6515-- SYNTHES DISTAL FIBULA AND RADIUS SETS (Brand Name Only) This is not a request for quote

THIS IS NOT A SOLICITATION ANNOUNCEMENT. THIS IS A REQUEST FOR INFORMATION ONLY. This Request for Information (RFI) is intended for information and planning purposes only at this time; and shall not be construed as a solicitation or as an obligation on the part of the Department of Veterans Affairs. Because this is a Request for Information announcement, no evaluation letters and/or results will be issued to the respondents. This Sources Sought Notice is for market research purposes only and shall not be considered an Invitation for Bids, Request for Quotations, or a Request for Proposal. Do not submit a proposal or quote. This market research is issued for information and planning purposes only and does not constitute a solicitation nor does it restrict the Government as to the ultimate acquisition approach. Responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. Additionally, there is no obligation on the part of the Government to acquire any products or services described in this sources sought notice. You will not be entitled to payment for direct or indirect costs that you incur in responding to this Sources Sought Notice. Any contract that might be awarded based on information received or derived from this market research will be the outcome of a competitive process. Interested parties are responsible for adequately marking proprietary, restricted or competition sensitive information contained in their response. No solicitation exists. Therefore, do not request a copy of a solicitation. See instructions on page 10. Synthes Distal Fibula and Radius Instrument Set (Brand name only) INTRODUCTION/BACKGROUND: The Lebanon VA Medical Center has a brand name requirement for one (1) Synthes Distal Fibula Set and one (1) Synthes Radius Instrument set. MAJOR REQUIREMENTS: The Contractor/ Vendor must complete the following tasks to meet the needs of this acquisition: Draft Statement of Need Synthes Distal Fibula and Radius Instrument Set Background: The Lebanon VA Medical Center (LVAMC) has brand name requirement for one (1) Synthes Distal Fibula Set and one (1) Synthes Radius Instrument set to perform Surgical Ankle Trauma procedures. Scope of Work: The Synthes Distal Fibula and Radius Instrument Sets are needed to accommodate a Orthopedic Surgeon who will be repairing ankle trauma in the Operating Room. The Synthes Brand is required due to training and utilization of this type of instrument and implantation devices. No other brand will suffice due to the specific training and knowledge the surgeon has for this type of instruments/implants for this specialty surgery, as well as this item is needed to integrate with other Synthes instruments utilized for this surgery. Salient Characteristics of the Synthes Fibula Set: 01.112.077 1 2.7MM/3.5MM LCP DISTAL FIBULA PL INSTRUMENT AND IMPLANT SET 02.112.106 1 2.7MM/3.5MM LCP POSTLAT DISTAL FIBULA PLATE 3H/RIGHT/77MM 02.112.107 1 2.7MM/3.5MM LCP POSTLAT DISTAL FIBULA PLATE 3H/LEFT/77MM 02.112.108 1 2.7MM/3.5MM LCP POSTLAT DISTAL FIBULA PLATE 4H/RIGHT/90MM 02.112.109 1 2.7MM/3.5MM LCP POSTLAT DISTAL FIBULA PLATE 4H/LEFT/90MM 02.112.110 1 2.7MM/3.5MM LCP POSTLAT DISTAL FIBULA PLATE 5H/RIGHT/103MM 02.112.111 1 2.7MM/3.5MM LCP POSTLAT DISTAL FIBULA PLATE 5H/LEFT/103MM 02.112.112 1 2.7MM/3.5MM LCP POSTLAT DISTAL FIBULA PLATE 6H/RIGHT/116MM 02.112.113 1 2.7MM/3.5MM LCP POSTLAT DISTAL FIBULA PLATE 6H/LEFT/116MM 02.112.114 1 2.7MM/3.5MM LCP POSTLAT DISTAL FIBULA PLATE 7H/RIGHT/129MM 02.112.115 1 2.7MM/3.5MM LCP POSTLAT DISTAL FIBULA PLATE 7H/LEFT/129MM 02.112.118 1 2.7MM/3.5MM LCP POSTLAT DISTAL FIBULA PLATE 9H/RIGHT/155MM 02.112.119 1 2.7MM/3.5MM LCP POSTLAT DISTAL FIBULA PLATE 9H/LEFT/155MM 02.112.122 1 2.7MM/3.5MM LCP POSTLAT DISTAL FIBULA PLATE 11H/RIGHT/181MM 02.112.123 1 2.7MM/3.5MM LCP POSTLAT DISTAL FIBULA PLATE 11H/LEFT/181MM 02.112.136 1 2.7MM/3.5MM LCP LATERAL DISTAL FIBULA PLATE 3H/RIGHT/73MM 02.112.137 1 2.7MM/3.5MM LCP LATERAL DISTAL FIBULA PLATE 3H/LEFT/73MM 02.112.138 1 2.7MM/3.5MM LCP LATERAL DISTAL FIBULA PLATE 4H/RIGHT/86MM 02.112.139 1 2.7MM/3.5MM LCP LATERAL DISTAL FIBULA PLATE 4H/LEFT/86MM 02.112.140 1 2.7MM/3.5MM LCP LATERAL DISTAL FIBULA PLATE 5H/RIGHT/99MM 02.112.141 1 2.7MM/3.5MM LCP LATERAL DISTAL FIBULA PLATE 5H/LEFT/99MM 02.112.142 1 2.7MM/3.5MM LCP LATERAL DISTAL FIBULA PLATE 6H/RIGHT/112MM 02.112.143 1 2.7MM/3.5MM LCP LATERAL DISTAL FIBULA PLATE 6H/LEFT/112MM 02.112.144 1 2.7MM/3.5MM LCP LATERAL DISTAL FIBULA PLATE 7H/RIGHT/125MM 02.112.145 1 2.7MM/3.5MM LCP LATERAL DISTAL FIBULA PLATE 7H/LEFT/125MM 02.112.148 1 2.7MM/3.5MM LCP LATERAL DISTAL FIBULA PLATE 9H/RIGHT/151MM 02.112.149 1 2.7MM/3.5MM LCP LATERAL DISTAL FIBULA PLATE 9H/LEFT/151MM 02.112.152 1 2.7MM/3.5MM LCP LATERAL DISTAL FIBULA PLATE 11H/RIGHT/177MM 02.112.153 1 2.7MM/3.5MM LCP LATERAL DISTAL FIBULA PLATE 11H/LEFT/177MM 323.061 1 2.0MM THREADED DRILL GUIDE WITH DEPTH GAUGE 323.062 2 2.0MM DRILL BIT WITH DEPTH MARK/QC/140MM 314.467 1 STARDRIVE SCREWDRIVER SHAFT T8 105MM 311.43 1 HANDLE WITH QUICK COUPLING, SMALL 319.006 1 DEPTH GAUGE FOR 2.0MM AND 2.4MM SCREWS 511.776 1 TORQUE LIMITING ATTACHMENT 0.8NM/QUICK COUPLING 313.353 1 2.0MM LCP SOLID THREADED DRILL GUIDE 202.208 2 2.7MM LOCKING SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 8MM 202.210 2 2.7MM LOCKING SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 10MM 202.212 2 2.7MM LOCKING SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 12MM 202.214 2 2.7MM LOCKING SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 14MM 202.216 2 2.7MM LOCKING SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 16MM 202.218 2 2.7MM LOCKING SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 18MM 202.220 2 2.7MM LOCKING SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 20MM 202.222 2 2.7MM LOCKING SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 22MM 202.224 2 2.7MM LOCKING SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 24MM 202.226 2 2.7MM LOCKING SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 26MM 202.228 2 2.7MM LOCKING SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 28MM 202.230 2 2.7MM LOCKING SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 30MM 60.112.046 1 LCP DISTAL FIBULA SET GRAPHIC CASE 60.112.047 1 TRAY F/2.7MM/3.5MM LCP POSTLAT DISTAL FIBULA PLATES Salient Characteristics of the Synthes Distal Radius Set: 01.111.478 1 2.4MM VA-LCP DISTAL RADIUS SYSTEM SET 03.111.005 1 DEPTH GAUGE FOR 2.0MM/2.4MM AND 2.7MM SCREWS 02.111.500.10 1 1.25MM PLATE REDUCTION WIRE THRDD TIP W/SM STOP/150MM 02.111.501.10 1 1.25MM PLATE REDUCTION WIRE THRDD TIP W/LRG STOP/150MM 03.110.023 1 1.8MM VARIABLE ANGLE LOCKING DRILL GUIDE/CONE 03.110.024 1 1.8MM VARIABLE