owned small businesses are invited to participate as suppliers in the medical supply chain through a subcontracting opportunity issued by the Department of Defense under the Medical Supply Chain FSH. This opportunity leverages socioeconomic designations to provide eligible firms with access to federal contracting advantages, aiming to increase diversity and inclusion within critical medical procurement networks. The NAICS code 339114 indicates the focus is on surgical and medical instrument manufacturing, and the place of performance is designated as APO with ZIP code 09094-3219, suggesting logistics and distribution support for military medical needs. The solicitation is open for responses from August 2, 2026, through August 10, 2026, and is structured as a subcontracting vehicle rather than a direct contract, meaning participants will supply goods or services to prime contractors fulfilling the government’s medical supply requirements. There is no specified set-aside type or description, but eligibility is contingent upon the firm’s certified status under one of the designated socioeconomic categories. Participation requires registration and response through the DIBBS portal using the provided link, and interested firms must ensure their certifications are current and validated to qualify for consideration under this initiative.
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 339114
New
DIBBS
Non-Latex Rubber Dam SupplyThe contract calls for the supply of 15 sheets of non-latex rubber dam, each measuring 6x6 inches in size, in teal green color with regular medium thickness, identified by NSN 6520-01-717-7806. The product must fully comply with DLA specifications and is to be packaged as a single unit of issue to ensure standardization and ease of distribution. This requirement is part of a subcontract under the procurement category NAICS code 339114, which pertains to medical and surgical equipment manufacturing. The solicitation was posted on August 2, 2026, with a response deadline of August 10, 2026, and the place of performance is designated as APO, ZIP 09094-3219, indicating delivery to a military postal location. The acquiring agency is the Medical Supply Chain FSH under the Department of Defense, highlighting the critical nature of the item for medical use in military or defense-related healthcare settings. The contract is accessible via the DIBBS platform for potential suppliers to review and submit proposals, though no point of contact or specific set-aside details are provided.
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 339114
New
DIBBS
FILE, ENDODONTIC, HAND
Solicitation # SPE2DH-26-T-5706
These endodontic hand files are precision dental instruments with a square cross-sectional design, optimized for root canal cleaning, unclogging, and shaping procedures. Manufactured from premium stainless steel, they are engineered for durability, resistance to fracture, and high cutting efficiency, ensuring reliable performance during clinical use. The instruments feature color-coded plastic handles with grooves and an ergonomic shape to enhance tactile feedback and provide a secure, comfortable grip for dental professionals. Each unit is packaged as a set of six, with the specified NSN 6520-01-718-4102 and a quantity of four packages required under purchase request 7017638333. A shelf-life restriction of 12 months applies and is non-extendable, with packaging and supply requirements governed by DLA standards including the removal of government identification from non-accepted items. The solicitation, issued by the Department of Defense under contract SPE2DH-26-T-5706, mandates supplier information including source and part number, with bids due by August 10, 2026, and delivery required within five days of award to Suffolk, Virginia. The items are subject to defense information protocols and technical quality standards as referenced in the DLA Master List.
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 339114
New
DIBBS
RUBBER DAM
Solicitation # SPE2DH-26-T-5723
The contract specifies the procurement of 15 sheets of a non-latex rubber dam measuring 6 x 6 inches, identified by the NSN 6520-01-717-7806, with a teal green color and regular medium thickness, packaged as a single unit of issue. The item is intended for medical use and must comply with technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the scale of the acquisition. Packaging must meet DLA procurement standards, and any non-accepted supplies must have government identification removed prior to return. Bidders are required to clearly state the source and part number being submitted. The solicitation, issued under SPE2DH-26-T-5723 on August 2, 2026, with a response deadline of August 10, 2026, is managed by the Department of Defense’s Medical Supply Chain FSH, with performance delivery to APO 09094-3219 within 20 days of award. Primary point of contact is Tina Vu via email and phone provided. Covered defense information may apply, and the NAICS code 339114 denotes classification under dental and orthopedic appliances manufacturing.
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Veterans Affairs → 246-NETWORK Contracting Office 6 (36C246)

Same awarding agency

NAICS: 325120
New
Federal
6835-- MEDICAL GAS AND CYLINDER RENTAL, Durham VAMC
Solicitation # 36C24626Q0881
The U.S. Department of Veterans Affairs is conducting market research through a Sources Sought Notice to identify potential vendors capable of supplying medical gases and cylinder rental services at the Durham VA Medical Center in North Carolina. The required medical gases include Medical Air USP, Oxygen USP, Carbon Dioxide USP, Nitrogen NF, Nitrous Oxide USP, Helium USP, Liquid Nitrogen, Compressed Air, and special medical gas mixtures. This notice is solely for gathering market information and does not constitute a solicitation, request for proposal, or binding contract opportunity. The Government reserves the right to modify the Performance Work Statement before issuing any future solicitation, and responses to this notice will not be accepted as offers. All responses will be considered regardless of business size, but small businesses must be certified in the SBA’s Small Business Search and/or Dynamic Small Business Search databases to support potential set-asides under 38 U.S.C. 8127 and 8128 for Service-Disabled Veteran Owned Small Businesses and Veteran Owned Small Businesses, should a solicitation be issued and the rule of two be met. Responses must be submitted via email to Monique Cordero, Contract Specialist at the Network Contracting Office 6, by the deadline of August 17, 2026, at 10:00 a.m. Eastern Standard Time. Submissions must include the company name, SAM UEI number, point of contact details, small business or socioeconomic status, relevant certifications or licenses, a capabilities statement, and the physical address of the operating office. The NAICS code associated with this requirement is 325120, Industrial Gas Manufacturing. The place of performance is Durham, North Carolina, while the contracting office is based in Hampton, Virginia. If the Government determines a solicitation is warranted based on market research, it will be posted on SAM.gov. No bids or proposals are being solicited at this time, and all information provided may be used to shape future procurement decisions.
Industrial Gas Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339112
New
Federal
Supply of Medical Vacuum Pump System for Radiation TherapyThe contract entails the supply and delivery of a Bodyfix Vacuum Pump P3 or an equivalent medical-grade vacuum pump system, along with accompanying medical tubing, specifically for use in patient immobilization during radiation therapy and radiosurgery procedures at the Durham VA Medical Center. The equipment is critical for ensuring precise patient positioning and stability during high-accuracy treatments, directly supporting clinical outcomes in oncology care. The system must meet all applicable medical standards and be compatible with existing radiation therapy infrastructure at the facility. This subcontract was posted on July 31, 2026, with responses due by August 15, 2026, and falls under NAICS code 339112 for medical equipment manufacturing. The acquisition is managed by the 246-NETWORK Contracting Office 6 under the Department of Veterans Affairs, with performance located exclusively in Durham, North Carolina, at the specified ZIP code 27705. The contract does not specify a set-aside classification and lacks a designated point of contact, implying that submissions should follow standard federal procurement guidance for subcontract opportunities. All equipment must be delivered, installed, and validated to ensure seamless integration into the medical center's radiation therapy workflow.
Surgical and Medical Instrument Manufacturing

POSTED

4 days ago

DEADLINE

in 12 days
View Details
NAICS: 541512
New
Federal
Windows 11 Enterprise Upgrade Deployment ServicesThe contract seeks a contractor to plan, execute, and support the enterprise-wide upgrade of all systems at the Fayetteville VA Medical Center from Windows 10 to Windows 11, utilizing automated tools such as Scripto Pro or equivalent solutions. Key responsibilities include system imaging, comprehensive compatibility testing to ensure hardware and software integrity, secure data migration from legacy systems, and ongoing post-deployment support to resolve issues and maintain operational continuity. The work must be coordinated to minimize disruption to critical medical services and comply with all federal IT and data security standards applicable to VA facilities. This is a subcontract opportunity under NAICS code 541512, awarded by the Department of Veterans Affairs through the 246-NETWORK Contracting Office 6. The solicitation was posted on July 31, 2026, with responses due by August 14, 2026. The performance location is the Fayetteville VA Medical Center, and the contractor is expected to deliver a fully managed upgrade project with documented procedures, testing results, and support deliverables to ensure a seamless transition. No set-aside preferences are indicated, and the contractor must possess demonstrated experience in large-scale enterprise Windows deployments within federal healthcare environments.
Computer Systems Design Services

POSTED

4 days ago

DEADLINE

in 10 days
View Details
NAICS: 332311
New
Federal
Snow Plow Capability IntegrationThe contract seeks the supply and integration of a snow plow attachment or front-mounting system designed to repurpose an existing sprayer vehicle for seasonal snow removal operations. This includes all necessary structural framing and hydraulic components required to convert the sprayer into a functional snow removal platform, ensuring seamless operation and compatibility with the current equipment. The solution must be robust, reliable, and engineered to withstand harsh winter conditions while maintaining the integrity of the original vehicle systems. This is a small business set-aside subcontract under the SBA program, specifically designated for total small business participation, with a NAICS code of 332311 indicating manufacturing of other commercial and service industry machinery. The solicitation was posted on July 31, 2026, and responses are due by August 7, 2026. The contracting office is the 246-NETWORK Contracting Office 6 under the Department of Veterans Affairs, and performance will occur at an unspecified location. All offerors must be certified small businesses eligible under the set-aside criteria, and the contract is expected to support critical infrastructure maintenance during winter months.
Prefabricated Metal Building and Component Manufacturing

POSTED

4 days ago

DEADLINE

in 4 days
View Details
NAICS: 336340
New
Federal
Hillside Stability Package and Hill Assist Technology IntegrationThe contract entails the supply and integration of a hillside stability system enhanced with hill assist technology designed to ensure safe and reliable operation on sloped and uneven terrain. This includes the delivery of both electronic and mechanical components that work in tandem to provide enhanced control, traction, and stability for vehicles or equipment operating in challenging topographical conditions. The solution must be fully integrated to meet operational requirements without compromising existing systems, with emphasis on durability, precision, and real-time performance under adverse conditions. This is a total small business set-aside subcontract under the NAICS code 336340, meaning only small business concerns are eligible to respond. The solicitation was posted on July 31, 2026, with a firm deadline for responses on August 7, 2026, at 2:00 PM. The contracting office is the 246-NETWORK Contracting Office 6 under the Department of Veterans Affairs, and the place of performance details are not specified. Interested parties must ensure compliance with all small business certification requirements and submit proposals prior to the deadline, as this opportunity is exclusively reserved for small businesses pursuant to FAR 19.5.
Motor Vehicle Brake System Manufacturing

POSTED

4 days ago

DEADLINE

in 4 days
View Details
NAICS: 333111
New
Federal
Supply of Foam Marker SystemThe contract is for the supply of a foam marking system designed to visually delineate areas that have been sprayed during chemical application operations, ensuring precise coverage and preventing unnecessary overlap. This system is critical for operational efficiency and accuracy in environments where controlled application of chemicals is required, and it must meet technical specifications that ensure durability, visibility, and compatibility with existing application equipment. The requirement is issued as a subcontract under a Total Small Business Set-Aside, exclusively open to small businesses as defined by the SBA, with the NAICS code 333111 indicating the procurement is for tractor and heavy machinery manufacturing. All bids must be submitted by the deadline of August 7, 2026, and the solicitation was posted on July 31, 2026. The contracting office is the 246-NETWORK Contracting Office 6 under the Department of Veterans Affairs, though no specific place of performance or point of contact details have been provided.
Farm Machinery and Equipment Manufacturing

POSTED

4 days ago

DEADLINE

in 4 days
View Details
NAICS: 811310
New
Federal
Supply and Installation of LED Light SystemThe contract seeks the supply and integration of a high-intensity LED lighting system designed to enable safe operation in low-light conditions, with all mounting and wiring configured to seamlessly interface with the existing electrical architecture of the sprayer equipment. The requirement emphasizes compatibility, durability, and performance under operational constraints, ensuring the lighting system enhances visibility without compromising the functionality or safety of the sprayer. This is a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, with the NAICS code 811310 relating to commercial and industrial machinery and equipment repair and maintenance. The solicitation was posted on July 31, 2026, with responses due by August 7, 2026, and is managed by the Department of Veterans Affairs through the 246-NETWORK Contracting Office 6. The place of performance and specific location details are not specified, but the work must be executed in alignment with the operational needs of the agency. The contract falls under the broader scope of support services for federal equipment maintenance and modernization, and participation is limited to small business concerns meeting SBA size standards, ensuring opportunity for qualified small contractors within the defense and federal support services sector.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

4 days ago

DEADLINE

in 4 days
View Details
NAICS: 332999
New
Federal
Supply of 7-Gallon Induction Tank SystemThe contract seeks the supply of a 7-gallon chemical induction mixing tank designed to be fully compatible with an existing sprayer system, constructed from corrosion-resistant materials to ensure durability under harsh chemical exposure. The requirement is issued as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, with the NAICS code 332999 indicating classification under Other Miscellaneous Metal Product Manufacturing. The solicitation was posted on July 31, 2026, and responses are due by August 7, 2026, at 2:00 PM Eastern Time. The contracting office responsible is the 246-NETWORK Contracting Office 6, operating under the Department of Veterans Affairs, though no specific place of performance or point of contact details are provided in the data. The contract is accessible through the SAM.gov platform for eligible small business vendors seeking to submit proposals.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

4 days ago

DEADLINE

in 4 days
View Details
NAICS: 333111
New
Federal
Supply of Steel Green Sprayer with Integrated Opti-Rate SystemThe contract seeks the supply of a commercial-grade steel sprayer equipped with the Opti-Rate System, a precision application technology designed to enhance the efficiency and accuracy of fertilizer and pesticide application at the Asheville VA Medical Center. The equipment must meet high durability and performance standards suitable for institutional grounds maintenance, ensuring consistent chemical delivery while minimizing waste and environmental impact. The procurement is structured as a subcontract under a Total Small Business Set-Aside, as defined by the SBA and FAR 19.5, meaning only small businesses are eligible to respond. The North American Industry Classification System code 333111 indicates the focus is on agricultural, construction, and mining machinery manufacturing, aligning the supplier’s capabilities with specialized equipment production. The solicitation was posted on July 31, 2026, with a response deadline of August 7, 2026, at 2:00 PM Eastern Time. The contract falls under the Department of Veterans Affairs, specifically managed by the 246-NETWORK Contracting Office 6 (36C246), and the place of performance is tied to the Asheville VA Medical Center. Although specific location details are not provided, the equipment must be delivered and operational at the facility to support its landscaping and groundskeeping needs. The acquisition emphasizes small business participation, requiring proposers to demonstrate compliance with SBA size standards and the capability to deliver a fully integrated, precision-application sprayer system that meets the VA’s operational requirements without reliance on larger contractors.
Farm Machinery and Equipment Manufacturing

POSTED

4 days ago

DEADLINE

in 4 days
View Details
NAICS: 423450
New
Federal
Medical Equipment and Casework SupplierThe contract is for the supply of medical furniture and equipment including exam tables, patient chairs, instrument cabinets, and sterilization units to support clinical spaces, all under a subcontract classified as a Service-Disabled Veteran-Owned Small Business Set-Aside. The solicitation was posted on July 31, 2026, with a response deadline of August 26, 2026, and is managed by the Department of Veterans Affairs through the 246-NETWORK Contracting Office 6. The NAICS code 423450 indicates the procurement is for medical and dental equipment and supplies merchant wholesalers. The work is intended to equip VA clinical facilities with essential furnishings and equipment to maintain high standards of patient care, and the set-aside ensures priority consideration for businesses owned and operated by service-disabled veterans. All items must meet applicable medical and safety standards for use in healthcare environments.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

4 days ago

DEADLINE

in 23 days
View Details
NAICS: 238390
New
Federal
Flooring, Ceiling, and Wall FinishesThe contract titled Flooring, Ceiling, and Wall Finishes is a subcontract issued by the Department of Veterans Affairs through the 246-NETWORK Contracting Office 6 with a NAICS code of 238390, specifically set aside for Service-Disabled Veteran-Owned Small Businesses. It requires the installation of infection-control-compliant finishes including resilient flooring, ceiling tiles, wall protection systems, and specialized paint in clinical areas, ensuring compliance with stringent healthcare sanitation and safety standards. The solicitation was posted on July 31, 2026, with a response deadline of August 26, 2026, at 2:00 PM, allowing eligible SDVOSBs to submit proposals for this specialized architectural finish work. The work must be performed in clinical environments where contamination control is critical, demanding materials and installation methods that resist microbial growth, are easily cleanable, and withstand heavy use without degradation. Although the exact location of performance is not specified, the scope is confined to areas within VA facilities requiring high-level infection control measures. The subcontract underscores the VA’s commitment to both healthcare infrastructure integrity and supporting veteran-owned small businesses by reserving this opportunity under FAR 19.14 regulations, reinforcing dual objectives of clinical safety and economic inclusion.
Other Building Finishing Contractors

POSTED

4 days ago

DEADLINE

in 23 days
View Details
NAICS: 238290
New
Federal
Fire Protection and Life Safety SystemsThe contract entails the upgrade or modification of fire protection and life safety systems including fire sprinklers, smoke detectors, fire-rated partitions, and egress components to ensure full compliance with NFPA standards and Veterans Affairs safety codes. Work under this subcontract requires precise technical execution to meet stringent federal safety requirements, with all systems being updated or installed to maintain operational reliability and regulatory alignment. The scope covers both retrofitting existing infrastructure and implementing new components as necessary to achieve full code compliance across all applicable facilities. This solicitation is designated as a Service-Disabled Veteran-Owned Small Business (SDVOSB) Set-Aside under FAR 19.14, limiting eligibility to qualifying small businesses owned and controlled by service-disabled veterans. The North American Industry Classification System code is 238290, indicating specialized construction services related to fire protection systems. The contract is issued by the Department of Veterans Affairs through the 246-NETWORK Contracting Office 6, with responses due by August 26, 2026, and the opportunity posted on July 31, 2026. All work must be performed in accordance with federal guidelines, and the place of performance details are not specified, suggesting potential multi-site implementation across VA-managed facilities.
Other Building Equipment Contractors

POSTED

4 days ago

DEADLINE

in 23 days
View Details