Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Aerodynamics Research & Simulation

Active

Federal

Response Deadline05/10/2031, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Aerodynamics Research and Simulation subcontract, issued by the Department of Defense under the USAF AFRL, focuses on the discovery, development, and validation of integrated aerodynamic technologies for prime contractors. The scope of work involves conducting fluid dynamic process analysis, theoretical modeling, simulation, and experimental validation specifically for aerodynamic components operating in Mach 3+ flight regimes. The project requires the use of high-speed fluid dynamics and simulation software to produce technical reports, validated aerodynamic models, and simulation data. This effort falls under NAICS code 541330 and is scheduled for a response deadline of May 10, 2031.

General Info

DoD subcontract for Mach 3+ aerodynamic technology development and simulation by May 2031.

Agency

Department Of Defense → FA2391 USAF Afmc Afrl Pzl Afrl Rqkp

NAICS

541330 - Engineering Services

Place of Performance

OH, USA

Set-Aside

NONE

Documents

This scope was carved out of FA2391-23-S-2403.

The full solicitation package (62 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Pioneering Aerospace Capabilities, Engineering and Research

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJul 15

subcontract

Response DeadlineMay 10

Submission deadline

Response Deadline

05/10/2031, 07:00:00 PM UTCin over 4 years

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA2391 USAF Afmc Afrl Pzl Afrl Rqkp

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → FA2391 USAF Afmc Afrl Pzl Afrl Rqkp

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs discovery, development, and validation of integrated aerodynamic technologies for prime contractors on AFRL aerospace projects. Conducts fluid dynamic process analysis, theoretical modeling, simulation, and experimental validation of aerodynamic components for Mach 3+ flight regimes. Utilizes high-speed fluid dynamics and simulation software. Delivers technical reports, validated aerodynamic models, and simulation data.

Similar Contracts

Same NAICS industry code

Pure Water Southern California Direct Potable Reuse Testing Facility

Solicitation # pure-water-southern-california-direct-potable-reuse-testing-facility

Kiewit Infrastructure West Co. is seeking proposals for the Pure Water Southern California Direct Potable Reuse Testing Facility project located in California. This solicitation is specifically set aside for small businesses, including SBA certified Veteran Owned, Service-Disabled Veteran Owned, and Women-Owned Small Businesses, falling under NAICS code 541330 for engineering services. The solicitation was posted on October 25, 2026, and requires responses to be submitted by the deadline of November 3, 2026. Interested parties should coordinate with the primary point of contact, Sepideh Aria, for further details regarding the submission process and project requirements.

Kiewit Infrastructure West Co.

POSTED

DEADLINE

Business Impact Analysis and Update Disaster Recovery Plan Services – Inland Empire Utilities Agency

Solicitation # business-impact-analysis-update-disaster-recovery-plan-services-inland-empire-utilities-agency

Aanko Technologies Inc. is soliciting certified DBE and SBE sub-consultants and suppliers to provide professional services for the Inland Empire Utilities Agency in San Bernardino and Riverside Counties, California. The scope of work focuses on emergency management, business continuity planning, technical writing, data collection, and the updating of IT and disaster recovery plans. This opportunity is targeted toward firms specializing in administrative management, engineering services, computer systems design, and public relations. Interested parties must submit their responses by November 17, 2026. The project falls under several NAICS codes, including 541611, 541330, 541512, and 541820. Primary coordination for this solicitation is handled by Liz Jordan-Wettstein at Aanko Technologies Inc.

Aanko Technologies Inc.

POSTED

DEADLINE

Stream Restoration and Natural Channel Design EngineeringThis subcontract opportunity involves providing detailed engineering and plan design for the physical restoration of 4,200 linear feet of stream for projects within the City of Rogers. The selected contractor will support prime contractors by utilizing Natural Channel Design engineering and stream morphology assessment tools via CAD software to deliver final engineering plans and specifications. Qualified candidates must hold a Professional Engineer license and provide a completed Standard Form 330, Part II. This project falls under NAICS code 541330 and is managed through the Community Development agency in Arkansas, with a response deadline of November 10, 2026.

Community Development

POSTED

about 8 hours ago

DEADLINE

Hydrologic and Hydraulic Modeling ServicesThis subcontract for Hydrologic and Hydraulic Modeling Services involves performing complex water flow analysis and modeling for prime contractors working on stream restoration projects for the City of Rogers. The selected provider will be responsible for conducting hydrologic and hydraulic modeling within urban stream settings, specifically analyzing floodplains and jurisdictional waters using HEC-RAS and HEC-HMS software. The primary deliverables include comprehensive H&H model reports and data intended to inform the final plan design. Qualified candidates must hold a Professional Engineer license and provide a completed Standard Form 330, Part II. This opportunity is categorized under NAICS code 541330 and is managed through the Community Development agency in Arkansas. Interested parties must submit their responses by the deadline of November 10, 2026.

Community Development

POSTED

about 8 hours ago

DEADLINE

2026 CPRG NCD SOQ

Solicitation # 2026-SOQ-004

The City of Rogers is soliciting Statements of Qualifications (SOQ) under solicitation number 2026-SOQ-004 for Natural Channel Design services to restore approximately 4,200 linear feet of stream in an urban setting. The scope of work includes engineering, plan design, hydrologic and hydraulic modeling, and the procurement of all necessary local, state, and federal regulatory permits, including potential Letter of Map Revision submissions to FEMA. This project is funded by the Climate Pollution Reduction Grant (CPRG) subaward CPRG-NWA-001 and EPA award 02F75801, requiring compliance with EPA nondiscrimination regulations, Title VI of the Civil Rights Act of 1964, and 40 CFR Parts 5 and 7. Key milestones include the completion and approval of construction plans and permit applications by May 1, 2027, with final construction completion targeted for December 31, 2027. Selection is based on a ranking of qualifications rather than price, with the highest-ranked firm invited to negotiate a contract. Evaluation criteria focus on professional staff expertise, past performance, understanding of the scope, and the quality of the work plan. Interested firms must submit a PDF via OpenGov or hard copy to Colt Craig by November 10, 2026. Submissions are limited to 25 pages and must include Standard Form 330 Part II, an Equal Employment Opportunity policy, the Arkansas DFA Illegal Immigrant Contractor Disclosure Form, and EPA certifications regarding debarment and lobbying for contracts exceeding 100,000 dollars. Additionally, firms must maintain active registration in SAM.gov and demonstrate a commitment to DBE goals through six good faith efforts in subcontracting per 40 CFR 33.301.

Community Development

POSTED

about 8 hours ago

DEADLINE

RWP - Advanced Navigation Simulation Environment Laboratory (ANSEL)

Solicitation # FA9101269ANSEL

FA9101 Aedc Pkp Procrmnt Branch

POSTED

about 8 hours ago

DEADLINE

Electrical & Street Lighting DesignThis subcontract opportunity involves providing electrical and street lighting design services for prime contractors working on projects within the City of Ocoee, Florida. The scope of work focuses on designing street and pedestrian lighting as well as the undergrounding of electrical utilities to replace existing overhead lines. Key responsibilities include coordinating directly with Duke Energy for power and lighting requirements and delivering comprehensive electrical lighting plans and undergrounding specifications. Qualified candidates must hold a valid Florida Professional Engineer license to perform this work. The project is managed under the Development Services agency and falls under NAICS code 541330. Interested parties should note that the response deadline for this solicitation is December 1, 2026.

Development Services

POSTED

about 10 hours ago

DEADLINE

in about 1 month

Water and Sewer Utility DesignThis subcontract for Water and Sewer Utility Design involves providing specialized engineering services for the extension and upgrade of potable water and sewer systems on infrastructure projects within the City of Ocoee, Florida. The selected contractor will work under prime contractors to deliver utility layout plans and water and sewer specifications, while evaluating the feasibility of gravity sewers, shared private force mains, and public versus private sewer lift stations. To be eligible for this engagement, the provider must hold a valid Florida Professional Engineer license. The project is managed by the Development Services agency, with a response deadline set for December 1, 2026.

Development Services

POSTED

about 10 hours ago

DEADLINE

in about 1 month

Stormwater Management & Drainage DesignThis subcontract opportunity involves providing specialized stormwater management and drainage design services for road extension projects within the City of Ocoee, Florida. The selected contractor will work under prime contractors to perform critical hydrologic and hydraulic analyses, design comprehensive drainage systems, and develop stormwater modification plans. These tasks require the strict application of stormwater runoff systems and retention or detention specifications to ensure effective infrastructure development. Managed by the Development Services agency, the contract mandates that the performing party holds a valid Florida Professional Engineer license. The primary deliverables include finalized stormwater management plans and detailed drainage designs. Interested parties should note the response deadline of December 1, 2026, for this engineering project categorized under NAICS code 541330.

Development Services

POSTED

about 10 hours ago

DEADLINE

in about 1 month

Civil Engineering & Roadway Design Sub-consultantThis subcontract opportunity is for a Civil Engineering and Roadway Design Sub-consultant to provide primary geometric design and engineering services for prime contractors on roadway projects within the City of Ocoee, Florida. The selected firm will be responsible for developing construction documents for bidding and permitting, with a specific focus on pedestrian crossings, specialized intersection treatments, hardscape, and signage. All work must adhere to established roadway geometry and intersection design standards, and the firm must deliver comprehensive civil design plans, intersection details, and signage schedules. A critical requirement for this engagement is that the performing entity must hold a valid Florida Professional Engineer license. The project falls under NAICS code 541330 and is managed through the Development Services agency. Interested parties should note the response deadline of December 1, 2026.

Development Services

POSTED

about 10 hours ago

DEADLINE

in about 1 month

Request for Qualifications (RFQ) No. 27-001 Design & Engineering Services for Pine Street Extension

Solicitation # 27-001RFQ

The City of Ocoee, Florida, is soliciting qualifications from licensed professional engineering and design firms for the Pine Street Extension project, spanning from Palm Drive to Prosperity Farms Road. The scope of work involves the reconstruction and extension of approximately 0.5 miles of roadway, including the design of stormwater and utility modifications, water and sewer installations, pedestrian crossings, specialized intersection treatments, and street lighting in coordination with Duke Energy. The selected firm will be responsible for deliverables through the 90 percent plans submittal and subsequent response to comments, ensuring the final output is sufficient for permitting, bidding, and construction. Compliance with Florida State law, the Consultants Competitive Negotiations Act, and various local and regional land development codes is required. The selection process is governed by the Consultants Competitive Negotiations Act, where an evaluation committee will recommend the top three ranked firms to the City Commission. The City will then attempt to negotiate an agreement with the top-ranked respondent. Submissions must be uploaded via the OpenGov e-Procurement platform by 2:00 p.m. local time on December 1, 2026. Qualification packages are limited to 50 pages, excluding required forms, and must be submitted separately from the cost proposal. Required documentation includes a variety of certifications, such as non-collusion affidavits, drug-free workplace certifications, and disclosures regarding scrutinized companies and foreign countries of concern. The successful consultant must maintain comprehensive insurance coverage, including a 1,000,000 dollar combined single limit per occurrence for general liability and 1,000,000 dollars for professional liability. All policies must be issued by companies with a Best Rating of A or better and a Financial Size Category of VII or better. The City is exempt from all insurance deductibles, which remain the responsibility of the consultant. Additional requirements include adherence to Florida WaterStar landscaping and irrigation standards and the provision of a detailed project timeline identifying all key milestones.

Development Services

POSTED

about 10 hours ago

DEADLINE

in about 1 month

Maintenance Acquisition Support Services for Sierra Nevada Region (SNR)The Western Area Power Administration, under the Department of Energy, is forecasting a requirement for Maintenance Acquisition Support Services for the Sierra Nevada Region. This project is designated as a small business set-aside under NAICS code 541330 and will be performed in California. The current incumbent for these services is Genco Systems Inc. Interested parties may coordinate with the Small Business Program Managers for further information regarding this upcoming acquisition.

Western Area Power Administration

POSTED

about 14 hours ago

DEADLINE

More opportunities from Department Of Defense → FA2391 USAF Afmc Afrl Pzl Afrl Rqkp

Same awarding agency

Pioneering Aerospace Capabilities, Engineering and Research

Solicitation # FA2391-23-S-2403

The Pioneering Aerospace Capabilities, Engineering and Research (PACER) program, under solicitation FA2391-23-S-2403, is a comprehensive Broad Agency Announcement issued by the Air Force Research Laboratory (AFRL) Aerospace Systems Directorate. This open, two-step solicitation is designed to fund research and development efforts that mature novel aerospace concepts and technologies to appropriate technology readiness levels, specifically targeting transformative capabilities for the warfighter. The program encompasses a wide array of specialized calls, including efforts for hypersonic weapon concepts (HAMWC), automated air-to-air refueling (CRONUS), advanced propulsion and power systems (SNAPP, AEPO, MSIPPT, HITEMP, INNATE), and multidisciplinary design and structures (MASTR, VOLARE, CC DROIDS). The acquisition process typically involves an initial white paper submission followed by full proposals from selected offerors, though some calls utilize a one-step process. Awards may take the form of contracts or assistance instruments, with anticipated types including Cost Plus Fixed Fee (CPFF), Firm-Fixed-Price (FFP), and IDIQ task orders. Due to the sensitive nature of the research, strict security protocols are enforced, requiring offerors to comply with AFRLI 61-113 for Science and Technology Protection and meet CMMC Level 2 and NIST SP 800-171 standards to access Controlled Unclassified Information (CUI). Proposals are evaluated based on the uniqueness and innovation of the approach, understanding of scope, technical soundness, and transition potential, with cost realism serving as a secondary substantial factor.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

in over 4 years

Air-Breathing Propulsion R&DThis subcontract under the Department of Defense focuses on the research and validation of technologies designed to improve the performance and reliability of advanced air-breathing propulsion engines for AFRL projects. The scope of work includes designing novel engine architectures, integrating thermal management systems into propulsion, and developing high-payoff engine components. The primary deliverables for this effort consist of engine component designs, performance validation data, and propulsion prototypes. This project is categorized under NAICS code 336412 and is managed by the FA2391 USAF Afmc Afrl Pzl Afrl Rqkp agency.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

in over 4 years

Mechanical & Thermal Systems DevelopmentThis subcontract for Mechanical and Thermal Systems Development focuses on the creation and demonstration of advanced thermal management and energy transfer systems for AFRL hypersonic platform projects. The scope of work involves researching two-phase material applications, adaptive or hybrid thermal cycle systems, high-power low-duty cycle thermal management, and electric actuation utilizing advanced magnetic materials. The contractor is responsible for delivering thermal management prototypes, comprehensive reliability reports, and system-level demonstrations to prime contractors. Managed by the Department of Defense under the agency FA2391 USAF Afmc Afrl Pzl Afrl Rqkp, the project is categorized under NAICS code 333999 and has a response deadline of May 10, 2031.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

DEADLINE

in over 4 years

Aerospace Hardware & Tooling FabricationThis subcontract, titled Aerospace Hardware and Tooling Fabrication, focuses on the production of specialized engine hardware, tooling, and physical components for prime contractors supporting AFRL projects. The scope of work involves precision machining and fabrication of engine components and assembly tooling based on specific geometry data, resulting in the delivery of geometry-verified components and hardware sets. Managed by the Department of Defense under the agency FA2391 USAF Afmc Afrl Pzl Afrl Rqkp, the contract falls under NAICS code 332710. It was posted on July 15, 2026, with a response deadline set for May 10, 2031.

POSTED

DEADLINE

in over 4 years

Digital Engineering & MDAO ToolingThis subcontract focuses on the supply and development of advanced design tools for prime contractors supporting AFRL aerospace projects. The scope of work involves the creation of digital twins, mission-specific optimization tools, and the implementation of Model-Based Systems Engineering frameworks. By utilizing Multi-Disciplinary Analysis and Optimization, the project aims to deliver comprehensive software tools, digital models, and MDAO frameworks to enhance aerospace engineering capabilities. Managed under the Department of Defense for the USAF AFMC AFRL, the contract falls under NAICS code 541511. The engagement is scheduled to begin around July 15, 2026, with a response deadline extending to May 10, 2031.

Custom Computer Programming Services

POSTED

DEADLINE

in over 4 years

Technical Documentation and Software Deliverables SupportThe contract focuses on providing technical documentation and software deliverables that meet strict compliance standards set by the Air Force Research Laboratory and the Defense Contract Management Agency. Key deliverables include technical manuals, user guides, validation reports, and related software outputs, all of which must adhere to defined military and federal regulatory frameworks to ensure accuracy, traceability, and operational readiness. This work supports critical defense systems and is conducted under a subcontract arrangement tied to the broader Department of Defense infrastructure, with performance centered in Saint Louis, Missouri, at zip code 63134. The North American Industry Classification System code 541611 indicates the primary focus is on scientific and technical consulting services, reflecting a high level of specialized expertise required in documentation, testing, and compliance validation for aerospace and defense applications.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Advanced Manufacturing Process AnalysisThe contract titled Advanced Manufacturing Process Analysis requires engineering analysis of aerospace manufacturing processes focused on core and termination systems, with an emphasis on process modeling and the integration of production data into the ACTA tool. The work is technical in nature and centers on enhancing manufacturing efficiency and reliability through data-driven insights and analytical modeling tailored to aerospace production environments. Performance is specified to occur in Saint Louis, Missouri, with a ZIP code of 63134, indicating the primary location for on-site technical activities and data collection. This is a subcontract under the NAICS code 541340, which classifies it as engineering services, and is awarded by the Department of Defense through the FA2391 USAF AFMC AFRL PZL AFRL RQKP office. The contract was posted on June 29, 2026, and is intended to support critical aerospace manufacturing initiatives by transforming raw production data into actionable engineering knowledge. There is no set-aside designation provided, and no point of contact is listed, suggesting that communication and contract administration will be handled through standard DOD subcontract channels. The absence of a solicitation number implies the contract may have originated from a pre-existing or indirect procurement mechanism within the AFRL framework.

Drafting Services

POSTED

DEADLINE

Test Data Production and Validation ServicesThe contract seeks to generate and validate empirical test data to support the ACTA computational model, requiring the design and execution of detailed test protocols alongside the delivery of fully calibrated datasets. This effort is critical for ensuring the accuracy and reliability of computational outputs through real-world validation, with all data produced meeting stringent technical standards for calibration and relevance. The work involves end-to-end responsibility for test design, execution, and data delivery, emphasizing precision, repeatability, and alignment with ACTA’s modeling requirements. The contract is classified as a subcontract under NAICS code 541380, associated with scientific research and development services, and is tied to the Department of Defense through the USAF AFMC AFRL PZL AFRL RQKP office. Performance is required in Saint Louis, Missouri, at ZIP code 63134, with no formal set-aside designation. The solicitation was posted on June 29, 2026, indicating it is an upcoming opportunity for qualified entities to provide specialized testing and validation services essential to advancing defense-related computational capabilities.

Testing Laboratories and Services

POSTED

DEADLINE

Computational Software Development for Aerospace AnalysisThe contract entails the development, validation, and ongoing maintenance of a specialized computational analysis tool designed for core and termination modeling within aerospace systems. This effort requires advanced algorithm development, seamless integration of software components, and rigorous testing to ensure accuracy, reliability, and performance under demanding operational conditions. The work focuses on enabling precise simulation capabilities critical to aerospace design and analysis, with deliverables expected to meet high technical standards for use in defense-related applications. The contract is classified as a subcontract under NAICS code 541721, issued by the Department of Defense through the FA2391 USAF AFMC AFRL PZL AFRL RQKP office, with performance centered in Saint Louis, Missouri, at ZIP code 63134. The project supports critical aerospace research and development objectives and is expected to involve close collaboration with technical stakeholders to align the software tool with mission-critical requirements. Although the solicitation number and point of contact are not provided, the posting date of June 29, 2026, indicates the timeframe for procurement activities and anticipated execution.

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS