Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

Advanced Manufacturing Process Analysis

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled Advanced Manufacturing Process Analysis requires engineering analysis of aerospace manufacturing processes focused on core and termination systems, with an emphasis on process modeling and the integration of production data into the ACTA tool. The work is technical in nature and centers on enhancing manufacturing efficiency and reliability through data-driven insights and analytical modeling tailored to aerospace production environments. Performance is specified to occur in Saint Louis, Missouri, with a ZIP code of 63134, indicating the primary location for on-site technical activities and data collection. This is a subcontract under the NAICS code 541340, which classifies it as engineering services, and is awarded by the Department of Defense through the FA2391 USAF AFMC AFRL PZL AFRL RQKP office. The contract was posted on June 29, 2026, and is intended to support critical aerospace manufacturing initiatives by transforming raw production data into actionable engineering knowledge. There is no set-aside designation provided, and no point of contact is listed, suggesting that communication and contract administration will be handled through standard DOD subcontract channels. The absence of a solicitation number implies the contract may have originated from a pre-existing or indirect procurement mechanism within the AFRL framework.

General Info

Engineering analysis of aerospace manufacturing processes using data-driven modeling in Saint Louis, Missouri for the Department of Defense.

Agency

Department Of Defense → FA2391 USAF Afmc Afrl Pzl Afrl RqkpView Agency

NAICS

541340 - Drafting ServicesView NAICS

Place of Performance

Saint Louis, MO, 63134, USA

Set-Aside

NONE

Documents

This scope was carved out of FA239126FB015.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Advanced Core And Termination Analysis (ACTA)

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA2391 USAF Afmc Afrl Pzl Afrl Rqkp
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → FA2391 USAF Afmc Afrl Pzl Afrl Rqkp
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Provide engineering analysis of aerospace manufacturing processes for core and termination systems, including process modeling and integration of production data into the ACTA tool.

Similar Contracts

Same NAICS industry code

NAICS: 541340
New
Federal
MACH1_AOI_Military Working Dog Kennels at JBSA-LOE1_Amend 1
Solicitation # FA8903-26-OT002
The 772nd Enterprise Sourcing Squadron, in coordination with the Air Force Civil Engineer Center, is seeking an innovative commercial partner under the Modernized Agile Construction Horizons (MACH1) Umbrella Program to upgrade Military Working Dog kennel facilities at Joint Base San Antonio Lackland and the Chapman Annex. The project is structured into two lines of effort, with the current focus on Line of Effort 1, which entails the design and planning of facilities capable of housing and training 850 dogs. The objective is to develop a mature, site-specific design package using non-traditional construction methods, such as Engineered Tensile Facilities, Industrialized Construction, or 3D-printed and additive techniques, to bypass traditional military construction timelines. The resulting structures must have an anticipated lifespan of approximately 40 years and strictly adhere to the Animal Welfare Act, DoD Unified Facilities Criteria, and specific Air Force veterinary and security mandates. Any resulting agreement will be executed as an Other Transaction Agreement under the statutory authority of 10 U.S.C. section 2808a. While the current phase focuses on design, the rough order of magnitude target budgets for construction are not to exceed 160 million dollars for Lackland AFB and 180 million dollars for the Chapman Annex. Interested partners must submit a Phase 1 Solution Brief by September 11, 2026. This brief is limited to five pages, excluding the title page, and must detail the technical approach, a high-level milestone schedule, and company credentials, including three completed projects exceeding 20 million dollars using non-traditional methods within the last decade. Submissions will be evaluated based on technical merit, speed to design completion, and company viability to determine eligibility for a Phase 2 pitch session.
FA8903 772 Ess Pk

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 541340
New
SLED
Architectural and Engineering Services with Landscape Design Colt Park Carriage House and Gardener’s Cottage Structural Stabilization.
Solicitation # 6299
The City of Hartford Department of Public Works and Colt Park are soliciting proposals from qualified Architects, Engineers, and Landscape Architects for solicitation number 6299. The project involves providing professional design, construction estimating, and construction documents for the structural stabilization of the Carriage House and Gardener's Cottage at Colt Park. Responses are due by September 29, 2026, at 6:00 PM. The primary point of contact for this procurement is Susan Sheppard. Selected providers must adhere to comprehensive compliance and legal requirements, including the submission of a W-9 form, a sworn affidavit confirming no delinquent taxes, and a detailed Equal Employment Opportunity report. The contract requires strict adherence to the City of Hartford's professional services insurance standards, including specific coverage for general, professional, pollution, and cyber liability, with the City named as an additional insured. Additionally, the winning firm must certify compliance with prevailing wage rates through a Wage Certification Form and follow the established terms and conditions for professional and consulting services, which include specific provisions regarding indemnification, non-discrimination, and termination.
Procurement Services Unit Department of City of Hartford

POSTED

1 day ago

DEADLINE

in 19 days
View Details
NAICS: 541340
New
SLED
Town Planning Consultancy Services (UK-Based)
Utah Valley University

POSTED

2 days ago

DEADLINE

in 15 days
View Details
NAICS: 541340
New
SLED
UK-Based Town Planning Consultancy Services
Solicitation # RFP-2027-1204
Utah Valley University

POSTED

2 days ago

DEADLINE

in 15 days
View Details
NAICS: 541340
New
SLED
Safe Routes to School Improvements Design Services
Solicitation # 26-0060
The City of Richland, Washington, is seeking drafting and design services under solicitation 26-0060 to develop construction plans for elementary school walk routes. The project focuses on enhancing pedestrian safety through the implementation of 20 MPH speed zones with flashing beacons, speed feedback signs, raised crosswalks, rectangular rapid flashing beacons, street lighting, and ADA-compliant curb ramps. Responses to this solicitation are due by September 22, 2026. The City emphasizes compliance with the Civil Rights Act of 1964 and the Americans with Disabilities Act, ensuring that disadvantaged business enterprises and individuals with disabilities have equal opportunities to participate in the bidding process without discrimination.
City of Richland

POSTED

4 days ago

DEADLINE

in 12 days
View Details
NAICS: 541340
New
SLED
UIRSD Designer Services On Call
Solicitation # 27 03
The Up Island Regional School District is seeking proposals from qualified firms to provide on-call designer services for the repair and improvement of a small public school. The selected firm will be responsible for designing and overseeing these projects to ensure the facility is properly maintained and upgraded. This solicitation, identified as BD-27-2173-UIRSD-C0001-133001, was posted on September 4, 2026, with a response deadline of October 1, 2026. The project is located in Vineyard Haven, Massachusetts, and the primary point of contact for this opportunity is Jocelyn Broadley.
UIRSD - Up Island Regional School District

POSTED

6 days ago

DEADLINE

in 21 days
View Details
NAICS: 541340
New
SLED
Missouri Orthopedic Institute - Room 1059 Replace OR 6 BoomThe University of Missouri - Columbia is seeking design services for the Missouri Orthopedic Institute to replace an existing single point Skytron boom with two point Stryker booms in Room 1059 of OR 6. This project is currently listed as a forecast under NAICS code 541340 for architectural, engineering, and design services. The primary point of contact for this requirement is Megan Haslag. Interested parties can find further information through the University of Missouri System's facilities planning and development construction portal.
University of Missouri - Columbia

POSTED

6 days ago

DEADLINE

N/A
View Details
NAICS: 541340
New
SLED
Missouri Orthopaedic Institute - Room 1057 Replace OR 3 BoomThe University of Missouri - Columbia is seeking design services for the Missouri Orthopaedic Institute to modify Room 1057. The project involves replacing an existing single point Skytron boom with two point Stryker booms in Operating Room 3. This opportunity is listed as a forecast under NAICS code 541340. Interested parties can coordinate with the primary point of contact, Megan Haslag, or refer to the university's facilities planning and development portal for further details.
University of Missouri - Columbia

