Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CONTRACTOR FIRST ARTIC

Active
SPE4A5-26-T-321LFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of a self-indicating bimetallic thermometer, with the exception of a 9/32-inch dimension shown in Figure 2 on page 16, which is to be deleted. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with versions controlled based on the solicitation or award date depending on acquisition type. The item must comply with stringent packaging, marking, and inspection standards including MIL-STD-2073-1E, MIL-STD-129, and MIL-PRF-23199, and must be palletized per DLA packaging requirements. Mercury and mercury-containing compounds are strictly prohibited in all aspects of the product, preservation, packaging, and labeling, except for functional uses in batteries, fluorescent lights, sensors, or instrument controls as explicitly allowed by NAVSEA, with additional containment requirements for any permitted mercury devices. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and all attributes are assigned verification levels or AQLs based on criticality. The item is designated as a critical application and must conform to the Technical Data Package revision A, Gen 1, per MIL-I-17244E and other referenced documents. A first article test requirement is included as a separate line item with one unit, priced at $1.00, but no award will be made if waived. Delivery is FOB origin, with a required delivery date of March 15, 2027, for 280 units, and a need ship date of January 29, 2026. The contract is a total small business set-aside, with inspection and acceptance occurring at origin, and shipment must be directed to the DLA Distribution facility in New Cumberland, Pennsylvania.

General Info

Procure 280 thermometers and one unit, small business set aside, delivery deadlines 240 and 30 days, SAM.gov solicitation.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

334519 - Other Measuring and Controlling Device ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

SBA

Documents

(1)

SPE4A5-26-T-321L.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Combined Synopsis

Type Changed

Combined Synopsis → Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
STEVEN OLIVER
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
THERMOMETER,SELF-INDICATING,BIMETALLIC
THERMOMETER,SELF-INDICATING,BIMETALLIC EXCEPTION DELETE 9/32" DIMENSION
IN FIGURE 2
PAGE 16.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RT001: MEASURING AND TEST EQUIPMENT
The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
“Contract Data Requirements List (CDRL) Applies, See Technical Data Package.”
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPE4A5-26-T-321L
SECTION B
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC SPEC NR MIL-I-17244E(5) NOT 2 REVISION NR E DTD 02/26/2021 PART PIECE NUMBER: ITD-3-24-A-2
TDP Rev A Gen 1 IAW REFERENCE QAP 13873 CDRL-G-17244DWG-09358 REVISION NR DTD 01/05/2010 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE UNK DI-DRPR-80651 NOT 2 REVISION NR DTD 03/15/2022 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017740333 0001 EA 280.000
NSN/MATERIAL:6685007825249
DELIVERY (IN DAYS):0240
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PACKAGING SHALL BE IAW MIL-PRF-23199 MARKING / LABELING / BARCODING SHALL
SPE4A5-26-T-321L
SECTION B
PR: 7017740333 PRLI: 0001 CONT’D
BE IAW MIL-STD-129
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/29/2026 Original Required Delivery Date:03/15/2027
CONTRACTOR FIRST ARTICLE TEST THE NUMBER OF UNITS SHOWN SIGNIFIES THE
TEST REQUIREMENT. SEE FAR CLAUSE 52.209-3 CITED IN SECTION A OF THIS
SOLICITATION FOR THE ACTUAL QUANTITY REQUIRED.
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 0000000000 EA 1.000
NSN/MATERIAL:0001S00000053
DELIVERY (IN DAYS):0030
THIS LINE ITEM SIGNIFIES THE FIRST ARTICLE TEST REQUIREMENT (FAT). SEE
CLAUSES FOR INFORMATION CONCERNING THE FAT REQUIREMENT. OFFERS THAT DO
NOT CITE A PRICE FOR THIS LINE ITEM SHALL BE EVALUATED UNDER THE
SPE4A5-26-T-321L
SECTION B
PR: PRLI: CONT’D
ASSUMPTION THAT THERE IS NO SEPARATE CHARGE FOR THE FAT. IN THE EVENT
THE FAT REQUIREMENT IS WAIVED, NO AWARD WILL BE MADE FOR THIS LINE ITEM.
THE NUMBER OF UNITS SHOWN APPEARS AS “1 EA”. THIS QUANTITY SIGNIFIES
THE TEST REQUIREMENT. OFFERORS WILL FIND THE ACTUAL QUANTITY REQUIRED
BY THE GOVERNMENT FOR THE FAT LINE ITEM PER FAR 52.209-3 OR 52.209-4 IN
SECTION A OF THIS SOLICITATION.
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
Need Ship Date:00/00/0000 Original Required Delivery Date:00/00/0000
SPE4A5-26-T-321L NSN/Part Number: 0001S00000053 Quantity: 280 EA Purchase Request: 7017740333QTY - See Solicitation Delivery: 240 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334519
New
DIBBS
ADAPTER, GAGE
Solicitation # SPE4A5-26-T-321C
The contract pertains to the procurement of an Adapter, Gage with NSN 6685-00-274-5533 and part number 421371-1, manufactured by Enerpac Tool Group Corp under specification SPE4A5-26-T-321C. Nine units are required at a unit price of $9.00, with delivery due in 171 days FOB origin to DLA Distribution San Diego. The item is classified as a critical application item requiring physical identification and compliance with MIL-STD-129 marking standards. Packaging must adhere to MIL-STD-2073-1E, with specific preservation methods and unit containment codes, and palletization must meet DLA’s packaging requirements. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances under sampling plans specified by MIL-STD-1916 or equivalent zero-based systems, unless otherwise designated. Attributes are assigned verification levels or AQLs per defined standards, and unspecied attributes are treated as major. Mercury and mercury-containing compounds are strictly prohibited except in exempted functional components such as batteries or instrument sensors, which must include secondary containment as per NAVSEA 5100-003D. Configuration changes require formal engineering change proposals or variance requests, and government identification must be removed from non-accepted supplies. Covered defense information provisions apply, and the contract explicitly excludes Item Unique Identification per DFARS 252.211-7003(c)(1)(i). The solicitation opened on August 4, 2026, with responses due August 12, 2026, and performance is directed under DLA’s authorized unit of issue system with full alignment to technical and quality requirements referenced from the DLA Master List.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
ADAPTER ASSEMBLY, COMPA
Solicitation # SPE4A5-26-T-321S
This contract specifies the procurement of an Adapter Assembly, Comparator, identified by NSN 6685-00-934-8642 and part number 3460-108-0120, with a quantity of four units. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revision control based on the solicitation or award date depending on the acquisition size. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, including marking per MIL-STD-129 with no special markings required. The item is designated as a Critical Application Item, and mercury or mercury-containing compounds are strictly prohibited in any hardware, preservation, packaging, or marking materials except for specific functional applications such as batteries, fluorescent lights, sensors, or chemical reagents as defined by NAVSEA, with portable devices containing mercury requiring shock-proof construction and a secondary containment boundary. Sampling for inspection follows MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and only zero non-conformances are acceptable unless otherwise stated. Delivery is FOB origin, with inspection and acceptance occurring at destination, and the item must be delivered within 171 days from the award date with zero tolerance for quantity variance. The destination is the DLA Distributor San Joaquin warehouse in Tracy, CA, with shipping details and transportation governed by DLAD Proc Notes C19 and C20. The original required delivery date is January 18, 2027, with a need ship date of January 31, 2027, and the contract was solicited under SPE4A5-26-T-321S with a response deadline of August 12, 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
RATIO UNIT, INDICATO
Solicitation # SPE4A5-26-T-327S
This contract, issued under solicitation SPE4A5-26-T-327S by the Department of Defense’s ASC Supplier Oper OEM Division, pertains to the procurement of 17 units of part number 177014T2 with NSN 6680-00-443-6552, identified as a critical application item from Simmonds Precision Products Inc. The requirement incorporates technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, identified by R or I codes, with compliance governed by the revision in effect on the solicitation issue date. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129 respectively, with no special marking required, and palletization must follow DLA packaging guidelines. Item Unique Identification is waived per the Service customer's request, but physical identification of bare items must still be applied per RQ017. Sampling must conform to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances allowed unless specified otherwise, and testing equipment must meet RT001 standards. The contract mandates delivery to Hill AFB, Utah, FOB origin, with a delivery window of 263 days from the award date and a required ship date of May 17, 2026, though the original delivery requirement is set for October 20, 2027. Quality assurance procedures include zero tolerance for non-conformances during inspection at destination, and cybersecurity compliance requires a CMMC Level 2 self-assessment. The quantity is fixed at 17 units with no variance allowed, priced at $17.00 per unit, totaling $289.00. All documentation, transportation, and logistics procedures must align with DLA procedural notes C19 and C20, and the unit of issue is EA. The point of contact for inquiries is Linda Chatman, with the solicitation closed on August 12, 2026, following a posting date of August 4, 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
SWITCH, LIQUID LEVEL
Solicitation # SPE4A5-26-T-324V
The contract pertains to the procurement of 10 units of a liquid level switch identified by NSN 6680-01-512-5543 under solicitation SPE4A5-26-T-324V, with delivery required within 171 days to the DLA Distribution San Joaquin facility in Tracy, California. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which supersede other standards like ASTM D3951, and must be packaged per MIL-STD-129 and RP001 packaging guidelines. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes are to be verified at levels VII, IV, and II respectively. Mercury and mercury-containing compounds are strictly prohibited in or on the hardware except for defined exceptions such as functional use in batteries, fluorescent lamps, instruments, sensors, weapon systems, or specific chemical reagents approved by NAVSEA; portable devices containing mercury must include a secondary containment and be shockproof per NAVSEA 5100-003D. The unit of issue is each, with no tolerance on quantity variance, and inspection and acceptance occur at the destination. The delivery must be FOB origin, with a required ship date by January 31, 2027, and the original required delivery date is February 24, 2027. All packaging and labeling must adhere strictly to the referenced military standards, and transportation instructions are governed by DLAD Proc Notes C19 and C20.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
TRANSMITTER, LIQUID
Solicitation # SPE4A5-26-T-322G
This contract specifies the procurement of a liquid quantity transmitter, identified by NSN 6680-01-208-5644 and part number 42234 from SETRA SYSTEMS, INC., under solicitation SPE4A5-26-T-322G. A total of two units are required to be delivered FOB origin within 171 days, with delivery addressed to the DLA Distribution facility in New Cumberland, Pennsylvania. Strict packaging compliance is mandated per MIL-STD-2073-1E and DLA packaging requirements, including special marking for delicate instrument handling and prohibition of mercury or mercury compounds in preservation, packaging, and marking. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and unspecified attributes are treated as major. The product must not contain intentional mercury except in approved functional components such as batteries or sensors as defined by NAVSEA, and portable fluorescent lamps must be shockproof with secondary containment. Configuration changes require formal engineering change proposals, and deviation requests must be submitted with offers. All technical and quality requirements are drawn from the DLA Master List of Technical and Quality Requirements, and cybersecurity compliance is enforced through CMMC Level 2 self-assessment. Only approved sources are acceptable, and non-cited offerors must obtain source approval from the design control activity prior to submission. The unit of issue is EA, with a total price of $2.00 per unit, and the contract includes zero variance tolerance on quantity.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
SWITCH, LIQUID LEVEL
Solicitation # SPE4A5-26-T-323J
This contract specifies the procurement of 25 units of a liquid level switch with NSN 6680-01-356-5927 and part number DE5-60 from INSINGER MACHINE CO, under solicitation SPE4A5-26-T-323J. Delivery is required within 171 days to the destination warehouse in Tracy, California, with FOB origin terms and no tolerance for quantity variance. The items must comply with stringent packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking codes applied. All packaging and handling must adhere to DLA’s packaging requirements, and the use of mercury or mercury-containing compounds is strictly prohibited in preservation, packaging, and marking processes, except for approved functional components like batteries or sensors as specified by NAVSEA. Portable devices containing mercury must include a secondary containment and be shockproof in accordance with NAVSEA 5100-003D. Sampling and inspection follow zero-defect criteria per MIL-STD-1916 or equivalent zero-based plans, with critical, major, and minor attributes assigned verification levels or AQLs as defined. Inspection and acceptance occur at the destination, and the contract enforces strict compliance with all referenced DLA technical and quality requirements incorporated by reference from the DLA Master List. The required delivery date is January 18, 2027, with a need ship date of January 31, 2027, and all transportation protocols must follow DLAD Proc Notes C19 and C20.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
BEZEL, INSTRUMENT MOUNT
Solicitation # SPE4A5-26-T-327L
The contract pertains to the procurement of a Bezel, Instrument Mounting with NSN 6695-01-122-7941 and part number AM11085, manufactured by ONTIC ENGINEERING & MANUFACTURING UK, under solicitation SPE4A5-26-T-327L. A total of 47 units are required, split into two line items: eight units destined for San Diego, California, and thirty-nine units for Jacksonville, Florida. Delivery is due within 153 days from the contract award, with FOB origin terms and a strict zero variance tolerance on quantities. Inspection and acceptance are to occur at the destination, and all items must comply with MIL-STD-2073-1E packaging standards, MIL-STD-129 marking requirements, and DLA packaging guidelines, with no special marking needed. Unit identification is not mandated per customer request, and Item Unique Identification under DFARS 252.211-7003 does not apply. The product is classified as a critical application item, and all manufacturing and inspection must adhere to MIL-STD-1916 or an equivalent zero-based sampling plan with verification levels assigned as VII for critical, IV for major, and II for minor attributes. Cybersecurity Maturity Model Certification Level 2 self-assessment is required, and source approval documentation must be submitted. Measuring and test equipment used must meet specified standards, and all shipments must follow DLA transportation protocols outlined in proc notes C19 and C20. A need ship date of January 13, 2027, is specified, with the original delivery deadline set for November 7, 2027.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
TRANSDUCER, MOTIONAL
Solicitation # SPE4A5-26-T-324P
The contract is for the procurement of 12 units of a Transducer, Motional Pickup with NSN 6695-01-376-5933 under solicitation SPE4A5-26-T-324P, issued by the Department of Defense through the ASC Supplier Oper OEM Division. The requirement is set aside exclusively for small businesses under the SBA Total Small Business Set-Aside program, with a NAICS code of 334519. Delivery is required within 22 days of award, and the place of performance is Cherry Point, North Carolina, with a zip code of 28533-5040. The solicitation was posted on August 4, 2026, with responses due by August 12, 2026, and the point of contact is Aprile Corley, reachable via email and phone provided. The technical specifications and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the DLA eProcurement website, with the controlling revision determined by the solicitation issue or award date depending on the acquisition size. The item includes technical data subject to export controls under either ITAR or EAR, prohibiting any export or disclosure to foreign persons without prior authorization from the Department of State or Commerce, and applies to all employees and subsidiaries regardless of nationality. Only DLA contractors with approved US/Canada Joint Certification Program status, completed mandatory training on handling export-controlled data, and formal DLA approval are permitted access. Additionally, government identification must be removed from non-accepted supplies, and DFARS 252.225-7048 applies to all related technical data handling.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
INDICATOR, SYMBOL IN
Solicitation # SPE4A5-26-T-321Q
The contract pertains to the procurement of five units of an indicator symbol component identified by NSN 6695009286331, with a unit price of $5.00 and a total contract value of $25.00. Delivery is required within 171 days to the destination in Tracy, California, under FOB origin terms, with no variance permitted in quantity. The item must comply with extensive technical and quality requirements referenced through R and I identifiers from the DLA Master List of Technical and Quality Requirements, including specific qualification standards for components governed by Qualified Products Lists or Qualified Manufacturers Lists, which mandate that only approved sources be used. Packaging must adhere strictly to MIL-STD-2073-1E and MIL-STD-129, with special marking indicating the item is a delicate instrument, and palletization must follow DLA Packaging Requirements. Sampling procedures are mandated to follow MIL-STD-1916 or ASQ H1331, with zero non-conformances required unless otherwise specified, and verification levels assigned per critical, major, and minor attributes. The manufacturer is required to meet specifications MIL-DTL-6839F and MS27403, and the component must originate from Aircraft Instruments Company, listed as the qualified source. The contract includes detailed shipping and delivery instructions, with freight directed to a specific DLA warehouse, and requires compliance with DLA procedural notes for transportation. The solicitation was issued on August 4, 2026, with responses due by August 12, 2026, and the original delivery target is March 24, 2027, though a need ship date of January 31, 2027, is specified.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
TRANSDUCER, MOTIONAL PI
