Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

ADAPTER, CONNECTOR

Active
SPE7M5-26-T-357JFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of an adapter connector under solicitation SPE7M5-26-T-357J, with a requirement for two units to be delivered within twenty days FOB destination. The item is identified as a commercial off-the-shelf product with NSN 5935010929429 and is subject to strict packaging and marking standards per MIL-STD-2073-1E and MIL-STD-129, with no special marking required. The delivery address is a U.S. Navy vessel shipment to USS DECATUR DDG 73, and transportation logistics must follow DLAD procedures C19 and C20. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware except in limited, approved applications such as batteries, fluorescent lights, and specified instrument controls, with additional containment requirements for portable devices. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels of VII, IV, and II for critical, major, and minor qualities respectively. The supplier must comply with DLA packaging and quality requirements as referenced from the DLA Master List, and the contract enforces a zero variance tolerance on quantity. The point of contact for inquiries is Margaret Smith, and the item is classified under NAICS code 334220.

General Info

Procure two COTS adapter connectors, NSN 5935010929429, deliver FOB destination to USS DECATUR DDG 73 in 20 days, zero non-conformances, no mercury except approved uses.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

334220 - Radio and Television Broadcasting and Wireless Communications Equipment ManufacturingView NAICS

Place of Performance

UNIT 100185 BOX 1, FPO, AP, 96663-1290, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ACTIVE DEVICES DIVISION
View Agency Profile
Office AddressUS
Contacts
Margaret Smith
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
ADAPTER,CONNECTOR
ADAPTER,CONNECTOR
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
THIS IS A COMMERCIAL OFF-THE-SHELF ITEM.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
TYCO ELECTRONICS CORP 26805 P/N 3280-2224-00
DAL-TECH DEVICES, INC. 52335 P/N BF-XSMBM
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE7M5-26-T-357J
SECTION B
PR: 7017659227 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017659227 0001 EA 2.000
NSN/MATERIAL:5935010929429
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:D3 OPI:O
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
R21947
USS DECATUR DDG 73
UNIT 100185 BOX 1
FPO AP 96663-1290
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
R21947
USS DECATUR DDG 73
DLA VENDORS: USE VSM FOR
US
RDD 777 SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
M/F: (TCN) R219476202CE62
RDD: 777
PROJ: EP5 TP 2
SUPP ADD: YNCSE1 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 04
SPE7M5-26-T-357J
SECTION B
PR: 7017659227 PRLI: 0001 CONT’D
DIC: A41 DIST: 9B ADV: FC: NR
Need Ship Date:00/00/0000 Original Required Delivery Date:07/27/2026
SPE7M5-26-T-357J NSN/Part Number: 5935-01-092-9429 Quantity: 2 EA Purchase Request: 7017659227QTY: 2 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334220
New
DIBBS
ANTENNA
Solicitation # SPE7M5-26-T-357P
The contract is for the procurement of eight antennas with NSN/part number 5985-99-671-2175 under solicitation SPE7M5-26-T-357P, issued by the Department of Defense’s Active Devices Division. The requirement is governed by DLA packaging and technical quality specifications referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions. Deliverables must be shipped within 225 days after contract award, and the place of performance is designated as New Cumberland, Pennsylvania, with zip code 17070-5002. The offeror must submit a complete data package covering both the approved part and any alternate part, and the government’s identification must be removed from non-accepted supplies. The solicitation was posted on July 29, 2026, with responses due by August 10, 2026, and the North American Industry Classification System code is 334220. Primary points of contact include Matthew Stanko, reachable via email fmtewiq@dla.mil or phone 3128507245, with additional details accessible through the DIBBS portal linked in the contract data.
ACTIVE DEVICES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334220
New
DIBBS
PARTS KIT, ELECTRONI
Solicitation # SPE4A5-26-T-312T
This contract pertains to a Parts Kit, Electronic with NSN 5895-01-587-8342, requiring the delivery of 162 kits under solicitation SPE4A5-26-T-312T. The kits must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. The kit must be assembled and packaged per MIL-STD-2073-1E Appendix D, with all components contained in a single box sufficient to prevent damage, properly cushioned to inhibit movement, and labeled with a detailed contents list including part numbers, NSNs, and quantities per kit. Marking and barcoding must conform to MIL-STD-129, and palletization must meet DLA packaging requirements. No unique item identification is required per customer direction, and sampling follows MIL-STD-1916 or equivalent zero-based plans with acceptance criteria of zero non-conformances unless otherwise specified in the contract. Delivery is mandated FOB origin within 95 days, with inspection and acceptance occurring at destination, and no variance in quantity is permitted. The preservation method is specified as preservative type 10 with dry packaging, using the materials and methods prescribed in the contract, and all packaging must be labeled with the code U without special marking. The delivery address is DLA Distribution Red River in Texarkana, TX, with a required ship date of November 10, 2026, and an original required delivery date of March 3, 2028. The item is classified as a Critical Application Item by The Boeing Company, and cybersecurity compliance requires a CMMC Level 2 self-assessment. Documentation for source approval, configuration change management, and removal of government identification from non-accepted items are mandated, with all supply chain activities subject to defense information protection and transportation guidelines as outlined in DLA procedural notes.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334220
New
DIBBS
AMPLIFIER, RADIO FRE
Solicitation # SPE7M5-26-T-358F
The contract is for the procurement of four Radio Frequency Amplifiers with part number SXA3929 and NSN 5996-01-464-6320 under solicitation SPE7M5-26-T-358F, issued by the Department of Defense’s Active Devices Division as a Total Small Business Set-Aside. Delivery is required within 161 days to Tinker AFB, Oklahoma, with FOB Origin terms and a mandatory delivery date of July 27, 2027. The item must fully comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, and the technical data cited in the solicitation—though incomplete—must still be met. The product is designated as ESD-sensitive, requiring DOD-qualified packaging per MIL-PRF-81705, including Type I and Type III barrier materials for electrostatic discharge and electromagnetic interference protection. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 marking standards, with special labeling code 39 indicating ESD sensitivity, and must include adequate cushioning to prevent lead damage. The supplier must verify all ESD/EMI packaging materials originate from QPL-81705 qualified manufacturers and use approved protective workstations during handling. Compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment is required, and configuration changes must be managed through formal engineering change proposals or variance requests. Removal of government identification from non-accepted supplies is prohibited. The unit of issue is each (EA), with no quantity variance allowed, and inspection and acceptance occur at destination. A required ship date of January 19, 2027, precedes the delivery deadline, and transportation must follow DLA Procurement Notes C19 and C20.
ACTIVE DEVICES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334220
New
DIBBS
RF Power Divider Manufacturing and SupplyThe contract involves the manufacture and supply of a Radio Frequency Power Divider identified by National Stock Number 5985-01-447-7780, designed to meet exacting military specifications covering all phases from initial design through final production, testing, and quality assurance. This is a subcontract opportunity under a Total Small Business Set-Aside, restricted exclusively to small businesses as defined by the Small Business Administration, with the North American Industry Classification System code 334220 indicating specialization in communication equipment manufacturing. All work must be performed at the designated place of performance in Chambersburg, Pennsylvania, with a zip code of 17201-4150, ensuring that the product complies with U.S. Department of Defense standards for performance, reliability, and durability under operational conditions. The solicitation was posted on July 28, 2026, with a strict response deadline of July 31, 2026, indicating a short turnaround for proposals from qualified small business contractors. The contracting activity is managed by the Active Devices Division within the Department of Defense, which requires adherence to rigorous technical and quality control protocols throughout the manufacturing lifecycle. Proposers must demonstrate capability in producing defense-grade RF components, with an emphasis on consistency, traceability, and compliance with applicable military standards. Delivery of the power divider must satisfy both functional requirements and documentation expectations to ensure integration into broader military systems without compromise.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 334220
New
DIBBS
Supplier of Covered Defense Telecommunications EquipmentThe contract requires the supplier to provide covered defense telecommunications equipment in compliance with FAR 252.204-7016, mandating full adherence to security and compliance standards for any embedded telemetry, tracking, or communication components within the packaging or devices. This includes ensuring no unauthorized data transmission, hardware vulnerabilities, or non-compliant third-party components are integrated, with strict accountability for supply chain integrity and cybersecurity posture. The equipment must be sourced and manufactured in alignment with federal directives to mitigate risks associated with counterfeit or compromised telecommunications infrastructure. This is a subcontract under the Department of Defense, specifically managed by the Medical Supply Chain MD Surg FSF, with performance taking place in Kings Bay, Georgia, at ZIP code 31547-2605. The solicitation falls under NAICS code 334220, which classifies the industry as Communications Equipment Manufacturing. The response deadline is August 3, 2026, and all submissions must meet the stringent compliance requirements for defense telecommunications equipment to ensure adherence to national security standards and supply chain resilience mandates.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 334220
New
DIBBS
Supply of Telephone Shells and Vehicle CradlesThe contract seeks the manufacture and delivery of 13,000 commercial off-the-shelf telephone shells and vehicle cradles that must meet strict form, fit, and function specifications to ensure compatibility and reliability in operational environments. The requirement is structured as a subcontract under the North American Industry Classification System code 334220, indicating a focus on telecommunications equipment manufacturing. All deliverables are expected to be sourced from existing commercial products without custom engineering, emphasizing cost efficiency and proven design while adhering to military-grade performance standards. The place of performance is designated as Texarkana, Texas, with a zip code of 75507-5000, suggesting the products may be destined for or assembled at a defense-related facility in that region. The solicitation was posted on July 28, 2026, with responses due by August 10, 2026, indicating a two-week window for contractors to submit proposals. The contract is administered by the Department of Defense through the Construction & Equipment T & IFO EQ office, reflecting a procurement need tied to military communications infrastructure. Although no set-aside provisions or specific organizational types are identified, the procurement is accessible to all qualified commercial suppliers who can meet the technical and delivery requirements. Interested parties must navigate the DIBBS system via the provided link to access full solicitation details and submit responses directly through the official platform.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 334220
New
DIBBS
MAST SECTION Component Manufacturing and AssemblyThe contract requires the manufacture and delivery of two MAST SECTION units identified by NSN 5985-01-593-0776, fully compliant with Defense Logistics Agency specifications covering all aspects of production, including stringent quality control standards, proper packaging, and precise marking requirements. Delivery must be completed under FOB Origin terms, with the product shipped from the designated production site, and the entire process must be finalized within a strict 147-day timeframe from contract award. The work is classified as a subcontract under NAICS code 334220, reflecting electronic component manufacturing, and performance is expected to occur at a facility in Tracy, California, with a zip code of 95304-5000. The solicitation was posted on July 28, 2026, and responses are due by August 10, 2026, with the contracting activity under the Department of Defense’s ACTIVE DEVICES DIVISION.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 334220
New
DIBBS
Antenna Supply and DeliveryThe contract involves the procurement, packaging, labeling, and delivery of 55 military-specification antennas designated by NSN 5985-01-588-2486 to the U.S. Coast Guard in Elizabeth City, North Carolina, with a delivery destination zip code of 27909-5001. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, exclusively reserved for small businesses as defined by the SBA, and falls under the NAICS code 334220, which corresponds to the manufacturing of navigational, measuring, electromedical, and control instruments. The request for quotation was posted on July 28, 2026, with a firm response deadline of August 10, 2026, and is managed by the Active Devices Division within the Department of Defense. All work must comply with military specifications for performance, packaging, and labeling, and the successful contractor is expected to ensure timely delivery to the specified location without deviation.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 334220
New
DIBBS
ANTENNA
Solicitation # SPE7M5-26-T-356H
The contract involves the procurement of 55 antennas with NSN 5985-01-588-2486 under solicitation SPE7M5-26-T-356H, issued by the Department of Defense’s Active Devices Division. The requirement is a Total Small Business Set-Aside under NAICS code 334220, restricting eligibility to small businesses as defined by the SBA. Delivery must be completed within 20 days after order placement at the specified performance location in Elizabeth City, North Carolina, with a zip code of 27909-5001. The solicitation was posted on July 28, 2026, and responses are due by August 10, 2026. The contract incorporates all applicable technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the controlling revision determined by the solicitation issue date or any subsequent amendment. Removal of government identification from non-accepted supplies is mandated, and offerors must submit a complete data package covering both the primary and alternate parts. Primary point of contact is Matthew Stanko, reachable via email and phone listed in the contract data.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 334220
New
DIBBS
MAST SECTION
Solicitation # SPE7M5-26-T-356T
The contract pertains to the procurement of two units of NSN 5985-01-593-0776 under solicitation SPE7M5-26-T-356T, with a delivery requirement of 147 days after award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible online, with applicable revisions determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions. Sampling procedures must comply with MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, where critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0; unspecified attributes default to major. Zero non-conformances are required in sampling unless otherwise stated, and MIL-STD-105/ASQ Z1.4 may be used solely to determine lot size. The contractor must remove all government identification from non-accepted supplies. An alternate offeror is required to submit a complete data package for both the primary and alternate part. The solicitation was posted on July 28, 2026, with responses due by August 10, 2026, under NAICS code 334220, sourced by the Department of Defense’s Active Devices Division, and performance is designated to Tracy, CA, 95304-5000.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 334220
New
DIBBS
COVER, ANTENNA SUPPO
Solicitation # SPE4A5-26-T-311D
The contract is for a single unit of a COVER, ANTENNA SUPPO with NSN/Part Number 5985-01-083-5140 under solicitation SPE4A5-26-T-311D, with a response deadline of August 5, 2026, and a required delivery within five days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition type. The item is subject to export control under either ITAR or EAR, and disclosure or transfer of associated technical data to foreign persons, including foreign nationals within the U.S., is strictly regulated and requires prior authorization. Access is limited to DLA contractors with approved US/Canada Joint Certification Program status, completion of mandatory DOD export training, and formal DLA authorization. Physical identification and bare item marking must meet RQ017 requirements, and government identification must be removed from non-accepted supplies per RQ011. Item Unique Identification is not required per theService customer’s request and DFARS 252.211-7003(c)(1)(i). Cybersecurity Maturity Model Certification Level 2 by a certified third-party assessor is mandated. All technical data provided is for reference only and is not considered complete. The place of performance is Tobyhanna, PA 18466-5050, with primary point of contact Jessica Baake at DLA.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 334220
New
DIBBS
DIVIDER, POWER, RADIO FREQUENCY
Solicitation # SPE7M5-26-Q-0778
The contract is for one unit of a Divider, Power, Radio Frequency with NSN 5985-01-447-7780, under solicitation SPE7M5-26-Q-0778, set aside entirely for small businesses. Delivery is required within 123 days after contract award, with performance located in Chambersburg, Pennsylvania. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions in effect on the solicitation issue date controlling for this simplified acquisition. The item is subject to strict configuration change management, requiring formal engineering change proposals and variance requests for any deviations. Confidential technical data supporting this item is classified at the Confidential level and will only be released post-award to contractors with a valid and current Confidential security clearance, through secure channels managed by the Data Distribution Office in Columbus, Ohio. A classified drawing is part of the data package and will be provided only after receipt of a completed DD Form 254. Technical data associated with this item is controlled under ITAR or EAR, prohibiting export or disclosure to foreign persons without prior authorization from the Department of State or Commerce, and DFARS 252.225-7048 applies. Distribution of export-controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and formal DLA approval. Packaging and shipping must comply with DLA packaging requirements and hazardous materials regulations under IP025. Government identification must be removed from non-accepted supplies as per RQ011. The primary point of contact is Rosella Lynn at the Defense Logistics Agency, with responses due by July 31, 2026.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 1 day
View Details

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

NAICS: 334419
New
DIBBS
FILTER, RADIO FREQUE
Solicitation # SPE7M5-26-T-358B
The contract pertains to the procurement of a radio frequency interference filter identified by part number RF13034E and NSN 5915-01-479-5585, with a quantity of four units required. Delivery is mandated within 28 days from the contract award, with shipment originating FOB origin and inspected and accepted at the destination. The item is classified as a critical application item, requiring strict adherence to packaging and marking standards per MIL-STD-2073-1E and MIL-STD-129, with no special marking codes applied. Packaging must conform to specific methods including dry preservation, unit container type A1, and intermediate container type D3 with no cushioning material. The contract explicitly prohibits the intentional use of mercury or mercury compounds in the product or its contact components, except for specific functional applications such as batteries, fluorescent lamps, sensors, weapons systems, or reagents specified by NAVSEA, with portable devices containing mercury requiring shock resistance and secondary containment per NAVSEA 5100-003D. All technical and quality requirements referenced via R and I numbers must be sourced from the DLA Master List of Technical and Quality Requirements, with the applicable revision tied to the solicitation or award date depending on acquisition size. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and the original required delivery date is December 13, 2026, with a need ship date of September 8, 2026. The contract is issued under solicitation SPE7M5-26-T-358B, with a unit price of $4.00 per unit, totaling $16.00, and the point of contact is Samuel Cooper of the Department of Defense’s Active Devices Division.
Other Electronic Component Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334412
New
DIBBS
NRP, POWER RACK INTE
Solicitation # SPE7M5-26-T-358E
This contract specifies the procurement of a Power Rack Assembly identified by NSN 5998-01-615-3636 and part number 508-00574-01 from KATO ENGINEERING INC., with a total quantity of eight units to be delivered FOB origin within 168 days of contract award. The item is subject to stringent technical and quality standards defined by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and must comply with MIL-STD-130 for Item Unique Identification (IUID) as mandated by DFARS 252.211-7003. All units require unique serial numbering on the item itself, intermediate packaging, and shipping container, with corresponding serials documented on the packing list per MIL-STD-129. Packaging must adhere to MIL-STD-2073-1E and DLA Packaging Requirements, including reusable Type VI containers from Appendix C for circuit cards, with ESD and EMI protection as required by MIL-PRF-81705 using qualified barrier materials from QPL-81705 suppliers. The item is classified as ESD sensitive, necessitating cushioning prior to bagging, gentle air removal, heat sealing, and application of ESD handling labels. Special marking code 39 must appear on all containers in accordance with MIL-STD-129 and ASTM D5445, and the packaging design must pass safe delivery validation per MIL-STD-2073-1 and ASTM D4169, Distribution Cycle 18, Assurance Level 3. Prohibited materials include mercury or mercury compounds. Deliveries must reach the designated receiving warehouse in Tracy, CA, with no quantity variance allowed. The contract requires strict compliance with all prescribed packaging, marking, and handling procedures to ensure mission-critical readiness and safe transport.
Bare Printed Circuit Board Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, VARIABLE, N
Solicitation # SPE7M5-26-T-357F
The contract specifies the procurement of one variable resistor with NSN 5905-00-907-9823 and part number 7017659304, governed by military specification MIL-PRF-94/5K Revision K dated 09/26/2022, and incorporates technical and quality requirements from the DLA Master List referenced in RA001. All supplies must comply with DLA packaging standards (RP001), including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with special requirements indicating the use of marking code ZZ and adherence to IPC/JEDEC J-STD-609 for lead finish identification on each unit pack. The item is subject to qualified products or manufacturers lists (QPL/QML) as specified in RQ016, and qualification requirements in procurement note H02 apply. Delivery is required within 20 days FOB origin, with zero variance in quantity, and must be shipped by the fastest traceable means excluding parcel post to the delivery address at Fort Campbell, Kentucky. The unit is to be shipped in bulk using the break point code W80N5C, palletized per DLA requirements, and marked for government use with codes identifying the shipment, project, and contracting office. The required delivery date is July 27, 2026, with a response deadline of August 10, 2026, and this solicitation is for a federal acquisition under NAICS code 334416 with no setaside designation.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 493190
New
DIBBS
Military-Compliant Packaging and Preservation ServicesThe contract requires precise packaging, preservation, and marking of electrical connectors in full compliance with MIL-STD-2073-1E and MIL-STD-129 standards to ensure long-term storage and secure transport under military specifications. All work must meet rigorous military requirements for material compatibility, corrosion protection, labeling, and unit identification to safeguard component integrity throughout extended storage and operational deployment. The services are intended for delivery to a defined performance location in New Cumberland, Pennsylvania, with ZIP code 17070-5002, and must be executed by a qualified subcontractor capable of adhering to Department of Defense standards. The solicitation was posted on July 28, 2026, with a firm response deadline of August 10, 2026, and falls under the NAICS code 493190, which pertains to other support activities for transportation. The contracting activity is managed by the Active Devices Division under the Department of Defense, and bidders must submit proposals through the designated DIBBS portal by the specified deadline to be considered.
Other Warehousing and Storage

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and Labeling ServicesThe contract involves providing hazardous materials compliance and labeling services to ensure all hazard warning labels and Safety Data Sheets meet the requirements of OSHA’s Hazard Communication Standard and relevant federal regulations including FIFRA, FDCA, CPSA, FHSA, and the FAA Act. The work requires meticulous adherence to regulatory standards for the accurate preparation, formatting, and documentation of chemical safety information to support safe handling, storage, and transportation of hazardous materials. The contractor must demonstrate proficiency in interpreting complex regulatory frameworks and translating them into compliant technical documentation. This is a subcontract under the Department of Defense’s Active Devices Division, with performance required at the location in New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation was posted on July 28, 2026, and responses are due by August 10, 2026. The NAICS code 541690 identifies the scope as other scientific and technical consulting services, indicating the nature of the work is specialized and professional. The contract does not specify a set-aside type, and there is no designated point of contact provided in the data, requiring bidders to utilize the official DIBBS portal for further information or submissions.
Other Scientific and Technical Consulting Services

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 335931
New
DIBBS
Electrical Connector Manufacturing and SupplyThe contract calls for the manufacture and supply of 471 electrical connectors identified by the National Stock Number 5935012205510, with strict adherence to MIL-DTL-55330 technical specifications and MIL-STD-2073-1E packaging standards. These connectors are intended for military use and must meet rigorous quality and performance criteria to ensure reliability in demanding operational environments. The production and delivery are governed by a subcontract arrangement under the NAICS code 335931, which pertains to other electrical equipment and component manufacturing. The solicitation was posted on July 28, 2026, with a response deadline of August 10, 2026, and the place of performance is designated as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The contract is administered by the Active Devices Division within the Department of Defense, reflecting its critical role in supporting defense logistics and equipment readiness. All deliverables must be packaged and labeled in full compliance with federal military standards to ensure proper handling, storage, and distribution throughout the supply chain.
Current-Carrying Wiring Device Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 335313
New
DIBBS
High-Reliability Circuit Breaker Supply (NSN 5925010801371, Part MS25361-75)The contract calls for the supply of twelve military-specification circuit breakers, model MS25361-75, engineered to meet the stringent requirements of SAE AS58091 Rev D and zero-defect quality benchmarks essential for high-stakes defense systems. These components carry the National Stock Number 5925010801371 and are destined for critical applications where reliability and durability under extreme conditions are non-negotiable. The solicitation, issued under the NAICS code 335313, is classified as a subcontract and is managed by the Active Devices Division of the Department of Defense, with performance required at Tracy, California, 95304-5000. The opportunity was posted on July 28, 2026, and all responses must be submitted by August 10, 2026, leaving a narrow window for qualified vendors to demonstrate compliance with technical, quality, and delivery parameters mandated for national security infrastructure.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 541611
New
DIBBS
Export Control and ITAR/EAR Compliance SupportThe contract seeks specialized support for ITAR and EAR compliance services tailored to defense contractors, with a focus on achieving JCP certification, delivering export control training, and managing access to technical data under stringent regulatory frameworks. These services are critical for ensuring adherence to U.S. export control laws and maintaining the integrity of defense-related technology transfers. The requirement is structured as a subcontract under the NAICS code 541611, indicating it pertains to management consulting services, and is issued by the Active Devices Division within the Department of Defense. Performance is expected to occur in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and all proposals must be submitted by August 12, 2026, following the public posting on July 28, 2026. The solicitation is open to firms qualified to handle the complexities of defense industry compliance, with no specific set-aside designation outlined, and the offeror must be prepared to meet the rigorous oversight requirements associated with DoD contracting.
Administrative Management and General Management Consulting Services

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 541611
New
DIBBS
CMMC and Cybersecurity Compliance SupportThe contract requires comprehensive cybersecurity compliance support to achieve CMMC Level 2 certification and implement NIST SP 800-171 controls for the handling of covered defense information. The work involves assessing current cybersecurity posture, identifying gaps against CMMC Level 2 requirements, and providing guidance and documentation support to implement the necessary safeguards as outlined in NIST SP 800-171. This includes advising on policies, procedures, technical controls, and system configurations to ensure alignment with federal cybersecurity standards for defense contractors. The subcontract is tied to performance at the location in New Cumberland, Pennsylvania, with a Zip code of 17070-5002, and is classified under NAICS code 541611 for management consulting services. The solicitation was posted on July 28, 2026, with responses due by August 12, 2026, and is issued under the Department of Defense through its Active Devices Division. The contract is structured as a subcontract, indicating it supports a prime contractor's obligations to meet CMMC and NIST compliance mandates for defense-related work. There is no set-aside designation specified, and while no point of contact details are listed, the full opportunity can be accessed via the provided DIBBS link. All activities must ensure the secure handling, storage, and transmission of controlled unclassified information in accordance with DoD cybersecurity requirements.
Administrative Management and General Management Consulting Services

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 493190
New
DIBBS
Defense Packaging and Marking Compliance ServicesThe contract requires comprehensive packaging, labeling, and marking services for defense connector adapters, strictly adhering to MIL-STD specifications under the requirements of the Department of Defense’s Active Devices Division. All work must meet rigorous military standards for durability, traceability, and compliance, ensuring seamless integration into defense logistics and supply chains. Performance is centered at New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the services are classified as a subcontract under NAICS code 493190, indicating specialized warehousing and storage activities tied to defense operations. The solicitation was posted on July 28, 2026, with a firm response deadline of August 12, 2026, leaving a narrow window for qualified vendors to submit proposals. There is no set-aside designation specified, meaning the opportunity is open to all eligible contractors regardless of business size or status. The contract does not include a designated point of contact, and all relevant details and submissions must be managed through the official DIBBS platform at the provided UI link. Compliance with all labeling and marking protocols is mandatory, and failure to meet MIL-STD requirements will result in rejection regardless of other qualifications.
Other Warehousing and Storage

POSTED

1 day ago

DEADLINE

in 14 days
View Details