This Sources Sought opportunity from Department Of Veterans Affairs was posted on June 21, 2021. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

6515--Orthotics Soft Goods and Prosthetic Products FY21

Closed

36C79121Q0004Federal

Submission Closed07/06/2021, 10:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 339113

New

DIBBS

Supply of Oxygen Reservoir KitsThis subcontract involves the supply of two 3-liter oxygen reservoir kits designed for prime contractors supporting Department of Defense DLA Troop Support Medical Supply Chain contracts. The kits must be constructed from medical grade materials and be specifically compatible with the EMV Plus volume ventilator system. All deliverables must adhere to Medical Marking Standard No. 1 for packaging and marking requirements. The opportunity is categorized under NAICS code 339113 and is managed by the Medical Supply Chain MD Surg FSF.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Supply of Large Vascular Shunt (NSN 6515-01-468-7929)This subcontract, issued by the Department of Defense Medical Supply Chain, requires the delivery of one Large Vascular Shunt identified by NSN 6515-01-468-7929. The contract is designated under NAICS code 339113 and is intended for prime contractors fulfilling DLA supply contracts, with the place of performance located at FPO 96616. The supplier must adhere to strict technical and regulatory standards, including packaging per ASTM D3951 and marking and preservation according to MIL-STD-129 and MIL-STD-2073-1E. Additionally, the provider must ensure full compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012. The response deadline for this requirement is November 4, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Solicitation # SPE7M4-27-T-1454

Solicitation SPE7M4-27-T-1454 is a request for quotations issued by the DLA Weapons Support Fluid Handling Division for the procurement of 17 safety relief valves, identified by NSN 4820-01-385-0125. These components are designated as critical application items associated with Northrop Grumman Systems Corp and must adhere to top drawing DAA3222A703-003 and assembly drawing DAA3222A702-001. A key performance requirement is the verification of correct cracking pressure per standard GN4, which includes the specific installation of shear ring DAA3222D715-003 or DAA3222D705-003. The delivery schedule specifies a period of 699 days after order, with a required delivery date of July 12, 2029, shipped FOB Origin to DLA Distribution Depot Hill AFB, Utah. This procurement carries stringent security and compliance mandates. It requires Cybersecurity Maturity Model Certification (CMMC) Level 2 and adherence to DFARS 252.204-7012 for safeguarding covered defense information. Because the item is a restricted source item, it requires government design control activity engineering source approval and is subject to a Boeing Rights Guard License Agreement, necessitating strict data non-disclosure and destruction. Additionally, the technical data is subject to ITAR or EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification. Packaging must comply with ASTM D3951 and MIL-STD-129, while all payment requests must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of NIV Associated ConsumablesThis subcontract focuses on the supply of Non-Invasive Ventilation associated consumables for prime contractors working on projects for the Belfast Health & Social Care Trust. The scope of work involves the ongoing delivery of recurring disposable and replaceable components, including filters, tubing, masks, and other patient-specific consumables. All provided items must adhere to strict sterile packaging standards and be manufactured from medical grade materials. The contractor is responsible for the direct delivery of these essential medical supplies to either clinics or individual patients. This procurement opportunity is categorized under NAICS code 339113, with a response deadline set for November 30, 2026.

Belfast Health & Social Care Trust

POSTED

DEADLINE

Supply of Pressure Sensitive FME Tape (NSN 7510LLS053498)This small business set-aside subcontract through DLA Maritime Puget Sound involves the supply of 800 rolls of pressure-sensitive FME tape, identified by NSN 7510LLS053498. The required material is a cotton or plastic coated silver tape measuring 3 inches by 60 yards with a thickness of 13mm, designed to meet specific heat and cold resistance standards. Performance will take place in Bremerton. The contractor must maintain QPL status and ensure full compliance with C542 mercury exclusion standards. All items must be packaged according to MIL-STD-130 and MIL-STD-129 regulations. Final delivery requires the 800 rolls of tape accompanied by a Certificate of Compliance as specified by DI-MISC-81356A.

DLA Maritime - Puget Sound

POSTED

DEADLINE

Supply and Fabrication of Dispersive MirrorThis subcontract involves the fabrication and supply of a high-precision dispersive mirror for prime contractors working on Department of Energy projects at the SLAC National Accelerator Laboratory in Menlo Park. The contractor is responsible for manufacturing one new, defect-free mirror using high-precision optical glass and specialized coatings, strictly adhering to provided technical design engineering documentation. The agreement requires strict regulatory compliance, specifically certifying adherence to ITAR USML regulations and the 10 CFR 110 Nuclear Trigger List. Classified under NAICS code 339113, the project ensures the delivery of a genuine component meeting all specified technical and legal standards for use within the national laboratory.

Slac National Accel Labor -Doe Contractor

POSTED

DEADLINE

Trauma Manikin Supply & SupportThis small business set-aside subcontract, managed by the Department of Defense under the W7NC Uspfo Activity Me Arng, involves the supply and support of weighted trauma manikins for US Army New England CERFP EXEVAL projects. The contractor is responsible for providing 20 weighted manikins with a distribution across adult, child, and infant weights, all of which must be delivered and positioned at the designated venue. The scope of work includes applying detailed, scenario-specific moulage such as chemical burns, abrasions, compression wounds, and general trauma. Additionally, the contractor is tasked with managing the placement and rotation of these manikins to align with the specific pacing of the exercise.

W7NC Uspfo Activity Me Arng

POSTED

DEADLINE

Overhead Track System

Solicitation # SRC0000042426

The Ohio State School for the Blind, through the Early Learning Admin Elc, is soliciting quotes from Minority Business Enterprise (MBE) dealers for the procurement and installation of a Solo-Step Mobility Device Track System. This turnkey project is for Activity Room 102 and requires a 12x12 track layout featuring full and half 6 foot curves, a 12 inch by 12 inch oval with a switch system, trolleys, a 10 foot 4 inch ceiling height lanyard, and a small universal harness. The total estimated contract value is 27,700 dollars, and bidders must provide pricing at or below the provided quote. Eligible MBE suppliers, including those utilizing existing state contracts, must submit their responses by October 29, 2026. Site visits are available from October 14th to October 28th and must be scheduled with Daric Scott at [phone hidden]. Selection will be awarded to the lowest responsive and responsible MBE quote. The installation must adhere to specific anchorage details and general safety regulations, with the final product being delivered to the facility in Columbus, Ohio.

Osb501000 Early Learning Admin Elc

POSTED

DEADLINE

Neurosurgical Burrs and Drill Bit SupplyThis subcontract agreement involves the supply of specialized neurosurgical cutting tools and drill bits for prime contractors working on procurement projects at SUNY Upstate Medical University. The scope of work includes providing diamond, carbide, fluted, and saber shank burrs that are compatible with Elite Core TPS and Midas Rex Zimmer Ultrapower TPS systems. All delivered equipment must meet strict technical dimensions to ensure surgical precision and safety. To qualify, providers must be authorized to sell Premier contract products or be capable of providing clinical equivalents along with the necessary trial equipment. The solicitation was posted on October 30, 2026, with a response deadline of November 23, 2026, falling under NAICS code 339113 for the State University of New York.

State University of New York (SUNY)

POSTED

DEADLINE

Emergency Generator Parts and Consumables SupplierThis subcontract agreement establishes a partnership for the supply of OEM replacement parts and consumables essential for the maintenance of emergency generators at the Maryland Department of Health Springfield Hospital Center. The scope of work includes the provision of specialized components such as contacts, fuses, timers, leads, lubricants, and generator brushes, ensuring all materials are specifically designed for the on-site equipment. The supplier is required to deliver all replacement parts along with the corresponding manufacturer invoices while strictly adhering to sustainable packaging guidelines that prohibit the use of polystyrene and heavy metals. This procurement effort falls under NAICS code 339113 and is managed through the Maryland General Administration for the Springfield Hospital Center.

09001-general Administration - Springfield Hospital Center

POSTED

DEADLINE

Medical Device Supply (NSN 6530016456923)This subcontract involves the manufacture and supply of specific medical devices, identified by NSN 6530016456923, for prime contractors supporting DLA Medical contracts. The required devices must measure 6 to 7 inches in length and 1 to 2 inches in diameter, featuring a lift-off cover and a securable cap. All items must adhere to Medical Marking Standard No. 1 and maintain strict compliance with FDA Regulation 880.5570 Class II. Managed by the Department of Defense under the Medical Supply Chain FSH, the contract falls under NAICS code 339113. Performance of the contract will take place in Fort Bliss, Texas. The solicitation was posted on October 29, 2026, with a response deadline set for November 5, 2026.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Disposable Plastic Inhaler Tube SupplierThis subcontract involves the manufacture and supply of clear, non-sterile, disposable plastic inhaler tubes for prime contractors supporting Department of Defense Medical Supply Chain projects. The required tubing must be 84 inches in length with force-fit flared tips, individually wrapped according to MIL-STD-2073-1E and Special Packaging Instructions MPPWN00001. Finished products are to be delivered in labeled packages of 50 tubes to the Naval Medical Readiness Logistics Command. Compliance is mandatory regarding the Buy American Act and DFARS 252.204-7012 cybersecurity standards. The performance of the contract is centered in Williamsburg, Virginia, under NAICS code 339113. Interested parties must adhere to the response deadline of November 4, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 5 days

General Info

Agency

Department Of Veterans Affairs → Commodities & Services Acquisition Service (36C791)

NAICS

339113 - Surgical Appliance and Supplies Manufacturing

Place of Performance

Department of Veterans Affairs Commodities & Services Acquisition Svc (003B6E) 555 Corporate Circle, Golden, CO, 80401-5621, USA

Set-Aside

NONE

Documents

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedJun 21

Sources Sought

Response DeadlineJul 6

Deadline has passed

Submission Closed

07/06/2021, 10:30:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Veterans Affairs → Commodities & Services Acquisition Service (36C791)

Contacts1 person available

OfficeDENVER, CO, 80225, USA

Organization / AgencyDepartment Of Veterans Affairs → Commodities & Services Acquisition Service (36C791)

Office AddressDENVER, CO, 80225, USA

Contacts

Brian D ReddingContract Specialist

contact@example.gov

+1 (555) 000-0000

Full Description

PROJECT: Orthotic Soft goods/Prosthetics BACKGROUND: The Department of Veterans Affairs (VA) Commodities and Services Acquisition Service (CSAS), hereinafter called "the Agency", is conducting market research and seeking information and comment through this Request for Information (RFI) from all interested vendors regarding the availability of orthotic soft good and prosthetic commercial item(s) described in this document. Vendors should note that responses to this RFI may in part be utilized by the Agency in a determination whether or not to set aside particularly listed Agency items or item exclusively for participation by various small business socio-economic concerns. A vendor may choose to provide a RFI response to one or more of the listed items. The term vendor refers to those members of industry providing a response to this RFI. RFI responses must be accurate and must be made individually to each item. This is a Request for Information only. It is not an invitation to submit any offers or bids. This RFI is issued solely for information and planning purposes only and does not constitute a solicitation. Do not submit any offers or bids in response to this (RFI). Responses to this RFI are not offers and cannot be accepted by the Agency to form a binding contract. The Agency will not award a contract on the basis of this RFI nor will it pay for information. Please see attached Draft Minimum Technical Requirements for the following products: 1. Forefoot Off-Loading Shoe (A9283) 2. Transtibial Variable Compression Shrinker with Silver (L8440) 3. Suspension Sleeve (L5685) Questions / Information Requests: This information request is for commercially available products. Please address all questions listed below with your response. You may provide any information and comments that you believe would be useful to the Agency in its describing of the item and the associated minimum technical requirements. 1. What is your company name, address, and point of contact information? 2. Is your company a United States business? If not, identify the country? 3. Does your company offer a commercially available item (s) as listed above and described on the attached draft minimum technical requirements? Please list each product by name, to include its brand name. Provide an on-line link describing the product if available. 4. Is your company the actual manufacturer of the item (s), you listed above or is you re a company a distributor of the item? 5. If your company is not the manufacturer, who is, and where is the product manufactured? Provide online link if available. 6. Information Request: Submit a copy of your commercial retail pricing for the item. 7. Regarding the size of your company, is it more than 750 employees? 8. Is your company a Service-Disabled Veteran Owned Small Business (SDVOSB) as described by FAR Part 2? 9. Is your company a Veteran Owned Small business (VOSB) as described by FAR Part 2? 10. If your company is a (SDVOSB) or (VOSB), is it verified in the U.S. Department of Veteran Affairs Vendor Information Pages? See https://www.vip.vetbiz.gov/ 11. What is the socio-economic status (See FAR Parts 2 and 19 for definitions) of your company? 12. Has your company completed representations regarding its socioeconomic status on the https://www.sam.gov website? Responses: This RFI for Orthotic Soft Goods and Prosthetic products, is an RFI to collect market information for planning purposes. It does not reflect nor does it limit the amount of different items being procured. Responses must be submitted to Department of Veterans Affairs, Commodity Services and Acquisition Services (CSAS), on or before 4:30 PM Mountain Time on Tuesday, July 06, 2021. Incomplete responses may be excluded as market research of future solicitations. Please e-mail responses. Note, however, that our e-mail function is very limited as to the size of file that it can receive, approximately 5mb per e-mail. Please e-mail RFI responses to: contact@example.gov, and contact@example.gov . In the e-mail subject line please identify as an RFI response. Any questions must be e-mailed to Brian Redding and Susan Dela Cruz (see e-mails above) by 12:00 PM (noon) Mountain Time on Friday, June 25, 2021. E-mail communication must include the company name, address, point of contact name and title, e-mail address, and telephone number.