6640--Upright Microscope

(i) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; offers are being requested and a written solicitation will not be issued. (ii) The solicitation number 36C26224Q1660 is issued as a Request for Quotation (RFQ). (iii) The provisions and clauses in this document are in effect through the Federal Acquisition Circular. (iv) This solicitation is set aside for all Service-Disabled Veteran-Owned Small Businesses (SDVOSB) using NAICS Code 339112 having a size standard of 1000 employees. This solicitation is for a brand name or equal. FORMATTING: All Solicitations SHALL include the following statement: 501 - 36C26224Q1660 Upright Microscope Quotes shall provide the following information. Quotes received without this information will be marked as non-responsive. Your quote should include the standard delivery cost for shipment of the all the items and any installation as all inclusive (if required). Quotes shall be submitted on company letterhead as a single document. No other documents or information shall be attached to the quote. Company Name: Address: Phone Number: Point of Contact: Name: Email: Phone Number: SAM Unique Entity ID If applicable, provide your company FSS contract number Company Business Size (Large, SDVOSB, Small, etc.) Firm Delivery date/time frame. Separate documents (Required) Provide an authorized distributor/reseller letter for the items Submit your capabilities Statement (v) Product Information: Brand name items are listed solely for a comparison for the brand name or equal Purchase Request. Brand name Information: Manufacturer & Part Number: Olympus - DP74 Type: Upright microscope Possible Capabilities: Diagnostic microscopes Equal to product Information: Main component: Upright microscope Possible Capabilities: Diagnostic microscopes BX53F2--1--2 1. Upright microscope frame. 5--UR730 2 ARM;TRANSMITTED LIGHT ARM 2 EA U--LHLEDC100--1--2 3 High intensity LED lamp for microscope 2 EA systems , approximately 50,000--hour lifespan UYCP--11 4 US Style 3--prong Power Cord 4 EA 6--U1218 5 STRAIN FREE SWING CONDENSER, 2 EA NA 0.9/0.17, 1.25X-- 100X COVERAGE U--D7RES--1--2 6 7--Position coded nosepiece Frames, 2 EA includes slot for DIC prism 1--U2B921 7 PLAN APO 2X OBJECTIVE, 2 EA NA 0.08,WD 6.2MM 1--U2B5222 8 U Plan Fluorite 4X Objective, 2 EA NA 0.13, WD 17MM 1--U2B5242 9 U Plan Fluorite 10X Objective, 2 EA NA 0.3, WD 10MM 1--U2B5252 10 U Plan Fluorite 20X Objective, 2 EA NA 0.5, WD 2.1MM 1--U2B5272 11 U Plan Fluorite 40X Objective, 2 EA Objective, NA 0.75, WD 0.51MM 1--U2B5322 12 U Plan Fluorite 60X Oil Objective, 2 EA Oil Objective, NA 1.25-- 0.65,WD 0.12 1--U2B53522 13 U Plan Fluorite 1 00X Oil Objective, 2 EA 00X Oil Objective, NA 1.30,WD 0.20MM 4--U130 14 RIGHT HAND MECHANICAL STAGE, 2 EA RACKLESS, LONG STALK 4--U146 15 LEFT RELEASE SINGLE SLIDE HOLDER, THICK 2 EA BX3--SHEA--1--2 16 Stage Handle Extension Adapter for 2 EA Manual Stages, 2 Parts 4--U157 17 RUBBER CAPS F/BX CONTROL KNOBS,THICK, 2 EA SET OF 2 3--U137 18 TILTING BINOCULAR OBS TUBE, 5 2 EA 35 DEG, REVERSE WHN10X--H--1--8 19 Eyepiece, 10x Focusing w/ 4 EA F=24mm t=1.5mm Retical Shelf, FN22 WHN10X--1--8 20 Eyepiece, 10x w/ F=24mm 4 EA t=1.5mm Retical Shelf, FN22 U--DO3--1--7 21 Dual Observation Attachment for Front 2 EA -to-Back Viewing with Built-In LED Pointer 3--U234 22 TRINOC,OBSERV.TUBE 2 EA 100:0,80:20,0:100% POSITIONS U--P115 23 ANALYZER FOR TRANSMITTED LIGHT 2 EA FITS IN NOSEPI SLIDER U--POT 24 Polarizer For Transmitted Light, 2 EA 45mm Diameter, Fits in Light Well OMT--010--B 25 Cloth dust cover (No Logo). 2 EA 11X25X26, Anti-Static for BX, IX Z--81226 26 Immersion Oil, 30CC with SDS 2 EA C--0100 27 LENS PAPER; LENS CLEANING 4 BX TISSUE,100 SHEETS TOTAL COST: $ (vi) The US Government, Veterans Affairs (VA) seeks to make a procurement for 2 Ea Upright microscope including delivery. Offeror quotations must demonstrate meeting the salient physical, functional, or performance characteristics specified in this solicitation, otherwise it will be considered non-responsive. The technical specifications for this requirement are listed for Brand Name or Equal per FAR 52.211-6. The information identified provided is intended to be descriptive, not restrictive and to indicate the quality that will be satisfactory. The interested parties bear full responsibility to ensure their submission demonstrates to the government that they can provide the brand name or equal to supplies being requested. Statement of Work 1. Background. The VA Albuquerque Healthcare System has a requirement to acquire for 2 Ea Upright microscope including delivery. 2. Scope. The vendor is to deliver all items as required per this solicitation. 3. Place of Delivery Department of Veterans Affairs VA Albuquerque Healthcare System 1501 San Pedro Dr SE, Albuquerque, NM 87108 4. Period of Performance/Delivery Timeframe Deliver all items on or before 90 Days ARO. Salient Characteristics (Brand name or equal) (Must be compatible with Olympus - DP74 1. Quote must include all 27 Line Items; Upright Microscope plus accessories 2. Microscopes must be compatible with the microscope camera CellSens software for model Olympus DP74, which is the only model in use at the VA Albuquerque Laboratory. a. CellSens Software is installed and in use on all VA Albuquerque laboratory microscopes. 3. Microscope shall provide: a. Front mounted intensity control dial. b. Light Intensity Manager (LIM) ON/OFF button and Preset button. (LIM is an industry term) c. Coarse and fine coaxial focus control knobs graduated to 1 micron, 25mm total focus stroke at 0.1mm per fine rotation and 15 mm per coarse rotation d. Coarse focus tension shall be adjustable and includes a focus stop. 4. Must be compatible with microscope hard drive HP Z2 (viii) The provision at 52.212-1, Instructions to Offerors Commercial Items, applies to this solicitation. FAR 52.212-1 Addendum: All offeror quotes for this solicitation must be received electronically through email no later than 08/07/2024, 4:00 PM PST. Any offeror quotes received after the prescribed date/time shall be considered late, marked as non-responsive and will not be considered for award. All questions regarding this solicitation must be received electronically through email no later than 08/05/2024, 4:00 PM PST. Offers and Questions shall be sent by email to John Harrison at contact@example.gov (ix) The provision at FAR 52.212-2, Evaluation -- Commercial Items (Oct 2014), applies to this solicitation. FAR 52.212-2 Addendum / Replacement: (a) The Government will award a contract resulting from this solicitation to the responsive and responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: Technical acceptability shall be established by review of each submitted quote, attachments, and/or information by the designated technical evaluator/s and verification that any brand name or equal to items" at a minimum meet the Salient Characteristics outlined in section Salient Characteristics of this solicitation. No other rating or quantitative value other than acceptable or unacceptable will be assigned. Award will be made to the offer that meets all minimum requirements and provides the lowest price. Acceptability of equipment/services shall be established by review of each submitted quotation by the designated evaluator(s) and verification that any equal-to items meet the Statement of Work/salient characteristics included in this solicitation. Submissions to this solicitation must show clear, compelling, and convincing evidence that equal-to items meet Statement of Work/ salient characteristics. Offers that include any items that are not determined as Brand Name or Equal shall result in an unacceptable offer. See 52.211-6 Brand Name or Equal for additional information. FAR 52.211-6 Brand Name or Equal (Aug 1999) (a) If an item in this solicitation is identified as "brand name or equal," the purchase description reflects the characteristics and level of quality that will satisfy the Government s needs. The salient physical, functional, or performance characteristics that "equal" products must meet are specified in the solicitation. (b) To be considered for award, offers of "equal" products, including "equal" products of the brand name manufacturer, must- (1) Meet the salient physical, functional, or performance characteristic specified in this solicitation; (2) Clearly identify the item by- (i) Brand name, if any; and (ii) Make or model number; (3) Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and (4) Clearly describe any modifications the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modifications. (c) The Contracting Officer will evaluate "equal" products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer. (d) Unless the offeror clearly indicates in its offer that the product being offered is an "equal" product, the offeror shall provide the brand name product referenced in the solicitation. (End of provision) (b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s). (c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified with a minimum of at least sixty days, shall result in a binding contract without further action by either party. Before the offer s specified expiration time, the Government may accept an offer (or part of an offer), whether there are negotiations after its receipt, unless a written notice of withdrawal is received before award. (End of Provision) (x) Must include a completed copy of the provision at 52.212-3 -- Offeror Representations and Certifications -- Commercial Items, with this solicitation or ensure SAM.gov is updated with current information. (xi) The clause at 52.212-4, Contract Terms and Conditions -- Commercial Items, applies to this acquisition. Authorized Distributor Letter (ADL) Any suppliers, distributors and/or resellers who participate in this solicitation, must be authorized to provide the supplies by the Original Equipment Manufacturer (OEM). An Authorized Distributor Letter (ADL) from the manufacturer shall be included with your response to be considered for award. If the potential Authorized Supplier is not the OEM, the Authorized Supplier must provide an Authorized Distributor Letter from the OEM signed within the last 90 days. The letter must either state specific product(s) quoted or that the quoter is an authorized distributor for all of the manufacturer s products. This letter must be on the manufacturer s letterhead and contain the signature of an authorized official for the manufacturer. 52.212-4 CONTRACT TERMS AND CONDITIONS COMMERCIAL ITEMS (OCT 2018) (a) Inspection/Acceptance. The Contractor shall only tender for acceptance those items that conform to the requirements of this contract. The Government reserves the right to inspect or test any supplies or services that have been tendered for acceptance. The Government may require repair or replacement of nonconforming supplies or reperformance of nonconforming services at no increase in contract price. If repair/replacement or reperformance will not correct the defects or is not possible, the Government may seek an equitable price reduction or adequate consideration for acceptance of nonconforming supplies or services. The Government must exercise its post-acceptance rights (1) Within a reasonable time after the defect was discovered or should have been discovered; and (2) Before any substantial change occurs in the condition of the item unless the change is due to the defect in the item. (b) Assignment. The Contractor or its assignee may assign its rights to receive payment due as a result of performance of this contract to a bank, trust company, or other financing institution, including any Federal lending agency in accordance with the Assignment of Claims Act (31 U.S.C. 3727). However, when a third party makes payment (e.g., use of the Governmentwide commercial purchase card), the Contractor may not assign its rights to receive payment under this contract. (c) Changes. Changes in the terms and conditions of this contract may be made only by written agreement of the parties. (d) Disputes. This contract is subject to 41 U.S.C. chapter 71, Contract Disputes. Failure of the parties to this contract to reach agreement on any request for equitable adjustment, claim, appeal or action arising under or relating to this contract shall be a dispute to be resolved in accordance with the clause at FAR 52.233-1, Disputes, which is incorporated herein by reference. The Contractor shall proceed diligently with performance of this contract, pending final resolution of any dispute arising under the contract. (e) Definitions. The clause at FAR 52.202-1, Definitions, is incorporated herein by reference. (f) Excusable delays. The Contractor shall be liable for default unless nonperformance is caused by an occurrence beyond the reasonable control of the Contractor and without its fault or negligence such as, acts of God or the public enemy, acts of the Government in either its sovereign or contractual capacity, fires, floods, epidemics, quarantine restrictions, strikes, unusually severe weather, and delays of common carriers. The Contractor shall notify the Contracting Officer in writing as soon as it is reasonably possible after the commencement of any excusable delay, setting forth the full particulars in connection therewith, shall remedy such occurrence with all reasonable dispatch, and shall promptly give written notice to the Contracting Officer of the cessation of such occurrence. (g) Invoice. (1) The Contractor shall submit an original invoice and three copies (or electronic invoice, if authorized) to the address designated in the contract to receive invoices. An invoice must include (i) Name and address of the Contractor; (ii) Invoice date and number; (iii) Contract number, line-item number and, if applicable, the order number; (iv) Description, quantity, unit of measure, unit price and extended price of the items delivered; (v) Shipping number and date of shipment, including the bill of lading number and weight of shipment if shipped on Government bill of lading; (vi) Terms of any discount for prompt payment offered; (vii) Name and address of official to whom payment is to be sent; (viii) Name, title, and phone number of person to notify in event of defective invoice; and (ix) Taxpayer Identification Number (TIN). The Contractor shall include its TIN on the invoice only if required elsewhere in this contract. (x) Electronic funds transfer (EFT) banking information. (A) The Contractor shall include EFT banking information on the invoice only if required elsewhere in this contract. (B) If EFT banking information is not required to be on the invoice, in order for the invoice to be a proper invoice, the Contractor shall have submitted correct EFT banking information in accordance with the applicable solicitation provision, contract clause (e.g., 52.232-33, Payment by Electronic Funds Transfer System for Award Management, or 52.232-34, Payment by Electronic Funds Transfer Other Than System for Award Management), or applicable agency procedures. (C) EFT banking information is not required if the Government waived the requirement to pay by EFT. (2) Invoices will be handled in accordance with the Prompt Payment Act (31 U.S.C. 3903) and Office of Management and Budget (OMB) prompt payment regulations at 5 CFR part 1315. (h) Patent indemnity. The Contractor shall indemnify the Government and its officers, employees and agents against liability, including costs, for actual or alleged direct or contributory infringement of, or inducement to infringe, any United States or foreign patent, trademark or copyright, arising out of the performance of this contract, provided the Contractor is reasonably notified of such claims and proceedings. (i) Payment. (1) Items accepted. Payment shall be made for items accepted by the Government that have been delivered to the delivery destinations set forth in this contract. (2) Prompt payment. The Government will make payment in accordance with the Prompt Payment Act (31 U.S.C. 3903) and prompt payment regulations at 5 CFR part 1315. (3) Electronic Funds Transfer (EFT). If the Government makes payment by EFT, see 52.212-5(b) for the appropriate EFT clause. (4) Discount. In connection with any discount offered for early payment, time shall be computed from the date of the invoice. For the purpose of computing the discount earned, payment shall be considered to have been made on the date which appears on the payment check or the specified payment date if an electronic funds transfer payment is made. (5) Overpayments. If the Contractor becomes aware of a duplicate contract financing or invoice payment or that the Government has otherwise overpaid on a contract financing or invoice payment, the Contractor shall (i) Remit the overpayment amount to the payment office cited in the contract along with a description of the overpayment including the (A) Circumstances of the overpayment (e.g., duplicate payment, erroneous payment, liquidation errors, date(s) of overpayment); (B) Affected contract number and delivery order number, if applicable; (C) Affected line item or subline item, if applicable; and (D) Contractor point of contact. (ii) Provide a copy of the remittance and supporting documentation to the Contracting Officer. (6) Interest. (i) All amounts that become payable by the Contractor to the Government under this contract shall bear simple interest from the date due until paid unless paid within 30 days of becoming due. The interest rate shall be the interest rate established by the Secretary of the Treasury as provided in 41 U.S.C. 7109, which is applicable to the period in which the amount becomes due, as provided in (i)(6)(v) of this clause, and then at the rate applicable for each six-month period as fixed by the Secretary until the amount is paid. (ii) The Government may issue a demand for payment to the Contractor upon finding a debt is due under the contract. (iii) Final decisions. The Contracting Officer will issue a final decision as required by 33.211 if (A) The Contracting Officer and the Contractor are unable to reach agreement on the existence or amount of a debt within 30 days; (B) The Contractor fails to liquidate a debt previously demanded by the Contracting Officer within the timeline specified in the demand for payment unless the amounts were not repaid because the Contractor has requested an installment payment agreement; or (C) The Contractor requests a deferment of collection on a debt previously demanded by the Contracting Officer (see 32.607-2). (iv) If a demand for payment was previously issued for the debt, the demand for payment included in the final decision shall identify the same due date as the original demand for payment. (v) Amounts shall be due at the earliest of the following dates: (A) The date fixed under this contract. (B) The date of the first written demand for payment, including any demand for payment resulting from a default termination. (vi) The interest charge shall be computed for the actual number of calendar days involved beginning on the due date and ending on (A) The date on which the designated office receives payment from the Contractor; (B) The date of issuance of a Government check to the Contractor from which an amount otherwise payable has been withheld as a credit against the contract debt; or (C) The date on which an amount withheld and applied to the contract debt would otherwise have become payable to the Contractor. (vii) The interest charge made under this clause may be reduced under the procedures prescribed in 32.608-2 of the Federal Acquisition Regulation in effect on the date of this contract. (j) Risk of loss. Unless the contract specifically provides otherwise, risk of loss or damage to the supplies provided under this contract shall remain with the Contractor until, and shall pass to the Government upon: (1) Delivery of the supplies to a carrier, if transportation is f.o.b. origin; or (2) Delivery of the supplies to the Government at the destination specified in the contract, if transportation is f.o.b. destination. (k) Taxes. The contract price includes all applicable Federal, State, and local taxes and duties. (l) Termination for the Government's convenience. The Government reserves the right to terminate this contract, or any part hereof, for its sole convenience. In the event of such termination, the Contractor shall immediately stop all work hereunder and shall immediately cause any and all of its suppliers and subcontractors to cease work. Subject to the terms of this contract, the Contractor shall be paid a percentage of the contract price reflecting the percentage of the work performed prior to the notice of termination, plus reasonable charges the Contractor can demonstrate to the satisfaction of the Government using its standard record keeping system, have resulted from the termination. The Contractor shall not be required to comply with the cost accounting standards or contract cost principles for this purpose. This paragraph does not give the Government any right to audit the Contractor's records. The Contractor shall not be paid for any work performed or costs incurred which reasonably could have been avoided. (m) Termination for cause. The Government may terminate this contract, or any part hereof, for cause in the event of any default by the Contractor, or if the Contractor fails to comply with any contract terms and conditions, or fails to provide the Government, upon request, with adequate assurances of future performance. In the event of termination for cause, the Government shall not be liable to the Contractor for any amount for supplies or services not accepted, and the Contractor shall be liable to the Government for any and all rights and remedies provided by law. If it is determined that the Government improperly terminated this contract for default, such termination shall be deemed a termination for convenience. (n) Title. Unless specified elsewhere in this contract, title to items furnished under this contract shall pass to the Government upon acceptance, regardless of when or where the Government takes physical possession. (o) Warranty. The Contractor warrants and implies that the items delivered hereunder are merchantable and fit for use for the particular purpose described in this contract. (p) Limitation of liability. Except as otherwise provided by an express warranty, the Contractor will not be liable to the Government for consequential damages resulting from any defect or deficiencies in accepted items. (q) Other compliances. The Contractor shall comply with all applicable Federal, State and local laws, executive orders, rules and regulations applicable to its performance under this contract. (r) Compliance with laws unique to Government contracts. The Contractor agrees to comply with 31 U.S.C. 1352 relating to limitations on the use of appropriated funds to influence certain Federal contracts; 18 U.S.C. 431 relating to officials not to benefit; 40 U.S.C. chapter 37, Contract Work Hours and Safety Standards; 41 U.S.C. chapter 87, Kickbacks; 41 U.S.C. 4712 and 10 U.S.C. 2409 relating to whistleblower protections; 49 U.S.C. 40118, Fly American; and 41 U.S.C. chapter 21 relating to procurement integrity. (s) Order of precedence. Any inconsistencies in this solicitation or contract shall be resolved by giving precedence in the following order: (1) The schedule of supplies/services. (2) The Assignments, Disputes, Payments, Invoice, Other Compliances, Compliance with Laws Unique to Government Contracts, and Unauthorized Obligations paragraphs of this clause; (3) The clause at 52.212-5. (4) Addenda to this solicitation or contract, including any license agreements for computer software. (5) Solicitation provisions if this is a solicitation. (6) Other paragraphs of this clause. (7) The Standard Form 1449. (8) Other documents, exhibits, and attachments (9) The specification. (t) [Reserved] (u) Unauthorized Obligations. (1) Except as stated in paragraph (u)(2) of this clause, when any supply or service acquired under this contract is subject to any End User License Agreement (EULA), Terms of Service (TOS), or similar legal instrument or agreement, that includes any clause requiring the Government to indemnify the Contractor or any person or entity for damages, costs, fees, or any other loss or liability that would create an Anti-Deficiency Act violation (31 U.S.C. 1341), the following shall govern: (i) Any such clause is unenforceable against the Government. (ii) Neither the Government nor any Government authorized end user shall be deemed to have agreed to such clause by virtue of it appearing in the EULA, TOS, or similar legal instrument or agreement. If the EULA, TOS, or similar legal instrument or agreement is invoked through an I agree click box or other comparable mechanism (e.g., click-wrap or browse-wrap agreements), execution does not bind the Government or any Government authorized end user to such clause. (iii) Any such clause is deemed to be stricken from the EULA, TOS, or similar legal instrument or agreement. (2) Paragraph (u)(1) of this clause does not apply to indemnification by the Government that is expressly authorized by statute and specifically authorized under applicable agency regulations and procedures. (v) Incorporation by reference. The Contractor s representations and certifications, including those completed electronically via the System for Award Management (SAM), are incorporated by reference into the contract. (End of Clause) (xii) The clause at 52.212-5, Contract Terms and Conditions Required To Implement Statutes Or Executive Orders -- Commercial Items, applies to this acquisition. 52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS COMMERCIAL ITEMS (JUN 2020) (a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)). (2) 52.204 23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (Jul 2018) (Section 1634 of Pub. L. 115 91). (3) 52.204 25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (AUG 2019) (Section 889(a)(1)(A) of Pub. L. 115 232). (4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (NOV 2015). (5) 52.233-3, Protest After Award (Aug 1996) (31 U.S.C. 3553). (6) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)). (b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: [] (1) 52.203 6, Restrictions on Subcontractor Sales to the Government (JUN 2020), with Alternate I (OCT 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402). [] (2) 52.203 13, Contractor Code of Business Ethics and Conduct (JUN 2020) (41 U.S.C. 3509). [] (3) 52.203 15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (JUN 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.) [] (4) 52.204 10, Reporting Executive Compensation and First-Tier Subcontract Awards (JUN 2020) (Pub. L. 109 282) (31 U.S.C. 6101 note). [] (5) [Reserved] [] (6) 52.204 14, Service Contract Reporting Requirements (OCT 2016) (Pub. L. 111 117, section 743 of Div. C). [] (7) 52.204 15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (OCT 2016) (Pub. L. 111 117, section 743 of Div. C). [] (8) 52.209 6, Protecting the Government s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (JUN 2020) (31 U.S.C. 6101 note). [] (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Oct 2018) (41 U.S.C. 2313). [] (10) [Reserved] [] (11)(i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (MAR 2020) (15 U.S.C. 657a). [] (ii) Alternate I (MAR 2020) of 52.219-3. [X] (12)(i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (MAR 2020) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a). [] (ii) Alternate I (MAR 2020) of 52.219-4. [] (13) [Reserved] [] (14)(i) 52.219-6, Notice of Total Small Business Set-Aside (MAR 2020) (15 U.S.C. 644). [] (ii) Alternate I (MAR 2020). [] (15)(i) 52.219-7, Notice of Partial Small Business Set-Aside (MAR 2020) (15 U.S.C. 644). [] (ii) Alternate I (MAR 2020) of 52.219-7. [] (16) 52.219-8, Utilization of Small Business Concerns (Oct 2018) (15 U.S.C. 637(d)(2) and (3)). [] (17)(i) 52.219 9, Small Business Subcontracting Plan (JUN 2020) (15 U.S.C. 637(d)(4)). [] (ii) Alternate I (NOV 2016) of 52.219-9. [] (iii) Alternate II (NOV 2016) of 52.219-9. [] (iv) Alternate III (JUN 2020) of 52.219 9. [] (v) Alternate IV (JUN 2020) of 52.219 9. [] (18) 52.219-13, Notice of Set-Aside of Orders (MAR 2020) (15 U.S.C. 644(r)). [] (19) 52.219-14, Limitations on Subcontracting (MAR 2020) (15 U.S.C. 637(a)(14)). [] (20) 52.219-16, Liquidated Damages Subcontracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)). [] (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (MAR 2020) (15 U.S.C. 657f). [] (22)(i) 52.219-28, Post Award Small Business Program Rerepresentation (MAR 2020) (15 U.S.C 632(a)(2)). [] (ii) Alternate I (MAR 2020) of 52.219-28. [] (23) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically Disadvantaged Women-Owned Small Business (EDWOSB) Concerns (MAR 2020) (15 U.S.C. 637(m)). [] (24) 52.219-30, Notice of Set-Aside for, or Sole Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (MAR 2020) (15 U.S.C. 637(m)). [] (25) 52.219-32, Orders Issued Directly Under Small Business Reserves (MAR 2020) (15 U.S.C. 644(r)). [] (26) 52.219-33, Nonmanufacturer Rule (MAR 2020) (15 U.S.C. 637(a)(17)) [] (27) 52.222-3, Convict Labor (June 2003) (E.O. 11755). [] (28) 52.222 19, Child Labo...