Solicitation # SPE4A5-26-T-325V
This contract pertains to the procurement of a Transducer, Motional Pickup with NSN 6695-01-718-0130 and part number 23053503-2, supplied by approved vendors including Rolls-Royce Corporation, General Tool Company, and Ametek Inc. A quantity of eight units is required, to be delivered FOB origin within 66 days of contract award with no variance allowed in quantity. The item is classified as a critical application item, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with compliance tied to the revision in effect on the solicitation or award date. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances accepted unless otherwise directed, and unspecified attributes are treated as major. Strict prohibitions apply to mercury or mercury-containing compounds in any hardware, preservation, packaging, or marking, except for specific functional uses such as batteries, fluorescent lights, or instrument controls as authorized by NAVSEA, with additional containment requirements for portable items. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 marking standards, with palletization conforming to DLA packaging guidelines and no mercury permitted in preservation methods. Delivery is to DLA San Joaquin Distribution Center in Tracy, California, with inspection and acceptance occurring at destination. The contract was issued as a Women-Owned Small Business Set-Aside under NAICS code 334519, with a response deadline of August 12, 2026, and a required ship date of October 18, 2026, and original delivery date of January 31, 2027.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
COUNTER, ROTATING
Solicitation # SPE4A5-26-T-321M
The contract is for four rotating counters with NSN 6680-00-907-0737 under solicitation SPE4A5-26-T-321M, classified as a total small business set-aside with a NAICS code of 334519. The item is subject to Cybersecurity Maturity Model Certification (CMMC) Level 2 requirements and must be supplied by a certified third-party assessment organization. Physical identification or bare item marking is required, and the contract incorporates technical and quality provisions referenced in the DLA Master List of Technical and Quality Requirements. The product is covered under DFARS 252.211-7003(c)(1)(i), meaning item unique identification is not mandated per the service customer’s request, but tailored higher-level quality requirements apply to both manufacturers and non-manufacturers, including inspection and acceptance at origin. Government identification must be removed from non-accepted supplies, and packaging must comply with DLA standards. Technical data associated with this item is controlled under either ITAR or EAR, prohibiting unauthorized export or disclosure to foreign persons regardless of location, including foreign national employees or subsidiaries of U.S. companies. Compliance with DFARS 252.225-7048 is mandatory, and access to controlled data is restricted to contractors who hold a valid U.S./Canada Joint Certification Program certification, have completed required DOD export control training, and have been formally approved by DLA. The delivery requirement is set for 171 days after date of order, with performance located in New Cumberland, Pennsylvania. The solicitation was posted on August 4, 2026, with responses due by August 12, 2026. Primary point of contact is Hien-Van Trinh of the Department of Defense’s ASC Supplier Operations OEM Division.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
TRANSMITTER, PRESSURE
Solicitation # SPE4A6-26-T-11TY
The contract is for a pressure transmitter under NSN 6685010898038 and part number 04477-01, with a quantity of 13 units to be delivered FOB origin in 171 days. The item is classified as a critical application item, and delivery must comply with DLA packaging requirements per MIL-STD-2073-1E and MIL-STD-129 marking standards, with no special marking required. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1 using a zero-defect acceptance criterion unless otherwise stated, and unspecified attributes are treated as major with an AQL of 1.0. The supplier must meet tailored quality requirements and comply with documentation standards for source approval and inspection at origin. Cybersecurity requirements mandate a CMMC Level 2 self-assessment, and the item has no shelf life restriction. All technical and quality specifications referenced via R- and I-numbers are governed by the DLA Master List, with the revision effective on the solicitation issue date controlling. The contract is issued under solicitation SPE4A6-26-T-11TY, awarded to Sensor Systems, L.L.C. and General Dynamics Motion Control LLC, with a unit price of $13.00 and total contract value of $169.00. Deliveries must be sent to DLA Distribution Warner Robins at Robins AFB, Georgia. The required delivery date is October 16, 2027, though a need ship date of January 31, 2027, indicates urgency. Transportation is governed by DLA procedural notes C19 and C20. The item uses the DoD unit of issue EA and falls under NAICS code 334519. Compliance with all referenced technical, quality, packaging, and cybersecurity standards is mandatory, and non-conforming supplies must have government identification removed. The point of contact for the contract is Shameka Edwards of the ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 332119
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A5-26-T-328Q
The contract is for the procurement of two BUSHING, SLEEVE items with NSN 5365-01-729-5733 and part number BACB28AP12Z059, issued under solicitation SPE4A5-26-T-328Q. Delivery is required within 127 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB origin terms and no variance allowed in quantity. The item is classified as a critical application component for Boeing and must comply with stringent technical and quality requirements referenced from the DLA Master List, including configuration change management, supply chain traceability per DLA Procurement Note C03, and FAA-specific provisions such as bare item marking and airworthiness certification. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with preservation methods specified for dry conditioning and no special marking required. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances mandated unless otherwise stated, and attributes are assigned verification levels or AQLs based on criticality. The supplier must retain supply chain documentation and ensure all materials meet FAA airworthiness standards, as outlined in DFARS 252.211-7003, despite the absence of unique identification requirements. Transportation and shipping logistics are governed by DLA Procurement Notes C19 and C20, and all documentation must align with the Technical Data Package and associated Contract Data Requirements Lists. The item is subject to the DLA Packaging Requirements and must be delivered on or before December 18, 2026. The contract includes mandatory compliance with quality assurance provisions, and nonconforming supplies must be processed per RQ011 guidelines regarding removal of government identification. All technical specifications referenced are incorporated by link to the DLA eProcurement portal, and the procurement is conducted under the DoD-authorized unit of issue with a unit price and total price specified for the two-piece order.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332999
New
DIBBS
SHIM
Solicitation # SPE4A5-26-T-323P
The contract pertains to the procurement of five units of a specific shim identified by NSN 5365-01-493-6230 and part number 212-011-731-101, supplied by BELL TEXTRON INC with CAGE code 97499. Delivery is required FOB origin within 171 days of contract award, with no tolerance for quantity variance. Inspection and acceptance both occur at the destination facility. Packaging must comply with MIL-STD-2073-1E, including specified preservation methods, materials, and unit containers, while marking adheres strictly to MIL-STD-129 and DLA packaging requirements, with no special marking codes applied. Unit identification is not required per customer request under DFARS 252.211-7003(c)(1)(i). Acceptable sampling follows Sikorsky Corporation’s Alternate Sampling Plan QAP 1201, which must meet or exceed ASQ H1331 or MIL-STD-1916 standards. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the same address used for freight shipping. The required ship date is January 31, 2027, with an original delivery requirement of October 15, 2027. Technical and quality requirements referenced are governed by the DLA Master List, with applicable revisions determined by the solicitation or award date depending on acquisition scale. The contract is issued under solicitation SPE4A5-26-T-323P, with a unit price of $5.00 per piece for a total value of $25.00.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
WIRE ROPE ASSEMBLY,
Solicitation # SPE4A5-26-T-325N
The contract is for the procurement of 20 single-leg wire rope assemblies with NSN 4010-01-611-5048 and part number 6898106-107, supplied by Mazzeolla Lifting Technologies, Inc. Delivery is required FOB origin within 171 days, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, and marking must adhere to MIL-STD-129 without any special codes. Palletization follows DLA standards, and preservation methods are strictly controlled with no mercury or mercury-containing compounds permitted in preservation, packaging, or marking materials. The item must meet all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, applying zero non-conformances unless otherwise stipulated. Mercury is prohibited except in specified exempted applications such as batteries, fluorescent lights, and certain instruments, with portable mercury-containing devices requiring shockproof design and a secondary containment barrier. All deliveries must be sent to the DLA Distribution facility in New Cumberland, PA, and the contract is subject to transportation guidelines outlined in DLAD Proc Notes C19 and C20. The original required delivery date is May 30, 2027, with a needed ship date of January 31, 2027. The solicitation, issued under SPE4A5-26-T-325N, was posted August 4, 2026, with a response deadline of August 12, 2026, and falls under NAICS code 332618 as a federal procurement managed by the Department of Defense’s ASC Supplier Oper OEM Division.
Other Fabricated Wire Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
STAKE, GUY
Solicitation # SPE4A5-26-T-326K
STAKE, GUY is a procurement contract issued by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION under solicitation number SPE4A5-26-T-326K, requiring delivery of 67 units of item NSN 4030-01-710-7034 with a unit price of $67.00, totaling $4,489. The contract mandates strict adherence to DLA’s Master List of Technical and Quality Requirements, which override any conflicting standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, with all items palletized and labeled according to specified guidelines. Inspection and acceptance occur at the destination, with no variance allowed in quantity. Delivery is due within 171 days of award, with an original required delivery date of March 30, 2027, and a needed ship date of January 31, 2027. The item must be delivered FOB origin to the receiving warehouse in Tracy, California, with transportation governed by DLAD PROC NOTES C19 and C20. The contract enforces a zero-defect sampling standard, requiring compliance with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes must be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively, and any unspecified attributes are treated as major. Acceptance requires zero non-conformances unless otherwise directed. Cybersecurity requirements mandate a CMMC Level 2 Self-Assessment, and all government identification must be removed from non-accepted supplies. The seller is subject to all DLA directives, including unit of issue specifications and packaging standards, with no exceptions permitted. Contract performance is monitored via the point of contact Hien-Van Trinh, and all documentation must reference the authorized DLA unit of issue as defined in official DoD guidelines.
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
STAND, COMPRESSED GA
Solicitation # SPE4A5-26-T-325J
The contract is for the procurement of 18 units of a commercial off-the-shelf stand designed for compressed gas cylinders, identified by part number G-600 and NSN 4920-01-587-5435, sourced from First Safety Corporation Inc. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which take precedence over ASTM D3951 packaging standards. Packaging and labeling must follow MIL-STD-129, and palletization must adhere to DLA Packaging Requirements for Procurement (RP001). Delivery is FOB origin with a 171-day lead time, and inspection and acceptance occur at the destination. The quantity is fixed with no variance allowed. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the required ship date set for January 31, 2027, and the original delivery date as July 24, 2027. Each unit is priced at $18.00, totaling $324.00 for the order, under contract SPE4A5-26-T-325J. Transportation details are governed by DLAD Proc Notes C19 and C20, and the unit of issue is each (EA). All government identification must be removed from non-accepted supplies, and compliance with the DLA Master List controls the applicable revision level based on the solicitation or award date.
Other Electronic Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334513
New
DIBBS
THERMOMETER, SELF-IN
Solicitation # SPE4A5-26-T-325E
The contract concerns the procurement of six self-injecting thermometers with NSN 6685-01-643-7750 under solicitation SPE4A5-26-T-325E, issued by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION. Delivery is required FOB origin within 171 days of award, with a firm delivery deadline of January 31, 2027, and no variance permitted in quantity. All units must comply with DLA’s technical and quality requirements referenced in the DLA Master List, including sampling protocols aligned with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes must be verified at levels VII, IV, and II or corresponding AQLs of 0.1, 1.0, and 4.0. Zero non-conformances are required in sampled lots unless otherwise specified. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129 with the special marking code 05 indicating a delicate instrument, and palletization must conform to DLA packaging standards. The product is labeled as RTEMP INSTRUMENT CORPORATION P/N B4T6QPX2256X-C3TSVB and requires no government identification removal. The shipment must be sent to the specified receiving warehouse in Tracy, California, following DLA transportation notes C19 and C20, and packaging must comply with hazardous materials standards where applicable. The unit price is $6.00 per unit, totaling $36.00, with all terms governing inspection and acceptance occurring at the destination.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, PLATE
Solicitation # SPE4A5-26-T-328K
The contract pertains to the procurement of 24 plain plate nuts with NSN 5310-00-241-0092 under solicitation SPE4A5-26-T-328K, issued by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION. Delivery is required within 115 days after award, with responses due by August 12, 2026. The item has no shelf life requirement and does not require Unique Item Identification as specified by the Service customer, in accordance with DFARS 252.211-7003(c)(1)(i). Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless superseded by an amendment. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Inspection and acceptance occur at origin, and government identification must be removed from non-accepted supplies. Bare items must be physically marked according to RQ017, and measuring and test equipment used must meet specified standards. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are treated as major. Zero non-conformances are required unless otherwise stated. Data supporting this procurement is deemed proprietary or insufficient for competitive bidding. The place of performance is Cherry Point, North Carolina, 28533-5040, with Jaelyn Buford listed as the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
BATTERY CHARGER, AIR
Solicitation # SPE4A5-26-T-326V
The contract is for the procurement of six battery chargers, air model, identified by NSN 4920-01-498-2543 and part numbers 4159-MIL and CA 1550 MIL from Lamar Technologies LLC, with delivery required within 171 days under a total small business set-aside. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, and packaging must comply with MIL-STD-129 and DLA Packaging Requirements, including palletization per RP001. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are classified with verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. The item is designated as a critical application requiring strict configuration control and physical identification, and non-approved sources must obtain source approval from the design control activity with technical data packages submitted with their offer. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at destination. The purchase request number is 7017739882, unit of issue is EA, quantity is fixed at six units with zero variance allowed, and the required delivery date is January 31, 2027, with an original target of January 26, 2027. All markings, labeling, and documentation must adhere to applicable DoD and DLA directives, and transportation follows DLAD procedural notes C19 and C20.
Other Electronic Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334514
New
DIBBS
TRANSMITTER, LIQUID QUA
Solicitation # SPE4A5-26-T-325X
The contract specifies the procurement of four liquid quantity transmitters under solicitation SPE4A5-26-T-325X, with a delivery deadline of 171 days after order. The item, identified by NSN 6680-01-666-8749, is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Packaging, identification, and documentation must comply with specific DLA standards including RP001, RQ011, RQ017, and RC001, while sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated. Configuration changes require formal engineering change proposal procedures, and cybersecurity compliance mandates CMMC Level 2 certification for third-party assessors. Technical data associated with the item is subject to ITAR or EAR export controls, prohibiting unauthorized disclosure to foreign persons regardless of location, with distribution restricted to contractors who hold US/Canada Joint Certification Program status, have completed mandatory DLA training, and received explicit approval. Item Unique Identification is waived per customer request under DFARS 252.211-7003(c)(1)(i). The contract is managed by the Department of Defense’s ASC Supplier Oper OEM Division, with performance located in New Cumberland, Pennsylvania, and primary point of contact Hien-Van Trinh.
Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, SHEET SPRING
Solicitation # SPE4A5-26-T-323A
This contract is for the procurement of 951 units of a nut, sheet spring, identified as a commercial off-the-shelf item under part number 03A111-3-1 and its alternate variants including 13100009-1 and 132A11144-7-3, sourced from multiple approved suppliers such as Northrop Grumman Systems Corporation, Republic Fastener Mfg. Corp., GE Engine Services Distribution, LLC, STE MRAS, LLC, and The Monadnock Company. The item is classified as a critical application component and is not required to have unique item identification, in accordance with DFARS 252.211-7003(c)(1)(i). The National Stock Number is 5310-01-331-8030, with a unit price of $951.00, resulting in a total contract value based on the agreed quantity. Delivery is required within 171 days, with shipment to be made FOB origin under strict packaging standards including MIL-STD-2073-1E and MIL-STD-129 marking requirements, and palletization per DLA’s RP001 packaging guidelines. The item is designated for delivery to the DLA Distribution Depot in Tinker AFB, Oklahoma, with no tolerance for quantity variance. The contract does not require special marking and mandates that all units be packaged and labeled in full compliance with federal packaging and transportation regulations. The procurement is part of a HUBZone Set-Aside solicitation, with the NAICS code 332722 indicating manufacturing of screw, nut, and bolt products. The ordering activity is the ASC Supplier Oper OEM Division under the Department of Defense, with the solicitation issued under reference SPE4A5-26-T-323A. The original required delivery date is August 16, 2027, with a need ship date of January 31, 2027, and the point of contact for logistics inquiries is Donetta Nelson. Transportation logistics follow DLA Procurement Notes C19 and C20, and all units must be delivered in accordance with the DoD-authorized unit of issue as defined in the official DLA documentation.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details