POSTED

6 days ago

DEADLINE

N/A
View Details
NAICS: 541340
New
SLED
Missouri Orthopedic Institute - Room 1059 Replace OR 6 BoomThe University of Missouri - Columbia is seeking design services for the Missouri Orthopedic Institute to upgrade the equipment in Room 1059. The project specifically involves replacing an existing single point Skytron boom with two point Stryker booms within Operating Room 6. This opportunity is currently listed as a forecast under NAICS code 541340. Interested parties can coordinate with the primary point of contact, Megan Haslag, regarding the project requirements and procurement process.
University of Missouri - Columbia

POSTED

6 days ago

DEADLINE

N/A
View Details
NAICS: 541340
New
DIBBS
Supply of Extension Drawer Slides (NSN 5340014766067)This subcontract through the Department of Defense Land Supply Chain involves the procurement of one extension drawer slide meeting NSN 5340014766067 specifications for the USS THEODORE ROOSEVELT CVN 71. The supplier is responsible for sourcing or manufacturing the hardware, with the option to utilize additive manufacturing provided it is approved by the Engineering Support Activity. The contract requires shipment via the fastest traceable means to a performance location in FPO 96632. Interested parties must respond by September 14, 2026, under NAICS code 541340.
LAND SUPPLY CHAIN

POSTED

7 days ago

DEADLINE

in 4 days
View Details
NAICS: 541340
New
SLED
Phase II Modernization of Seattle’s Standard Specifications for Road, Bridge & Municipal Construction
Solicitation # 26-071-S
Seattle Public Utilities is soliciting proposals under solicitation number 26-071-S for a consultant to lead the Phase II Modernization of the City of Seattle Standard Specifications for Road, Bridge and Municipal Construction. The project aims to update the source file, reorganize the nine existing divisions to align with 2026 WSDOT specifications, and ensure all deliverables are fully ADA compliant. These specifications serve as the primary contract documents for public works construction within the City's Right of Way and are typically revised every three years. The City expects to award a single contract with an estimated total value between 120,000 and 150,000 dollars. Interested qualified consultants must submit their proposals by September 24, 2026. The selection process requires the submission of a mandatory consultant questionnaire covering financial responsibility, social equity compliance, and conflict of interest disclosures. The resulting agreement will be governed by City of Seattle consultant standards, including specific CAD requirements and overhead cost limitations.
Seattle Public Utilities

POSTED

7 days ago

DEADLINE

in 14 days
View Details
NAICS: 541340
SLED
Design services for Trustman roof replacement
Solicitation # BD-27-1133-1133C-1133L-132937
The Brookline Housing Authority is seeking a qualified Architect to provide design and construction administration services for the full replacement of all flat roof assemblies at the three Trustman buildings, located at the Trustman Apartments 705-1 in Brookline, Massachusetts. Identified as Project 046137, the scope requires the selected designer to be qualified under M.G.L. Chapter 7C, Section 44. The project is scheduled for completion within 57 weeks from the date of the contract signing. The contract provides a set fee of 175,000 dollars for the designer, while the estimated construction costs for the roof replacements are 2,000,000 dollars. Proposals must be submitted via the designated portal by September 23, 2026, at 2:00 PM. Primary administration for the solicitation is handled by Sharon Cowan and Chris Devoll.
1133CONVD - Brookline Housing Authority

POSTED

8 days ago

DEADLINE

in 13 days
View Details

More opportunities from Department Of Defense → FA2391 USAF Afmc Afrl Pzl Afrl Rqkp

Same awarding agency

NAICS: 336412
Federal
Air-Breathing Propulsion R&DThis subcontract under the Department of Defense focuses on the research and validation of technologies designed to improve the performance and reliability of advanced air-breathing propulsion engines for AFRL projects. The scope of work includes designing novel engine architectures, integrating thermal management systems into propulsion, and developing high-payoff engine components. The primary deliverables for this effort consist of engine component designs, performance validation data, and propulsion prototypes. This project is categorized under NAICS code 336412 and is managed by the FA2391 USAF Afmc Afrl Pzl Afrl Rqkp agency.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 2 months ago

DEADLINE

in over 4 years
View Details
NAICS: 333999
Federal
Mechanical & Thermal Systems DevelopmentThis subcontract for Mechanical and Thermal Systems Development focuses on the creation and demonstration of advanced thermal management and energy transfer systems for AFRL hypersonic platform projects. The scope of work involves researching two-phase material applications, adaptive or hybrid thermal cycle systems, high-power low-duty cycle thermal management, and electric actuation utilizing advanced magnetic materials. The contractor is responsible for delivering thermal management prototypes, comprehensive reliability reports, and system-level demonstrations to prime contractors. Managed by the Department of Defense under the agency FA2391 USAF Afmc Afrl Pzl Afrl Rqkp, the project is categorized under NAICS code 333999 and has a response deadline of May 10, 2031.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 2 months ago

DEADLINE

in over 4 years
View Details
NAICS: 541330
Federal
Aerodynamics Research & SimulationThe Aerodynamics Research and Simulation subcontract, issued by the Department of Defense under the USAF AFRL, focuses on the discovery, development, and validation of integrated aerodynamic technologies for prime contractors. The scope of work involves conducting fluid dynamic process analysis, theoretical modeling, simulation, and experimental validation specifically for aerodynamic components operating in Mach 3+ flight regimes. The project requires the use of high-speed fluid dynamics and simulation software to produce technical reports, validated aerodynamic models, and simulation data. This effort falls under NAICS code 541330 and is scheduled for a response deadline of May 10, 2031.
Engineering Services

POSTED

about 2 months ago

DEADLINE

in over 4 years
View Details
NAICS: 332710
Federal
Aerospace Hardware & Tooling FabricationThis subcontract, titled Aerospace Hardware and Tooling Fabrication, focuses on the production of specialized engine hardware, tooling, and physical components for prime contractors supporting AFRL projects. The scope of work involves precision machining and fabrication of engine components and assembly tooling based on specific geometry data, resulting in the delivery of geometry-verified components and hardware sets. Managed by the Department of Defense under the agency FA2391 USAF Afmc Afrl Pzl Afrl Rqkp, the contract falls under NAICS code 332710. It was posted on July 15, 2026, with a response deadline set for May 10, 2031.
Machine Shops

POSTED

about 2 months ago

DEADLINE

in over 4 years
View Details
NAICS: 541511
Federal
Digital Engineering & MDAO ToolingThis subcontract focuses on the supply and development of advanced design tools for prime contractors supporting AFRL aerospace projects. The scope of work involves the creation of digital twins, mission-specific optimization tools, and the implementation of Model-Based Systems Engineering frameworks. By utilizing Multi-Disciplinary Analysis and Optimization, the project aims to deliver comprehensive software tools, digital models, and MDAO frameworks to enhance aerospace engineering capabilities. Managed under the Department of Defense for the USAF AFMC AFRL, the contract falls under NAICS code 541511. The engagement is scheduled to begin around July 15, 2026, with a response deadline extending to May 10, 2031.
Custom Computer Programming Services

POSTED

about 2 months ago

DEADLINE

in over 4 years
View Details
NAICS: 541715
Federal
Pioneering Aerospace Capabilities, Engineering and Research
Solicitation # FA2391-23-S-2403
The Pioneering Aerospace Capabilities, Engineering and Research (PACER) program, under solicitation FA2391-23-S-2403, is a comprehensive initiative by the Air Force Research Laboratory (AFRL) to develop transformative aerospace technologies. This open, two-step Broad Agency Announcement (BAA) and associated calls aim to mature novel concepts and specific technologies to appropriate technology readiness levels, specifically targeting TRL 5 or 6 for high-power mission systems on autonomous collaborative platforms. The program encompasses a wide array of research thrusts, including hypersonic affordable mass weapon concepts (HAMWC), high-speed aero-propulsion (HSAPS), multidisciplinary aerodynamics and structures (MASTR), and integrated propulsion, power, and thermal management (MSIPPT). The acquisition process typically involves a two-step approach starting with the submission of white papers, followed by full technical and cost proposals for selected offerors. Awards may take the form of contracts or assistance instruments, with anticipated types including Cost Plus Fixed Fee (CPFF), Firm Fixed Price (FFP), and IDIQ task orders. Evaluation is based on a peer or scientific review, prioritizing technical innovation, understanding of scope, and transition potential, with cost realism serving as a secondary factor. Due to the sensitive nature of the research, strict security protocols are mandated, including compliance with AFRLI 61-113 for science and technology protection, NIST SP 800-171 assessments, and CMMC Level 2 certifications for access to controlled unclassified information.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

about 2 months ago

DEADLINE

in over 4 years
View Details
NAICS: 541611
Federal
Technical Documentation and Software Deliverables SupportThe contract focuses on providing technical documentation and software deliverables that meet strict compliance standards set by the Air Force Research Laboratory and the Defense Contract Management Agency. Key deliverables include technical manuals, user guides, validation reports, and related software outputs, all of which must adhere to defined military and federal regulatory frameworks to ensure accuracy, traceability, and operational readiness. This work supports critical defense systems and is conducted under a subcontract arrangement tied to the broader Department of Defense infrastructure, with performance centered in Saint Louis, Missouri, at zip code 63134. The North American Industry Classification System code 541611 indicates the primary focus is on scientific and technical consulting services, reflecting a high level of specialized expertise required in documentation, testing, and compliance validation for aerospace and defense applications.
Administrative Management and General Management Consulting Services

POSTED

2 months ago

DEADLINE

N/A
View Details
NAICS: 541380
Federal
Test Data Production and Validation ServicesThe contract seeks to generate and validate empirical test data to support the ACTA computational model, requiring the design and execution of detailed test protocols alongside the delivery of fully calibrated datasets. This effort is critical for ensuring the accuracy and reliability of computational outputs through real-world validation, with all data produced meeting stringent technical standards for calibration and relevance. The work involves end-to-end responsibility for test design, execution, and data delivery, emphasizing precision, repeatability, and alignment with ACTA’s modeling requirements. The contract is classified as a subcontract under NAICS code 541380, associated with scientific research and development services, and is tied to the Department of Defense through the USAF AFMC AFRL PZL AFRL RQKP office. Performance is required in Saint Louis, Missouri, at ZIP code 63134, with no formal set-aside designation. The solicitation was posted on June 29, 2026, indicating it is an upcoming opportunity for qualified entities to provide specialized testing and validation services essential to advancing defense-related computational capabilities.
Testing Laboratories and Services

POSTED

2 months ago

DEADLINE

N/A
View Details
NAICS: 541721
Federal
Computational Software Development for Aerospace AnalysisThe contract entails the development, validation, and ongoing maintenance of a specialized computational analysis tool designed for core and termination modeling within aerospace systems. This effort requires advanced algorithm development, seamless integration of software components, and rigorous testing to ensure accuracy, reliability, and performance under demanding operational conditions. The work focuses on enabling precise simulation capabilities critical to aerospace design and analysis, with deliverables expected to meet high technical standards for use in defense-related applications. The contract is classified as a subcontract under NAICS code 541721, issued by the Department of Defense through the FA2391 USAF AFMC AFRL PZL AFRL RQKP office, with performance centered in Saint Louis, Missouri, at ZIP code 63134. The project supports critical aerospace research and development objectives and is expected to involve close collaboration with technical stakeholders to align the software tool with mission-critical requirements. Although the solicitation number and point of contact are not provided, the posting date of June 29, 2026, indicates the timeframe for procurement activities and anticipated execution.

POSTED

2 months ago

DEADLINE

N/A
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS