Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Aerospace Chemical Treatment and Coating Services

Active

Federal

Response Deadline10/23/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Aerospace Chemical Treatment and Coating Services supports DLA Weapons Support ASC projects through the chemical conversion and priming of ribs. The scope of work involves applying chemical treatments according to MIL-DTL-5541 Type 1A or anodizing per MIL-A-8625 Type I/IC, followed by the application of MIL-PRF-23377 Type I Class C2 primer in accordance with MIL-F-18264. To execute these tasks, the contractor must utilize specialized anodizing tanks and controlled spray booths. The project is managed by the Department of Defense and will be performed at Tinker AFB. Strict adherence to ISO 9001:2015 and ITAR compliance is mandatory for the selected provider. Interested parties must respond by October 23, 2026, to provide the finished, coated components as specified under NAICS code 332813.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

NAICS

332813 - Electroplating, Plating, Polishing, Anodizing, and Coloring

Place of Performance

TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A7-27-T-1362.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

RIB, LANDING GEAR DOOR

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 15

subcontract

Response DeadlineOct 23

Submission deadline

Response Deadline

10/23/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs chemical conversion and priming for prime contractors on DLA Weapons Support ASC projects. Applies chemical treatment per MIL-DTL-5541 Type 1A or anodizing per MIL-A-8625 Type I/IC, followed by MIL-PRF-23377 Type I Class C2 primer per MIL-F-18264. Requires specialized anodizing tanks and controlled spray booths. Requires ISO 9001:2015 and ITAR compliance. Delivers finished, coated ribs.

Similar Contracts

Same NAICS industry code

Oxygen System Cleaning and Inspection ServicesThis subcontract for Oxygen System Cleaning and Inspection Services supports the Department of Defense through the DLA Weapons Support Fluid Handling Division. The selected provider will perform specialized cleaning and inspection of metal tube assemblies for prime contractors, ensuring that both interiors and exteriors are free of oils and particulates. All work must be performed in accordance with AF Drawing 8148650 for oxygen service, utilizing certified chemical degreasing systems or ultrasonic cleaners. The scope of work requires the delivery of certified oxygen-clean assemblies accompanied by detailed inspection reports. Performance will take place at Tinker AFB, zip code 73145-8000. The solicitation was posted on October 15, 2026, with a response deadline of October 26, 2026, falling under NAICS code 332813.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 11 hours ago

DEADLINE

Surface Treatment and Finishing for Check Fill UnitThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, involves providing specialized surface treatment and finishing for Check Fill Unit hardware. The selected contractor will be responsible for applying powder coating, plating, or anodizing to components in strict accordance with Basic Drawing NR 78286 S1670-15000. All work must ensure that adhesion and finish thickness comply with MIL-SPEC requirements, and the contractor is tasked with the safe management of hazardous materials following all applicable environmental regulations. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332813, with performance taking place in New Cumberland. Interested parties must respond by October 23, 2026. The primary objective of the engagement is the successful delivery of finished and coated components that meet the rigorous technical standards required for prime contractor hardware projects.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 11 hours ago

DEADLINE

Aerospace Surface Treatment and FinishingThis subcontract for Aerospace Surface Treatment and Finishing involves performing surface treatments and protective coatings for prime contractors supporting DLA Weapons Support ASC projects. The scope of work specifically requires the application of finishes to structural aircraft panels in accordance with Drawing EI-016480307, with the final delivery of finished, coated panels. Performance of these services will take place at Tinker AFB. To be eligible, contractors must maintain ISO 9001:2015 certification and typically require NADCAP accreditation for aerospace finishing. This opportunity falls under NAICS code 332813 and is managed by the Department of Defense. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 11 hours ago

DEADLINE

Specialized Industrial Coating and FinishingThis subcontract for Specialized Industrial Coating and Finishing supports DLA Troop Support Food Service Equipment projects under the Department of Defense Subsistence FSE Supply Chain. The selected provider will perform high-temperature coating and polishing for prime contractors, specifically applying powder coatings, heat-resistant paints, or stainless steel passivation to finished oven components. All work must be executed using industrial powder coating ovens and chemical passivation tanks in strict accordance with TDP Rev A Gen 1, ASTM standards, and DLA quality requirements. The opportunity is categorized under NAICS code 332813 and was posted on October 15, 2026. Interested parties must submit their responses by the deadline of October 23, 2026.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

Aerospace-Grade Surface Treatment and Coating for Fuel ValvesThis subcontract involves providing specialized surface treatments, plating, and anodizing for fuel system projects managed by the DLA Weapons Support ASC Supplier OEM Division. The contractor is responsible for applying coatings to valve components using chemical plating baths and anodizing tanks in strict accordance with TDP Rev A Gen 1 to ensure aerospace standards for wear and corrosion resistance are met. The work will be performed in Jacksonville, Florida, under NAICS code 332813. A critical requirement of the contract is the management of hazardous materials as mandated by FAR 52.223-7. Interested parties must respond by October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 11 hours ago

DEADLINE

Aerospace Surface Treatment and Non-Destructive TestingThis subcontract for Aerospace Surface Treatment and Non-Destructive Testing supports the Department of Defense through the DLA Weapons Support ASC Supplier OEM Division. The scope of work involves providing specialized coating, plating, and non-destructive testing for pylon mounts, ensuring all aerospace-grade finishes adhere to technical data packages and FED-STD-313 hazardous material standards. The contractor is responsible for utilizing NDT equipment to maintain critical quality assurance and delivering fully certified finished components. The project is categorized under NAICS code 332813 and will be performed in Cherry Point, North Carolina. Interested parties should note the posting date of October 15, 2026, with a response deadline set for October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 11 hours ago

DEADLINE

Aerospace Surface Treatment and CoatingThis subcontract for Aerospace Surface Treatment and Coating involves performing specialized surface treatments and coatings for prime contractors supporting DLA Weapons Support ASC projects. The scope of work focuses on applying chemical processing and aerospace-grade finishes to structural aircraft panels in strict accordance with Boeing BAC process specifications. All deliverables must be processed and delivered as surface-treated aircraft panels. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place at Tinker AFB. To be eligible, contractors must maintain NADCAP accreditation and hold either ISO 9001 or AS9100 certification. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 11 hours ago

DEADLINE

Aerospace Surface Treatment and FinishingThis subcontract for Aerospace Surface Treatment and Finishing involves providing specialized plating and protective coatings for Support Assembly PY components, adhering strictly to Sikorsky P/N 70219-04200-049 specifications. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, the work requires the use of industrial anodizing and plating equipment to ensure all finished components meet rigorous aerospace standards for wear and corrosion resistance. The project is based in Tracy, California, and falls under NAICS code 332813. To be eligible, contractors must maintain ISO 9001:2015 certification and typically require NADCAP accreditation. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

Aerospace Coating and Finishing ServicesThis subcontract for Aerospace Coating and Finishing Services involves providing specialized protective coatings, anodizing, and painting for prime contractors supporting DLA Weapons Support ASC aerospace projects. The scope of work includes surface preparation, priming, and the application of chemical conversion coatings and anodizing in strict accordance with Boeing and MIL-SPEC standards. The primary deliverable consists of finished, coated pylon door components. To be eligible for this contract, providers must maintain NADCAP accreditation for chemical processing. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, with the place of performance located in Jacksonville, Florida. Interested parties must adhere to the response deadline of October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 11 hours ago

DEADLINE

Specialized Finishing for Tie-Down SpringsThis subcontract involves providing specialized surface treatment and finishing services for tie-down springs on projects for the DLA Weapons Support ASC. The contractor is responsible for applying a Type II Class 2 finish using chemical plating and curing equipment in strict accordance with SAE AMS-02-P-416 standards. To be eligible, the provider must hold the necessary certifications to perform these specific standards and deliver finished components with verified coatings. The work is performed under NAICS code 332813 for the Department of Defense, specifically supporting the DLA Weapons Support ASC Supplier OE and AF Division. Performance of the contract takes place at Hill AFB. Interested parties must respond by October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 11 hours ago

DEADLINE

Aerospace Surface Finishing and CoatingThe Aerospace Surface Finishing and Coating subcontract is issued by the Department of Defense under the DLA Weapons Support ASC Supplier OE and AF Division. This project involves providing specialized surface treatments, including plating, anodizing, and heat treating, for machined shafts used in DLA Weapons Support ASC projects. The contractor is responsible for applying protective coatings using industrial plating tanks and heat-treat ovens to ensure all components meet the corrosion resistance and hardness standards specified in the DLA Master List of Technical and Quality Requirements. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 332813, with the place of performance located at Hill AFB. Interested parties must submit their responses by October 23, 2026. The final deliverable for this contract is the provision of finished shafts that have undergone the required surface treatment processes.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 11 hours ago

DEADLINE

Aerospace Component Heat Treating and Surface FinishingThis subcontract, titled Aerospace Component Heat Treating and Surface Finishing, involves providing specialized metallurgical treatments for prime contractors supporting the DLA Weapons Support ASC Supplier Oper OEM Division. The scope of work includes precision grinding, case hardening, and heat treating of gear components and blanks to ensure they meet rigorous aerospace durability standards. Performance of these services will take place in Cherry Point, North Carolina. To be eligible for this contract, providers must maintain NADCAP accreditation and possess the necessary capabilities to handle Covered Defense Information. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026. The project falls under NAICS code 332813 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 11 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Supply of Data Entry Joysticks (NSN 5895-01-568-1533)This subcontract involves the supply of 18 data entry joysticks, specifically HurleyIR part number RP-M1-DACP, to support prime contractors delivering for the DLA Weapons Support ASC. The contractor is responsible for manufacturing or sourcing the units and ensuring strict adherence to quality assurance sampling standards per MIL-STD-1916 or ASQ H1331. Additionally, all items must be marked according to RQ017 and packaged in compliance with ASTM D3951 and MIL-STD-129. The agreement requires full compliance with DLA RA001 and RC001 requirements. The project falls under NAICS code 334290 and is managed by the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div. Performance of the contract is centered in New Cumberland, Pennsylvania.

Other Communications Equipment Manufacturing

POSTED

about 11 hours ago

DEADLINE

MIL-SPEC Packaging and Freight Forwarding ServicesThis subcontract for MIL-SPEC Packaging and Freight Forwarding Services involves providing specialized military packaging, marking, and shipping for 165 precision components. The work must be performed in strict accordance with MIL-STD-2073-1E, MIL-STD-129, and DLA requirement RP001, specifically utilizing preservation method 33 and wrap material GCH. The project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div. The scope includes coordinating FOB Origin shipment to the freight forwarder A.J. Worldwide Services for final delivery to Kayseri, Turkey. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026, under NAICS code 488510.

Freight Transportation Arrangement

POSTED

about 11 hours ago

DEADLINE

Precision Machining and Fabrication of Load Balls (PN 191B36-5)This subcontract involves the precision machining and fabrication of 165 Load Balls for screwjacks, identified as part number 191B36-5 and NSN 1680000896121. The project is managed under the Department of Defense for the DLA Weapons Support ASC Supplier Oper AE and AF Div. The selected provider must utilize CNC machining and grinding equipment to ensure all units meet strict tolerances and comply with the Buy American Act and Berry Amendment regarding material sourcing. Quality assurance is a critical component of the contract, requiring adherence to SAE AS9003 or ISO 9001 inspection standards. Additionally, the manufacturer must implement zero-based sampling in accordance with MIL-STD-1916 or ASQ H1331. The final deliverable consists of 165 finished units intended for prime contractors fulfilling DLA supply contracts.

POSTED

about 11 hours ago

DEADLINE

Back Fairing (NSN 1680-99-737-6673) SupplyThis subcontract involves the supply of three Back Fairings, identified by NSN 1680-99-737-6673, for prime contractors supporting DLA Aviation life support items. The selected provider must manufacture or source the items according to specific technical data, with a strict prohibition on additive manufacturing. Compliance requirements include bare item marking per RQ017 and the implementation of zero-based sampling following MIL-STD-1916 or ASQ H1331 standards. The contractor is responsible for packaging the fairings in accordance with ASTM D3951 and MIL-STD-129. To be eligible, the supplier must be an approved source of supply or an authorized dealer. This requirement is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with the place of performance located at Robins Air Force Base.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 11 hours ago

DEADLINE

Supply of Incandescent Lamps (MS25231-313R)This subcontract involves the supply of 1,429 mercury-free incandescent lamps, specifically NSN 6240001557919 and Part Number MS25231-313R, for prime contractors supporting the Department of Defense DLA Weapons Support ASC. The lamps must be manufactured or sourced in strict accordance with SAE aeronautical specification AS25050 and marked as 313R. Performance of this contract will take place in Greensboro, North Carolina. To ensure operational standards, the provider must maintain quality control systems compliant with either SAE AS9003 or ISO 9001. Additionally, all deliverables must adhere to MIL-STD-2073-1E and MIL-STD-129 packaging standards. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026, under NAICS code 335139.

Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

about 11 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract involves providing military-grade packaging and marking services for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires the packaging of components in strict accordance with MIL-STD-2073-1E and the marking of shipments per MIL-STD-129 and RP001. Specific technical requirements include the application of packaging data QUP 001 and Pres Mthd 10 to ensure all materials meet Department of Defense standards. The primary objective is the delivery of a shipment-ready actuator to the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania. This effort falls under NAICS code 488510 and is managed by the DLA Weapons Support ASC Supplier Oper AE and AF Div. The response deadline for this opportunity is October 23, 2026.

Freight Transportation Arrangement

POSTED

about 11 hours ago

DEADLINE

Electro-Mechanical Linear Actuator FabricationThis subcontract involves the fabrication and assembly of one Electro-Mechanical Linear Actuator for prime contractors supporting DLA Weapons Support ASC projects. The work must be performed in accordance with Reference Drawing NR 19207 57K9190 and TDP Rev A Gen 1, with a strict prohibition on the use of additive manufacturing. The final deliverable is one fully assembled and tested actuator. The Department of Defense requires the performing contractor to maintain ISO 9001:2015 certification and a CMMC Level 2 self-assessment. The project is categorized under NAICS code 334419 and will be executed in New Cumberland. Interested parties must respond by October 23, 2026.

Other Electronic Component Manufacturing

POSTED

about 11 hours ago

DEADLINE

Machine Thread Plug Supplier (NSN 5365010857814)This subcontract involves the manufacture or procurement of 106 machine thread plugs, identified by NSN 5365010857814, to support prime contractors for the DLA Weapons Support ASC. The project requires precision machining and strict adherence to quality control standards, specifically requiring sampling and inspection per MIL-STD-1916 or ASQ H1331. All deliverables must be packaged, marked, and palletized according to MIL-STD-2073-1E, MIL-STD-129, and RP001 standards. The contract is issued by the Department of Defense under NAICS code 332722, with performance taking place in Phoenix, Arizona. The supplier must ensure full compliance with the Buy American Act and deliver the 106 units FOB Origin. Interested parties must respond by October 23, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 11 hours ago

DEADLINE

Supply of Aerospace/Defense Grade Plate StockThis subcontract involves the supply of aerospace and defense grade raw metal plate stock for prime contractors working on DLA Weapons Support ASC projects. The provider is responsible for sourcing materials that strictly adhere to the Buy American Act and Berry Amendment as outlined in TDP Rev A Gen. To ensure quality and compliance, the supplier must provide Material Test Reports and Certificates of Conformance upon delivering the certified raw material stock to the manufacturer. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, the contract falls under NAICS code 331210. Performance for this requirement is centered in New Cumberland, Pennsylvania. Interested parties should note the response deadline of October 23, 2026, for this specific procurement action.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 11 hours ago

DEADLINE

Manufacturing of Plate, Element Support (NSN 2915-00-877-0142)This subcontract involves the precision machining and fabrication of 13 Element Support Plates under NSN 2915-00-877-0142 for the DLA Weapons Support ASC. The contractor must adhere to TDP Rev A Gen specifications and utilize ISO 9001:2015 quality systems and MIL-STD-1916 sampling to ensure production standards are met. Strict regulatory compliance is required, including CMMC Level 2 certification and adherence to the Berry Amendment. Finished units must be inspected and packaged according to MIL-STD-2073-1E for delivery to DLA Distribution DDSP New Cumberland. The project falls under NAICS code 332710 and is managed by the Department of Defense.

POSTED

about 11 hours ago

DEADLINE

Electrical Insulation Sleeving SupplyThis subcontract involves the supply of 2,084 feet of electrical insulation sleeving to prime contractors supporting the Department of Defense DLA Weapons Support ASC Supplier Oper AE and AF Div. The materials must be manufactured or sourced in accordance with SAE AS23053C and SAE AS23053/5 standards, delivered on reels or spools, and must maintain a minimum shelf life of 60 months. Performance will take place in Tracy, California, under NAICS code 335931. Strict adherence to federal guidelines is required, including packaging and marking per MIL-STD-2073-1E and MIL-STD-129. The supplier must ensure compliance with DFARS 252.204-7012 and provide hazardous material labeling as mandated by 29 CFR 1910.1200. The response deadline for this opportunity is October 23, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

about 11 hours ago

DEADLINE

Fabrication of Panel Housings/FramesThis subcontract involves the fabrication of 35 physical panel housings and frames for prime contractors supporting DLA Weapons Support ASC projects. The scope of work includes precision machining, molding, and the cutting of apertures for mounting hardware and light indicators. Additionally, the contractor is responsible for applying specific finishes and coatings in accordance with the technical data provided for NSN 6220010310292. The project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place at Tinker AFB. The contract falls under NAICS code 332710, and interested parties must adhere to the response deadline of October 23, 2026.

POSTED

about 11 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS