Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

ADAPTER, STRAIGHT, TUBE

Active
SPE7M2-26-T-5992Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of a straight tube-to-hose adapter made of brass, with a female UNF/NF threaded end sized at 1/2 inch outer diameter tube and 3/4 inch-16 thread, featuring a 45-degree seat, and a swivel male end designed for a 1/2 inch nominal hose size with an overall length of 1-15/16 inches. The product is classified as a critical application item and must strictly comply with technical and quality requirements referenced in the DLA Master List, including calibration standards per ANSI/NCSL Z540-1-1994 or ISO 10012-1. It is prohibited to contain mercury or mercury-containing compounds except under limited exceptions for batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and specific chemical reagents approved by NAVSEA. Portable devices containing mercury must be shock-proof and include a secondary containment. The use of Class I ozone-depleting chemicals is strictly banned. The adapter is sourced from multiple approved suppliers including Eaton Aeroquip LLC, Danfoss Power Solutions II, LLC, and others, each with designated part numbers. The item is identified by NSN 4730-00-542-2807 and is to be delivered in a quantity of 416 units, each priced at $416.00, for a total of $173,056.00. Delivery is due within 21 days of contract award, FOB origin, with inspection and acceptance occurring at destination. Packaging must conform to MIL-STD-2073-1E and marking to MIL-STD-129 with no special marking code. The product must be palletized per DLA packaging requirements and shipped to the specified DLA distribution facility in New Cumberland, Pennsylvania, with the required ship date of September 8, 2026, and original delivery deadline of March 27, 2027.

General Info

Brass 1/2-inch tube-to-hose adapter, 45-degree seat, 416 units, $416 each, FOB origin, delivery by March 27, 2027

Agency

Department Of Defense → NUCLEAR REACTOR PROGRAMView Agency

NAICS

332996 - Fabricated Pipe and Pipe Fitting ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE7M2-26-T-5992.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → NUCLEAR REACTOR PROGRAM
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → NUCLEAR REACTOR PROGRAM
View Agency Profile
Office AddressUS
Contacts
David Larsen
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
ADAPTER,STRAIGHT,TUBE TO HOSE
ADAPTER,STRAIGHT,TUBE TO HOSE...BRASS,1ST END,
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RT001: MEASURING AND TEST EQUIPMENT
THD FEMALE,U/W 1/2 IN.OD TUBE,3/4 IN.16 THD
SIZE,UNF OR NF,CLASS 2,RH,45 DEG SEAT,2ND END,
UNTHD MALE,1/2 IN.NOM HOSE SIZE,W/SWIVEL,
1-15/16 IN.O/A LG.
.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
CONTRACTOR/MANUFACTURER IS REQUIRED TO ESTABLISH
AND MAINTAIN A CALIBRATION SYSTEM THAT MEETS THE
REQUIREMENTS OF ANSI/NCSL Z540-1-1994, AMERICAN
NATIONAL STANDARD FOR CALIBRATION CALIBRATION
LABORATORIES AND MEASURING AND TEST EQUIPMENT
GENERAL REQUIREMENTS, OR ISO 10012-1, QUAILITY
ASSURANCE REQUIREMENTS FOR MEASURING EQUIPMENT
PART 1, METROLOGICAL CONFIRMATION SYSTEM FOR
MEASURING EQUIPMENT.
.
.
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
.
CRITICAL APPLICATION ITEM
TLD ACE CORP 00365 P/N 1008080-0808
SPE7M2-26-T-5992
SECTION B
EATON AEROQUIP LLC 00624 P/N 4797-8
CNH INDUSTRIAL AMERICA LLC 10988 P/N 220-14
KURZ ROOT GENERATOR COMPANY, LLC 75377 P/N 157E37-2223
OSHKOSH DEFENSE LLC 75Q65 P/N 4484JX
DANFOSS POWER SOLUTIONS II, LLC 01276 P/N 10008B408
DANFOSS POWER SOLUTIONS II, LLC 01276 P/N 4797-8B
NORTHROP GRUMMAN SUPPORT SERVICES CORP 48306 P/N 331C195H25
SALINA VORTEX CORP. 62974 P/N 907125
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017685080 0001 EA 416.000
NSN/MATERIAL:4730005422807
DELIVERY (IN DAYS):0021
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:A1 OPI:O
INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
SPE7M2-26-T-5992
SECTION B
PR: 7017685080 PRLI: 0001 CONT’D
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:09/08/2026 Original Required Delivery Date:03/27/2027
SPE7M2-26-T-5992 NSN/Part Number: 4730-00-542-2807 Quantity: 416 EA Purchase Request: 7017685080QTY: 416 Delivery: 21 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332996
New
DIBBS
Metal Buckles and Hardware Supply for Tactical HarnessesThe contract seeks the manufacture and supply of corrosion-resistant, high-strength metal buckles and plated hardware components designed for use in life-support carrying harnesses, with all items required to meet rigorous military specifications. These components are critical to the integrity and reliability of tactical harness systems, demanding precision engineering and materials capable of withstanding extreme environmental and operational stresses. The procurement is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to bid, reinforcing the Department of Defense’s commitment to supporting small business participation in defense supply chains. The solicitation, identified under NAICS code 332996 for Other Fabricated Metal Product Manufacturing, was posted on August 4, 2026, with a response deadline of September 3, 2026. It is managed by the ASC SUPPLIER OPER AE AND AF DIV of the Department of Defense, and performance will occur at an unspecified location. All submissions must align with the technical, quality, and delivery requirements inherent to military-grade life-support equipment, and bidders are expected to demonstrate capable production infrastructure, compliance with defense standards, and a clear pathway to consistent, on-time delivery. Interested parties must access the full solicitation through the provided DIBBS link to understand full technical specifications and submission protocols.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 29 days
View Details
NAICS: 332996
New
DIBBS
CLAMP, REPAIR, PIPE
Solicitation # SPE7M3-26-T-7822
The contract pertains to the procurement of two clamp repair pipe units with a nominal pipe size of 4 inches and a length of 7.5 inches, identified by NSN 4730-01-014-8717 and part number 226-048007-000. The total quantity required is two units, each priced at $2.00, with delivery required within 20 days from the contract award date, FOB origin, and no tolerance for variance in quantity. Inspection and acceptance occur at the destination, and all items must be packaged in compliance with ASTM D3951, though DLA Master List of Technical and Quality Requirements take precedence. Packaging must be marked and labeled per MIL-STD-129, and the unit of issue is each (EA), with packaging quantity per unit pack specified in the contract. The items must be palletized according to DLA packaging requirements and shipped via traceable freight methods, not parcel post. Delivery is directed to Fort Hood, Texas at Building 4925, Santa Fe Avenue, with the designated mark for and shipping address being the same. The shipment must be accompanied by the tracking control number W50YEF62090230 and must arrive no later than July 31, 2026, as per the original required delivery date. The solicitation number is SPE7M3-26-T-7822, issued under the NAICS code 332996 by the DLA Fluid Handling Division under the Department of Defense. All technical and quality specifications referenced by R or I codes are governed by the DLA Master List, with applicable revisions determined by the solicitation or award date. The primary point of contact is William Cain, and the contract is accessible via the DIBBS portal.
FLUID HANDLING DIVISION

