6540--TOPCON Maestro2 Camera

This solicitation is issued as an RFQ. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2022-08 published in the Federal register October 28, 2022. This solicitation is set-aside for SDVOSB The associated North American Industrial Classification System (NAICS) code for this procurement is 339115 (Ophthalmic Instruments, Equipment, and Supplies) with a small business size standard of 1000 Employees. The FSC/PSC is 6540 (Ophthalmic Instruments, Equipment, and Supplies). The Network Contracting Office (NCO) 6 Regional Procurement Office (RPO) EAST Salem VA Medical Center, 1970 Roanoke Blvd Salem VA 24153 is seeking to purchase Brand Name or Equal MAESTRO 2. Salient Characteristics Widefield OCT OCT angiography Panoramic true color fundus photography Fully automated image capture Automatic 3D layer segmentation Anterior Segment OCT 3D volume view The purchase order period of performance: N/A Delivery shall be provided on or before 04/30/2023 or no later than 90 days after receipt of order (ARO). FOB: Destination Place of Performance/Place of Delivery: Salem Veterans Affairs Medical Center Address: 1970 Roanoke Blvd Salem VA Postal Code: 24153 Country: United States Vendors with a GSA schedule shall provide the contract number of that schedule and the expiration date as well as product NAICS codes. All items should be clearly identified if they are scheduled items or open market items. All quoters shall submit responses no later than 11:00 am Eastern Standard Time (EST) Wednesday: December 28, 2022. Respondents to this RFQ shall provide the following information: Company/individual name, Address, Point of contact with phone number Information describing your interest, Indicate FSS/GSA contract number or Open Market, as applicable FSS Category you qualify for Tax ID number UEI Number (Unique Entity ID) DUN Number Capabilities statement Company Socio-Economic SIZE (example large, small, SDVOSB, VOSB, WOSB etc.) 852.219-73 VA Notice of Total Set-Aside for Verified Service-Disabled Veteran-Owned Small Businesses. As prescribed in 819.7011, insert the following clause: VA Notice Of Total set-Aside For Verified Service-Disabled Veteran-Owned Small Businesses (NOV 2022) (a) Definition. for the Department of Veterans Affairs, Service-disabled Veteran-owned small business concern or SDVOSB : (1) Means a small business concern - (i) Not less than 51 percent of which is owned by one or more service-disabled Veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled Veterans or eligible surviving spouses (see VAAR 802.201, Surviving Spouse definition); (ii) The management and daily business operations of which are controlled by one or more service-disabled Veterans (or eligible surviving spouses) or, in the case of a service-disabled Veteran with permanent and severe disability, the spouse or permanent caregiver of such Veteran; (iii) The business meets Federal small business size standards for the applicable North American Industry Classification System (NAICS) code identified in the solicitation document; (iv) The business has been verified for ownership and control pursuant to 38 CFR part 74 and is listed in VA's Vendor Information Pages (VIP) database at https://www.vetbiz.va.gov/vip/; and (v) The business will comply with VAAR subpart 819.70 and Small Business Administration (SBA) regulations regarding small business size and government contracting programs at 13 CFR parts 121 and 125, provided that any reference therein to a service-disabled veteran-owned small business concern or SDVO SBC, is to be construed to apply to a VA verified and VIP-listed SDVOSB, unless otherwise stated in this clause. (2) The term Service-disabled Veteran means a Veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16). (3) The term small business concern has the meaning given that term under section 3 of the Small Business Act (15 U.S.C. 632). (4) The term small business concern owned and controlled by Veterans with service-connected disabilities has the meaning given the term small business concern owned and controlled by service-disabled veterans - under section 3(q)(2) of the Small Business Act (15 U.S.C. 632(q)(2)), except that for a VA contract the firm must be listed in the VIP database (see paragraph (a)(1)(iv) of this clause). (b) General. (1) Offers are solicited only from VIP-listed SDVOSBs. Offers received from entities that are not VIP-listed SDVOSBs at the time of offer shall not be considered. (2) Any award resulting from this solicitation shall be made to a VIP-listed SDVOSB who is eligible at the time of submission of offer(s) and at the time of award. (3) The requirements in this clause apply to any contract, order or subcontract where the firm receives a benefit or preference from its designation as an SDVOSB, including set-asides, sole source awards, and evaluation preferences. (c) Representation. Pursuant to 38 U.S.C. 8127(e), only VIP-listed SDVOSBs are considered eligible to receive award of a resulting contract. By submitting an offer, the prospective contractor represents that it is an eligible SDVOSB as defined in this clause, 38 CFR part 74, and VAAR subpart 819.70. (d) Agreement. When awarded a contract action, including orders under multiple-award contracts, an SDVOSB agrees that in the performance of the contract, the SDVOSB shall comply with requirements in VAAR subpart 819.70 and SBA regulations on small business size and government contracting programs at 13 CFR part 121 and part 125, including the non-manufacturer rule and limitations on subcontracting requirements in 13 CFR 121.406(b) and 13 CFR 125.6. Unless otherwise stated in this clause, a requirement in 13 CFR parts 121 and 125 that applies to an SDVO SBC, is to be construed to also apply to a VIP-listed SDVOSB. For the purpose of limitations on subcontracting, only VIP-listed SDVOSBs (including independent contractors) shall be considered eligible and/or similarly situated (i.e., a firm that has the same small business program status as the prime contractor). An otherwise eligible firm further agrees to comply with the required certification requirements in this solicitation (see 852.219-75 or 852.219-76 as applicable). These requirements are summarized as follows: (1) Services. In the case of a contract for services (except construction), the SDVOSB prime contractor will not pay more than 50% of the amount paid by the government to the prime for contract performance to firms that are not VIP-listed SDVOSBs (excluding direct costs to the extent they are not the principal purpose of the acquisition and the SDVOSB/VOSB does not provide the service, such as airline travel, cloud computing services, or mass media purchases). When a contract includes both services and supplies, the 50 percent limitation shall apply only to the service portion of the contract (2) Supplies/products. (i) In the case of a contract for supplies or products (other than from a non-manufacturer of such supplies), the SDVOSB prime contractor will not pay more than 50% of the amount paid by the government to the prime for contract performance, excluding the cost of materials, to firms that are not VIP-listed SDVOSBs. When a contract includes both supply and services, the 50 percent limitation shall apply only to the supply portion of the contract. (ii) In the case of a contract for supplies from a non-manufacturer, the SDVOSB prime contractor will supply the product of a domestic small business manufacturer or processor, unless a waiver as described in 13 CFR 121.406(b)(5) has been granted. Refer to 13 CRF 125.6(a)(2)(ii) for guidance pertaining to multiple item procurements. (3) General construction. In the case of a contract for general construction, the SDVOSB prime contractor will not pay more than 85% of the amount paid by the government to the prime for contract performance, excluding the cost of materials, to firms that are not VIP-listed SDVOSBs. (4) Special trade construction contractors. In the case of a contract for special trade contractors, no more than 75% of the amount paid by the government to the prime for contract performance, excluding the cost of materials, may be paid to firms that are not VIP-listed SDVOSBs. (5) Subcontracting. An SDVOSB must meet the NAICS size standard assigned by the prime contractor and be listed in VIP to count as similarly situated. Any work that a first tier VIP-listed SDVOSB subcontractor further subcontracts will count towards the percent of subcontract amount that cannot be exceeded. For supply or construction contracts, the cost of materials is excluded and not considered to be subcontracted. When a contract includes both services and supplies, the 50 percent limitation shall apply only to the portion of the contract with the preponderance of the expenditure upon which the assigned NAICS is based. For information and more specific requirements, refer to 13 CFR 125.6. (e) Required limitations on subcontracting compliance measurement period. An SDVOSB shall comply with the limitations on subcontracting as follows: [Contracting Officer check as appropriate.] __By the end of the base term of the contract or order, and then by the end of each subsequent option period; or __By the end of the performance period for each order issued under the contract. (f) Joint ventures. A joint venture may be considered eligible as an SDVOSB if the joint venture is listed in VIP and complies with the requirements in 13 CFR 125.18(b), provided that any requirement therein that applies to an SDVO SBC is to be construed to apply to a VIP-listed SDVOSB. A joint venture agrees that, in the performance of the contract, the applicable percentage specified in paragraph (d) of this clause will be performed by the aggregate of the joint venture participants. (g) Precedence. The VA Veterans First Contracting Program, as defined in VAAR 802.101, subpart 819.70, and this clause, takes precedence over any inconsistencies between the requirements of the SBA Program for SDVO SBCs, and the VA Veterans First Contracting Program. (h) Misrepresentation. Pursuant to 38 U.S.C. 8127(g), any business concern, including all its principals, that is determined by VA to have willfully and intentionally misrepresented a company's SDVOSB status is subject to debarment from contracting with the Department for a period of not less than five years (see VAAR 809.406-2 Causes for Debarment). (End of clause) All quotes shall be sent in writing via Email to contact@example.gov. No telephone inquiries will be accepted. The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the government, price and other factors considered. The following factors will be considered: The award will be made to the response most advantageous to the Government. Responses should contain your best terms, conditions. ADDENDUM to FAR 52.212-1 INSTRUCTIONS TO OFFERORS COMMERCIAL ITEMS Provisions that are incorporated by reference (by Citation Number, Title, and Date), have the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The following provisions are incorporated into 52.212-1 as an addendum to this solicitation: E.1 INSTRUCTIONS TO OFFERORS Pricing Pricing shall be submitted on the Attachment A. Price/Cost Schedule. The following fields require completion on the attachment. Do not change the format or add/delete any columns in the Excel Spreadsheet. Colum Element Name Line Item Template Name Selection/Input K Unit of Measure: Unit of Measure Select the applicable 'Unit of Measure' from the dropdown. The 'Unit of Measure' EA should always have a 'Packaging Multiple' of 1 L Packaging Multiple Packaging Multiple Enter the total quantity that comes in each 'Unit of Measure' i.e., How many come in each CS, CT, PG, etc. The 'Unit of Measure' EA should always have a 'Packaging Multiple' of 1 M LIN is: Line Item Is Select 'Priced', 'NSP' (Not Separately Priced), or 'N/C' (No Charge) from the dropdown N Unit Price ($): Unit Price Enter the price for each 'Unit of Measure' i.e., What is the cost of each CS, CT, PG, etc. AM MANUFACTURER PART NUMBER (MPN): MANUFACTURER PART NUMBER (MPN) The MPN identifies the manufacturer from which an item originated. Its purpose is to identify the company that made the part, as opposed to a SKU number that is used for inventory record keeping by the Vendor. Each MPN is unique and can be composed of letters, numbers, or both. BY ITEM PART NUMBER ITEM PART NUMBER Enter the distributor/vendor part number if different than the mfg. part number. CG OEM NAME: OEM NAME Enter the Name of the OEM. Do not enter the Distributor/Vendor Name unless the Distributor/Vendor is the Manufacturer. To facilitate the award process, all quotes must include a statement regarding the terms and conditions herein as follows: The terms and conditions in the solicitation are acceptable to be included in the award document without modification, deletion, or addition." OR "The terms and conditions in the solicitation are acceptable to be included in the award document with the exception, deletion, or addition of the following:" Quoters shall list exception(s) and rationale for the exception(s), if any Submission of your response shall be received via Email in Microsoft Office format no later than 11:00 AM (EST) Tuesday: December 28, 2022. Please include RFQ# 36C24623Q0264 in subject title. NOTE: Responses to this announcement will not be returned, nor will there be any ensuing discussions or debriefings of any responses. However, information obtained as a result of this announcement may be reflected in any subsequent solicitation. This announcement is Government market research purposes ONLY. Late submissions shall be treated in accordance with the solicitation provision at FAR 52.212-1(f). Any questions or concerns regarding this RFQ-solicitation are due by 11:00 AM EST on Friday, December 23, 2022; and should be forwarded in writing via e-mail to the Point of Contact listed below. Point of Contact Ruth A. Morris contact@example.gov