ANGLE LOCKING DRILL GUIDE/COAXIAL 292.12 1 1.25MM KIRSCHNER WIRE W/TROCAR POINT 150MM 292.16 1 1.6MM KIRSCHNER WIRE W/TROCAR POINT 150MM 02.110.300 1 1.8MM KIRSCHNER WIRE WITH TROCAR POINT 150MM 310.19 2 2.0MM DRILL BIT/QC/100MM 310.26 2 2.7MM DRILL BIT/QC/100MM 310.509 2 1.8MM DRILL BIT WITH DEPTH MARK/QC/110MM 310.530 2 2.4MM DRILL BIT/QC/100MM 03.110.007 1 STARDRIVE SCREWDRIVER T8 311.43 1 HANDLE WITH QUICK COUPLING, SMALL 314.467 1 STARDRIVE SCREWDRIVER SHAFT T8 105MM 314.453 1 STARDRIVE SCREWDRIVER SHAFT T8 55MM 314.468 1 HOLDING SLEEVE FOR STARDRIVE SCREWDRIVER SHAFT T8 319.39 1 SHARP HOOK 323.029 2 THREADED LCP(TM) DRILL GUIDE F/LCP(TM) DISTAL RADIUS PLATES 03.110.000 1 1.8MM UNIVERSAL VARIABLE ANGLE LOCKING DRILL GUIDE 323.202 1 2.4MM UNIVERSAL DRILL GUIDE 323.26 1 2.7MM UNIVERSAL DRILL GUIDE 324.084 1 1.25MM K-WIRE INSERT 329.12 2 BENDING PLIERS-SMOOTH JAWS FOR MINI PLATES 329.922 2 BENDING PIN FOR 2.4MM LOCKING PLATES 398.41 1 REDUCTION FORCEPS WITH POINTS BROAD-RATCHET 398.95 1 TERMITE FORCEPS 90MM 399.48 1 PERIOSTEAL ELEVATOR 3MM CURVED BLADE-STRAIGHT EDGE 399.481 1 PERIOSTEAL ELEVATOR 3MM CURVED BLADE - ROUND EDGE 399.97 1 REDUCTION FORCEPS WITH POINTS RATCHET 130MM 03.110.021 2 1.8MM DRILL GUIDE WITH MEASURING FOR GUIDE BLOCK 03.110.005 1 HANDLE FOR TORQUE LIMITING ATTACHMENT 511.776 1 TORQUE LIMITING ATTACHMENT 0.8NM/QUICK COUPLING 02.210.108 5 2.4MM VA LOCKING SCREW STARDRIVE 8MM 02.210.110 5 2.4MM VA LOCKING SCREW STARDRIVE 10MM 02.210.112 5 2.4MM VA LOCKING SCREW STARDRIVE 12MM 02.210.114 10 2.4MM VA LOCKING SCREW STARDRIVE 14MM 02.210.116 10 2.4MM VA LOCKING SCREW STARDRIVE 16MM 02.210.118 15 2.4MM VA LOCKING SCREW STARDRIVE 18MM 02.210.120 15 2.4MM VA LOCKING SCREW STARDRIVE 20MM 02.210.122 15 2.4MM VA LOCKING SCREW STARDRIVE 22MM 02.210.124 10 2.4MM VA LOCKING SCREW STARDRIVE 24MM 02.210.128 5 2.4MM VA LOCKING SCREW STARDRIVE 28MM 02.210.130 5 2.4MM VA LOCKING SCREW STARDRIVE 30MM 201.756 3 2.4MM CORTEX SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 6MM 201.758 3 2.4MM CORTEX SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 8MM 201.760 3 2.4MM CORTEX SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 10MM 201.762 3 2.4MM CORTEX SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 12MM 201.764 3 2.4MM CORTEX SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 14MM 201.766 3 2.4MM CORTEX SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 16MM 201.768 3 2.4MM CORTEX SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 18MM 201.770 3 2.4MM CORTEX SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 20MM 201.772 3 2.4MM CORTEX SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 22MM 201.774 3 2.4MM CORTEX SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 24MM 201.776 3 2.4MM CORTEX SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 26MM 201.778 3 2.4MM CORTEX SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 28MM 201.780 3 2.4MM CORTEX SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 30MM 202.870 3 2.7MM CORTEX SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 10MM 202.872 3 2.7MM CORTEX SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 12MM 202.874 3 2.7MM CORTEX SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 14MM 202.876 3 2.7MM CORTEX SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 16MM 202.878 3 2.7MM CORTEX SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 18MM 202.880 3 2.7MM CORTEX SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 20MM 202.882 3 2.7MM CORTEX SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 22MM 202.884 3 2.7MM CORTEX SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 24MM 202.886 3 2.7MM CORTEX SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 26MM 202.888 3 2.7MM CORTEX SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 28MM 202.890 3 2.7MM CORTEX SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 30MM 02.210.078 3 1.8MM VA LOCKING BUTTRESS PIN WITH T8 STARDRIVE RECESS/8MM 02.210.080 3 1.8MM VA LOCKING BUTTRESS PIN WITH T8 STARDRIVE RECESS/10MM 02.210.082 3 1.8MM VA LOCKING BUTTRESS PIN WITH T8 STARDRIVE RECESS/12MM 02.210.084 3 1.8MM VA LOCKING BUTTRESS PIN WITH T8 STARDRIVE RECESS/14MM 02.210.086 6 1.8MM VA LOCKING BUTTRESS PIN WITH T8 STARDRIVE RECESS/16MM 02.210.088 6 1.8MM VA LOCKING BUTTRESS PIN WITH T8 STARDRIVE RECESS/18MM 02.210.090 6 1.8MM VA LOCKING BUTTRESS PIN WITH T8 STARDRIVE RECESS/20MM 02.210.092 6 1.8MM VA LOCKING BUTTRESS PIN WITH T8 STARDRIVE RECESS/22MM 02.210.094 6 1.8MM VA LOCKING BUTTRESS PIN WITH T8 STARDRIVE RECESS/24MM 02.210.098 3 1.8MM VA LOCKING BUTTRESS PIN WITH T8 STARDRIVE RECESS/28MM 02.210.100 3 1.8MM VA LOCKING BUTTRESS PIN WITH T8 STARDRIVE RECESS/30MM 02.111.520 1 2.4MM VA-LCP 2-COL DSTL RAD PL NRW 6H HD/2H SHAFT/RT 02.111.530 1 2.4MM VA-LCP 2-COL DSTL RAD PL NRW 6H HD/3H SHAFT/RT 02.111.540 1 2.4MM VA-LCP 2-COL DSTL RAD PL NRW 6H HD/4H SHAFT/RT 02.111.550 1 2.4MM VA-LCP 2-COL DSTL RAD PL NRW 6H HD/5H SHAFT/RT 02.111.521 1 2.4MM VA-LCP 2-COL DSTL RAD PL NRW 6H HD/2H SHAFT/LT 02.111.531 1 2.4MM VA-LCP 2-COL DSTL RAD PL NRW 6H HD/3H SHAFT/LT 02.111.541 1 2.4MM VA-LCP 2-COL DSTL RAD PL NRW 6H HD/4H SHAFT/LT 02.111.551 1 2.4MM VA-LCP 2-COL DSTL RAD PL NRW 6H HD/5H SHAFT/LT 03.111.500 1 GUIDE BLOCK FOR TWO-COLUMN PLATE/NARROW 6H HD/RT 03.111.501 1 GUIDE BLOCK FOR TWO-COLUMN PLATE/NARROW 6H HD/LT 60.111.465 1 MODULE FOR VA-LCP 2-COLUMN VOLAR DSTL RADIUS PL/NARROW 02.111.620 1 2.4MM VA-LCP 2-CLMN VLR DSTL RADIUS PL 6H HD/2H SHAFT/RIGHT 02.111.621 1 2.4MM VA-LCP 2-CLMN VLR DSTL RADIUS PL 6H HD/2H SHAFT/LEFT 02.111.630 1 2.4MM VA-LCP 2-CLMN VLR DSTL RADIUS PL 6H HD/3H SHAFT/RIGHT 02.111.631 1 2.4MM VA-LCP 2-CLMN VLR DSTL RADIUS PL 6H HD/3H SHAFT/LEFT 02.111.640 1 2.4MM VA-LCP 2-CLMN VLR DSTL RADIUS PL 6H HD/4H SHAFT/RIGHT 02.111.641 1 2.4MM VA-LCP 2-CLMN VLR DSTL RADIUS PL 6H HD/4H SHAFT/LEFT 02.111.650 1 2.4MM VA-LCP 2-CLMN VLR DSTL RADIUS PL 6H HD/5H SHAFT/RIGHT 02.111.651 1 2.4MM VA-LCP 2-CLMN VLR DSTL RADIUS PL 6H HD/5H SHAFT/LEFT 02.111.720 1 2.4MM VA-LCP 2-CLMN VLR DSTL RADIUS PL 7H HD/2H SHAFT/RIGHT 02.111.721 1 2.4MM VA-LCP 2-CLMN VLR DSTL RADIUS PL 7H HD/2H SHAFT/LEFT 02.111.730 1 2.4MM VA-LCP 2-CLMN VLR DSTL RADIUS PL 7H HD/3H SHAFT/RIGHT 02.111.731 1 2.4MM VA-LCP 2-CLMN VLR DSTL RADIUS PL 7H HD/3H SHAFT/LEFT 02.111.740 1 2.4MM VA-LCP 2-CLMN VLR DSTL RADIUS PL 7H HD/4H SHAFT/RIGHT 02.111.741 1 2.4MM VA-LCP 2-CLMN VLR DSTL RADIUS PL 7H HD/4H SHAFT/LEFT 02.111.750 1 2.4MM VA-LCP 2-CLMN VLR DSTL RADIUS PL 7H HD/5H SHAFT/RIGHT 02.111.751 1 2.4MM VA-LCP 2-CLMN VLR DSTL RADIUS PL 7H HD/5H SHAFT/LEFT 03.111.600 1 GUIDE BLOCK FOR 2 COLUMN PLATE 6 HOLE HEAD/RIGHT 03.111.601 1 GUIDE BLOCK FOR 2 COLUMN PLATE 6 HOLE HEAD/LEFT 03.111.700 1 GUIDE BLOCK FOR 2 COLUMN PLATE 7 HOLE HEAD/RIGHT 03.111.701 1 GUIDE BLOCK FOR 2 COLUMN PLATE 7 HOLE HEAD/LEFT 60.111.461 1 MODULE F/VA-LCP 2-COLUMN VOLAR DISTAL RADIUS PLATE 02.110.201 1 VA-LCP VOLAR DISTAL RADIUS PL 5H HEAD/3H SHAFT/RT 02.110.202 1 VA-LCP VOLAR DISTAL RADIUS PL 5H HEAD/5H SHAFT/RT 02.110.203 1 VA-LCP VOLAR DISTAL RADIUS PL 5H HEAD/3H SHAFT/LT 02.110.204 1 VA-LCP VOLAR DISTAL RADIUS PL 5H HEAD/5H SHAFT/LT 02.110.205 1 VA-LCP VOLAR DISTAL RADIUS PL 4H HEAD/3H SHAFT/RT 02.110.206 1 VA-LCP VOLAR DISTAL RADIUS PL 4H HEAD/5H SHAFT/RT 02.110.207 1 VA-LCP VOLAR DISTAL RADIUS PL 4H HEAD/3H SHAFT/LT 02.110.208 1 VA-LCP VOLAR DISTAL RADIUS PL 4H HEAD/5H SHAFT/LT 60.111.467 1 MODULE FOR VA-LCP VOLAR EXTRA-ARTICLR DSTL RADIUS PL 02.210.096 6 1.8MM VA LOCKING BUTTRESS PIN WITH T8 STARDRIVE RECESS/26MM 02.210.126 10 2.4MM VA LOCKING SCREW STARDRIVE 26MM 399.18 1 SMALL HOHMANN RETRACTOR 6MM SHORT NARROW TIP 160MM 399.19 1 SMALL HOHMANN RETRACTOR 8MM SHORT NARROW TIP 160MM 60.116.054 4 MODULE ADAPTERS FOR 1 HIGH MODULES/F/MODULAR GC SYS 02.115.130 1 2.4MM VA-LCP DORSAL DISTAL RAD L-PLATE +90°/2H HD/3H SHAFT 02.115.131 1 2.4MM VA-LCP DORSAL DISTAL RAD L-PLATE -90°/2H HD/3H SHAFT 02.115.150 1 2.4MM VA-LCP DORSAL DISTAL RAD L-PLATE +90°/2H HD/5H SHAFT 02.115.151 1 2.4MM VA-LCP DORSAL DISTAL RAD L-PLATE -90°/2H HD/5H SHAFT 02.115.230 1 2.4MM VA-LCP DORSAL DISTAL RAD L-PLATE +90°/3H HD/3H SHAFT 02.115.231 1 2.4MM VA-LCP DORSAL DISTAL RAD L-PLATE -90°/3H HD/3H SHAFT 02.115.250 1 2.4MM VA-LCP DORSAL DISTAL RAD L-PLATE +90°/3H HD/5H SHAFT 02.115.251 1 2.4MM VA-LCP DORSAL DISTAL RAD L-PLATE -90°/3H HD/5H SHAFT 02.115.330 1 2.4MM VA-LCP DORSAL DISTAL RAD T-PLATE/3H HD/3H SHAFT 02.115.350 1 2.4MM VA-LCP DORSAL DISTAL RAD T-PLATE/3H HD/5H SHAFT 02.115.430 1 2.4MM VA-LCP DORSAL DISTAL RAD L-PLATE +20°/3H HD/3H SHAFT 02.115.431 1 2.4MM VA-LCP DORSAL DISTAL RAD L-PLATE -20°/3H HD/3H SHAFT 02.115.450 1 2.4MM VA-LCP DORSAL DISTAL RAD L-PLATE +20°/3H HD/5H SHAFT 02.115.451 1 2.4MM VA-LCP DORSAL DISTAL RAD L-PLATE -20°/3H HD/5H SHAFT 02.115.530 1 2.4MM VA-LCP DORSAL DISTAL RAD PLATE/RADIAL COLUMN/5H SHAFT 02.115.540 1 2.4MM VA-LCP DORSAL DISTAL RAD PLATE/RADIAL COLUMN/6H SHAFT 02.115.630 1 2.4MM VA-LCP DRSL DRP/INTMD CLMN/+90°/2H HD/3H SHAFT 02.115.631 1 2.4MM VA-LCP DRSL DRP/INTMD CLMN/-90°/2H HD/3H SHAFT 02.115.640 1 2.4MM VA-LCP DRSL DRP/INTMD CLMN/+90°/2H HD/4H SHAFT 02.115.641 1 2.4MM VA-LCP DRSL DRP/INTMD CLMN/-90°/2H HD/4H SHAFT 60.111.476 1 MODULE FOR 2.4MM VA-LCP DORSAL DISTAL RADIUS PLATES 61.111.469 1 SCREW RACK FOR 2.4MM VA-LCP DSTL RADIUS SYS GRAPHIC CASE 61.111.471 1 2/3 INSTR TRAY FOR LCP AND VA-LCP DISTAL RADIUS SYSTEMS 61.111.472 1 1/3 INSTR TRAY FOR DSTL RADIUS FORCEPS AND BENDING PLIERS 61.111.473 1 1/3 INSTR TRAY FOR DSTL RAD RETRACTORS/HOOK/ELEVATORS 61.116.001 1 GRAPHIC CASE/FULL LENGTH 4 BAY/F/MODULAR GC SYSTEM Additional Information: Both the Fibula and Radius Synthes Sets are required for the reasons stated above, and because of their superior design. They are variable angle devices, made of stainless steel, and feature anatomic shape and profile. They have combi holes which provides the benefit of axial compression and variable angle locking capability. They also allow for fixation of small metaphyseal and epiphyseal segments where traditional screw fixation may be limited. The sets are also modular which allows customized selection of implants. Delivery: Delivery shall be within thirty (30) days from the time of award. The Synthes Sets shall be delivered to the Lebanon VAMC located at 1700 S. Lincoln Ave., Lebanon, PA 17042; Attn; Warehouse. BioMedical Engineering will need to perform a safety check and enter the equipment into the system for annual Preventive Maintenance (PM) checks. Placement in the LVAMC clinic shall be coordinated through SPS who will receive the items for sterilization prior to use, and the Contracting Officer Representative. End Draft Statement of Need POINT OF CONTACT (POC): The identified POC and technical representative for this acquisition is: Name: Debrah Mentzer Phone Number: +1 (555) 000-0000 x5860 Email: contact@example.gov "No Government personnel, other than the Contracting Officer, have the authority to change or alter these requirements. The COR shall clarify technical points or supply relevant technical information, but no requirements in this scope of work may be altered as a sole result of such verbal clarification." REPORTS/DELIVERABLES: Delivery confirmation of equipment and commodities will be made through the Logistics Department of the VAMC Lebanon (595). This will include documentation of receipt and assignment of a facility based EE number for identification and tracking purposes. Delivery confirmation of non-equipment/ commodities acquisitions is the responsibility of the receiving Facility and/ or Service. Request for Information Instructions The information identified above is intended to be descriptive, not restrictive and to indicate the quality of the supplies/services that will be satisfactory. It is the responsibility of the interested source to demonstrate to the government that the interested parties can provide the supplies/services that fulfill the required specifications mentioned above. Responses to this RFI should include company name, address, point of contact, phone number, and point of contact e-mail, DUNS Number, Cage Code, size of business pursuant to North American Industrial Classification System (NAICS) 339113 (size standard of 750 employees). Please answer the following questions: Please indicate the size status and representations of your business, such as but not limited to: Service-Disabled Veteran Owned Small Business (SDVOSB), Veteran Owned Small Business (VOSB), Hubzone, Woman Owned Small Business (WOSB), Large Business, etc.)? Is your company considered small under the NAICS code identified under this RFI? Are you the manufacturer, distributor, or an equivalent solution to the items being referenced above? If not, can you provide additional information shown below. This is to confirm compliance with the non-manufacturer rule IAW 13 CFR 121.406(b) Nonmanufacturers. Does your company exceed 500 employees; Primarily engaged in the retail or wholesale trade and normally sells the type of item being supplied; Take ownership or possession of the item(s) with its personnel, equipment or facilities in a manner consistent with industry practice; Obtained an individual or class waiver? If you are a large business, do you have any designated distributors? If so, please provide their company name, telephone, point of Contact and size status (if available). If you re a small business and you are an authorized distributor/reseller for the items identified above or an equivalent solution, do you alter; assemble; modify; the items requested in any way? If you do, state how and what is altered; assembled; modified? If you intend to subcontract any work on this contract, what portion of the total cost will be self-performed/will be performed by your organization? Please provide estimated detailed percentage breakdowns related to subcontracted work and completion of job. Does your company have an FSS contract with GSA or the NAC or are you a contract holder with any other federal contract? If so, please provide the contract number. If you are an FSS GSA/NAC contract holder or other federal contract holder, are the items/solution you are providing information for available on your schedule/contract? General pricing of your products/solution is encouraged. Pricing will be used for the purpose of market research only. It will not be used to evaluate for any type of award. Please submit your capabilities in regard to the salient characteristics detailed above and any information pertaining to equal to items to establish capabilities for planning purposes? (11)Please review salient characteristics/statement of work (if applicable) and provide feedback or suggestions. If none, please reply as N/A. (12)Please provide your DUNS number. This RFI will be conducted in accordance with Federal Acquisition Regulation (FAR) Part 13. Telephone responses will not be accepted. Responses must be received via e-mail to contact@example.gov no later than, 3:00 PM Eastern Standard Time (EST) on November 9, 2021. This notice will help the VA in determining available potential sources only. Do not contact VA Medical Center staff regarding this requirement, as they are not authorized to discuss this matter related to this procurement action. All questions will be addressed by the Contracting Specialist, Allan Tabliago. All firms responding to this Request for Information are advised that their response is not a request for proposal, therefore will not be considered for a contract award. Any interested business concern must submit a no longer that 10-page capability statement addressing its ability to meet the requirements listed above to Capability Statement shall include a statement regarding how the business concern is engaged in wholesale trade and normally sells the item being supplied and how the business concern will take ownership of the items being delivered. Vendors shall also provide certification, evidence that they are an authorized distributor of the Original Equipment Manufacturer. If a solicitation is issued, information will be posted on the SAM web site for all qualified interested parties at a later date and interested parties must respond to the solicitation to be considered for award. This notice does not commit the government to contract for any supplies or services. The government will not pay for any information or administrative cost incurred in response to this Request for Information. Information will only be accepted in writing by e-mail to Contracting Officer at contact@example.gov. DISCLAIMER This RFI is issued solely for information and planning purposes only and does not constitute a solicitation. All information received in response to this RFI that is marked as proprietary will be handled accordingly. Responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. Responders are solely responsible for all expenses associated with responding to this RFI. End of Document