Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

81--SHIPPING AND STORAG

Active
SPRPA126RVC35Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the acquisition of four units of NSN 6K-8145-015223940-DQ, with delivery terms set at FOB origin, meaning the buyer assumes all transportation costs and risks once the item leaves the supplier’s location. Engineering source approval is mandatory, as the part relies on proprietary design capability, specialized manufacturing or repair knowledge, and unique technical data held exclusively by approved sources, none of which are economically accessible to the Government. Any alternate supplier must undergo formal qualification through procedures established and approved by the cognizant Government engineering activity to ensure the part maintains its required quality standards. The acquisition is subject to a Total Small Business Set-Aside under FAR 19.5, restricting eligibility to small businesses, and is being managed by the Department of Defense through the Defense Logistics Agency Aviation office in Philadelphia. The presolicitation was posted on July 23, 2026, with responses due by September 8, 2026, and primary point of contact is Makayla Hauser of the APAC.41 team.

General Info

Four NSN 6K-8145-015223940-DQ units, FOB origin, small business set-aside, engineering approval required.

Agency

Department Of Defense → Pa DLA Aviation At PhiladelphiaView Agency

NAICS

488991 - Packing and CratingView NAICS

Place of Performance

PA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhasePresolicitation
Posted

Presolicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Pa DLA Aviation At Philadelphia
Contacts1 person available
OfficePHILADELPHIA, PA, 19111-5098, USA
Organization / Agency
Department Of Defense → Pa DLA Aviation At Philadelphia
View Agency Profile
Office AddressPHILADELPHIA, PA, 19111-5098, USA

Full Description

Show more
NSN 6K-8145-015223940-DQ, TDP VER 015, REF NR 706E001, QTY 4 EA, DELIVERY FOB ORIGIN. This part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing/repair knowledge by the qualified source(s) require acquisition/repair of the part from the approved source(s). The approved source(s) retain data rights,manufacturing/repair knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application.

Similar Contracts

Same NAICS industry code

NAICS: 488991
New
Federal
EUR/Athens - Move services for the U.S. Embassy Athens, GreeceThe United States Embassy in Athens, Greece is seeking a qualified contractor to provide comprehensive packing and moving services for its transition from the Politia Business Center at 109-111 Messoghion Avenue to the new Chancery Building at 91 Vasileos Sofias Avenue. The contract, identified by solicitation number 19GR1026Q0029, is classified under NAICS code 488991 for packing and crating and will be awarded as a firm fixed price contract. The awardee must be an established business with a permanent physical address in Greece and hold all necessary licenses and permits to legally operate within the country. All offerors are required to be registered in the System for Award Management (SAM) database prior to submitting a response, a mandate that applies to quotations exceeding $40,000 in value, as stipulated by FAR provision 52.204-7. The performance location is clearly defined as the new embassy chancery in Athens, Attikí, and the work involves the secure transportation, packing, and crating of embassy property during the relocation. Submissions must be delivered electronically via email, with attachments limited to .zip and .pdf formats and individual files not exceeding 25 MB in size; external cloud storage links are prohibited due to security restrictions. If a proposal exceeds the file size limit, it must be split into multiple emails each under 25 MB. The solicitation is currently in a pre-solicitation phase, meaning official response deadlines, evaluation criteria, and detailed performance specifications have not yet been published but will be made available when the formal request for quotation is released on SAM.gov.
American Embassy Athens

POSTED

about 20 hours ago

DEADLINE

in 25 days
View Details
NAICS: 488991
New
DIBBS
RETAINER, PACKINGThis contract, identified by solicitation number SPE7M2-26-Q-0652, is for the procurement of 19 units of NSN 0001S00000053 under a restricted source arrangement requiring government engineering source approval. Deliverables are scheduled for completion 771 days after award, with performance tied to San Diego, California, and inspection and acceptance occurring at the contractor’s origin site. Contractual obligations include strict adherence to DLA Packaging Requirements for Procurement (RP001), MIL-STD-129 for marking and bar-coding, and comprehensive documentation requirements including Certificate of Quality Compliance, First Article Testing Report, and Production Test and Inspection Report. The contract explicitly prohibits the use of ozone-depleting chemicals and mandates that mercury or mercury-containing compounds not be intentionally introduced into supplied hardware, except for specific functional exceptions governed by NAVSEA 5100-003D, which further requires shock-proof containment with a secondary boundary for portable items containing mercury. All items must comply with NAVAIR aircraft launch and recovery equipment traceability standards and be marked with the contract number, NAWC CAGE code, and part number per technical drawings, with drawing requirements overriding general contract specifications in case of conflict. The contract incorporates multiple FAR and DFARS clauses relating to changes, subcontracting, first article approval, cost control, disputes, termination, and cybersecurity, including mandatory compliance with safeguarding covered defense information and cyber incident reporting under DFARS 252.204-7012. Technical data is subject to export controls under ITAR or EAR, limiting access to contractors with approved JCP certification, completed DLA export control training, and formal authorization. Compliance with the Buy American statute and sustainable product requirements is enforced, and electronic invoicing must be submitted through WAWF. The contract value is unspecified as pricing fields remain blank, and no offeror representations, certifications, or socioeconomic status disclosures have been provided. The procurement is evaluated based on technical acceptability, including potential cost adjustments for government first article testing and evaluation of alternate product submissions, though the basis of award—whether LPTA or trade-off—is not delineated.
NUCLEAR REACTOR PROGRAM

POSTED

4 days ago

DEADLINE

in 6 days
View Details
NAICS: 488991
New
Federal
81--SHIPPING AND STORAGThe contract involves the procurement of 30 units of NSN 6K-8145-012622982-YX, with delivery terms specified as FOB origin, meaning the buyer assumes responsibility for the item once it leaves the supplier’s location. Engineering source approval is mandatory to ensure part quality, as only qualified sources possess the unique design capabilities, specialized engineering skills, and proprietary manufacturing or repair knowledge essential to maintaining performance standards. These approved sources hold exclusive data rights and technical information that are not economically accessible to the Government, making source restriction necessary. Any alternative supplier must undergo formal qualification through procedures approved by the cognizant Government engineering activity responsible for the part’s intended application, ensuring compliance with designated quality and technical requirements. This is a presolicitation notice issued under solicitation number SPRPA126RVC31, with a response deadline of September 2, 2026, and is designated as a Total Small Business Set-Aside under FAR 19.5, limiting eligibility to small businesses. The requirement is managed by the Department of Defense through the DLA Aviation office in Philadelphia, Pennsylvania, with the primary point of contact being Makayla Hauser of APAC.41. The part’s technical specifications and sourcing restrictions indicate a reliance on niche suppliers with established expertise, and the Government retains strict oversight over qualification processes to safeguard mission-critical performance and supply chain integrity.
Pa DLA Aviation At Philadelphia

POSTED

7 days ago

DEADLINE

in about 1 month
View Details
NAICS: 488991
Federal
FY26 Household Goods Packing DPMThe contract titled FY26 Household Goods Packing DPM, with solicitation number FA568226Q0012, is aimed at securing a contractor to provide comprehensive Packing, Containerization, and Local Drayage services for military members and civilian employees under the Department of Defense’s Direct Procurement Method for personal property shipments. The contractor will be responsible for supplying all necessary personnel, equipment, facilities, supplies, services, and materials required to prepare household goods and unaccompanied baggage for inbound, outbound, and local moves, with the exception of government-furnished items. Services include the full lifecycle of handling personal property from preparation through transportation and related logistics, ensuring compliance with DoD standards for the movement and storage of personal effects. This solicitation was posted on July 17, 2026, with a response deadline of August 21, 2026, at 2:00 PM EDT. The contract falls under NAICS code 488991 for other support activities for air transportation and is managed by the Department of Defense through the office located in APO, AE, 09604-6102, with performance occurring across Armed Forces - Europe. The primary point of contact is Elysia King, reachable at 314-632-2727 or elysia.king@us.af.mil, with Gualtiero Casadio noted as secondary contact. An amendment published on the same day as the solicitation adds clarifying guidance on how questions regarding the solicitation must be submitted, ensuring all potential offerors have consistent and accurate procedures for seeking information before submitting proposals.
FA5682 31 Cons (unit 6102)

POSTED

8 days ago

DEADLINE

in 27 days
View Details
NAICS: 488991
Federal
EUR/Athens - Shipping door-to-door services for the U.S. Embassy Athens, GreeceThe U.S. Department of State, through the American Embassy in Athens, is seeking a contractor to provide door-to-door shipping services for the relocation of heritage art pieces from the U.S. Mission to the United Nations in New York City to the U.S. Embassy Athens Chancery located at 91 Vas. Sophias Avenue in Athens, Greece. The awardee must be an established business operating within Greece and must be registered in the System for Award Management (SAM) database prior to submitting an offer, as required by FAR provision 52.204-7. The contract will be awarded on a firm fixed price basis with the government retaining the right to make an award based solely on the initial offer without negotiation. The NAICS code associated with this procurement is 488991, with additional relevance to 561720 for packing and crating services, reflecting the specialized handling required for cultural artifacts. The place of performance is clearly defined as Athens, Greece, and the procurement is classified under transportation and relocation services with a focus on secure, high-value art transport. All proposals must be submitted electronically via email and adhere to strict file format requirements: only .zip and .pdf files are permitted, and individual email attachments must not exceed 25 MB in size. If the total submission exceeds this limit, it must be split into multiple emails, each under 25 MB, and external cloud storage links such as Dropbox or Google Drive are not acceptable due to potential server blocking. The solicitation number is 19GR1026Q0038, posted on July 10, 2026, as a pre-solicitation notice indicating the procurement is not yet ready for formal solicitation, and key details such as the period of performance, delivery schedule, specific inspection criteria, packaging requirements, and total estimated value have not yet been defined. Primary and secondary points of contact for inquiries are Dresden A. Kalin and Alexandra Kouyentaki, both reachable through AthProcurement@state.gov. No set-aside provisions apply, and there is no indication of evaluation factors, weighting, or pass/fail criteria at this stage, as the full solicitation document has not yet been issued.
American Embassy Athens

POSTED

15 days ago

DEADLINE

N/A
View Details
NAICS: 488991
SLED
Laboratory Relocation ServicesThe Missouri Department of Natural Resources, Missouri State Highway Patrol, and Missouri Department of Agriculture are seeking proposals for Laboratory Relocation Services through Solicitation STATE 0000000487SL, issued on July 10, 2026, with responses due by August 11, 2026. The contract will cover the comprehensive planning, packaging, transportation, and reinstallation of laboratory equipment and materials across state facilities within Missouri, ensuring compliance with safety, environmental, and scientific integrity standards throughout the move. All work must be performed within the state, and vendors are expected to demonstrate proven experience in handling sensitive laboratory environments, including hazardous materials and precision instruments. Proposals must be submitted to the Procurement Division of the Missouri State Government, with Nicolle Backes serving as the designated buyer and primary point of contact via nicolle.backes@oa.mo.gov. The solicitation does not specify a set-aside classification or NAICS code and is open to qualified contractors capable of executing complex, mission-critical relocations under strict timelines and regulatory guidelines. Bidders are directed to the online procurement portal for full solicitation details and to submit responses electronically before the deadline. Failure to meet all technical, logistical, or compliance requirements may result in disqualification.
PROC OA DIVISION OF PURCHASING PROCUREMENTS

POSTED

15 days ago

DEADLINE

in 17 days
View Details
NAICS: 488991
Federal
WORLDWIDE WAREHOUSE REDISTRIBUTION SERVICES (WWRS) IN-TRANSIT INSPECTION POINT (IIP) SERVICESThis solicitation, FA8630-26-R-B009, seeks In-Transit Inspection Point (IIP) services to support the Worldwide Warehouse Redistribution Services (WWRS) program, a fee-for-service international redistribution initiative that handles excess serviceable equipment and spare parts from Foreign Military Sales (FMS) countries and international organizations to meet U.S. Government requirements. The award will be made using the Lowest Price Technically Acceptable (LPTA) process under Subpart FAR 12.6 as a commercial item acquisition, with a 100% small business set-aside under NAICS code 488991 and a $30 million size standard. The contract has a five-year potential duration, starting January 1, 2027, through December 31, 2031, with a base period and four sequential one-year option periods, all structured as Firm Fixed Price (FFP) with CLINs covering IIP liaison support, inspection services, material disposal, and freight and insurance. Offerors must maintain a secure, dry facility within 25 miles of the Air Force Security Assistance Center at Wright-Patterson AFB, Ohio, and must receive shipments on the first day of performance, ensuring 90% of shipments are turned around within two business days and 99% are correctly routed per the MAPAD. Proposal submissions must be made via email by 2:00 p.m. Eastern Time on August 10, 2026, to designated contracting personnel, with a required subject line and only .pdf, .doc, or .xls attachments permitted. Technical proposals are capped at 15 single-sided pages and cost/price proposals at five pages, both adhering to strict formatting rules including 12-point font, one-inch margins, and sequential page numbering; foldouts count as two pages. Offerors must address nine critical technical subfactors—including facility operations, inspection procedures, packaging and marking, life-limited item management, shipment routing, material tracking, certification acquisition, system interfacing with AOL and WWRS Logistics System, and IIP liaison competency in MILSTRIP—all rated as either Acceptable or Unacceptable. A proposal must meet Acceptable ratings across all technical subfactors and include valid certifications by contract award to be deemed technically acceptable. Cost proposals must use the WWRS Pricing Matrix (Attachment 9) and be evaluated based on Total Evaluated Price (TEP),
FA8630 Aflcmc Wfk Afsac

POSTED

17 days ago

DEADLINE

in 16 days
View Details
NAICS: 488991
Federal
Accessibility Modifications for Medical Transport VanThe contract entails the installation of accessibility modifications on medical transport vans to ensure full compliance with the Americans with Disabilities Act for veteran transportation services. This includes the procurement and installation of wheelchair lifts, ADA-compliant ramps, securement systems to safely stabilize mobility devices during transit, and interior configurations that accommodate users with physical disabilities, such as widened doorways, grab bars, non-slip flooring, and adequate clearances. All work must adhere to federal accessibility standards and be performed on vehicles designated for veteran medical transport, ensuring safe, dignified, and reliable access to healthcare services. The contract is classified as a subcontract under NAICS code 488991 for other support activities for road transportation, issued by the Department of Veterans Affairs through the 250-NETWORK Contract Office 10. Although no specific solicitation number or set-aside designation is provided, the posting date of May 14, 2026, indicates the anticipated timeline for contract award and execution. Performance is expected to occur across multiple locations where the transport vans are operated, with no specific city or state outlined. The work supports the VA’s mission to provide equitable healthcare access to veterans with mobility challenges through properly equipped and compliant transportation assets.
250-NETWORK Contract Office 10 (36C250)

POSTED

2 months ago

DEADLINE

N/A
View Details
NAICS: 488991
Federal
19NL80-26-R-0001 Packing and Crating Services The HagueThe U.S. Embassy in The Hague, Netherlands, plans to issue a solicitation (number 19NL80-26-R-0001) for Packing and Crating Services, classified under NAICS code 488991. This procurement is currently at the pre-solicitation stage, with the full solicitation to be posted on SAM.gov when ready. The contract envisions a base one-year performance period with four additional one-year option periods, all under a firm fixed-price contract type. Services will be performed at the U.S. Embassy located at John Adams Park 1, 2244 BZ Wassenaar, The Netherlands, focusing on packing, crating, and preparing government property for shipment. The Government may award the contract based on initial quotes without conducting discussions, emphasizing price as a primary factor. A pre-quotation conference is planned to aid prospective offerors, with electronic submissions accepted by email, limited to 30 MB per message. Key terms include the application of FAR clause 52.229-12 regarding tax on certain foreign procurements, reflecting the international nature of this contract. There is no set-aside for small or disadvantaged businesses. Although specific packaging, marking, and inspection criteria are not detailed in this presolicitation notice, inspection and acceptance are expected at the contract’s place of performance, with the Government retaining acceptance authority. The solicitation does not provide detailed evaluation factors or pricing details at this stage, nor does it specify security clearance or organizational conflict of interest requirements. Primary points of contact are the Contracting Officer, Jonathan P. Wedd, and the Procurement Supervisor, Geoffrey Osei-Bonsu, reachable via the Embassy’s official contract email. The solicitation archive date is set for September 30, 2026. Vendors interested in participating must monitor SAM.gov for solicitation release and submission deadlines.
US Embassy The Hague

POSTED

5 months ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → Pa DLA Aviation At Philadelphia

Same awarding agency

NAICS: 332439
New
Federal
81--SHIPPING AND STORAGThis contract, solicitation SPRPA126RVC05, issued by the Department of Defense through DLA Aviation at Philadelphia, pertains to the supply of shipping and storage containers governed by Drawing 838E001, Revision Latest, and referenced specifications including MIL-I-45208. The containers must be manufactured using rotational molding with polyethylene shell material and meet stringent quality and compliance requirements, including adherence to AWS welding standards for steel, aluminum, and stainless steel, and use of electrodeposited alkaline Zinc-Nickel Alloy finishes in place of cadmium plating. Each container must be affixed with a Unique Identification (UID) marking in data matrix format per MIL-STD-130, and a serial number formatted as “contract#_no_dashes-000X.” A First Article Test (FAT) is mandatory unless waived for previously approved suppliers who can demonstrate identical prior production within three years at the same facility using identical processes and without waivers or rejections. The contractor must submit one unit for FAT within 120 calendar days of contract award, and the government will conduct rigorous testing including dimensional inspection, initial and final leak tests at 0.25±0.05 PSIG, an 18-inch free-fall drop test, and form-and-fit verification using government-provided items. The cost of FAT testing, estimated at $12,000, is borne by the contractor, and any failure to comply may result in contract default. All testing components, including shipping and disposal, are the contractor’s responsibility, and rejected units must be corrected and resubmitted at the contractor’s expense. The contract imposes strict controls on materials and manufacturing processes: welding must follow specific filler alloys for aluminum (4043 or 5356/5556), and work stations must maintain clean, controlled environments to prevent contamination. Contaminants such as oils and waxes must be removed through approved cleaning methods, and chemical deoxidizing must occur no more than 10 days prior to welding (reduced to 3 days outdoors), followed immediately by mechanical cleaning using approved stainless steel tools to prevent galvanic corrosion. Desiccant in accordance with MIL-D-3464 must be included at one-third unit per cubic foot of interior volume, and packaging must comply with MIL-STD-2073. The contract mandates use of the Workflow Pro Mod Assist Module, requires adherence to Buy American provisions
Other Metal Container Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 19 days
View Details
NAICS: 332439
New
Federal
81--SHIPPING AND STORAGThis contract encompasses the procurement of specialized shipping and storage containers under solicitation SPRPA126RVB95, issued by the Defense Logistics Agency Aviation at Philadelphia, with a closing date extended to August 27, 2026. The containers must be manufactured to exacting specifications outlined in Container Research Corporation drawing number 05259, revision latest, with aluminum shell material and strict adherence to AWS welding standards for aluminum, steel, and stainless steel. Critical requirements include compliance with MIL-STD-130 for Unique Identification (UID) marking in data matrix format, with each unit assigned a serial number following the format “contract#_no_dashes-000X”. Welding processes must be controlled, documented, and inspected with visual and potential non-destructive testing, while sealing crevices and applying electrodeposited zinc-nickel alloy finishes are mandatory. Materials and processes are tightly regulated, including deoxidizing procedures limited to 10 days prior to welding and prohibited use of certain cleaning agents. Quality assurance is rigorous, requiring a First Article Test (FAT) for new manufacturers, with one unit submitted for comprehensive testing within 120 calendar days of contract award. Testing includes dimensional checks, a 18-inch free-fall drop test, pneumatic leak detection (with pressure loss thresholds strictly defined), form and fit verification, and coating inspections. The contractor bears all costs related to FAT submission, shipping, and rework if disapproved, and must provide operating and maintenance instructions. Approved paint systems and coating thicknesses are mandated per federal and military standards, with restrictions on ozone-depleting substances. A waiver to FAT is available only to prior suppliers who can prove identical production under the same facility, processes, and within three years, and must submit dual pricing. All containers require desiccant, sealed joints, and nameplates with UID marks, with the Naval Inventory Control Point Philadelphia acting as the contact for serial number assignment and test scheduling. Packaging must conform to MIL-STD-2073, and the contract includes provisions for security, Buy American compliance, small business set-asides, and equal opportunity, reflecting a comprehensive framework for defense-critical supply chain integrity.
Other Metal Container Manufacturing

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332439
New
Federal
81--SHIPPING AND STORAGThis contract solicits the manufacture of containers meeting strict technical and quality standards, with the primary item identified by drawing number 05259-657E001, Revision Latest, produced via rotomolding using plastic shell material. Each container must be uniquely identified with a UID marking in data matrix format per MIL-STD-130, with serial numbers following the format contract#_no_dashes-000X, and must include a nameplate with approved alphanumeric serial numbering obtained from NAVICP. A First Article Test is mandatory unless waived under specific conditions for prior approved suppliers who meet stringent criteria including identical production location, processes, and no prior rejections or deviations. The First Article submission requires one unit delivered within 120 days of contract award to a government-designated test site, with comprehensive testing including dimensional verification, 18-inch free-fall drop testing, and pneumatic leak tests under defined pressure parameters, where any pressure loss over 0.05 psi or deformation exceeding three-quarters of an inch results in disapproval. The contractor bears all costs related to First Article testing, including shipping, repairs, and additional submissions if failed, and must certify that production occurs at the same facility as the First Article. Compliance with ASTM B 841 for zinc-nickel plating, AWS D1.2 for welding, and MIL-C-5541 for cleaning is required, along with one-third unit of desiccant per cubic foot of internal volume. The contract mandates 100% production leak testing using Method 5009 of Federal Test Method Standard 101C, with a threshold pressure loss of 0.025 PSIG after temperature and barometric adjustments. All tooling and manufacturing aids are the contractor’s responsibility, and no Government-furnished equipment applies. Packaging must follow MIL-STD-2073. The closing date for submissions has been extended to August 31, 2026. The solicitation includes multiple regulatory clauses such as Buy American, Equal Opportunity, Security Prohibitions, and Mandatory Use of Workflow Pro, and enforces strict liability limitations and compliance with National Defense priority ratings. Offers must clearly state whether they are submitted with or without waiver of First Article requirements, and failure to comply may result in contract default.
Other Metal Container Manufacturing

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332439
New
Federal
81--SHIPPING AND STORAGThe contract pertains to the procurement of containers manufactured to stringent military specifications, with primary reference to Container Research Corporation drawing number 05259, 530E001-501, latest revision, and associated technical requirements. The container shell is to be made of aluminum, with all manufacturing, testing, and inspection strictly adhering to the referenced drawings, specifications, and contract clauses. Key prohibitions include the use of MIL-W-81381 wire, which must be replaced with SAE-AS22759, and cadmium plating, which is replaced with electrodeposited alkaline Zinc-Nickel Alloy per ASTM B841. Welding must comply with AWS standards for the respective metals, with specific filler materials required for aluminum alloys, and all welds must undergo visual inspection with 5x magnification where necessary, with potential additional non-destructive testing such as dye penetrant as directed by the government. Strict cleaning and deoxidizing procedures must be followed prior to welding, including chemical treatments with approved acids and mechanical cleaning methods that avoid iron-based abrasives to prevent corrosion. Each container must be marked with a Unique Identification (UID) in data matrix format on a nameplate, per MIL-STD-130, and assigned a sequential serial number starting from 0001. A First Article Test (FAT) is mandatory for new manufacturers, requiring submission of one unit for comprehensive testing at a designated government facility in Colts Neck, NJ, within 60 calendar days of contract award. FAT includes dimensional checks, leak testing under 1.00 ± 0.05 psig pressure for 30 minutes, an 18-inch free fall drop test on concrete, form and fit verification with government-supplied components, and final leak retest. The contractor bears all costs related to FAT preparation, shipping, and retesting if disapproved. Approved FAT samples may be counted toward contract quantity if undamaged, but unapproved samples are destroyed. For experienced suppliers, a waiver of FAT may be considered if identical units were produced within the last three years at the same facility without deviations or rejections, provided certification is submitted. All production units must undergo 100% drop testing under the same conditions as FAT. Packaging must comply with MIL-STD-2073, and the contract includes multiple mandatory clauses related to Buy American standards, security exclusions, equal opportunity, warranty limitations, and adherence to the latest
Other Metal Container Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 17 days
View Details
NAICS: 332439
New
Federal
81--SHIPPING AND STORAGThis contract, issued by the Defense Logistics Agency Aviation at Philadelphia, solicits the manufacturing of a plastic container shell using vacuum forming, governed by Naval Air Systems Command drawing 3321AS600 Revision LATEST and associated sub-drawings. The item is a multi-application container requiring strict adherence to quality and production standards, including compliance with AWS welding specifications for steel, aluminum, and stainless steel, and adherence to deoxidizing, cleaning, and material control procedures outlined in MIL-C-5541 and ASTM standards. All units must be marked with a Unique Identification (UID) in data matrix format per MIL-STD-130, and each container must include one-third a unit of desiccant per cubic foot of interior volume. Engineering source approval is mandatory for new manufacturers, and only approved shock mounts may be used, with HA KING SHOCK MOUNT (13008) 7900 listed as an authorized alternative. The contract prohibits chromate conversion coatings containing hexavalent chromium due to RoHS compliance, and the waterproof test per ASTM-D-951 has been deleted, replaced by visual inspection of closures and rivets. A First Article Test (FAT) is required for new suppliers, with one unit to be delivered within 120 calendar days for extensive dimensional, functional, and environmental testing including four 18-inch free-fall drops, initial and final leak tests at 1.00 ± 0.05 psig, and form-fit validation. The contractor bears all costs related to FAT shipment, testing, and rework if disapproved, and any additional submissions must meet government-specified deadlines. Approved First Article units may be counted toward contract delivery if undamaged and not destroyed during testing. Production inspections require sampling of at least one unit per lot, subject to drop and waterproof tests witnessed by government representatives, with rework permitted only once per defective unit. The contract mandates compliance with Buy American and small business set-aside provisions, along with security restrictions and mandatory use of Workflow Pro. Performance is set to conclude by August 31, 2026, and all communications, including drawing requests and UID number assignments, must be directed to the buyer at the designated email address. All tooling, fixtures, and test equipment are the contractor’s sole responsibility unless otherwise specified.
Other Metal Container Manufacturing

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332439
New
Federal
81--SHIPPING AND STORAGThis contract, solicitation SPRPA126RVC19, issued by the Department of Defense through the Defense Logistics Agency Aviation office in Philadelphia, pertains to the procurement of shipping and storage containers governed by Container Research Corp drawing number 05259-934E001, with the latest revision. The contract mandates strict compliance with technical specifications including aluminum construction, electrodeposited alkaline Zinc-Nickel Alloy finish per ASTM B841, and welding standards per AWS D1.1, D1.2, D1.3, and D1.6 depending on material, with specific filler metals required for 6061 and 5000 series aluminum alloys. Each container must bear a Unique Identification (UID) in data matrix format on a nameplate, following MIL-STD-130, and be assigned a serial number in the format contract#_no_dashes-000X. A First Article Test (FAT) is required unless waived for qualified prior suppliers, with strict submission deadlines, test procedures including air pressure leak tests, 18-inch drop tests, and form and fit evaluations, all at the contractor’s expense. The contractor must provide test samples unpainted with light preservative, ensure welding and cleaning processes adhere to precise chemical deoxidizing and mechanical cleaning protocols, and seal crevices with MIL-S-81733 sealant. Each unit must contain one-third cubic foot of desiccant per interior volume, and all welding and process controls must be documented and visible at workstations. The Government will conduct FAT testing with an estimated cost of $20,000, and samples will not be returned unless refurbishment is possible and approved. Only the specified shock mount is approved, and substitutions are prohibited without written authorization. The contract includes Buy American, security, small business set-aside, and quality assurance clauses, and the offer deadline is September 9, 2026. Engineering source approval is mandatory for new manufacturers, and all drawing requests must be directed to the designated buyer.
Other Metal Container Manufacturing

POSTED

about 20 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 332439
New
Federal
81--SHIPPING AND STORAGThis contract, issued under solicitation number SPRPA126RVC07 by the Department of Defense through DLA Aviation at Philadelphia, extends through August 31, 2026, to promote competition for the supply of rotating molded polyethylene containers conforming to Drawing No. 861E001 Revision Latest, as controlled by Container Research Corporation. The item must be manufactured using rotational molding with specific material and finish requirements, including replacement of cadmium plating with electrodeposited alkaline Zinc-Nickel Alloy per ASTM B841. Each container requires a Unique Identification (UID) marking in data matrix format on a nameplate, following MIL-STD-130, with a serial number formatted as contract#_no_dashes-000X. A mandatory First Article Test (FAT) is required for new suppliers, involving dimensional, functional, fit, and leak tests under Federal Test Method Standard 101C, including a 18-inch drop test and pressure retention evaluation, with failure thresholds strictly defined. The contractor is responsible for all FAT sample submission, testing costs, repair, and disposal, with the government estimating $12,000 in testing expenses to be factored into offers. Existing qualified suppliers may request a waiver of the FAT requirement if they can prove identical prior production within the last three years from the same facility without deviations or rejections. Packaging must comply with MIL-STD-2073, and each container must include one-third unit of desiccant per cubic foot of internal volume. All manufacturing must occur in a single facility, and production cannot initiate before FAT approval, with associated costs borne solely by the contractor. The contract enforces Buy American provisions, security exclusions, integrity of unit pricing, and mandatory compliance with WFP Mod Assist and other federal mandates. Communication regarding drawings, UID numbering, FAT arrangements, and nameplate details must be directed exclusively to the designated buyer point of contact via email.
Other Metal Container Manufacturing

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332439
New
Federal
81--NRP,SHIPPING AND STThis contract, identified by solicitation number SPRPA126RVC02 and issued by the Department of Defense’s DLA Aviation at Philadelphia, pertains to the procurement of plastic containers manufactured via rotomolding to drawing number 05259-829E001, revision latest, with strict compliance to military and technical specifications. Each container must be equipped with a Unique Identification (UID) marking in data matrix format as mandated by MIL-STD-130, and affixed with a nameplate containing a contract-specific serial number format. The contract requires adherence to stringent quality controls, including a First Article Test (FAT) with mandatory submission of one unit within 120 calendar days for dimensional, functional, and leak integrity testing, though waivers may be considered for prior approved suppliers who meet specific criteria such as identical production history within the past three years and use of the same facility and processes. All containers undergo 100% production leak testing using pneumatic pressure methods per Federal Test Method Standard 101C, with rejection thresholds for pressure loss and shell deformation, as well as an 18-inch drop test to verify structural integrity. The use of electrodeposited alkaline Zinc-Nickel Alloy finish replaces cadmium plating, and each unit must include one third of a cubic foot of non-dusting desiccant per interior volume. The contractor is solely responsible for procuring all tooling, testing equipment, and shipping costs for FAT samples, none of which will be returned unless approved and refurbished; destroyed samples are irrecoverable. The contract includes mandatory compliance with Buy American provisions, security exclusions, small business set-asides, and prohibitions against unauthorized use of restricted technologies. Payment and invoicing follow Wide Area Workflow instructions, with delivery and shipping coordinated through designated Navy contacts. The solicitation closes on August 31, 2026, and includes a clause allowing contract extension to promote competition. Engineering source approval is required for new manufacturers, and all inquiries regarding drawings, UID numbering, or FAT coordination must be directed exclusively to the designated buyer email provided on the contract’s first page.
Other Metal Container Manufacturing

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332439
New
Federal
81--SHIPPING AND STORAGThis contract, solicitation SPRPA126RVB92, issued by the Defense Logistics Agency Aviation at Philadelphia, seeks suppliers for a specialized shipping and storage container conforming to drawing number 05259, 828E001, latest revision, with an aluminum shell. The item requires strict adherence to military and industry standards including AWS D1.2 for aluminum welding, ASTM B 841 for Zinc-Nickel alloy finish replacing cadmium, and MIL-STD-130 for Unique Identification (UID) marking in data matrix format on a nameplate. The UID serial number must follow the format “contract#_no_dashes-000X” and is to be obtained from the buyer. All containers must include one third of a unit of MIL-D-3464 Type II desiccant per cubic foot of internal volume and sealed at crevices using MIL-S-81733 sealing compound. Welding procedures, material controls, and pre-weld cleaning require rigorous documentation, with deoxidizing limited to ten days prior to welding and mechanical cleaning immediately before welding using approved non-iron abrasives. A First Article Test (FAT) is mandatory unless waived for previous approved suppliers who meet strict criteria, including identical production within the last three years at the same facility without deviations or rejections. The contractor must submit one unit for FAT within 120 calendar days of contract award to a government-specified location, bearing explicit labeling and shipping documentation. The government will perform dimensional, functional, and leak testing, including a free-fall drop test from 18 inches and a 30-minute pressure retention test requiring no more than 0.05 PSIG loss. All FAT costs, including shipping, are borne by the contractor, and samples are typically destroyed during testing. Packaging must follow MIL-STD-2073, and the container must be unpainted with only a light preservative on corrosive areas. The solicitation closes August 24, 2026, and includes mandatory clauses on Buy American, small business set-aside, security prohibitions, workflow compliance, and integrity of unit pricing, with an estimated $10,000 government testing cost factored into bids.
Other Metal Container Manufacturing

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332439
New
Federal
81--SHIPPING AND STORAGThis contract governs the supply of specialized shipping and storage containers manufactured to precise engineering specifications under drawing number 05259-808E001, with the latest revision required. The containers, constructed from aluminum, must undergo rigorous manufacturing, inspection, and testing protocols, including strict adherence to welding standards such as AWS D1.2 for aluminum, proper deoxidizing and cleaning procedures, and the use of approved filler materials like 4043 and 5356 alloys. Each unit must be equipped with a Unique Identification (UID) marking in data matrix format as mandated by MIL-STD-130, and a nameplate providing serial numbers formatted per the contract’s convention. Compliance with environmental and surface treatment requirements is critical, including glass bead blasting with specified media, replacement of cadmium plating with zinc-nickel alloy finish per ASTM B841, and sealing of crevices using MIL-S-81733. A one-third unit of MIL-D-3464 Type II desiccant must be installed per cubic foot of interior volume. The contract mandates a First Article Test (FAT) for new manufacturers, requiring submission of one unit to designated government test facilities in Lakehurst and Picatinny, NJ, where it undergoes dimensional verification, a 18-inch free-fall drop test, and a rigorous 30-minute pneumatic leak test with pressure thresholds set at 1.0 ± 0.1 PSIG. Failure to pass results in mandatory re-submission at the contractor’s expense, and all costs associated with shipping, testing, and refurbishment of FAT samples are the contractor’s responsibility. The contractor must also maintain full control over materials, tooling, and work processes, with no government-furnished equipment permitted. Production units are subject to a 100% leak test using a lower pressure threshold of 0.50 ± 0.025 PSIG, where a pressure loss exceeding 25% of the stabilized level or more than three-quarters of an inch of deformation during pressurization will result in rejection. The contract enforces Buy American provisions, security prohibitions, and small business set-asides with active compliance dates through February 2026, and includes provisions for waiver of FAT requirements for qualified prior suppliers who meet strict criteria regarding recent production history and identical manufacturing conditions. The solicitation deadline is August 27, 2026, and all deliveries must comply with
Other Metal Container Manufacturing

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 335999
New
Federal
70--CONVERTER,ANALOG TOThe solicitation seeks a converter, analog to digital, under NAICS code 335999, issued by the Department of Defense through the Defense Logistics Agency Aviation office in Philadelphia. The proposal must be submitted by July 27, 2026, and includes a wide array of contractual clauses covering critical compliance areas such as Buy American requirements, royalty disclosures, security prohibitions, transportation by sea, and annual representations and certifications. Specific provisions mandate adherence to government payment instructions, integrity of unit pricing, restrictions on liability for high-value items, and protocols for the release of offeror information under the AbilityOne program. Additional directives address equal opportunity for workers with disabilities, value engineering initiatives, and the use of facsimile proposals, while special attention is given to national defense priorities and emergency preparedness through priority rating notifications. The contract also incorporates deviations and updated certifications effective through 2026, requiring strict compliance with evolving federal acquisition standards. The point of contact for inquiries is Gregory Koch, reachable via email and telephone, with the place of performance unspecified but likely tied to DLA’s operational footprint. All submissions must align with the mandated representation and certification requirements, including those tied to free trade agreements and balance of payments programs, and must comply with the most recent security exclusions and facility-level restrictions imposed by the government. The solicitation is open to all eligible contractors with no designated set-aside, and responses must be submitted through the designated SAM.gov portal prior to the deadline. Any failure to adhere to the listed clauses could result in disqualification or contract penalties.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332439
New
Federal
81--SHIPPING AND STORAGThis contract pertains to the procurement of specialized containers governed by stringent quality, manufacturing, and testing requirements, with the primary identification drawing number 583E001, Revision Latest, issued by Container Research Corporation. The containers must be fabricated from aluminum shell material, with welding performed in strict compliance with AWS standards depending on the base metal—AWS D1.1 for steel, AWS D1.2 or MIL-W-22248 Class 4 for aluminum, and others for stainless and sheet steel. Filler metals are prescribed specifically for each alloy: 4043 for 6061, and 5356 or 5556 for 5000 series alloys. All welding areas require meticulous preparation, including chemical deoxidization using approved acid solutions within ten days of welding (reduced to three days if exposed outdoors) and immediate mechanical cleaning prior to welding using stainless steel wire brushes only, avoiding iron-based abrasives. Surface finishing requires glass bead blasting with #8 media at 50–70 PSIG to achieve a uniform matte finish, with media strictly segregated from contamination with other metals. Each container must bear a Unique Identification (UID) in data matrix format per MIL-STD-130, with serial numbers formatted as contract#_no_dashes-000X, and must include a nameplate with the assigned alphanumeric serial number obtained from the designated buyer contact. A mandatory first article test (FAT) is required for new manufacturers, involving dimensional, functional, leak, and free-fall drop tests with the container subjected to a 18-inch drop onto concrete, pressurized to 1.00 ± 0.05 psig, and monitored for pressure loss exceeding 0.05 psi over 30 minutes. The contractor bears all costs associated with FAT, including shipment, rework, and additional submissions if rejected, with the government reserving right to adjust contract terms for delays. A waiver may be granted to previously qualified suppliers who can prove identical production under the same processes and facility within the last three years, but such waivers require dual pricing submission and strict certification. All containers must contain one-third cubic foot of desiccant per interior volume and seal crevices with MIL-S-81733. The contract mandates compliance with Buy American provisions, strict material control, welding inspections using 5X magnification and nondestructive testing as directed, and adherence to Navy-specific protocols for transportation,
Other Metal Container Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 23 days
View Details