80 -- SEALING COMPOUND

I HAVE 2 CURRENT ORDERS FOR THIS NSN 8030-01-301-5247 FOR A TOTAL OF 118 KITS.PLEASE BID ORIGIN FOR THIS MATERIAL. I WOULD LIKE TO ISSUE A STANDING PRICE QUOTE FOR THIS NATIONAL STOCK NUMBER FOR 12 MONTHS.MATERIAL MUST BE Rhodia Inc., Silicone product VI-SIL V-622, part number 60009.NO SUBSTITUTIONS ACCEPTED. 8030-01-301-5247 UI: KT SEALING COMPOUND: DESCRIPTION A two-component, black, silicone rubber compound for use as an abradable sealant on Pratt & Whitney jet engine compressor blades. Size: 1 gallon kit quantities consisting of silicone rubber base resin and curing agent packaged separate containers. Shelf life code: 2 (6 months) Maximum age on delivery: 1 month Rhodia Inc., Silicone product VI-SIL V-622, part number 60009. ITEM MARKING Each item shall be marked with the following: (1) lot or batch number (2) shelf life monitoring data including starting dates of manufacture or shipment, as appropriate, and stop/check dates of reinspection or expiration (3) instructions foruse, thinning, mixing, shaking, etc. (4) instructions for storage, i.e. do not freeze, requires refrigeration, etc. (5) each kit component shall be marked with the kit name and component part. (6) manufacturer's name and part number (7) if applicable, the maximum volatile organic compound content (VOC), less water and exempt solvents, in lbs/gl or grams/liter. (8) if the VOC of the item exceeds the legal limits for sale in California according to the South Coast Air Quality Management District limits in effect, then the product shall be marked on each unit and shipping container, "Not for sale or use in South Coast Air Quality Management District." PACKAGING KIT PACKAGING: The product shall be furnished in the specified kit size quantities packaged in the manufacturer's original, separate containers and in accordance with normal commercial practice. There shall be no interaction chemically or physically with the contents so as to damage the containers or alter the strength, quality, or purity of the contents. Such packaged ingredients shall be further packaged or assembled together as a complete unit in kit form. The filled containers and kit assembly shall be closed in a manner that will insure the contents will not spill or leak from the containers and that separation of the components will be prevented during shipment, handling, storage, and redistribution. PACKING PACKING: Material packaged as specified above shall be packed in a close-fitting, corrugated, fiberboard box conforming to Section 6(a), Rule 41 of the Uniform Freight Classification and Item 222 of the National Motor Freight Classification (200 minimumburst). Closure of the boxes shall be in accordance with Section 7 of Rule 41 of the Uniform Freight Classification. Gross weight of the box and contents shall not exceed 65 pounds. MARKING All unit, intermediate, transport packages and unit loads shall be marked for delivery to military activities in accordance with MIL-STD-129P, Change 2, dated 10 February 2004. South Coast Air Quality Management Statement: If the VOC of the item exceeds the legal limits for the intended use in the South Coast Air Quality Management jurisdiction, then the product shall be prominently marked in contrasting and highly visible lettering on the outside of the shipping container "NOT FOR SALE OR USE IN SOUTH COAST AIR QUALITY MANAGEMENT DISTRICT" PALLETIZATION Pallet Configuration: The pallets shall be 48-inch length x 40-inch width, general purpose, four-way entry, flush stringer, double-face non-reversible pallets. Pallet lumber used shall be bark free. Pallet Load Size: The load plus the pallet shall have a maximum height of 53 inches and shall not exceed 2500 pounds in weight for shipments to Eastern Distribution Center (Burlington). The palletized load shall not exceed 2000 pounds in weightfor shipments to the Western Distribution Center (Sharpe). Pallet Load Configuration: The containers or items shall be placed in a suitable pattern to form a stable and balanced load. Palletized loads shall be secured to the pallet to insure that theload arrives intact. Stacking Strength: The pallet plus the load shall be capable of supporting three additional like loads without any product damage and without the load or the pallet collapsing. Vertical, horizontal, or filler reinforcement may be added as necessary to provide strength. Partial Palletized Loads: Less than one-half pallet loads shall not be used for stacking, unless load is balanced on pallet. The partial palletized load shall be used for top loading only. NOTICE OF REQUIREMENTS FOR SHIPMENT TO EUROPEAN UNION COUNTRIES: Per Clause D-FSS-468, non-manufactured wood pallets and other non-manufactured wood package material used in shipments destined for ultimate delivery to or through a European Union (EU) country shall comply with the Emergency Measures (2001/219/EC) adopted by the Commission of the European Communities (CEC). Additionally, shipments delivered to DoD distribution facilities or freight consolidation points for eventual delivery to or through EU countries shall comply with DLA PROCLTR 01-15. PLEASE E-MAIL ME AT contact@example.gov FOR QUESTIONS.