This Solicitation opportunity from Government of Canada was posted on June 5, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Acquisition d’une estampeuse incluant les services d’entretien

Closed

20147039International

Submission Closed06/15/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333514

New

Federal

Wafer Broach Holding Bar

Solicitation # W519TC26Q7722

This special notice is for the procurement of Wafer Broach Holding Bars under solicitation number W519TC26Q7722. The action is restricted to BPA Fixture and Tooling Holders and is issued by the Department of Defense through the W6QK Acc-Ri office located in Rock Island, Illinois. The opportunity was posted on August 18, 2026, with a response deadline of August 21, 2026. There is no specific set-aside designated for this contract, and the place of performance is located in Illinois.

POSTED

DEADLINE

Solicitation # FA469026Q0043

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-19FG

The Defense Logistics Agency, under the Department of Defense, has issued solicitation SPE4A6-26-T-19FG for the procurement of two transfer fixtures. The items are identified by NSN/Part Number 2835-01-078-2084 and are associated with purchase request 7017940996. This federal solicitation was posted on August 18, 2026, with a response deadline set for August 26, 2026. Interested parties can find further details and submission guidelines through the DIBBS portal.

Defense Logistics Agency

POSTED

DEADLINE

146312 BENDER, HYDRAULIC

Solicitation # 231486

The City of Los Angeles has issued solicitation number 231486 for the procurement of a hydraulic bender. This local government opportunity is managed by the City of Los Angeles and is intended for performance within Los Angeles, California. Interested vendors must submit their responses by August 28, 2026, at 5:00 PM. Primary inquiries regarding the bid can be directed to Eric P. Lau via email. Potential participants may be required to register on the official City of Los Angeles website to complete the bidding process.

POSTED

DEADLINE

Special Tooling for Casting or ForgingThe Department of Defense, through the ASC Commodities Division, is seeking a subcontractor for the design and fabrication of special tooling, including dies, molds, and jigs. This tooling is essential for the casting or forging of sleeve bushing blanks, as the government currently lacks the necessary equipment to perform these operations. The project is categorized under NAICS code 333514 and will be performed at Tinker AFB. Interested parties must submit their responses by August 24, 2026, following the posting date of August 16, 2026.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Tooling and Mold FabricationThis subcontract, titled Precision Tooling and Mold Fabrication, is issued by the Department of Defense under the Land Supply Chain agency. The primary objective of the contract is the design and fabrication of custom tooling, molds, or dies specifically required for the metal casting of retaining straps. The solicitation was posted on August 16, 2026, with a response deadline of August 27, 2026. This project falls under NAICS code 333514, focusing on the specialized manufacturing of industrial molds and dies.

POSTED

DEADLINE

Laboratory Scale Electrode Calendaring System

Solicitation # 26-58096

The National Research Council Canada is seeking proposals for a laboratory scale electrode calendaring system under solicitation number 26-58096. This open tendering process is available to Canadian suppliers and requires all deliverables to be received in Mississauga, Ontario, by December 15, 2026. The contract will be awarded to the responsive bidder who satisfies all mandatory technical criteria and provides the lowest price. Interested parties must submit their tenders to the NRC Bid Receiving Unit by the closing deadline of September 10, 2026. All official documentation, amendments, and inquiries are managed through the Government Electronic Tendering Service. The procurement process is overseen by Senior Procurement Officer Helen Tran and adheres to the integrity regime administered by Public Services and Procurement Canada.

National Research Council of Canada

POSTED

DEADLINE

Tooling Design and Fabrication for CastingThis subcontract opportunity with the Department of Defense involves the design and fabrication of molds, patterns, and dies necessary for the metal casting of a loader housing. This specific requirement is a distinct supplier opportunity focused on the tooling phase and is separate from the actual casting production. The project is managed by the Construction and Equipment Manufacturing and Construction agency and will be performed at Nellis AFB. Interested parties must submit their responses by August 24, 2026, under NAICS code 333514.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Purchase Swage Tooling

Solicitation # 101-26

Lincoln Electric System is soliciting formal bids under solicitation number 101-26 for the purchase and delivery of a complete swage tooling system. The required equipment includes a battery-powered hydraulic pump compatible with Milwaukee M18 batteries, a 10-foot hydraulic hose with swivel and quick-disconnect fittings, head assemblies with removable dies for specific connectors, an inspection gauge, and carrying cases for all components. The tooling must be capable of performing uniform 360-degree compressions and must meet or exceed national standards including ANSI, NEMA, IEEE, and ASTM. The procurement is managed by the LES Procurement Department, with a bid due date of August 27, 2026, at 2:00 PM CT. All submissions must be uploaded as a single PDF or ZIP file via the LES Online Procurement System. Delivery is required FOB Lincoln, Nebraska, to the LES Operations Center. Payment terms are set at Net30. All inquiries must be submitted through the clarifications tab of the bid portal. Final acceptance of the equipment is contingent upon successful testing and verification of compliance with LES specifications at the destination.

Lincoln Electric System

POSTED

DEADLINE

Notice of Intent to Sole Source - Chaff and Flares Inserts

Solicitation # FA441826Q0084

The 437th Maintenance Squadron at Joint Base Graham, South Carolina, intends to award a sole source purchase order to Fourshare LLC for 270 M548 Chaff and Flare Inserts. These specific components, identified by part number XP202303016-01, must be manufactured using Avient Stat-Tech AS-1000 AS Black polymer to ensure compliance with strict electrostatic discharge safety thresholds and flight configurations. The procurement is being conducted under the Acquisition of Commercial Products and Commercial Services and Other Than Full and Open Competition regulations. The anticipated award date for this contract is August 31, 2026. While this is not a request for competitive proposals, the government is inviting interested parties to submit written information regarding their ability to meet these requirements by August 27, 2026, at 2:00 PM Eastern Daylight Time. The final decision to proceed with a sole source award or move to competitive procurement remains at the sole discretion of the government.

POSTED

DEADLINE

The Drive Plate Bushing Gage - H-1 United States Marine Corps (USMC) Helicopter Program

Solicitation # N68335-26-Q-1139

The U.S. Navy’s Naval Air Warfare Center, Aircraft Division, based at Joint Base MDL in New Jersey, is preparing to issue a Firm Fixed Price contract for the Drive Plate Bushing Gage, Part Number 18D13071-1, to support the United States Marine Corps’ Domestic H-1 Helicopter Program. This procurement will be conducted as a Total Small Business Set-Aside under the SBA and NAICS code 333514, ensuring eligibility is restricted to small businesses as defined by the Small Business Administration. The solicitation number is N68335-26-Q-1139, with documents available exclusively through the SAM.gov website; no requests via phone or mail will be honored. The presolicitation was posted on June 10, 2026, and responses must be submitted by June 25, 2026, at 5:00 PM Eastern Time. Vendors are required to monitor the SAM website periodically for any amendments to the solicitation, as updates will only be posted there. The government has explicitly stated this document is not a request for proposal and does not obligate it to pay for any information received from potential vendors. It serves solely as an administrative notice to indicate possible future procurement activity and should not be interpreted as a commitment to award a contract. The contract, if awarded, will be performed at Lakehurst, New Jersey, and inquiries should be directed to Chris Brake at christopher.d.brake5.civ@us.navy.mil. All participation is voluntary, and the Government reserves the right to modify, delay, or cancel the procurement at any time without liability or obligation.

Navair Warfare Ctr Aircraft Division

POSTED

DEADLINE

Precision Mold Tooling SupplyThe contract awards the design and supply of precision mold tooling specifically for the production of a drain assembly fan component, under the NAICS code 333514 for Die and Die Tooling Manufacturing. This subcontract is issued by the Defense Logistics Agency within the Department of Defense and is intended to support defense-related manufacturing needs. The solicitation was posted on July 21, 2026, and the precise location for performance has not been specified, indicating flexibility in where the molds will be fabricated or delivered. The contract does not have a set-aside designation, meaning it is open to all qualified businesses regardless of size or status. The awarded entity is responsible for delivering molds that meet exacting precision standards to ensure consistent, high-quality output of the component. All work must align with the technical and quality requirements dictated by the defense supply chain, with performance tied to the specified contract reference number SPE4A726V1839.

Defense Logistics Agency

POSTED

about 1 month ago

DEADLINE

N/A

AI Contract Overview

The Société de l’assurance automobile du Québec is seeking bids for the purchase of an aluminum plate stamping machine along with preventive maintenance and technical support services under solicitation number 20147039. This procurement is open to small businesses based in Quebec and elsewhere in Canada, with the contract duration set at three years and delivery required at the organization’s head office. All documentation must be accessed through the Government’s Electronic Tendering System, and submissions may be submitted either electronically via the same system or by paper, though electronic submissions are mandatory through the designated platform. The issuance date is May 20, 2026, with responses due by June 8, 2026, and the primary point of contact is Contracting Authority Alexandre Carrier, reachable by phone or email. The NAICS code associated with this solicitation is 333514, and while the agency is listed as the Government of Canada, it is managed by the Société de l’assurance automobile du Québec. The organization reserves the right to reject all bids without obligation, regardless of price or terms.

General Info

Quebec government seeks bids for aluminum stamping machine, maintenance, three-year contract, deadline June 8, 2026.

Agency

Government of Canada → Société de l'assurance automobile du Québec .View Agency

NAICS

333514 - Special Die and Tool, Die Set, Jig, and Fixture ManufacturingView NAICS

Place of Performance

Capitale-Nationale (Québec), CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedJun 5

Solicitation

Response DeadlineJun 15

Deadline has passed

Submission Closed

06/15/2026, 09:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Société de l'assurance automobile du Québec .

Contacts1 person available

OfficeN/A

Organization / Agency

Government of Canada → Société de l'assurance automobile du Québec .

View Agency Profile

Office AddressN/A

Contacts

Carrier AlexandreContracting Authority

contact@example.gov

+1 (555) 000-0000

Full Description

SOCIÉTÉ DE L’ASSURANCE AUTOMOBILE DU QUÉBEC AVIS D’APPEL D'OFFRES CRW101598-1 DESCRIPTION Le présent appel d’offres public est réservé aux petites entreprises du Québec et à celles d’ailleurs au Canada. La Société de l'assurance automobile du Québec sollicite des soumissions pour l’acquisition de biens dans le cadre du contrat pour l’acquisition d’une estampeuse incluant les services d’entretien. Le contrat découlant du présent appel d’offres vise à acquérir une nouvelle estampeuse à plaquettes d’aluminium incluant le service d’entretien préventif et l’assistance technique. Les biens doivent être livrés au siège social de la Société et la durée prévue du contrat est de trois (3) ans. DISPONIBILITÉ DES DOCUMENTS D'APPEL D'OFFRES Les documents seront uniquement disponibles via le système électronique d’appels d’offres (SEAO). Le coût des documents est déterminé par SEAO. SOUMISSION ÉLECTRONIQUE Dans le cadre du présent appel d’offres, les soumissions peuvent être transmises par support papier ou par voie électronique. Les soumissions électroniques ne peuvent être déposées que par l’intermédiaire du système électronique d’appel d’offres du gouvernement (SEAO). RÉSERVE La Société de l'assurance automobile du Québec ne s'engage à accepter ni la plus basse ni aucune des offres reçues.