This Combined Synopsis/Solicitation opportunity from Department Of Health And Human Services was posted on January 16, 2024. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Accreditation of CBER's Laboratory Quality System and Reference Materials Production

Closed

75F40124R00024Federal

Submission Closed01/17/2024, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

Joliet Job Corps-Request for Quote Asbestos Testing & Abatement

Solicitation # Joliet JCC Asbestos Testing & Abatement

Management & Training Corporation is seeking quotes for a fee-for-service subcontract to provide asbestos testing and abatement services at the Joliet Job Corps Center in Joliet, Illinois. The scope of work includes sampling and laboratory analysis of ceiling tiles in the Administration Academic Building and Welcome Center, as well as testing and potential removal of asbestos-containing material floor tiles in the Gymnasium (approximately 600 square feet) and the Warehouse and Warehouse Storage Area (approximately 3,600 square feet total). All activities must be performed by licensed professionals using accredited laboratories and conducted in strict accordance with federal, State of Illinois, OSHA, and EPA regulations. This opportunity is open to small businesses, including certified VOSB, SDVOSB, WOSB, and HUBZone entities. Bidders must submit a completed bid sheet, a supplier packet containing a W-9 and self-certification, proof of insurance, and three references for similar projects by October 21, 2026. Award selection is based on best value. The successful contractor must comply with Service Contract Labor Standards, specifically Wage Determination 2015-5019 Rev 31, and adhere to strict government and Department of Labor guidelines regarding information security, privacy breach notifications, and mandatory training. Final acceptance of work is contingent upon the delivery of all waste manifests, laboratory reports, and a final project completion report.

POSTED

DEADLINE

Trace Organic Analysis Laboratory ServicesThis subcontract for Trace Organic Analysis Laboratory Services supports prime contractors on wastewater projects for the City of Atlanta Department of Watershed Management. The selected provider will perform laboratory testing of wastewater samples to verify compliance with industrial pretreatment program requirements and NPDES permits, adhering strictly to Georgia EPD and EPA standards. The contractor must hold NELAP or a state-equivalent certification to deliver certified data and laboratory analysis reports. This opportunity falls under NAICS code 541380, with a response deadline set for October 30, 2026.

POSTED

DEADLINE

Material Testing and Special InspectionsThis subcontract for East Texas A&M University involves providing third-party testing of construction materials and specialized inspections for prime contractors on university facility projects. The scope of work includes conducting soil compaction, concrete slump and strength, and weld testing, as well as performing special inspections to ensure compliance with applicable building codes. The selected provider must utilize an accredited testing laboratory and non-destructive testing tools to deliver certified material test reports and detailed inspection logs. Qualified contractors are required to hold ICC certifications to perform these specialized services. This opportunity is categorized under NAICS code 541380 and was posted on October 21, 2026, with a response deadline of November 6, 2026.

East Texas A&M University

POSTED

DEADLINE

Third-Party Materials Testing and InspectionThis subcontract for Third-Party Materials Testing and Inspection, issued by the Fulton County Purchasing Department in Georgia, involves providing independent testing and inspection of coatings for prime contractors on water storage projects. The scope of work includes inspecting surface profiles after blasting, measuring dry film thickness, conducting adhesion testing, and performing quality assurance inspections using holiday detectors and DFT gauges. Qualified providers must employ NACE/AMPP certified coating inspectors to ensure all standards are met and deliver detailed inspection reports and certifications of compliance. The solicitation was posted on October 21, 2026, with a response deadline of November 18, 2026, falling under NAICS code 541380.

Fulton County Purchasing Department

POSTED

DEADLINE

Environmental Laboratory Analysis and Technical ServicesThe Environmental Laboratory Analysis and Technical Services subcontract supports prime contractors on projects for the Rhode Island Department of Environmental Management. The scope of work involves performing chemical analysis of unknown materials and providing environmental consulting, specifically focusing on organic and inorganic analysis, EPA Method 1311 Zero Headspace Extraction, and comprehensive geological and hydrological assessments. The primary deliverables for this engagement are detailed analytical reports and compliance summaries. To qualify for this contract, service providers must maintain laboratory accreditation for the required EPA methods. Additionally, the contract mandates that personnel performing specialized tasks hold professional licenses in geology, biology, or toxicology. This effort falls under NAICS code 541380 and is managed through the State of Rhode Island.

State of Rhode Island

POSTED

DEADLINE

Construction Inspection and Quality AssuranceThis subcontract for Construction Inspection and Quality Assurance involves performing on-site inspections of construction activities for prime contractors on City of Okeechobee projects. The primary objective is to ensure all work complies with engineering plans and specifications. Responsibilities include attending Technical Review Committee meetings and utilizing specialized field testing equipment and inspection software to monitor progress. Qualified candidates must be certified inspectors, with credentials such as ACI or NICET. Key deliverables for the contract include the submission of daily inspection reports, non-compliance reports, and final inspection sign-offs. The solicitation was posted on October 21, 2026, with a response deadline of November 6, 2026.

POSTED

DEADLINE

Non-Destructive Testing (NDT) and Hydrostatic CertificationThis subcontract, issued by the Department of Defense under the Navsup Weapon Systems Support Mech, involves providing specialized non-destructive testing and hydrostatic certification for critical safety items on Naval Sea Systems Command projects. The scope of work includes performing hydrostatic testing at 150 percent pressure, dye penetrant inspections, and quantitative chemical and mechanical analysis of titanium alloys to ensure structural integrity and safety compliance. Qualified contractors must hold a Confidential security clearance and possess ASNT Level II or III certifications to perform these technical evaluations. The primary deliverables for this engagement are certified test reports and detailed analysis data. Interested parties should note the response deadline of November 20, 2026, for this opportunity categorized under NAICS code 541380.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Specialized Aerospace Testing & CalibrationThis subcontract for Specialized Aerospace Testing and Calibration supports NAVSUP Weapon Systems Support projects by providing final testing and inspection of refueling probes for prime contractors. The scope of work involves conducting rigorous testing in accordance with approved repair and overhaul manuals, utilizing special test equipment and calibrated measurement tools that adhere to ANSI/NCSL Z540 or ISO-10012-1 standards. The selected provider is responsible for delivering comprehensive technical documentation, including detailed test reports, dimensional readings, and RFI certification. This effort falls under NAICS code 541380 and is managed under the Department of Defense.

Navsup Weapon Systems Support

POSTED

DEADLINE

Flight-Critical Module Testing and CertificationThe Flight-Critical Module Testing and Certification subcontract involves performing final testing and inspection of repaired NRP/NSPR Module Assemblies for prime contractors supporting Navsup Weapon Systems Support projects. The selected provider must execute testing procedures according to approved repair and overhaul manuals, utilizing calibrated measuring and test equipment that complies with NCSL Z540.3 or ISO 10012 standards. The primary deliverables for this engagement include detailed test reports and the certification of Ready For Issue status for every unit processed. This Department of Defense requirement falls under NAICS code 541380, with a response deadline set for November 20, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

CSI Material Testing and Ultrasonic Inspection ServicesThe CSI Material Testing and Ultrasonic Inspection Services subcontract involves providing specialized non-destructive testing and laboratory analysis for prime contractors supporting the Department of Defense, specifically the NAVSUP Weapon Systems Support Mech. The scope of work focuses on the ultrasonic inspection of starting materials and the execution of slow strain rate tensile tests for Level I Special Emphasis material in accordance with DI-QCIC-81110 (SE) standards. To fulfill these requirements, the contractor must utilize professional ultrasonic testing equipment and laboratory-grade tensile machinery. Key deliverables for this engagement include the provision of detailed inspection reports, test certifications, and Certificates of Compliance. This opportunity falls under NAICS code 541380 and has a response deadline of November 20, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Non-Destructive Testing (NDT) and SurveyThis subcontract opportunity, managed by the Department of Homeland Security for the US Coast Guard SFLC, involves providing specialized non-destructive testing and survey services for vessel projects. The selected contractor will perform technical inspections, including ultrasonic testing of hull plating freeboard and underwater hull plating and appendages. Key deliverables include the submission of detailed Condition Inspection Reports and comprehensive ultrasonic test results. The project requires the deployment of Certified Non-Destructive Test inspectors to ensure all technical standards are met. This is a total small business set-aside under NAICS code 541380. Interested parties must submit their responses by November 16, 2026.

POSTED

DEADLINE

Non-Destructive Testing (NDT) and Quality CertificationThis subcontract focuses on providing Non-Destructive Testing (NDT) and quality certification services for prime contractors supporting the Department of Defense, specifically within the NAVSUP Weapon Systems Support Mech agency. The scope of work involves executing NDT procedures to ensure material compliance for Special Emphasis Level I safety requirements and conducting quality audits. The selected provider is responsible for preparing detailed records for DCMA and DCAA QAR review and delivering validated inspection records and test reports. To ensure technical accuracy and regulatory adherence, the contract mandates strict compliance with ISO/IEC 17025 and ANSI/NCSL Z540.3 standards. This opportunity falls under NAICS code 541380, with a response deadline set for November 25, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

in about 1 month

General Info

Agency

Department Of Health And Human Services → FDA Office Of Acq Grant Svcs

NAICS

541380 - Testing Laboratories and Services

Place of Performance

Chevy Chase, MD, 20815, USA

Set-Aside

SBA

Documents

75F40124R00024 - Accreditation of CBER Laboratory Quality System

rfp

High

Attachment A: CLIN Pricing - CBER Laboratory Quality System Accreditation

2 pages · specifications

High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

2 updates

PhaseClosed

PostedDec 15

Combined Synopsis

Notice updatedJan 16

Response deadline changed from Jan 15, 2024 to Jan 17, 2024. The notice description changed.

Deadline changedJan 16

Response deadline changed from Jan 17, 2024 to Jan 15, 2024.

Response DeadlineJan 17

Deadline has passed

Submission Closed

01/17/2024, 08:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Health And Human Services → FDA Office Of Acq Grant Svcs

Contacts2 people available

OfficeBeltsville, MD, 20705, USA

Organization / AgencyDepartment Of Health And Human Services → FDA Office Of Acq Grant Svcs

Office AddressBeltsville, MD, 20705, USA

Contacts

Sheila Brown

contact@example.gov

Ian Weiss

contact@example.gov

+1 (555) 000-0000

Full Description

Amendment 01: Question: We are in process of providing a quotation for accreditation services for this contract and have a question. It mentions that there is a possibility of adding up to 30 or so RMPS or tests on the reassessment years. Are you looking for a quotation for that on top of what is currently accredited or is this an informative statement so we are aware modifications of the contract may occur every 2 years because of these requests? Answer: This is an informative statement that additional test methods and/or reference materials may be added to the current scope of standing accredited methods and reference materials. Currently there are 19 Test Methods accredited, and 3 reference materials. I would like to begin by seeking clarification on the type of procurement document in question. Specifically, I am uncertain whether it is categorized as an RFQ or an RFP. Answer: The requirement is a Request for Proposal (RFP). Could you present us with more details on how we should fill this attachment. Are you requesting monthly prices or yearly costs ? Answer: Annual Costs Solicitation number FDA-RFP - 75F40124R00024 is issued as a Request for Proposal (RFP). This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information from FAR Part 13 and included in this notice. The resultant contract will include all applicable provisions and clauses in effect through the Federal Acquisition Circular 2023-03. The North American Industrial Classification System (NAICS) code for this procurement is 541380, Testing Laboratories. The PSC Code will be PSC Q301 Medical'Laboratory Testing. The objective of this contract is to renew accreditation of CBER's pharmaceutical testing and reference material production activities to international standard ISO 17025 - General requirements for the competence of testing and calibration laboratories and ISO 17034 - General requirements for the competence of reference material producers. After accreditation is granted, an alternating schedule of biennial on-site assessments and alternating year document reviews is required. Independently, and not as an agent of the Government, the Contractor shall assess CBER's 17025 and 17034 Quality System and LQS including previously accredited biological, microbiological, and chemical test methods (currently 21) with no additional new test methods being put forward for the base year but CBER reserves the right to expand its scope in the upcoming option years (approximately 10 per year) along with approximately 30 reference materials. These activities are conducted at only one location in Silver Spring, Maryland. No off-site or mobile testing is performed.