Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

80 Mesh Garnet Abrasive Blast grit

Awarded

SPMYM326P5067Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This award notice, identified by solicitation number SPMYM326P5067, is for the procurement of 80 Mesh Garnet Abrasive Blast grit. The contract is issued by the Department of Defense through DLA Maritime - Portsmouth and is designated as a Total Small Business Set Aside under NAICS code 327910. The place of performance for this contract is located in Kittery, Maine. Primary administrative contact is Robert Dowdle, with additional support provided by the DLA-KME PNSY email box.

General Info

DoD contract SPMYM326P5067 for 80 Mesh Garnet Abrasive Blast grit in Kittery, Maine.

Agency

Department Of Defense → DLA Maritime - Portsmouth

Contract Value

$78,199.81

NAICS

327910 - Abrasive Product Manufacturing

Place of Performance

Kittery, ME, 03904, USA

Set-Aside

SBA

Awardee

BARTON MINES COMPANY, L.L.C.

Award Issued Date

08/12/2026, 12:00:00 AM UTC

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded

PostedAug 14

Award Notice

AwardedAug 12

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Maritime - Portsmouth

Contacts2 people available

OfficePORTSMOUTH, NH, 03801-5000, USA

Organization / AgencyDepartment Of Defense → DLA Maritime - Portsmouth

Office AddressPORTSMOUTH, NH, 03801-5000, USA

Contacts

Robert Dowdle

contact@example.gov

DLA-KME PNSY BOX

contact@example.gov

Full Description

Show more

https://api.sam.gov/prod/opportunities/v1/noticedesc?noticeid=9a4b4ff0b4304b91b7f21952c90fc5a6

Similar Contracts

Same NAICS industry code

Windows & Exterior Doors SupplierThis subcontract opportunity with the City of Duluth in Minnesota involves the procurement and delivery of windows and exterior doors for prime contractors working on city duplex construction projects. The selected supplier will be responsible for the entire logistics chain, including the sourcing of materials and the final delivery of all window and door units directly to the designated job sites. The solicitation was posted on October 16, 2026, and requires responses to be submitted by November 18, 2026. This project falls under NAICS code 327910 and is managed through the Bid Express platform.

POSTED

DEADLINE

Bulkhead Abrasive Blasting and Industrial Coating ApplicationThis small business set-aside subcontract involves the removal of existing coatings and the application of new industrial coating systems for twelve bulkheads on US Army Engineer District Walla Walla projects. The scope of work requires dry-blast cleaning surfaces to white metal according to SSPC SP 5 / NACE No. 1 standards and performing sweep blasting per SSPC SP7. All spray coatings must adhere to SAE AMS-STD-595A specifications. To qualify, the contractor must hold SSPC QP 3 or AISC Complex Coatings certification and provide an SSPC-PCI or NACE CIP Level 2 inspector. This project falls under NAICS code 327910 and is managed through the Department of Defense.

US Army Engineer District Walla Wal

POSTED

DEADLINE

Specialty SuppliesThis subcontract for Specialty Supplies involves the provision of specific interior components for building construction projects located in Buffalo, New York. The scope of work requires the supplier to provide and deliver roller window shades and countertops, along with other necessary materials and fixtures, directly to the project site to support prime contractors. The opportunity was posted on October 15, 2026, with a response deadline of October 29, 2026. Classified under NAICS code 327910, the contract is managed through the state of New York.

POSTED

DEADLINE

Solicitation # N0010426QBB38

Solicitation N00104-26-Q-BB38 is a fixed-price request for quotations issued by the NAVSUP Weapon Systems Support Mech for the manufacture and design of polishing film. The required item is specifically identified as part number 0700-2720 from manufacturer Kitco Fiber Optics Inc., with a unit of measure of 10 sheets per package and NSN 1HM 5350-01-545-0206. The procurement is governed by the Lowest Priced Technically Acceptable (LPTA) award method, where the contract will be granted to the responsible offeror providing the lowest price for a technically conforming offer. The delivery period is set at 120 days with FOB Destination terms, and the solicitation closing date was amended to November 6, 2026. Technical requirements include a strict prohibition on the intentional addition of mercury and compliance with MIL-STD-2073 for packaging, with specific marking requirements per MIL-STD-129. Inspection and acceptance are to occur at the contractor's or subcontractor's plant. Contractors must utilize the Wide Area Workflow (WAWF) system for electronic invoicing and receiving reports. Offerors are required to be registered in the System for Award Management (SAM) and must submit a completed Standard Form 33, the Schedule of Supplies, and the necessary representations and certifications in Section K to be considered for award.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Garnet Abrasive Supply – Bulk Industrial Grade

DLA Maritime - Puget Sound

POSTED

DEADLINE

Vehicle Recompete: Idc 70Z03822DK0000001This Indefinite Delivery Contract, managed by the Aviation Logistics Center under the Department of Homeland Security, focuses on the maintenance and repair of blast facilities and blast cabinets. The vehicle has a total ceiling of 194,232 dollars and is scheduled to remain active through April 24, 2027. There is currently no set-aside designation associated with this contract, and it is classified as likely to be competed again in the future. Aerospace Facilities Group, Inc. has been the primary provider for various task orders, including quarterly maintenance visits and specific repairs to the USCG blast system. Key activities have involved inspection and troubleshooting of blast systems to support aircraft depot maintenance. While there are currently no active task orders listed, previous expenditures have covered routine quarterly visits and specialized system repairs.

Aviation Logistics Center (ALC)(00038)

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA Maritime - Portsmouth

Same awarding agency

Specialized Freight ShippingThis subcontract for Specialized Freight Shipping involves the transportation and delivery of 338 manufactured rack curtains for prime contractors supporting US Navy supply contracts. Managed by DLA Maritime Portsmouth under the Department of Defense, the project requires the contractor to package and haul the materials to a specified government destination in Kittery, Maine, with a final delivery deadline of November 30, 2026. The opportunity is designated as a total Small Business Set Aside under NAICS code 484121. Qualified bidders must possess standard commercial carrier licenses to perform the delivery services. The solicitation was posted on October 19, 2026, with a response deadline of October 26, 2026.

General Freight Trucking, Long-Distance, Truckload

POSTED

DEADLINE

Navy Shipboard Rack Curtain ManufacturingThis subcontract, managed by DLA Maritime - Portsmouth for the Department of Defense, requires the manufacture and supply of 338 black single-panel rack curtains, identified as Product Number RC-SPECIAL 1. These curtains are intended for prime contractors working on US Navy shipboard projects and must be fabricated from darkening double-layer Nomex material. Specific design requirements include the exclusion of sliders at the top and the inclusion of inside bottom pockets for any units with a height of 18 inches or greater. To ensure operational safety and quality, all deliverables must be Navy shipboard approved and strictly comply with MIL-C-24500 and MIL-STD-1623 standards. This opportunity is designated as a Total Small Business Set Aside under NAICS code 336612, with the place of performance located in Kittery, Maine.

POSTED

DEADLINE

RACK CURTAINS, BLACK SINGLE PANELS, VARIOUS SIZES DARKENING DOUBLE LAYER NOMEX, NAVY SHIPBOARD APPROVED IAW MIL-C-24500 PER MIL-STD-1623

Solicitation # SPMYM327Q6001

DLA Maritime Portsmouth is soliciting quotes for the procurement of 338 black single panel rack curtains, identified as product number RC-SPECIAL 1. These curtains must be constructed from darkening double-layer Nomex and be Navy shipboard approved in accordance with MIL-C-24500 and MIL-STD-1623. Technical specifications require inside bottom pockets for curtains 18 inches or higher and the absence of sliders at the top for mounting. The requirement is a 100 percent small business set-aside under NAICS code 314120, with a size standard of 750 employees. The contract will be awarded based on the Lowest Price Technically Acceptable (LPTA) criteria, with the Government Required Delivery Date set for November 30, 2026. Offerors must be active in the System for Award Management (SAM) and provide descriptive literature to demonstrate technical compliance. If the offeror is not the manufacturer, proof of traceability is required. Quotes must be submitted via email to the designated point of contact by October 26, 2026, at 1:00 PM EST. Payment will be processed on Net 30 terms via the Wide Area Workflow (WAWF) or Government Commercial Purchase Card.

Curtain and Linen Mills

POSTED

DEADLINE

Certified Bar Stock SupplyThis subcontract involves the supply of certified raw material bar stock for prime contractors supporting DLA Maritime projects under the Department of Defense. The required high-grade alloy bar stock must strictly adhere to the metallurgical properties specified in Drawing 6509E59/G and MIL-DTL-1222J. To ensure quality and compliance, the provider must deliver Material Test Reports and maintain full material traceability, including heat and lot numbers, to facilitate any necessary alternate mechanical testing. The project is associated with NAICS code 334418 and will be performed in Kittery, Maine. Interested parties should note that the response deadline for this opportunity is December 20, 2026.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Valve Stem Fastener FabricationThis subcontract involves the fabrication of four high-precision valve stem fasteners, part number 6D60814-001, for prime contractors supporting DLA Maritime projects in Kittery. The work requires strict adherence to Northrop Grumman Drawing 6509E59/G, with thread rolling performed according to MIL-DTL-1222J and Type A marking applied per MIL-STD-792. The selected provider must possess precision CNC machining and thread rolling equipment and maintain CMMC Level 2 certification. Final deliverables must include the completed fasteners along with all necessary material certificates. The response deadline for this opportunity is December 20, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Northrop Grumman Valve Stem Fasteners

Solicitation # SPMYM327Q2001

The Portsmouth Naval Shipyard, through DLA Maritime, is seeking the procurement of four valve stem fasteners (part number 6D60814-001) produced according to Northrop Grumman Drawing 6509E59/G. This is a sole-source requirement for Northrop Grumman because the parts and drawings are proprietary and serve as direct replacements for existing equipment. The solicitation, numbered SPMYM327Q2001, is for commercial items under FAR Part 12, with a response deadline of December 20, 2026. The government requires a delivery date of November 18, 2026, and the award will be based on the Lowest Price Technically Acceptable (LPTA) criteria. Technical requirements include CMMC Level 2 certification and adherence to MIL-DTL-1222J for thread rolling and MIL-STD-129 or ASTM D-3951 for packaging and marking. Inspection and acceptance are generally performed at the destination, though origin inspection is permitted subject to a $2,500 evaluation fee. Payment terms are Net 30 days after acceptance, with invoicing processed through the Wide Area Workflow (WAWF) system. Offerors must be active in the System for Award Management (SAM) and provide specific identifiers, including CAGE codes and CMMC unique identifiers, to be considered responsive.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

DEADLINE

Secure Packaging, Labeling, and ShippingThe contract involves providing secure, military-standard packaging and labeling services in strict accordance with specified DATA ITEM NO. requirements. The scope includes preparing shipments to meet all necessary military specifications and ensuring delivery to the designated destination, FOB Destination, in Kittery, Maine. This subcontract is set aside entirely for small businesses, following the SBA Total Small Business Set-Aside guidelines under FAR 19.5, with the NAICS code 561910, which pertains to packaging and labeling services. The contracting agency responsible for this procurement is the Department of Defense, specifically DLA Maritime - Portsmouth. The contract is structured to ensure compliance with all specified packaging, labeling, and shipping mandates to support military logistics. The place of performance is Kittery, Maine, with the focus on meeting precise shipment requirements to facilitate secure and timely delivery as stipulated in the contract terms.

Packaging and Labeling Services

POSTED

DEADLINE

Compliance Documentation & Certification ServicesThe contract focuses on the preparation and validation of military compliance documentation, including Certificates of Compliance and Contract Data Requirements List (CDRL) data packages. It is a subcontract opportunity designated as a Total Small Business Set-Aside under FAR 19.5, aimed at businesses classified under the NAICS code 541690. The contracting agency is the Defense Logistics Agency (DLA) Maritime located in Portsmouth, under the Department of Defense. The work is to be performed in Kittery, with the ZIP code 03904. This subcontract involves ensuring that all compliance documentation meets military standards and regulatory requirements, which is critical for maintaining certification and operational readiness. The solicitation was posted on April 16, 2026, and it offers small businesses an opportunity to contribute to defense logistics by providing specialized compliance and certification services.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Material Testing and Certification ServicesThe contract involves third-party chemical and mechanical testing of fastener materials, ensuring that the materials meet specific military standards. These tests will be accompanied by certified reports verifying compliance, which is critical for maintaining the integrity and reliability of fasteners used in defense applications. The scope includes both chemical composition analysis and mechanical performance evaluations, reflecting stringent quality control measures required by the Department of Defense. This subcontract is a total small business set-aside under the SBA guidelines, designated under NAICS code 541380, which covers testing laboratories. The contract is issued by DLA Maritime - Portsmouth and the work will be performed in Kittery, ZIP code 03904. The arrangement supports the Department of Defense's commitment to sourcing reliable, small business partners for specialized technical services that ensure material certification aligns with military specifications.

Testing Laboratories and Services

POSTED

DEADLINE

Precision Fastener Manufacturing – Hex Head Cap ScrewsThe contract calls for the manufacturing of hex head cap screws in accordance with the specifications QQ-N-2810 Amend 2 and QQ-N-286G. The scope includes complete material verification, precise machining, and finishing processes to ensure the fasteners meet rigorous quality and performance standards. This subcontract is designated as a total small business set-aside under the SBA guidelines, indicating that only small businesses are eligible to participate. Managed by the Defense Logistics Agency Maritime at Portsmouth on behalf of the Department of Defense, the work will be performed in Kittery, zip code 03904. The contract falls under the NAICS code 332722, which pertains to precision turned product manufacturing. The procurement emphasizes compliance with federal acquisition regulations and strict adherence to specified material and manufacturing standards to support defense-related fastener requirements.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Precision Fastener Manufacturing – Socket Head Cap ScrewsThis contract involves the manufacturing of precision socket head cap screws compliant with ASTM F468-23 standards and applicable military specifications. The scope includes the full production process such as machining, heat treatment, and comprehensive quality control to ensure the fasteners meet strict performance and durability requirements. The contract is structured as a subcontract and is designated as a Total Small Business Set-Aside under FAR 19.5, aiming to support eligible small business participation. The contracting agency is the Defense Logistics Agency (DLA) Maritime based in Portsmouth, operating under the Department of Defense. The place of performance is identified as Kittery with the postal code 03904. The relevant North American Industry Classification System (NAICS) code for this contract is 332722, which corresponds to the manufacture of precision turned products. The contract was posted on April 16, 2026, and no solicitation number or specific point of contact details are provided.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Technical Data and Engineering Support

Engineering Services

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS