83 -- POLY/COTTON CLOTH

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The solicitation number is CT1670-04 and is issued as a Request For Proposals (RFP). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2001-24. The North American Industry Classification System code is 313210 and small business size standard is 1,000 employees. UNICOR, Federal Prison Industries, Inc., intends to enter into a three-year, firm-fixed-price, requirements type contract for polyester/cotton cloth. The quantity requested is as follows: FAB2925 - 500,000 YARDS; FAB3204 - 50,000 YARDS. The quantities are estimated. LINE ITEM 0001, FAB2925, CLTH,POLY/CTT,W/REP,BLACK#385,60"W, USEABLE,I.A.W. AA-55291. LINE ITEM 0002, FAB3284, CLTH,POLY/CTT,W/REP,BLUE-#3376,60"W, USEABLE.I.A.W. AA-55291. THIS REQUIREMENT IS ALL OR NONE. PRODUCTS IN THIS SOLICITATION MUST BE DOMESTIC ONLY, MANUFACTURED IN ITS ENTIRETY IN THE UNITED STATES OF AMERICA. IF YOU OFFER FOREIGN PRODUCTS, YOUR OFFER WILL NOT BE CONSIDERED FOR AWARD. REQUIRED DELIVERY SHALL BE 45 DAYS AFTER RECEIPT OF DELIVERY ORDER. The following FAR clauses and provisions apply to this acquisition: 52.204-6, Contractor Identification Number Data Universal Numbering System (DUNS); 52.211-16, Variation in Quantity, The permissible variation shall be +10%/ -10%; 52.212-1, Instructions to Offerors - Commercial; 52.212-2, Evaluation - Commercial Items, Significant evaluation factors are past performance, ability to conform to the specifications, and price. Past performance is significantly more important than cost or price. The Government may make award without discussions - therefore, the offeror's initial offer should contain offeror's best pricing. Tradeoff Process: It may be in the Government's best interest to consider award to other than the lowest priced offeror or other than the highest technical rated offeror. This process may include tradeoffs among cost/price and non-cost factors and allows the Government to accept other than the lowest priced proposal if the perceived benefits of the highest priced proposal are determined to merit the additional cost.; 52.212-3, Offeror Representations and Certifications - Commercial Items - This must be completed and provided with your offer- The document can be downloaded at the following website: http://www.unicor.gov/procurement/proforms.htm. 52.212-4, Contract Terms and Conditions - Commercial Items; (PARAGRAPH (D) - DISPUTES, REPLACE WITH THE FOLLOWING: 52.233-1 Disputes (October 2003) (DEVIATION) This contract is not subject to the Contract Disputes Act of 1978, as amended (41 U.S.C. 601-613). Disputes arising under or relating to this contract shall be resolved in accordance with clause FAR 52.233-1, Disputes (October 2003)(Deviation), which is incorporated herein by reference. The Contract shall proceed diligently with performance of this contract, pending final resolution of any dispute arising under the contract. To view the full text clause FAR 52.233-1, Disputes (October 2003) (Deviation), go to www.unicor.gov, select - Business Opportunities, then select - Deviation. 52.212-5, Contract Terms and Conditions Required to Implement Statues or Executive Orders - Commercial Items, which includes 52.203-6, Restrictions on Subcontractor Sales to the Government, with Alternate I and 52.232-33, Payment of Electronic Funds Transfer - Central Contractor Registration; 52.215-6, Place of Performance, Please include the name and address of the supplier (s); (a) The offeror or respondent, in the performance of any contract resulting from this solicitation, [ ] intends, [ ] does not intend [check applicable block] to use one or more plants or facilities located at a different address from the address of the offeror or respondent as indicated in this proposal or response to request for information. (b) If the offeror or respondent checks - intends in paragraph (a) of this provision, it shall insert in the following spaces the required information: Place of Performance Name and Address of Owner (Street Address, City, and Operator of the Plant State, County, Zip Code) or Facility if Other than Offeror or Respondent ____________________ _______________________ ____________________ _______________________ 52.216-18, Ordering, Orders may be issued under the resulting contract from the date of award through three (3) years thereafter; 52.216-19, Order Limitations, Order Limitation applies with (a) minimum order of 5,000 YARDS per line item (b) (1) the Contractor is not obligated to honor any order for a single item in excess of 50,000 YARDS per line item (b)(2) the Contractor is not obligated to honor any order for a combination of items in excess of 100,000 YARDS. Contractor will not be obligated to honor a series of orders from the same ordering office, within a 10 day period that together call for quantities exceeding the maximum order limitations. The Contractor shall honor any orders exceeding the maximum order limitations unless the order, or orders, is returned to the ordering office within five calendar days after issuance with a written statement expressing the contractor's intent not to ship; 52.216-21, Requirements, The Contractor shall not be required to make any deliveries under this contract after 45 days after contract expiration; 52.219-1, Small Business Program Representation; The North American Industry Classification System (NAICS) code for this acquisition is 313210. The small business size standard is 1,000 employees. 52.219-22, Small Disadvantaged Business Status; 52.223-11, Ozone-Depleting Substances; 52.232-15, Progress Payments Not Included; 52.232-18, Availability of Funds; 52.233-2, Service of Protest, Protests, as defined in section 33.101 of the Federal Acquisition Regulation, that are filed directly with an agency, and copies of any protests that are filed with the General Accounting Office (GAO), shall be served on the Contracting Officer by obtaining written and dated acknowledgment of receipt from Richard A. Broadwater, Procurement Branch, 400 First Street, NW, Washington, DC 20534. The copy of any protest shall be received in the office designated above within one day of filing a protest with the GAO; 52.233-3, Protest after Award; 52.242-15, Stop-Work Order; 52.246-15, Certificate of Conformance; 52.246-16, Responsibility for Supplies; 52.247-34, F.O. B. Destination, Delivery shall be FOB destination to UNICOR, FCI Miami, 15801 SW 137th Avenue, Miami, FL 33177. The COTR at FCI Miami is Pete Diaz, Telephone +1 (555) 000-0000. Any questions or problems regarding payment should be directed to Stephanie Gatz, Business Manager, +1 (555) 000-0000. DELIVERY HOURS: Normal delivery hours are as follows: 7:30 am - 11:00 am and 12:00 noon - 2:30 pm, Monday through Friday, notwithstanding emergencies and Federal holidays; 52.253-1, Computer Generated Forms; FPI 1000D, Packaging and Marking - Preservation, packaging, and marking for all items covered by this contract shall be in accordance with commercial practice and adequate to insure acceptance by common carrier and safe arrival at destination. The contract number should be on or adjacent to the exterior shipping label. Each package received must be marked for type and quantity. A Certificate of Conformance must accompany each shipment. All shipments should be labeled as follows: a. Vendor name b. Purchase Order number and/or Contract number c. Item description d. Item quantity and weight e. Other pertinent information FPI 1000E1, Supplement: LCL APPR (7), IDENTIFICATION OF QUALIFIED LABORATORY AND SOURCE SAMPLING SOURCE SELECTION, Reference FAR Clause 52.246 2, INSPECTION OF SUPPLIES FIXED PRICE (AUG 1996), paragraph (i) (1) AND (2), inspection of material to source sampling, the following clause titled: IDENTIFICATION OF QUALIFIED LABORATORY AND SOURCE SAMPLING is hereby incorporated into and made a part of this contract: (a) The offeror or bidder shall indicate in paragraph (e) below the name and address of the laboratory or laboratories where components or end items will be tested during the course of any resultant contract. A Qualified Laboratories List (QLL) is available through the Commander, DPSC, 2800 South 20th Street, Philadelphia, PA 19101, ATTN: DPSC POL. Any laboratory proposed by the contractor not on the QLL is subject to the approval of the Contracting Officer. (b) Government QAR will cut samples from a lot at the textile component source and send them for testing to the Qualified Laboratory (QL) cited below. (The acceptability of each lot will be determined through the testing of these samples). In addition, the QAR will simultaneously cut samples from the same rolls of material and send them to the DPSC Laboratory. For end items, duplicate samples will be drawn. Source sampling procedures are detailed further in DPSC Manual, Quality Systems Requirement, 4155.3, which is incorporated by reference. (c) The prime contractor will notify the DPSC Laboratory (DPSC POL #215 '737 7052) in writing at least ten (10) days in advance when lots are to be presented to allow Government witnessing of QL testing. If the Government intends to witness testing, a representative from the DPSC laboratory will notify the QL. In the absence of Government notification, testing should proceed as scheduled. (d) If a laboratory is removed from the QLL during the course of a contract, DPSC will perform the required testing for up to 30 calendar days from the date of removal. The contractor is responsible for securing the services of another QL during this period. The charge for testing will be the DPSC Laboratory's effective cost rate on the date of testing. (e) Any change in the laboratory (laboratories) specified below is prohibited unless approved in advance by the Contracting Officer: NAME AND ADDRESS OF LABORATORY: [ ]. COMPONENT IDENTIFY: [ ]. NAME AND ADDRESS COMPONENT SOURCE: [ ]. * When a single lot of material requires testing by more than one laboratory for difference characteristics, list the name of the secondary laboratory and test characteristics below: NAME AND ADDRESS OF LABORATORY: [ ]. COMPONENT IDENTIFY: [ ]. TEST CHARACTERISTICS: [ ]. (f) It is solely the prime contractor's responsibility to shcedule QL testing and to obtain test reports. The cost of QL testing shall also be borne by the prime contractor. (g) Shipment of component materials to the prime contractor need not be defereed pending test results except when shade approval is required (see paragraph (h)). Cutting production lots without a passing QL test report on the corresponding samples is done at the contractor's own risk. (h) Shade evaluation is acceptance testing. Therefore, component lots may not be shipped to the prime contractor until the DPSC Laboratory accepts the shade of the material. FPI 1000F1, Delivery Order - Orders shall customarily be made by phone, with subsequent written confirmation containing the following information: a. Date of order b. Contract number and order number c. Item number and description, quantity, and unit price d. Delivery or performance date e. Place of delivery f. Shipping instructions g. Accounting data h. Any other pertinent information Delivery shall be 45 days after receipt of delivery order. The period of performance for this contract will be from the date of award through three (3) years. FPI 1000H1, ECONOMIC PRICE ADJUSTMENT Twelve months after contract award date, contract prices for the succeeding twelve month period may be adjusted in accordance with the change in the Producer Price Index for Poly/Cotton Fabric (Product Code 313210) from the date of award to the date of adjustment. IT IS THE CONTRACTOR'S RESPONSIBILITY TO REQUEST THIS ADJUSTMENT. Adjustments may be requested for a period not to exceed 30 days after the eligible adjustment date. Requests that are made after the 30 day limit will not be honored and the contract pricing will not be adjusted. The contractor shall submit any requests for adjustments in writing to the Contracting Officer. Requests shall include a copy of the relevant index and must be within the allowed time period for adjustment. Any adjustments authorized as a result of the adjustment request will not be retroactive. The date the completed request is received by the Contracting Officer will be the effective date of any changes in price. The contractor also is required to request downward price adjustments. All downward adjustments will be retroactive to the authorized adjustment date as specified in this clause. If downward price adjustments are not requested and this is later revealed through audits or otherwise, the contractor shall reimburse the Government the amount overcharged plus interest. Interest will be computed at the rate set annually by the Secretary of the Treasury for late contract payments. Interest will accrue from the date the adjustment should have been made. In computing any contract price adjustment, the most recently published index as of the date of award will be compared to the most recently published index as of the date of adjustment. No adjustment shall be made if the referenced change is less than 2%. Total upward adjustment for the contract period, including any option periods, shall not exceed 10%, based on the original or option period contract price; downward adjustments are not limited. Indices are available from the Bureau of Labor Statistics, 600 E Street N.W., Washington, DC 20212, telephone +1 (555) 000-0000 or www.bls.gov. FPI 1000I1, Preferences for Certain Domestic Commodities, (a) The Contractor agrees to deliver under this contract only such of the following articles that have been grown, reprocessed, reused, or produced in the United States, its possessions, or Puerto Rico-- (1) Food; (2) Clothing; (3) Tents, tarpaulins, or covers; (4) Cotton and other natural fiber products; (5) Woven silk or woven silk blends; (6) Spun silk yarn for cartridge cloth; (7) Synthetic fabric, and coated synthetic fabric; (8) Canvas products; (9) Wool (whether in the form of fiber or yarn or contained in fabrics, materials, or manufactured articles); or (10) Any item of individual equipment manufactured from or containing such fibers, yarns, fabrics, or materials. (b) This clause does not apply-- (1) To supplies listed in FAR 25.108(d)(1), or other supplies for which the Government has determined that a satisfactory quality and sufficient quantity cannot be acquired as and when needed at U.S. market prices; (2) To foods which have been manufactured or processed in the United States, its possessions, or Puerto Rico; or (3) To chemical warfare protective clothing produced in the countries listed in subsection 225.872-1 of the Defense FAR Supplement; FPI 1000K2, Subcontract Certification, This contract does ( ) does not ( ) provide for any subcontracting possibilities. If answer is in the affirmative, offeror will submit a subcontracting plan in accordance with the requirements of FAR 52.219-9, FPR Temp. Reg. 50; FPI 999.999-9, Business Management Questionnaire - This must be completed and provided with your offer- The document can be downloaded at the following website: http://www.unicor.gov/procurement/proforms.htm. PROPOSAL SUBMISSION REQUIREMENTS: Each proposal package shall consist of the following completed and signed documents: SF1449, all amendments issued, copy of current representations and certifications for commercial items (FAR 52.212-3), three Business Management Questionnaires of contracts that are of similar or like items and an ACH form. A completed ACH form must be on file prior to contract award - This document can be downloaded at the following website: http://www.unicor.gov/procurement/proforms.htm. Implementation of the Central Contractor Registration (CCR) was mandated and effective October 1, 2003. ALL CONTRACTORS MUST REGISTER in the CCR prior to award. For additional information and to register, go to www.ccr.gov. As mandated by the Department of Justice, all contractors must register in the NIH Contractor Performance System at the time of award. The web address is: http://cps.od.nih.gov. All offers shall be submitted by the date and time specified (July 23, 2004 @ 2:00 PM) to the attention of Mellisa J. Rhinehart, Contracting Officer, UNICOR Clothing and Textiles-6th Floor, 400 First Street, NW, Washington, DC 20534. Offers should be submitted on the SF1449. OMB Clearance 9000-0136 expires 02/29/2004. The date and time for receipt of proposals is Friday, July 23, 2004 at 2:00 PM Eastern Standard Time. Offer must indicate Solicitation No. CT1670-04, time specified for receipt of offer, name, address and telephone number of offeror, technical description of the items being offered in sufficient detail to evaluate compliance with the requirements in the solicitation. All offerors that fail to furnish required representation and certification information or reject the terms and conditions of the solicitation may be excluded from consideration. Any amendments hereby issued to this solicitation shall be synopsized in the same manner as this solicitation and must be acknowledged by each offeror. Offerors must hold prices firm for 60 calendar days from the date specified for receipt of offers. Offers or modifications shall be received by the date and time specified in this solicitation (July 23, 2004 @ 2:00 PM) or they shall not be considered for award. Questions regarding this requirement may be addressed in writing to Mellisa Rhinehart, contact@example.gov. All FAR forms, clauses and provisions necessary to submit an offer may be accessed at the following web site: http://www.arnet.gov/far. This combined synopsis/solicitation and necessary forms are available on web site: http://www.eps.gov or http://www.unicor.gov/procurement/proclothing.htm. Interested parties may obtain copies of Military and Federal Specifications and Standards, Qualified Product Lists, Military Handbooks, and other standardization documents from the DoD Single Stock Point (DODSSP), in Philadelphia, PA. Most documents are available in Adobe PDF format from the ASSIST database via the Internet at http://assist.daps.dla.mil. Users may search for documents using the ASSIST-Quick Search and, in most cases, download the documents directly via the Internet using standard browser software. Documents not available for downloading from ASSIST can be ordered from the DODSSP using the ASSIST Shopping Wizard, after establishing a DODSSP Customer Account by following the registration procedures or by phoning the DoDSSP Special Assistance Desk at +1 (555) 000-0000 (DSN: 442-2179). Users not having access to the Internet may contact the DODSSP Special Assistance Desk at +1 (555) 000-0000 (DSN: 442-2179) or mail requests to the DODSSP, Bldg. 4/D, 700 Robbins Avenue, Philadelphia, PA 19111-5094. Patterns, Drawings, Deviations Lists, Purchase Descriptions, etc., are not stocked at the DODSSP. Copies of Federal Specifications, Standards and Commercial Item Descriptions cited in this solicitation may be obtained from GSA, Federal Supply Service, Specifications Section, Suite 8100 470 LEnfant Plaza, SW, Washington, DC 20407, Phone: +1 (555) 000-0000 and Facsimile +1 (555) 000-0000.