Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

ACTUATOR, ELECTROMECHAN

Open
SPE7MC-27-T-2091Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE7MC-27-T-2091 is a small business set-aside procurement issued by the DLA Weapons Support Maritime Hardware/Electrical for one electromechanical rotary actuator, NSN 4810-01-585-2146. The requirement specifies a need ship date of May 4, 2027, with an original required delivery date of November 6, 2027. Delivery is managed under the First Destination Transportation program with FOB Origin terms, and the final destination is DLA Distribution Jacksonville, Florida. Inspection and acceptance are conducted at the destination in accordance with FAR 52.246-2. The contractor must adhere to strict packaging and marking standards, including MIL-STD-129 and DLA packaging requirements RP001. Specific preservation mandates require all bare metal to be protected against corrosion and all moving parts to be properly lubricated. The contract incorporates several critical regulatory requirements, including CMMC Level 2 self-assessment, Buy American and Balance of Payments program restrictions, and safeguarding of covered defense information. Payment processing must be handled electronically via the Wide Area WorkFlow system.

General Info

Small business procurement for one electromechanical rotary actuator delivered to Jacksonville, Florida.

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing

Place of Performance

BLDG 175 SWAN ROAD, JACKSONVILLE, FL, 32212-0103, USA

Set-Aside

NONE

Documents

1
PDF, High priority: read this firstrfq
High

Read the document

Due in 12 days

Every page of every file, in your free workspace.

Read the document

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

View Full Breakdown
Due in 12 days

Everything you need to bid on this one

Open the full contract in your free workspace.

  • 1 solicitation documentRead every page
  • AI contract breakdown13 sections, Uniform Contract Format
  • Buyer contactEmail and phone
Open the full contract

Ask CLEATUS

I've read this contract. Ask me anything.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → JACKSONVILLE BLDG
Contacts1 person available
OfficeUSA

Full Description

Show more
ACTUATOR,ELECTROMECHANICAL,ROTARY
ACTUATOR,ELECTRO-ME
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
CURTISS-WRIGHT FLOW CONTROL CORPORATION 63600 P/N 6612/2-S688-100
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7019023801 0001 EA 1.000
NSN/MATERIAL:4810015852146
DELIVERY (IN DAYS):0157
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:50 CLNG/DRY:1 PRESV MAT:ZZ
SPE7MC-27-T-2091
SECTION B
PR: 7019023801 PRLI: 0001 CONT’D
WRAP MAT:GC CUSH/DUNN MAT:AD CUSH/DUNN THKNESS:C
UNIT CONT:F2 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PRESERVATIVE MATERIAL: ZZ USE PRESERVATION MATERIAL ONLY IF IT WILL NOT DAMAGE, DEGRAGRATE, OR DETERIORATE PART AS FOLLOWS ALL BARE METAL SHALL BE PROPERLY PRESERVED TO PREVENT CORROSION. ALL MOVING PARTS SHALL BE PROPERLY LUBRICATED. EACH ITEM SHALL BE INDIVIDUALLY PACKAGED AS CONTRACTUALLY SPECIFIED.
PACKAGE DESIGN MUST IMMOBILIZE ITEM WITHIN CONTAINER TO ADEQUATELY PACKAGE AND PROTECT ITEM. UNIT CONTAINER SELECTION MUST ADEQUATELY CONTAIN AND PROTECT MATERIAL. .
ZZ SPECIAL MARKING REQUIREMENTS: 03 METHOD 50; OPEN THIS SIDE; 24 OPEN FOR INSPECTION OR USE ONLY
PARCEL POST ADDRESS:
SW3122
DLA DISTRIBUTION JACKSONVILLE
BLDG 175 SWAN ROAD
JACKSONVILLE FL 32212-0103
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3122
DLA DISTRIBUTION JACKSONVILLE
BLDG 175 SWAN ROAD
RAYMOND MORGAN Sign up to see this detail
JACKSONVILLE FL 32212-0103
US
Need Ship Date:05/04/2027 Original Required Delivery Date:11/06/2027
SPE7MC-27-T-2091 NSN/Part Number: 4810-01-585-2146 Quantity: 1 EA Purchase Request: 7019023801QTY: 1 Delivery: 157 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
Federal
16--PRIME PUMP, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QFB84
This sole source procurement, issued by NAVSUP Weapon Systems Support, is for the overhaul, repair, and testing of Prime Pumps (P/N 06307-02807-101, NSN 1650-016671641) to return them to a Ready for Issue condition. The contractor, identified as Sikorsky Aircraft Corp, is responsible for providing all labor, materials, and tooling, as the government will not provide manufacturing aids or test equipment. Key technical requirements include the mandatory use of SAE-AS22759 series wire instead of MIL-W-81381 and compliance with IPC/EIAJ-STD-001C for personnel performing specific tasks. All parts and materials must be new per FAR 52.211-5, and the contractor must maintain a quality system conforming to ISO 9001/SAE AS9100 and a calibration system meeting ANSI/NCSL Z540.3 or ISO-10012-1. The contract specifies a total quantity of five units and requires Government Source Approval prior to award. Payment will be processed electronically via the Wide Area WorkFlow system. Packaging must adhere to MIL-STD-2073 and MIL-P-16789, with a requirement for a proper enclosed warehouse environment for storage. The scope of work includes detailed provisions for Beyond Economical Repair (BER) determinations, Missing on Induction (MOI) assets, and Over and Above Repair (OAR) efforts, all of which require DCMA concurrence and PCO approval. Inspection will be conducted using the contractor's equipment, and the procurement is intended to be awarded under the terms and conditions of BOA N00383-26-G-P401.
Navsup Weapon Systems Support

POSTED

about 4 hours ago

DEADLINE

in about 5 hours
View Details
NAICS: 336413
New
Federal
16--CONTROL PANEL,AIRCR, IN REPAIR/MODIFICATION OF
Solicitation # N0038327QFA18
Solicitation N00383-27-Q-FA18 is a request for quotation for the teardown, evaluation, repair, and modification of one aircraft control panel, identified by National Stock Number 1680-01-693-4654. The requirement is issued by Navsup Weapon Systems Support under Emergency Acquisition Flexibilities and intends to be awarded within the terms and conditions of BOA N00383-26-G-P401. Due to a lack of sufficient technical data, the government requires Government Source Approval prior to award; any offeror not already approved must submit the necessary documentation from the NAVSUP WSS Source Approval Brochure with their proposal. This requirement is not a small business set-aside. The contract specifies an initial induction period of 365 calendar days from the date of award, with a government option to extend this period by an additional 730 days. Delivery is required within 90 days, and the contractor must provide option pricing for a maximum of one unit over the entire contract period. All packaging must comply with MIL-STD-2073, and shipments to water ports or air terminals must adhere to FAR 52.247-52 clearance requirements. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. Inspection and acceptance will occur at the origin, with delivery terms set as FOB Destination.
Navsup Weapon Systems Support

POSTED

about 4 hours ago

DEADLINE

in 3 days
View Details
NAICS: 336413
New
Federal
16--ACTUATOR,PITCH LOCK, IN REPAIR/MODIFICATION OF
Solicitation # N0038327QFA16
This solicitation is for the repair and overhaul of six units of Pitch Lock Actuators (NSN 7R 1650 016672399 H5) to return them to a Ready For Issue condition. The requirement is issued by NAVSUP Weapon Systems Support and is intended to be awarded under the terms and conditions of BOA N00383-26-G-P401. The contractor is responsible for providing all labor, materials, and tooling, as the government will not provide manufacturing aids or test equipment. The induction period is 365 calendar days from award, with a government option to extend this for an additional year. Contractors must propose pricing for a maximum of 10 units over the contract period, providing separate pricing for the second year if costs change. Technical compliance requires adherence to ISO 9001/SAE AS9100 quality systems and calibration standards meeting ANSI/NCSL Z540.3 or ISO-10012-1. The use of MIL-W-81381 wire is strictly prohibited, and SAE-AS22759 series wire must be used instead. A critical requirement for award is Government Source Approval; offerors who are not approved sources must submit the necessary documentation from the NAVSUP WSS Source Approval Brochure with their proposal. The contract includes a 365-day warranty for noncomplex supplies and requires the use of the Wide Area WorkFlow system for invoicing and payment. Packaging must comply with MIL-STD-2073, and the contractor must maintain a proper enclosed warehouse environment for all assets.
Navsup Weapon Systems Support

POSTED

about 4 hours ago

DEADLINE

in 3 days
View Details
NAICS: 336413
New
Federal
16--PANEL,INDICATOR, IN REPAIR/MODIFICATION OF
Solicitation # N0038327QFA13
This solicitation is for the repair, overhaul, and modification of four units of the Indicator Panel (NSN 7RH 1680 016958087 H5) to return them to a Ready For Issue condition. The work includes inspection, component repair or replacement, and testing, with the contractor providing all necessary labor, facilities, and tooling. The government intends to award this under the terms and conditions of BOA N00383-26-G-P401. A critical requirement for award is Government Source Approval; offerors who are not already approved must submit the required data from the NAVSUP WSS Source Approval Brochure. The contract includes an initial induction period of 365 days, which the government may extend by an additional year. Contractors must provide option pricing for up to 10 units over the contract period, with separate pricing for the second year if costs change. Technical requirements mandate that all parts and materials be new per FAR 52.211-5, and the use of MIL-W-81381 wire is strictly prohibited in favor of SAE-AS22759 series wire. Items are deemed Beyond Economical Repair if costs exceed 75% of the production replacement price, requiring written concurrence from DCMA. The contractor must maintain a quality system conforming to ISO 9001/SAE AS9100 and a calibration system meeting ANSI/NCSL Z540.3 or ISO-10012-1. Payment will be processed via the Wide Area Workflow system using specific DoDAAC routing for payment, administration, and inspection. Delivery is set for 90 days FOB Destination, with inspection and acceptance occurring at the origin.
Navsup Weapon Systems Support

POSTED

about 4 hours ago

DEADLINE

in 3 days
View Details

More opportunities from Department Of Defense → JACKSONVILLE BLDG

Same awarding agency

NAICS: 333413
New
DIBBS
FILTER COMBUST SEPA
Solicitation # SPE8E8-27-T-0615
Solicitation SPE8E8-27-T-0615 is a Request for Quotations issued by DLA Troop Support Construction and Equipment for the procurement of 25 combustion separator filters, identified by NSN 4130-01-554-3029. The requirement specifies parts from Parker-Hannifin Corp, specifically part numbers HV1500/003586F and L1689-02-202. Quotes must be submitted via the DLA Internet Bid Board System by November 23, 2026. Delivery is required within 86 days after receipt of order, with a need ship date of February 18, 2027, and a final required delivery date of April 12, 2027. The shipping terms are FOB Origin, with the destination for inspection and acceptance being DLA Distribution Jacksonville in Florida. The contract mandates strict adherence to packaging and marking standards, requiring compliance with ASTM D3951, MIL-STD-129, and DLA packaging requirement RP001. Technical and quality requirements are governed by the DLA Master List under RA001. Key regulatory clauses include the Buy American and Balance of Payments Program, safeguarding of covered defense information per DFARS 252.204-7012, and the use of the Wide Area WorkFlow system for all invoicing and payment requests. Offerors are encouraged to provide quantity ranges due to volatile demand and must disclose any use of non-domestic materials.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

5 days ago

DEADLINE

in 7 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS