Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

ACAN - Mass Spectrometer

Active

WS5851935974International

Response Deadline09/11/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Department of Public Works and Government Services is seeking a Chemical Ionization Time-of-Flight Mass Spectrometer (CIMS) for the Earth System Research and Integration Division of Environment and Climate Change Canada. This field deployable instrument will be used at stationary ground sites and mobile platforms across Canada to perform quantitative ambient air measurements of volatile organic compounds with high sensitivity, chemical selectivity, and rapid time response. This solicitation, identified by number WS5851935974, is for a federal project with performance taking place in Toronto. Interested parties must submit their responses by the deadline of September 11, 2026, as late submissions will not be accepted. The primary point of contact for this procurement is Guo Liao.

General Info

Procurement of a CIMS instrument for Environment and Climate Change Canada by September 2026.

Agency

Government of Canada → Department of Public Works and Government ServicesView Agency

NAICS

334516 - Analytical Laboratory Instrument ManufacturingView NAICS

Place of Performance

Toronto, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation

PostedAug 31

Solicitation

Response DeadlineSep 11

Submission deadline

Response Deadline

09/11/2026, 07:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGovernment of Canada → Department of Public Works and Government Services

Contacts1 person available

OfficeN/A

Organization / Agency

Government of Canada → Department of Public Works and Government Services

View Agency Profile

Office AddressN/A

Contacts

Liao Guo (SPAC/PSPCContracting Authority

contact@example.gov

Full Description

Show more

Please note that late submissions will not be considered or accepted. The Earth System Research and Integration Division (ESRID) of Environment and Climate Change Canada (ECCC) requires a Chemical Ionization Time-of-Flight Mass Spectrometer (CIMS), for quantitative ambient air measurements of volatile organic compounds VOCs across Canada. The field deployable instrument is for use at stationary ground sites and mobile platforms, to measure a wide range of VOCs with high sensitivity, chemical selectivity and time response.

Similar Contracts

Same NAICS industry code

Supply and Delivery of up to Eight (8) Continuous Particulate Mass Monitors for Ambient Air Monitoring

Solicitation # tender_22074

The Government of Ontario, through the Ministry of the Environment, Conservation and Parks, is seeking a qualified vendor to supply and deliver up to eight Federal Equivalent Method approved continuous particulate mass monitors for ambient air monitoring. The requirement includes up to two monitors capable of measuring PM2.5, PM10, and PM10-2.5, and up to six monitors specifically for PM2.5. These devices will support provincial air monitoring, compliance, emergency response, and environmental assessment activities. The selected vendor must provide the equipment, delivery, warranty support, technical assistance, and optional user training. Deliveries will be made to Ministry locations in Stoney Creek and Etobicoke, with initial shipments due by March 31, 2027, and the final unit delivered by June 30, 2027. Responses to this solicitation are due by September 30, 2026.

Environment, Conservation and Parks

POSTED

about 13 hours ago

DEADLINE

Supply of Control Assembly (Critical Application Item)This subcontract through the Department of Defense ASC Supplier OEM Division involves the procurement and delivery of six Control Assembly units, identified by NSN 4920017063158 and Part Number 4080205. Due to its classification as a Critical Application Item, the order mandates strict adherence to military standards for marking and packaging, as well as a zero-defect quality assurance requirement. The opportunity was posted on August 31, 2026, with a response deadline of September 8, 2026. The work falls under NAICS code 334516 and the place of performance is located in Tracy, California.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 16 hours ago

DEADLINE

Supply of Linear Electro-Mechanical ActuatorThis subcontract, issued by the Department of Defense Land Supply Chain, requires the manufacture and delivery of one linear electro-mechanical actuator built to specific military standards. The scope of work encompasses the full production process, including specialized packaging, labeling, and traceable shipping to the USS MARINETTE LCS 25. The procurement falls under NAICS code 334516 and was posted on August 31, 2026, with a response deadline of September 11, 2026. Performance of the contract is designated for FPO 34088.

LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

Manufacturing of Thermocouple Temperature Indicators (MIL-I-9343C Compliant)This subcontract opportunity with the Department of Defense, specifically the ASC Supplier Oper AE and AF Div, involves the full manufacturing of thermocouple temperature indicators. The project requires the design, assembly, calibration, and testing of these indicators to ensure full compliance with MIL-I-9343C military performance and environmental standards. The contract is designated as a Total Small Business Set-Aside under FAR 19.5 and falls under NAICS code 334516. Interested parties must submit their responses by September 17, 2026, following the posting date of August 31, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

MEASURING TUBE, GAS ANA

Solicitation # SPE2DH-26-T-6323

This contract is for the procurement of Draeger carbon dioxide measuring tubes used to analyze carbon dioxide content in compressed gases. The tubes are round glass with melted tips, featuring a measuring range of 100 to 3000 parts per million for one liter of air. They are issued in packages of 10 units each, with a total quantity of two packages requested under purchase request 7018116402. Delivery is required within 20 days after receipt of the order. The items are subject to a non-extendable shelf life of 24 months, and no more than three months may have elapsed from the date of manufacture to the date of delivery. Packaging must meet commercial medical standards, ensuring units are sealed and protected from breakage, with marking compliant with Medical Marking Standard No. 1. The contract also incorporates DLA master lists for technical and quality requirements, as well as regulations regarding covered defense information and the removal of government identification from non-accepted supplies.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 16 hours ago

DEADLINE

Seebeck & Resistivity Measurement Device

Solicitation # TAMU-28-EQUI-ITB-1725

Texas A&M University has issued a solicitation for the procurement of a Seebeck and Resistivity Measurement Device under solicitation number TAMU-28-EQUI-ITB-1725. This invitation for bid is managed by the state agency and is open for responses until September 7, 2026, at 7:00 PM. Interested parties should direct all inquiries to the primary point of contact, Danielle Toler. Detailed specifications regarding the required equipment are provided in the items section of the bid, and the full submission process is hosted via the SciQuest procurement portal.

Texas A&M University

POSTED

about 18 hours ago

DEADLINE

Purchase closed-loop chiller

Solicitation # N0017326P1301409105

The Naval Research Laboratory intends to award a sole source purchase order to Fisher Scientific Company LLC for the procurement of a closed-loop chiller. This action is being conducted under Simplified Acquisition Procedures in accordance with FAR Part 13.106-1(b) for purchases not exceeding 250,000 dollars. The requirement is classified under NAICS code 334516 and Product Service Code 6640. This notice serves as an intent to award and is not a request for competitive proposals. However, interested parties may submit evidence of their capability to respond to the requirement by September 3, 2026, to demonstrate that competition would be advantageous to the government. All correspondence regarding this intent, identified by notice number N00173-26-P-1301409105, will be reviewed at the discretion of the government to determine if a competitive procurement is necessary.

Naval Research Laboratory

POSTED

about 21 hours ago

DEADLINE

Handheld XRF Analyzer

Solicitation # 1240LP26Q0165

Solicitation number 1240LP26Q0165 is a request for quotations for the purchase of one portable, hand-held X-Ray Fluorescence (XRF) analyzer to support the USDA Forest Service, Rocky Mountain Region. This acquisition is a total set-aside for small business concerns under NAICS code 334516, Analytical Laboratory Instrument Manufacturing, with a size standard of 1,000 employees. The procurement is being managed by the Department of Agriculture, with the place of performance located in Lakewood, Colorado. Interested vendors must submit any questions by September 4, 2026, and final quotations are due to Westley Bisson by September 11, 2026, at 1600 MT.

Csa Intermountain 4 Usda-Fs

POSTED

about 21 hours ago

DEADLINE

Solicitation - GPA requirement of new hematology analyzers, all associated equipment, consumables, installation, validation, training and warranty support

Solicitation # 75H70626Q00184

The Great Plains Area Indian Health Service is seeking a 100% total small business set-aside contract for hematology analyzers and related services across various facilities in South Dakota and North Dakota. This is a firm-fixed-price, indefinite-delivery/indefinite-quantity contract utilizing a cost-per-reportable-result pricing model. The agreement includes one base year and four one-year option periods, with an estimated ceiling of less than 2 million dollars and a minimum guarantee of 1,000 dollars. The selected contractor must provide new hematology analyzers with specific capabilities, including automated CBC with 6-part differential and LIS interface support, along with all necessary reagents, consumables, installation, validation, and training. The scope also covers a twelve-month full warranty and ongoing maintenance, with required onsite service responses within 48 hours for hospitals and the next business day for clinics. Quotes are due by September 18, 2026, and will be evaluated based on technical acceptability, price, and contractor responsibility.

Great Plains Area Indian Health Svc

POSTED

about 21 hours ago

DEADLINE

Semiconductor Process Residual Gas Analyzer

Solicitation # 1333ND26QNB640573

Solicitation 1333ND26QNB640573 is a Request for Quotation issued by the Department of Commerce NIST for a semiconductor-grade Process Residual Gas Analyzer. The equipment will be utilized by the Chemical Process and Nuclear Measurements Group within a CHIPS R&D Metrology program to develop digital twin technology for semiconductor manufacturing. The RGA is intended for use as an online process diagnostic on flow systems, such as ALD reactors, and must be compatible with process gases as well as metal halide and low-volatility organometallic precursors. This procurement is open for full and open competition under NAICS code 334516 for Analytical Laboratory Instrument Manufacturing. The performance location is based in Gaithersburg, Maryland. Interested parties must submit their quotations by the response deadline of September 14, 2026.

Department Of Commerce Nist

POSTED

about 21 hours ago

DEADLINE

MTS Assured Maintenance Plan (AMP)

Solicitation # FA860126Q0125

The United States Air Force, through the Air Force Life Cycle Management Center at Wright-Patterson Air Force Base, is conducting market research to identify capable sources for the preventive and remedial maintenance of MTS laboratory equipment. This effort is being performed on behalf of the Air Force Institute of Technology to determine if the resulting contract should be a full and open competition or a small business set-aside. Interested parties must submit a capability package including their company details, CAGE code, UEI, and business size status under NAICS code 334519. All respondents must be registered in the System for Award Management database. Submissions are due via email to the designated contracting officials by 11:00 AM Eastern Time on August 27, 2026.

FA8601 Aflcmc Pzio

POSTED

about 21 hours ago

DEADLINE

6640--Albany VAMC PLMS MALDI NEW CONTRACT FY 27 (VA-27-00006444)

Solicitation # 36C24226Q0957

The Department of Veterans Affairs, through the VISN 02 Network Contracting Office, has issued a notice of intent to pursue a non-competitive sole source procurement with Beckman Coulter. The objective is to acquire a Bruker Maldi Biotyper Sirius CA system for the Albany VA Medical Center in New York. This action is being conducted under FAR Parts 12 and 16, with Beckman Coulter identified as the only responsible source capable of meeting the specific requirements. This announcement serves as a formal notice of intent and is not a request for formal proposals, quotes, or technical and cost submissions. The procurement falls under NAICS code 334516 for Analytical Laboratory Instrument Manufacturing and Product Service Code 6640 for Laboratory Equipment and Supplies. All inquiries regarding this action should be directed to the primary point of contact, Contract Specialist Lorraine Hussain.

242-NETWORK Contract Office 02 (36C242)

POSTED

about 21 hours ago

DEADLINE

More opportunities from Government of Canada → Department of Public Works and Government Services

Same awarding agency

EC016-270543 - CBSA St. Leonard Port of Entry Redevelopment Design

Solicitation # WS5824003479

Public Services and Procurement Canada, acting on behalf of the Canada Border Services Agency, is soliciting professional architectural services for the design of a new Port of Entry facility in St. Leonard, New Brunswick. The project requires a prime architectural consultant, supported by a multidisciplinary team of subconsultants, to deliver comprehensive design services under the Architecture & Interior Design Supply Arrangement E0225-152290. A total of 24 pre-qualified architectural firms have been invited to submit proposals, including prominent practices such as Stantec Architecture, Turners Fleischer Architects, Fougere Menchenton Architecture, and DSRA Architecture, among others. The solicitation, identified as EC016-270543 under reference WS5824003479, was posted on August 10, 2026, with a proposal deadline set for September 3, 2026. The work will be performed in New Brunswick and is managed by Alexandria Dwyer of PSPC as the contracting authority, with all details and requirements outlined in the official solicitation document.

Architectural Services

POSTED

DEADLINE

F1782-26C147 - CCGS Laurier - Three-Way Temperature Control Valve

Solicitation # WS5815142609

The Department of Public Works and Government Services is soliciting offers for the supply of one complete automatic temperature control valve assembly for the sea water side of the central cooling water system on the CCGS Sir Wilfrid Laurier. The equipment must be delivered to Sidney, British Columbia. The contract includes a provision for the buyer to exercise an option to purchase an additional system by March 31, 2028. This opportunity is conditionally limited to Canadian services, and all offerors must complete the Canadian Content certification in the Offeror Declaration Form. While Canadian suppliers are prioritized, suppliers from applicable trading partners and non-trading partners are also eligible, provided they are not subject to international sanctions. The response deadline for this solicitation is September 2, 2026.

Industrial Valve Manufacturing

POSTED

DEADLINE

EB144-270390 – ITT - BIO - Wharf Epoxy Injection Repairs – Dartmouth Nova Scotia

Solicitation # WS5792247656

The contract solicitation EB144-270390, identified by solicitation number WS5792247656, seeks qualified offerors to supply all materials, labor, equipment, and supervision necessary to perform epoxy injection crack repairs on the existing concrete wharf and pier faces at the Bedford Institute of Oceanography in Dartmouth, Nova Scotia. This is an Information Technology Query (ITQ) aimed solely at establishing a source list of eligible contractors and does not involve the release of detailed tender information at this stage. All interested parties must submit inquiries exclusively to the Contracting Authority, Dylon Leonard, at dylon.leonard@tpsgc-pwgsc.gc.ca. The solicitation was posted on July 15, 2026, with responses due by August 4, 2026, and is issued by the Department of Public Works and Government Services on behalf of the Government of Canada under federal procurement protocols. The work location is specified as Nova Scotia, with no further details provided regarding set-asides or NAICS classifications.

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE

W6890-260088 - Janitorial Services

Solicitation # WS5612321949

Bids for W6890-260088 — Janitorial Services must be submitted no later than September 8, 2026 at 14:00 EDT, with any submissions received after this deadline deemed non-responsive. Access to the full Request for Proposal and all attachments requires a logged-in SAP Business Network account and a completed Government of Canada profile. A mandatory site visit is required as part of the bidding process. The contract encompasses janitorial cleaning services across all areas of CFB North Bay, including satellite locations, on both scheduled and as-needed bases. The initial contract term runs from March 1, 2027 to February 28, 2030, with two optional one-year extensions available. Bidders must comply with all mandatory technical criteria outlined in the RFP, meet applicable security requirements, and submit pricing exclusively in Canadian funds according to the Annex Basis of Payment. The Buy Canadian Policy applies to this procurement, and all submissions must adhere to its stipulations. All inquiries should be directed to Krista Gunson, Contracting Authority, at krista.gunson@tpsgc-pwgsc.gc.ca.

Janitorial Services

POSTED

DEADLINE

E60MC240001-A1 – RFSA Refresh for Small Vessels – General Industry

Solicitation # WS5491670965

The Government of Canada is issuing a Request for Supply Arrangements to establish a qualified supplier list for the procurement of Rigid Hull Inflatable Boats, Aluminum Vessels, and Fibre Reinforced Plastic Vessels to support various federal departments and agencies on an as-needed basis. Suppliers must submit offers through RFSA E60MC-240001-A1, with separate submissions required from Indigenous organizations under E60MC-240001-B1, though both will contribute to a single unified supplier list organized by vessel type as defined in Annex Vessel Streams. The solicitation is open to both general industry and Indigenous businesses, with no set-aside classification, and participation is contingent upon meeting all submission requirements outlined in the solicitation. The opportunity is managed by the Department of Public Works and Government Services under the solicitation number WS5491670965 and was posted on July 14, 2026, with responses due by July 31, 2031. All vessels will be supplied throughout Canada as required by federal entities, and the sole point of contact for inquiries is Dianne Tinkess, Contracting Authority at Public Services and Procurement Canada. Suppliers are encouraged to review all technical, logistical, and compliance criteria before submitting their offers to ensure alignment with federal procurement standards and vessel specifications.

POSTED

DEADLINE

in almost 5 years

Installation services and security related work on PSPC's Lenel and Bosch Physical Security Systems

Solicitation # 20270243

The Department of Public Works and Government Services is seeking a certified Lenel Value-Added Reseller and Bosch Intrusion Systems provider to perform installation services and security-related work on the Lenel and Bosch Physical Security Systems for Public Services and Procurement Canada. This federal solicitation, numbered 20270243, requires specialized technical expertise to maintain and implement these specific security infrastructures. Interested parties must follow the detailed instructions provided in the RFP to submit a valid proposal, as bids sent directly to the Contracting Authority will be rejected. The deadline for responses is September 16, 2026, at 7:00 PM. All inquiries and submissions should be coordinated through the designated procurement process to ensure compliance with the stated terms and conditions.

Security Systems Services (except Locksmiths)

POSTED

DEADLINE

MINERVA Initiative – Uncrewed Ground System for Surveillance and Reconnaissance

Solicitation # EN578-24ISC4/93

The MINERVA Initiative, sponsored by the Department of National Defence and the Canadian Army, seeks an innovative, domestically produced uncrewed ground system (UGS) for surveillance and reconnaissance. This challenge is specifically open for Phase 2 prototype development for solutions with a technology readiness level between 5 and 9. The goal is to provide soldiers with a durable, easy-to-maintain alternative for persistent surveillance and reconnaissance that can operate in complex battlespaces while minimizing risk to personnel. The required system must include a ground vehicle, sensor payload, ground control station, radio, battery with charger, and a remote antenna. Mandatory technical specifications include an operational temperature range of -20C to +40C, a maximum unladen weight of 410kg, a minimum operational radius of 3km, and the ability to navigate various terrains and gradients. The project offers maximum funding of 500,000 CAD per contract for a duration of up to 15 months, with an estimated five contracts to be awarded. Proposals must be submitted by September 10, 2026.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

W0113-27CS14 - Pulse Laser Cleaning Machine

Solicitation # WS5814391855

The Government of Canada, through the Department of Public Works and Government Services, is soliciting offers for the procurement of one Pulse Laser Cleaning Machine for the Department of National Defence. This solicitation is subject to the Policy on Reciprocal Procurement, with the final delivery of all items required by November 30, 2026. The place of performance is designated as Ontario, excluding the National Capital Region. All bid submissions and supporting documentation must be received by September 21, 2026, at 14:00 EDT. It is critical to note that this specific deadline supersedes any closing times listed on Ariba Discovery or CanadaBuys, and any submissions received after this time will be declared non-responsive. The primary point of contact for this solicitation is Christina Bellotti-Ramzan.

POSTED

DEADLINE

EZ899-270548 – Phase 1 - Convert Existing Lighting to LED - A1 to A23 and Building 1

Solicitation # WS5839099535

This federal solicitation, issued by the Government of Canada's Department of Public Works and Government Services, involves the Phase 1 conversion of existing lighting to LED at the Mission Minimum institution. The project focuses on buildings A1 through A23 and Building 1, requiring the replacement of various interior and exterior fixtures, including ceiling mounts, wall packs, exit lights, emergency light heads, downlights, and both surface and recessed fluorescent fixtures. The work will be performed in British Columbia under solicitation number WS5839099535. Interested parties must submit their responses by the deadline of September 4, 2026. Janie Leung serves as the primary contracting authority for this procurement opportunity.

POSTED

DEADLINE

F3065-260248 - Propeller Shaft, CCGS Ile St-Ours - RFP

Solicitation # WS5825784277

Public Works and Government Services Canada, acting on behalf of the Canadian Coast Guard, is seeking proposals for the procurement of one new propeller shaft and two accompanying keys for the CCGS Ile St-Ours. The equipment must be certified by the American Bureau of Shipping and delivered to Quebec, Quebec. This solicitation, identified by number WS5825784277, was posted on August 13, 2026, with a response deadline of September 2, 2026. The project is managed by the Department of Public Works and Government Services, with Gabriel Piras serving as the primary contracting authority.

Ship Building and Repairing

POSTED

DEADLINE

W684Q-264141 - Laboratory Testing - RFSO

Solicitation # WS5609648156

The contract titled W684Q-264141 for Laboratory Testing under solicitation number WS5609648156 is issued by the Government of Canada through the Department of Public Works and Government Services. It is categorized under NAICS code 541380, indicating it pertains to professional, scientific, and technical services related to testing laboratories. The solicitation was posted on July 27, 2026, with a deadline for responses set for August 11, 2026, at 7:00 PM Eastern Time. The place of performance is located in British Columbia, though no specific city or postal code is provided. The primary point of contact for inquiries is Nicki Arrieta, Contracting Authority, reachable via email at nicki.arrieta@tpsgc-pwgsc.gc.ca. This solicitation does not specify a set-aside program, meaning it is open to all eligible bidders without preference based on business size or classification.

Testing Laboratories and Services

POSTED

DEADLINE

Managed Web Service for Canada.ca

Solicitation # WS5765538034

The contract is for a Managed Web Service solution to support Canada.ca, under solicitation number WS5765538034, issued by the Department of Public Works and Government Services on behalf of the Government of Canada. All bids must be submitted by August 07, 2026, at 2:00 PM EDT, and any submissions received after this time will be deemed non-responsive, regardless of the originally posted deadline. The requirement is classified under NAICS code 518210 and is a federal solicitation with no set-aside provisions. Performance of the contract must take place in Canada’s National Capital Region. The primary point of contact for inquiries is Bronwyn Knight2, Contracting Authority, reachable via email at bronwyn.knight2@tpsgc-pwgsc.gc.ca. The official posting can be accessed through the Canada Buys portal.

Computing Infrastructure Providers, Data Processing, Web Hosting, and Related Services

POSTED

DEADLINE