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
COUPLING HALF, QUICK
Solicitation # SPE7M0-26-T-028M
The contract pertains to a quick-disconnect coupling half, identified by NSN 4730-01-516-8346, with a quantity of one unit. It is classified as a commercial off-the-shelf item, and adequate catalog data is available to the procurement agency for evaluating alternatives. The item must comply with the DLA Packaging Requirements for Procurement and incorporate technical and quality specifications referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The procurement is subject to the removal of government identification from non-accepted supplies. The solicitation number is SPE7M0-26-T-028M, posted on August 4, 2026, with responses due by August 17, 2026. The NAICS code is 332996, and the contracting agency is the Department of Defense through the Maritime Supply Chain ESOC Buys office, with performance located in Jacksonville, Florida, 32226-3404. Delivery is required within five days after delivery order issuance.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
CAP, TUBE
Solicitation # SPE7M3-26-T-7595
The contract pertains to the procurement of 10 units of CAP, TUBE with NSN 4730013382226 for use on the B-2 aircraft, issued under solicitation SPE7M3-26-T-7595 by the Defense Logistics Agency’s Fluid Handling Division. Delivery is required within 168 days after order placement, with an original delivery deadline of April 5, 2027, and a need ship date of January 19, 2027. The contract specifies FOB origin delivery terms, meaning the contractor bears all transportation costs and risks until goods are loaded at the origin. Inspection and acceptance occur at the destination, specifically at the receiving warehouse in Tracy, California. Packaging must conform to MIL-STD-129 for marking and labeling, with palletization required to meet RP001: DLA Packaging Requirements for Procurement; ASTM D3951 is referenced but explicitly superseded by the more stringent MIL-STD-129 standards. All packaging must include GS1-128 linear barcodes and Data Matrix symbols as required by MIL-STD-129, and hazardous materials must be labeled per OSHA’s Hazard Communication Standard, 29 CFR 1910.1200. Radioactive materials exceeding specified thresholds must also be appropriately marked. The DLA Master List of Technical and Quality Requirements takes precedence over any other referenced standards. The unit of issue is each (EA), with zero variance permitted in quantity. Invoicing must be conducted through the Wide Area WorkFlow system, and payment processing is tied to the DoDAAC for the receiving activity. The contract incorporates standard Federal Acquisition Regulation clauses including those related to small business representation, equal opportunity, combating human trafficking, employment eligibility verification, sustainable products, hazardous material safety data, and NIST SP 800-171 cybersecurity compliance, with multiple deviations authorized under Deviation 2026-00038 and others. Offerors must represent their size status and socioeconomic certifications such as SDB, WOSB, SDVOSB, or HUBZone, and disclose UEI and CAGE codes if applicable. The contract type is implied to be fixed-price based on the use of clause 52.216-1 Alternate I, though the specific pricing is not provided in the available documentation. All proposals must be submitted electronically via the DLA
FLUID HANDLING DIVISION

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332996
New
DIBBS
SLEEVE, CLINCH, TUBE
Solicitation # SPE7L5-26-T-4756
This contract specifies the procurement of a sleeve, clinch, tube fitting intended for aircraft applications, identified by part number MS21922-5 and NSN 4730-00-289-8620, with a total quantity of 968 units. The item is classified as a commercial item and must be manufactured or assembled by an accredited entity listed on the Performance Review Institute’s Qualified Manufacturer List or Qualified Products List, as defined by the PRI QML/QPL standards. It is designated as a critical application item and must comply with SAE AS21922C and SAE AS18280H standards, with strict prohibitions against the use of Class I ozone-depleting chemicals, requiring any substitutes to be pre-approved. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 table 1 with zero non-conformances accepted unless otherwise stated, and attributes are to be verified at specified levels matching AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor characteristics respectively. The contract mandates full compliance with DLA packaging requirements per MIL-STD-2073-1E and marking standards per MIL-STD-129, with no special marking required. Packaging must be palletized according to DLA guidelines and shipped FOB origin with zero variance allowed in quantity. Delivery is required within 83 days, with the need ship date set for May 5, 2026, and the original required delivery date of May 21, 2026. The destination for delivery and inspection is DLA Distribution Jacksonville, Florida, with the freight shipping address and point of contact provided for coordination. The unit price is $968.00 per unit, totaling $936,224.00. Documentation, source approval, and technical compliance are governed by referenced DLA master lists and procurement policies, with the contract solicitation number SPE7L5-26-T-4756 and response deadline of August 17, 2026.
LAND SUPPLIER OPNS ENGINES

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
TEE, TUBE TO BOSS
Solicitation # SPE7M0-26-T-030X
The contract specifies the procurement of a TEE, TUBE TO BOSS with NSN 4730-01-397-1241, quantity of two units, to be delivered within five days of award under solicitation SPE7M0-26-T-030X. Delivery is FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization governed by DLA’s packaging requirements, and all technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements supersede other specifications. The item is sourced from approved suppliers including ADMIRAL VALVE LLC and CIRCOR NAVAL SOLUTIONS LLC, and tooling or casting/forging may be required, necessitating contact with DLA for support if unavailable. Delivery is directed to Pearl Harbor Naval Shipyard with specific shipping and receiving instructions, and the required delivery date is August 5, 2026. The contract is administered by the Department of Defense’s Maritime Supply Chain ESOc, with Grace Beck listed as the primary point of contact.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
ADAPTER, STRAIGHT, FL
Solicitation # SPE7M4-26-T-300J
The contract specifies the procurement of two straight flange adapters with NSN 4730-00-074-9640 and part number 474908, supplied by RTX Corporation under solicitation SPE7M4-26-T-300J. Delivery is required within 320 days from the contract date, with FOB origin terms, and acceptance occurs at the destination. The quantity is fixed at two units with zero variance permitted. All items must comply with DLA’s Master List of Technical and Quality Requirements referenced by R and I numbers, which override any conflicting standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization and labeling instructions explicitly defined. Sampling inspections must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical attributes are subject to stringent verification levels. Configuration changes require formal engineering change proposals, and supplier approval requests must meet RC001 documentation standards. Items must be marked per RQ017 for physical identification, and government identification must be removed from non-accepted supplies per RQ011. The delivery address is DLA Distribution’s New Cumberland facility, and transportation follows DLAD Proc Notes C19 and C20. The contract was posted August 4, 2026, with responses due August 17, 2026.
FLUID HANDLING DIVISION

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
ADAPTER, STRAIGHT, TU
Solicitation # SPE7M4-26-T-300G
This contract specifies the procurement of a straight aluminum alloy adapter with tube-to-boss connections, designed for aircraft applications. The adapter features a male tube end with a 0.250 inch nominal outer diameter and a 7/16 inch-20 UNF Class 3A right-hand thread with a 37-degree seat angle, and a female boss end with a 7/8 inch-14 UNF Class 3B right-hand thread measuring 1.672 inches nominal length. The component is anodized on both internal and external surfaces, has a hex wrenching size of 1.125 inches across flats, and must comply with Class 3 thread specifications. The product is subject to a prohibition on ozone-depleting chemicals, and any substitute materials require prior approval unless explicitly authorized by referenced standards. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance mandatory under TDP Rev A per SAE AS5173E and AS4875/1A. Packaging must adhere to MIL-STD-2073-1E and MIL-B-117 specifications, with marking conforming to MIL-STD-129 and no special marking codes applied. The item is to be delivered FOB origin within 20 days, with zero variance allowed in quantity, inspected and accepted at destination, and shipped by traceable means exclusively—parcel post is prohibited. Six units are required under NSN 4730-00-060-2854 at a unit price of $6.00, totaling $36.00, with delivery directed to a U.S. Department of Defense facility in Columbus, Ohio. The solicitation number is SPE7M4-26-T-300G, issued under full and open competition, with a response deadline of August 17, 2026, and a required delivery date of October 14, 2025.
FLUID HANDLING DIVISION

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
STRAINER ELEMENT, SE
Solicitation # SPE7L5-26-T-4757
The contract specifies the procurement of 29 units of a Strainer Element, SE, identified by NSN 4730-01-146-8368 and part number 3025T90P02, classified as a critical application item under the Department of Defense. Delivery is required within 136 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB origin terms and no variance permitted in quantity. Inspection and acceptance occur at the destination, and all items must be packaged in compliance with ASTM D3951, while strictly adhering to MIL-STD-129 for marking and labeling as mandated by DLA’s Master List of Technical and Quality Requirements, which supersede any conflicting standards. The unit of issue is each, with a total contract value based on a unit price of $29.00, and the packaging must conform to DLA’s RP001 standards including palletization guidelines. The solicitation number is SPE7L5-26-T-4757, with a response deadline of August 17, 2026, and a posted date of August 4, 2026, under NAICS code 332996. The point of contact is Paul Doerfler, reachable via email and phone, and all transportation details must follow DLAD Proc Notes C19 and C20. The delivery schedule requires shipment no later than April 21, 2026, with an original required delivery date of November 1, 2026. All items must be free of government identification if not accepted, and suppliers must reference the DLA Master List for all technical and quality conditions that apply, ensuring full compliance with federal procurement mandates.
LAND SUPPLIER OPNS ENGINES

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
STRAINER ELEMENT, SE
Solicitation # SPE7MC-26-T-166F
The contract is for one sediment strainer element, identified by NSN 4730-01-431-6632 and part number 31423N, to be supplied by LESLIE CONTROLS, INC. Delivery is required within 20 days FOB destination to the USS McFaul DDG74 at FPO AE 09578, with no variance allowed in quantity. The item must comply with DLA packaging requirements based on MIL-STD-2073-1E, including specific packaging methods, materials, and marking in accordance with MIL-STD-129. The strainer element must not contain mercury or mercury-containing compounds unless specifically exempted for functional uses such as batteries, lamps, sensors, or instrument controls, and in those cases, secondary containment and shock-proofing are mandatory per NAVSEA 5100-003D. The contract incorporates technical and quality requirements referenced from the DLA Master List, with revisions controlled by the solicitation issue date. Transportation and shipment logistics follow DLAD procedure notes C19 and C20, and vendor compliance is monitored with government tracking identifiers including DIBBS solicitation number SPE7MC-26-T-166F, project code 9AL TP 2, and a required delivery date of July 31, 2026. Inspection and acceptance occur at the destination, and the point of contact is Nicole Betts of the Defense Logistics Agency.
Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
COUPLING, PIPE
Solicitation # SPE7M1-26-U-4905
This contract is for the procurement of a coupling, pipe with NSN 4730-01-382-1646, under solicitation SPE7M1-26-U-4905, issued by the Department of Defense through the Maritime Supply Chain. The item is classified as a critical application and must be supplied either as Royal Brass Inc part number 106-0066 or Parker-Hannifin Corp part number 222P-8-8. The contract is a total small business set-aside with a procurement quantity of 202 units at a unit price of $1000238685, totaling $202,000, with no variance allowed in quantity. Delivery is required within 57 days FOB origin, with inspection and acceptance occurring at destination. Packaging must comply with MIL-STD-2073-1E and marking per MIL-STD-129, with no special marking required. All packaging and handling must adhere to DLA packaging requirements. Ozone-depleting chemicals are strictly prohibited, and any substitute materials must be pre-approved unless explicitly authorized by specification. The unit of issue is each, and compliance with DLA’s master list of technical and quality requirements is mandatory, with applicable revisions controlled by the solicitation issue date. The point of contact is Bryan Fair, and the solicitation response deadline is August 19, 2026.
MARITIME SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332996
New
DIBBS
ELBOW, TUBE
Solicitation # SPE7M1-26-U-4874
The contract solicitation SPE7M1-26-U-4874 is a total small business set-aside for the procurement of 271 elbow, tube components with NSN 4730-00-133-3196, under a 175-day delivery timeline. All supplies must comply with DLA packaging, technical, and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue or award date depending on acquisition size. Key compliance obligations include adherence to configuration change management, quality conformance inspection, and origin inspection requirements, along with strict prohibitions against intentional use of mercury or mercury-containing compounds except in specific exempted applications such as batteries, fluorescent lights, and weapon systems, which must still meet secondary containment and shockproof standards per NAVSEA 5100-003D. Class I ozone-depleting chemicals are entirely banned, and any substitute chemicals require prior approval unless explicitly authorized by the specification. The supplier must provide one Certificate of Quality Compliance (COQC) for each manufacturing lot, prepared in accordance with the Supplemental Quality Assurance Provision, and make it available for Government review at the time of inspection. Electronic copies of each COQC must be uploaded via the iRAPT system as attachments to the Receiving Report for Government records, and the Government may sign off on the WAWF receiving report upon confirmation of compliance. The solicitation enforces full and open competition under a small business set-aside classification, with all required data included in the item’s price. The contract is managed by the Department of Defense’s Maritime Supply Chain, and inquiries should be directed to the primary point of contact, Bryan Fair, via the provided email and phone number.
MARITIME SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of Defense → NUCLEAR REACTOR PROGRAM

Same awarding agency

NAICS: 336412
New
DIBBS
SCREW, CAP, HEXAGON HEAD
Solicitation # SPE7M2-26-T-5993
The item specified is a hexagon head cap screw with NSN 5305-01-623-2612, with a quantity of 54 units required under purchase request 7017684909. Delivery is due in 161 days after contract award. The solicitation, identified as SPE7M2-26-T-5993, was posted on August 4, 2026, with responses due by August 17, 2026. The procurement falls under NAICS code 336412 and is managed by the Nuclear Reactor Program within the Department of Defense, with performance located in New Cumberland, Pennsylvania. The contract enforces DLA packaging requirements and incorporates technical and quality standards referenced through R-numbers from the DLA Master List of Technical and Quality Requirements, applicable based on the acquisition type and timeline. Inspection and acceptance occur at the origin, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. The technical data associated with this item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and formal DLA authorization. The point of contact for inquiries is David Larsen, reachable via email and phone provided.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332919
New
DIBBS
TEE, PIPE
Solicitation # SPE7M2-26-Q-0717
The contract requires the procurement of 385 units of a copper alloy socket type tee pipe, identified by NSN 4730-00-542-5250, to be manufactured using a metal casting process with associated tooling. The item must comply with MIL-DTL-1183K(2) and other technical specifications referenced in the DLA Master List of Technical and Quality Requirements, and all deliveries must be completed within 100 days after contract award. The contract is a total small business set-aside under FAR 19.5, mandating that only small business concerns may respond, and the solicitation process is conducted through DIBBS. Technical documentation, including a Certificate of Quality Compliance (COQC), must be generated for each manufacturing lot and submitted electronically via the iRAPT system as an attachment to the receiving report; the COQC must conform to the Supplemental Quality Assurance Provision and be available for government review at the time of acceptance. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the item, except for specific functional uses such as in batteries, fluorescent lights, sensors, or weapon systems, where portable devices must be shockproof and contain a secondary containment barrier per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E and DLA’s RP001 requirements, including the use of corrosion-inhibiting wrap material, desiccant preservation, and sealed containers; brazing rings, if supplied, must be sealed in waterproof bags and attached to the main component, not shipped separately. Items must be labeled and barcoded according to MIL-STD-129, featuring both linear and Data Matrix codes, and shipped to the DLA New Cumberland Facility with the designated DoDAAC codes. All invoicing and receiving reports must be processed through WAWF, and payment is subject to the terms of FAR 52.232-7006. Configuration changes require formal engineering change proposals and deviation requests under RQ002, and any non-accepted supplies must have government markings removed per RQ011. The solicitation allows for award based on best value, considering past performance, delivery timeliness, and price without assigning numerical weights, and the government retains the right to accept or reject supplies at the destination point based on full compliance with all technical, quality, and documentation standards.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332722
New
DIBBS
NUT, SLEEVE
Solicitation # SPE7M2-26-Q-0714
The contract pertains to the procurement of 167 fixed bushings, identified as nuts and sleeves, with the NSN 5310-00-916-7522, designed for use in military applications under the Nuclear Reactor Program of the Department of Defense. The component features a #6 .138 inch - 32 UNC-2B threaded nut size and is constructed from aluminum alloy 2024 with an overall cadmium surface treatment, except for the internal locking insert which is made of polytetrafluoroethylene, providing a self-locking mechanism to prevent loosening under vibration. The item is classified as a commercial item and must comply with the current revision of the applicable part standard, whether military or consensus non-government standard, with previous revisions still acceptable for hardware manufactured before the solicitation date. All units must bear identification markings consistent with MIL-STD-130N and adhere to the DLA Master List of Technical and Quality Requirements referenced in the procurement documents, including quality conformance inspection and removal of government identification from non-accepted supplies. The solicitation, under number SPE7M2-26-Q-0714, is a total small business set-aside with a response deadline of August 11, 2026, and a 100-day delivery window after award. Mercury and mercury-containing compounds are strictly prohibited from direct contact with the hardware, except in limited, approved cases such as functional batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or specified chemical reagents by NAVSEA, with portable devices containing mercury requiring shockproof construction and a secondary containment layer as per NAVSEA 5100-003D. Packaging must meet DLA requirements and all supplies are subject to federal procurement rules for military hardware. The point of contact for the procurement is Alla Yakover, and performance is required at Hill AFB, Utah, with all submissions governed by the DLA’s eProcurement system and procurement guidelines.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 6 days
View Details
NAICS: 335999
New
DIBBS
CONTACT, ELECTRICAL
Solicitation # SPE7M2-26-Q-0718
This contract pertains to the supply of electrical contacts designated by NSN 5999-01-082-0297, with a quantity of 7,597 units to be delivered under a firm fixed price arrangement with zero variance allowed in quantity. Delivery is required within 250 days after the award date, with inspection and acceptance occurring at the destination. The item is classified as a commercial item and is listed on a qualified products list, requiring strict adherence to the SAE AS39029E standard, including the mandatory marking of both the current and most recently superseded part numbers on each unit pack. The product is designated a critical application item with technical documentation aligned to TDP Rev B Gen 3 and must comply with MIL-STD-2073-1E packaging standards, including specific preservation methods, packaging materials, and unit container configurations. Marking must follow MIL-STD-129 with no special marking required. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for specified functional uses like batteries, fluorescent lamps, sensors, and naval system components, which must meet additional containment and shockproofing requirements per NAVSEA 5100-003D. All packaging, labeling, and shipping of hazardous materials must comply with IP025 requirements. The contract references the DLA Master List of Technical and Quality Requirements for incorporated technical and quality mandates, with revisions controlled by the solicitation issue date. Deliveries are to be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLAD Proc Note C19 and C20. The contract was issued under solicitation SPE7M2-26-Q-0718 with a proposal deadline of August 11, 2026, and the requirement is funded for a material need date of July 17, 2027.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332722
New
DIBBS
WASHER, LOCK
Solicitation # SPE7M2-26-T-5985
This contract specifies the procurement of lock washers identified by NSN 5310-01-339-6531 under solicitation SPE7M2-26-T-5985, requiring full and open competition with no deviations or waivers permitted unless formally approved. The item must comply with technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, and must adhere to NASM35338 Revision 5 and ASME B18.21.1 Revision 9 specifications. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware except in explicitly allowed applications such as batteries, fluorescent lamps, instruments, sensors, weapon systems, and chemical reagents approved by NAVSEA; portable fluorescent lamps and instruments containing mercury must include shock-proof construction and a secondary containment boundary as per NAVSEA 5100-003D. The product is designated as a critical application item requiring strict configuration control and engineering change proposal procedures. The contract includes two delivery lines for a total quantity of 128 hardware units, with each line specifying a quantity of 11 and 117 units respectively, to be delivered in HD (hand) units under FOB origin terms, with zero tolerance for variance in quantity. Delivery must occur within 105 days from contract award, with inspection and acceptance occurring at the destination. Packaging must conform to MIL-STD-2073-1E and ASTM D3951 standards with preservation method code 10, and marking must follow MIL-STD-129 with no special marking required. Palletization must comply with DLA packaging requirements. Shipments are directed to two DLA distribution depots: Hill AFB, Utah, and Robins AFB, Georgia, with defined freight and parcel post addresses provided. The need ship dates are December 1, 2026 and December 26, 2027, while the original required delivery date is March 27, 2027. The contract is managed by the Department of Defense’s Nuclear Reactor Program, with primary points of contact listed for inquiries. All items must satisfy the DoD-authorized unit of issue and related ANSI X12 standards as referenced by DLA.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, ELECTR
Solicitation # SPE7M2-26-T-5987
This contract specifies the procurement of a fixed electrolytic capacitor with NSN 5910013072343 and part number M39003/01-7300, governed by MIL-PRF-39003/1L and MIL-PRF-39003P Supp 1, with compliance required to the current revision of the DLA Master List of Technical and Quality Requirements referenced by R-numbers. The item is classified as a commercial item and is subject to strict Qualified Products List (QPL) requirements, meaning the manufacturer must be QPL-approved at the time of award. Mercury and mercury-containing compounds are strictly prohibited in the product unless exempted for specific functional uses such as batteries or sensors, and portable devices containing mercury must meet shock-proof and secondary containment standards per NAVSEA 5100-003D. Use of Class I ozone-depleting substances is prohibited in all manufacturing and processing steps unless explicitly approved in writing by the contracting officer, with exceptions for commercial items and numbered parts only. The item must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, including specific lead finish labeling per IPC/JEDEC J-STD-609 on each unit package. Sampling follows MIL-STD-1916 or ASQ H1331 with zero nonconformances required unless otherwise stipulated, and critical attributes are verified at the highest levels. The product must be delivered FOB origin within 161 days, with no quantity variance allowed, inspected and accepted at destination, and shipped to the specified DLA Distribution Warner Robins address. The contract was solicited under SPE7M2-26-T-5987 with a response deadline in August 2026, and delivery is required by May 9, 2027.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HEAD
Solicitation # SPE7M2-26-T-5990
The contract specifies the procurement of 977 units of a hexagon head cap screw identified by NSN 5305-00-226-9201 and part number MS35311-158, meeting the requirements of MIL-STD-130N for identification marking and MIL-STD-129 for packaging and labeling. The item is classified as a commercial item and must be manufactured to the current revision of the applicable part standard, with past production versions accepted only if they were current at the time of manufacture. The screw is designated a critical application item and must comply with stringent quality conformance inspections under MIL-STD-1916 or ASQ H1331 using zero defect acceptance criteria for all attributes unless otherwise specified. Packaging must adhere to MIL-STD-2073-1E with specific preservation methods and prohibition of mercury or mercury compounds in any packaging materials. The item must be delivered FOB origin within 161 days from the solicitation date, with no variance allowed in quantity, and inspected and accepted at the destination. The delivery address is the DLA Distribution Center in New Cumberland, PA, and the contract mandates compliance with all DLA packaging, marking, and quality requirements referenced in the DLA Master List of Technical and Quality Requirements. The solicitation number is SPE7M2-26-T-5990 with a response deadline of August 17, 2026, and the unit price is $977.00 per each, totaling $952,529.00.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334419
New
DIBBS
SOCKET, PLUG-IN ELEC
Solicitation # SPE7M2-26-T-5983
The contract specifies the procurement of one plug-in electrical socket with NSN 5935-01-604-0735 and part number RSN116890 from AMPHENOL PCD INC, under solicitation SPE7M2-26-T-5983. Delivery is required within 20 days FOB destination with no quantity variance allowed, and acceptance occurs at the delivery point. Packing must comply with MIL-STD-2073-1E and marking must follow MIL-STD-129 with no special marking codes. Packaging and palletization adhere to DLA’s RP001 requirements, and all handling of hazardous materials must conform to IP025 standards. The item is to be delivered to USS HIGGINS DDG 76 at FPO AP 96667, with transportation governed by DLAD PROC NOTES C19 and C20. The original required delivery date is July 31, 2026, and the contract is tied to project EK5 TP 2 with vendor tracking code YNCA01 SIG A. Technical and quality requirements are governed by the DLA Master List referenced in RA001, and the solicitation falls under NAICS code 334419 managed by the Department of Defense’s Nuclear Reactor Program.
Other Electronic Component Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECTRI
Solicitation # SPE7M2-26-T-5986
This contract specifications pertain to a electrical plug connector designated by NSN 5935-01-260-5258 and part number D38999/26WD35PB, required in a quantity of 2,600 units to be delivered FOB origin within 161 days. The item must conform to MIL-DTL-38999N and MIL-DTL-38999/26G standards and is classified as a qualified product under the DLA Qualified Products List for connector assemblies and electrical contacts. Manufacturing sources are restricted: materials produced by Amphenol, Matrix, or Pyle National between July 2006 and June 2016 are prohibited, as are items from Bendix Corporation manufactured between January 1977 and February 1984. Traceability documentation may be requested to verify manufacturing dates and origins. The product is designated as a critical application item and must be free of mercury and its compounds except in approved applications such as batteries, laboratory instruments, and weapon systems, with additional containment requirements for portable devices containing mercury. Use of Class I ozone-depleting substances is strictly prohibited in any phase of production unless written approval is granted. Packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129 with no special marking required. Delivery is to the DLA Distribution Center in New Cumberland, Pennsylvania, with inspection and acceptance occurring at destination. The contract enforces zero variance in quantity and requires the unit of issue to be each. The solicitation was issued on August 4, 2026, with responses due by August 17, 2026, under contract number SPE7M2-26-T-5986.
Electronic Connector Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333912
New
DIBBS
FILTER-REGULATOR, AI
Solicitation # SPE7M2-26-T-5989
The contract specifies the procurement of five Filter-Regulator, AI units under NSN 4930-01-561-7701, with a unit price of $5.00 and a total value of $25.00, awarded under solicitation SPE7M2-26-T-5989. Delivery is required within 154 days from the contract award date, with FOB origin shipping terms, and inspection and acceptance points set at the destination. Packaging must conform to MIL-STD-2073-1E, with specific preservation methods, wrap materials, and unit container codes, and marking must follow MIL-STD-129 without special markings. Palletization adheres to DLA packaging requirements, and the delivery address is the DLA Distribution facility in New Cumberland, PA. The item is subject to strict prohibition against intentional addition of mercury or mercury-containing compounds, except for functional uses in specified equipment like batteries, fluorescent lamps, instruments, and naval-referenced chemical reagents, with portable mercury-containing devices requiring shockproof design and secondary containment per NAVSEA 5100-003D. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with applicable revisions controlled by the solicitation or award date depending on acquisition size. The required ship date is January 19, 2027, with the original delivery deadline set for April 1, 2027, and all transportation logistics follow DLA procedural notes C19 and C20.
Air and Gas Compressor Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7M2-26-Q-0719
The contract awards O-rings under NSN 5331-00-167-5126 with a total quantity of 2,210 units distributed across three delivery points: Norfolk Virginia, San Diego California, and Warner Robins Georgia, with delivery required within 150 days of award. The items must comply with SAE AS3209C and AMS7276J specifications and are classified as critical application items subject to strict quality control. Manufacturing and assembly must be performed only by accredited entities listed on the Performance Review Institute’s Qualified Manufacturer List or Qualified Product List, accessible via eAuditNet. The contract prohibits the use of mercury or mercury-containing compounds in any part of the product, packaging, or preservation, with narrow exceptions for functional components like batteries and sensors specifically authorized by NAVSEA, and mandates shock-proof designs with secondary containment for permissible mercury-containing items. Zero-tolerance sampling applies under MIL-STD-1916 or equivalent zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively. Packaging must adhere to MIL-STD-2073-1E and DLA’s RP001 standards, including strict compliance with MIL-STD-129 marking rules and a ban on class I ozone-depleting chemicals in all materials and processes. Pricing is firm fixed price with no tolerance for quantity variances, inspection and acceptance occur at destination, and FOB terms are origin. All deliveries must use designated military shipping addresses and follow DLA transport protocols.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332618
New
DIBBS
WIRE FABRIC
Solicitation # SPE7M2-26-T-5994
The contract pertains to the procurement of wire fabric specified as flattened tubular form, made from 304 stainless steel annealed wire with a diameter of 0.008 inch, featuring seven plus or minus one quarter courses per inch at equal spacing, with a crimped mesh depth between 0.125 and 0.150 inch and a peak-to-peak measurement of 5/16 inch. Each roll measures 30 inches in width with a tolerance of plus or minus one half inch and is 50 linear yards in length. The material must not contain mercury or mercury-containing compounds except for specific functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical analysis reagents authorized by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and have a secondary containment barrier as per NAVSEA 5100-003D. Class I ozone-depleting chemicals are strictly prohibited, and any substitute chemicals require prior approval unless explicitly permitted by specifications. The product is designated a critical application item with approved part numbers from Claremont Sales Corp, Koch Engineering Co, and Parker-Hannifin Corporation. The NSN is 5335-00-598-9404, with a total quantity of 33 units ordered at a unit price to be determined, delivered FOB origin. Delivery must be completed within 161 days, with a required ship date of January 26, 2027, and an original required delivery date of March 27, 2027. Packaging must comply with MIL-STD-2073-1E, marking must follow MIL-STD-129 using special code ZZ, and palletization must adhere to DLA packaging requirements. Vinyl or plastic-coated pressure-sensitive labels are permitted for marking structural shapes and secured lifts. All shipments are to be delivered to DLA Distribution San Joaquin, Tracy, California, with transportation and freight instructions governed by DLA procedures. The solicitation was issued under a Total Small Business Set-Aside with NAICS code 332618 and is part of the Department of Defense’s Nuclear Reactor Program.
Other Fabricated Wire Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details