Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Surface Treatment and Finishing for Check Fill Unit

Active

Federal

Response Deadline10/23/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, involves providing specialized surface treatment and finishing for Check Fill Unit hardware. The selected contractor will be responsible for applying powder coating, plating, or anodizing to components in strict accordance with Basic Drawing NR 78286 S1670-15000. All work must ensure that adhesion and finish thickness comply with MIL-SPEC requirements, and the contractor is tasked with the safe management of hazardous materials following all applicable environmental regulations. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332813, with performance taking place in New Cumberland. Interested parties must respond by October 23, 2026. The primary objective of the engagement is the successful delivery of finished and coated components that meet the rigorous technical standards required for prime contractor hardware projects.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

NAICS

332813 - Electroplating, Plating, Polishing, Anodizing, and Coloring

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

SBA

Documents

This scope was carved out of SPE4A5-27-T-1228.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CHECK FILL UNIT

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 15

subcontract

Response DeadlineOct 23

Submission deadline

Response Deadline

10/23/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs surface treatments for prime contractors on DLA Weapons Support ASC hardware projects. Applies anodizing, plating, or powder coating to components per Basic Drawing NR 78286 S1670-15000. Ensures finish thickness and adhesion meet MIL-SPEC requirements. Manages hazardous materials per environmental regulations. Delivers finished and coated components.

Similar Contracts

Same NAICS industry code

Oxygen System Cleaning and Inspection ServicesThis subcontract for Oxygen System Cleaning and Inspection Services supports the Department of Defense through the DLA Weapons Support Fluid Handling Division. The selected provider will perform specialized cleaning and inspection of metal tube assemblies for prime contractors, ensuring that both interiors and exteriors are free of oils and particulates. All work must be performed in accordance with AF Drawing 8148650 for oxygen service, utilizing certified chemical degreasing systems or ultrasonic cleaners. The scope of work requires the delivery of certified oxygen-clean assemblies accompanied by detailed inspection reports. Performance will take place at Tinker AFB, zip code 73145-8000. The solicitation was posted on October 15, 2026, with a response deadline of October 26, 2026, falling under NAICS code 332813.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

Aerospace-Grade Surface Treatment and Coating for Fuel ValvesThis subcontract involves providing specialized surface treatments, plating, and anodizing for fuel system projects managed by the DLA Weapons Support ASC Supplier OEM Division. The contractor is responsible for applying coatings to valve components using chemical plating baths and anodizing tanks in strict accordance with TDP Rev A Gen 1 to ensure aerospace standards for wear and corrosion resistance are met. The work will be performed in Jacksonville, Florida, under NAICS code 332813. A critical requirement of the contract is the management of hazardous materials as mandated by FAR 52.223-7. Interested parties must respond by October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 8 hours ago

DEADLINE

Aerospace Surface Treatment and Non-Destructive TestingThis subcontract for Aerospace Surface Treatment and Non-Destructive Testing supports the Department of Defense through the DLA Weapons Support ASC Supplier OEM Division. The scope of work involves providing specialized coating, plating, and non-destructive testing for pylon mounts, ensuring all aerospace-grade finishes adhere to technical data packages and FED-STD-313 hazardous material standards. The contractor is responsible for utilizing NDT equipment to maintain critical quality assurance and delivering fully certified finished components. The project is categorized under NAICS code 332813 and will be performed in Cherry Point, North Carolina. Interested parties should note the posting date of October 15, 2026, with a response deadline set for October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 8 hours ago

DEADLINE

Aerospace Surface Treatment and CoatingThis subcontract for Aerospace Surface Treatment and Coating involves performing specialized surface treatments and coatings for prime contractors supporting DLA Weapons Support ASC projects. The scope of work focuses on applying chemical processing and aerospace-grade finishes to structural aircraft panels in strict accordance with Boeing BAC process specifications. All deliverables must be processed and delivered as surface-treated aircraft panels. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place at Tinker AFB. To be eligible, contractors must maintain NADCAP accreditation and hold either ISO 9001 or AS9100 certification. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

Aerospace Surface Treatment and FinishingThis subcontract for Aerospace Surface Treatment and Finishing involves providing specialized plating and protective coatings for Support Assembly PY components, adhering strictly to Sikorsky P/N 70219-04200-049 specifications. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, the work requires the use of industrial anodizing and plating equipment to ensure all finished components meet rigorous aerospace standards for wear and corrosion resistance. The project is based in Tracy, California, and falls under NAICS code 332813. To be eligible, contractors must maintain ISO 9001:2015 certification and typically require NADCAP accreditation. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

Aerospace Coating and Finishing ServicesThis subcontract for Aerospace Coating and Finishing Services involves providing specialized protective coatings, anodizing, and painting for prime contractors supporting DLA Weapons Support ASC aerospace projects. The scope of work includes surface preparation, priming, and the application of chemical conversion coatings and anodizing in strict accordance with Boeing and MIL-SPEC standards. The primary deliverable consists of finished, coated pylon door components. To be eligible for this contract, providers must maintain NADCAP accreditation for chemical processing. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, with the place of performance located in Jacksonville, Florida. Interested parties must adhere to the response deadline of October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 8 hours ago

DEADLINE

Specialized Finishing for Tie-Down SpringsThis subcontract involves providing specialized surface treatment and finishing services for tie-down springs on projects for the DLA Weapons Support ASC. The contractor is responsible for applying a Type II Class 2 finish using chemical plating and curing equipment in strict accordance with SAE AMS-02-P-416 standards. To be eligible, the provider must hold the necessary certifications to perform these specific standards and deliver finished components with verified coatings. The work is performed under NAICS code 332813 for the Department of Defense, specifically supporting the DLA Weapons Support ASC Supplier OE and AF Division. Performance of the contract takes place at Hill AFB. Interested parties must respond by October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

Aerospace Surface Finishing and Coating

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

Aerospace Component Heat Treating and Surface FinishingThis subcontract, titled Aerospace Component Heat Treating and Surface Finishing, involves providing specialized metallurgical treatments for prime contractors supporting the DLA Weapons Support ASC Supplier Oper OEM Division. The scope of work includes precision grinding, case hardening, and heat treating of gear components and blanks to ensure they meet rigorous aerospace durability standards. Performance of these services will take place in Cherry Point, North Carolina. To be eligible for this contract, providers must maintain NADCAP accreditation and possess the necessary capabilities to handle Covered Defense Information. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026. The project falls under NAICS code 332813 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 8 hours ago

DEADLINE

Aerospace Plating and Surface Treatment for Landing Gear HardwareThis subcontract opportunity is for the provision of specialized aerospace plating and surface treatments for landing gear hardware, supporting prime contractors on DLA Weapons Support ASC projects. The scope of work involves applying aerospace-grade coatings, including Cadmium, Zinc-Nickel, and Passivation, in accordance with TDP reference drawings using industrial plating tanks. The selected provider must be capable of verifying surface roughness and thickness to ensure all treated landing gear nuts meet strict technical specifications. The contract is designated as a Total Small Business Set-Aside under NAICS code 332813, with performance taking place at Robins Air Force Base. To be eligible, contractors must maintain ISO 9001:2015 certification and ensure full compliance with ITAR and EAR regulations. Responses to this solicitation are due by October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

Aerospace Surface Treatment and FinishingThis subcontract for Aerospace Surface Treatment and Finishing involves providing specialized surface treatments and coatings for aircraft component projects under the DLA Weapons Support ASC. The scope of work requires the application of aerospace-grade primers and anti-corrosion coatings to an aircraft door assembly, ensuring strict adherence to Boeing technical data packages and MIL-STD-2073-1E standards. Additionally, the contractor must provide all necessary Safety Data Sheets in compliance with 29 CFR 1910.1200(g). The project is managed by the Department of Defense through the DLA Weapons Support ASC Supplier OEM Division and falls under NAICS code 332813. Performance of the work will take place in New Cumberland, Pennsylvania. The solicitation was posted on October 15, 2026, with a response deadline set for October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 8 hours ago

DEADLINE

Industrial Coating and Painting for Fueling SpoolsThis subcontract, issued by the Department of Defense DLA Weapons Support Fluid Handling Division, requires the provision of surface preparation and industrial painting for fueling spools. The scope of work involves executing conventional sandblasting to near-white metal according to SPC-SP10 standards and applying a three-coat epoxy-polymide system using Formulas 150, 151, and 154 per MIL-P-24441A. Contractors must ensure a verified dry film thickness of 3 mils per coat. The project is designated as a Total Small Business Set-Aside under NAICS code 332813, with performance taking place in San Diego, California. Interested parties must respond by October 26, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

Supply of Dial Indicating Pressure GagesThis subcontract involves the procurement or manufacture of 82 specialized dial indicating pressure gages for prime contractors supporting DLA supply contracts. The required units must adhere to Thuemling Industrial Products Inc part number 4306148 and NSN 6685-01-506-1061. All items must be delivered FOB Origin to DLA Distribution facilities, with performance taking place in Barstow, California. Strict compliance with technical standards is required, including packaging and marking per MIL-STD-129, RP001, and ASTM D3951. Quality acceptance will be governed by MIL-STD-1916 or ASQ H1331. This opportunity is managed by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, with a response deadline of October 23, 2026.

Irradiation Apparatus Manufacturing

POSTED

about 8 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services involves providing military-grade packaging and marking for aerospace components destined for the DLA Weapons Support ASC. The scope of work requires strict adherence to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. To ensure the survival of components during transit, the contractor must utilize approved MIL-SPEC cushioning and preservative materials. The project specifically entails the packaging and palletization of three units for delivery to Tinker AFB. This requirement is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper OEM Division, with a response deadline of October 23, 2026.

Freight Transportation Arrangement

POSTED

about 8 hours ago

DEADLINE

Manufacturing of Control Wobbler ArmsThis subcontract involves the high-precision manufacturing of three control wobbler arms for the Department of Defense, specifically supporting DLA Weapons Support ASC contracts. The fabrication process requires the use of high-precision CNC machining to meet Hamilton Sundstrand P/N 717926 specifications. Performance of the contract takes place at Tinker AFB. To ensure mission success, the provider must adhere to Critical Application Item quality controls and maintain CMMC Level 2 standards for the secure handling of Covered Defense Information. The final deliverable consists of three finished, compliant control arms that meet all specified technical and security requirements.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

Supply of Cable Breakout Adapters (NSN 5935-01-668-9632)This subcontract involves the manufacture or sourcing of eight Cable Breakout Adapters, specifically GE Aviation Systems part number 765090-006 under NSN 5935-01-668-9632. The project is managed by the Department of Defense through the DLA Weapons Support ASC Supplier Oper OEM Division. All finished units must be delivered FOB Origin to the DLA Distribution Depot Oklahoma, with the place of performance located at Tinker AFB. To ensure compliance, the contractor must maintain an ISO 9001:2015 quality system and meet CMMC Level 2 security requirements. Additionally, all items must be packaged and marked in strict accordance with MIL-STD-2073-1E and MIL-STD-129 standards. The opportunity falls under NAICS code 334419.

Other Electronic Component Manufacturing

POSTED

about 8 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on DLA Weapons Support ASC projects at Hill AFB. The scope of work involves executing specialized packaging and marking for shipping containers, specifically adhering to MIL-STD-2073-1E, RP001, and MIL-STD-129. Key technical requirements include the application of Special Marking Code 06 for delicate instruments, the use of preservation method Pres Mthd+41, and the utilization of MIL-SPEC marking equipment and approved cushioning materials. The project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper OEM Division, falling under NAICS code 339999. The contract requires the delivery of fully packaged and marked containers that are ready for immediate transport. Interested parties should note the response deadline of October 23, 2026.

All Other Miscellaneous Manufacturing

POSTED

about 8 hours ago

DEADLINE

Power Transformer Supplier (Honeywell PN 51080031-1)This subcontract involves the procurement of 39 power transformers, specifically Honeywell Aerospace International Inc. part number 51080031-1, to support prime contractors on DLA Weapons Support ASC projects. The supplier is responsible for manufacturing or sourcing these components in strict accordance with the Buy American Act. All units must undergo verification via precision testing equipment to ensure power specifications are met, with a requirement for zero non-conformances based on MIL-STD-1916 or MIL-STD-105/ASQ Z1.4 standards. The contract is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division. The final delivery of the 39 transformers is designated as FOB Origin to Hill AFB, Utah. This opportunity falls under NAICS code 335999 and was posted on October 15, 2026, with a response deadline of October 23, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 8 hours ago

DEADLINE

Supply of Pressure and Differential Pressure IndicatorsThis subcontract, issued by the Department of Defense DLA Weapons Support ASC Supplier Oper OEM Division, involves the procurement of 383 pressure and differential pressure indicators. The contractor is responsible for manufacturing or sourcing Pall Aeropower Corporation part number RC914UH096, identified by NSN 6620010152391. All units must be delivered FOB Origin to Hill AFB, with strict adherence to MIL-STD-2073-1E and MIL-STD-129 for packaging and marking, and RP001 for palletization. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 334517. To be eligible, providers must maintain a quality management system compliant with SAE AS9003 or ISO 9001 and provide a CMMC Level 2 self-assessment. The response deadline for this requirement is October 23, 2026.

Irradiation Apparatus Manufacturing

POSTED

about 8 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services involves providing specialized military-grade packaging, marking, and palletization for prime contractors supporting the DLA Weapons Support ASC Supplier OEM Division. The scope of work focuses on the secure handling of fragile aircraft optical components, requiring strict adherence to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. The contractor must utilize MIL-SPEC marking equipment and approved cushioning and dunnage materials to ensure the integrity of the lenses. The final deliverables are to be securely packaged and marked for FOB Origin shipment to DLA Distribution Jacksonville, located in Jacksonville, Florida. This requirement falls under NAICS code 488510 and is managed by the Department of Defense. Interested parties should note the response deadline of October 23, 2026.

Freight Transportation Arrangement

POSTED

about 8 hours ago

DEADLINE

Aircraft Lens Fabrication (NSN 6220014741863)This subcontract involves the fabrication and delivery of 76 aircraft lenses for prime contractors supporting DLA Weapons Support ASC projects. The lenses must be manufactured according to NSN 6220014741863 technical specifications, utilizing precision grinding, polishing, and coating equipment. Performance is subject to Critical Application Item standards and the DLA Master List of Technical and Quality Requirements. The project requires strict adherence to MIL-STD-1916 or ASQ H1331 quality assurance standards and full compliance with the Buy American Act. Managed by the Department of Defense under NAICS code 336411, the work is to be performed in Jacksonville. The response deadline for this opportunity is October 23, 2026.

Aircraft Manufacturing

POSTED

about 8 hours ago

DEADLINE

Aerospace Component Packaging and ShippingThis subcontract for Aerospace Component Packaging and Shipping involves providing specialized packaging and marking services for prime contractors fulfilling DLA supply contracts. The scope of work requires packaging components according to ASTM D3951 and RP001 DLA standards, with all marking and labeling performed in compliance with MIL-STD-129. Additionally, the contractor is responsible for coordinating FOB Origin shipping for critical aviation components to ensure they are shipment-ready for DLA Distribution. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, the project is categorized under NAICS code 488510. Performance will take place in New Cumberland, Pennsylvania. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026.

Freight Transportation Arrangement

POSTED

about 8 hours ago

DEADLINE

Manufacture and Supply of Seal Sleeves (NSN 1615002008060)This subcontract involves the manufacture and supply of 29 precision-manufactured seal sleeves for prime contractors supporting DLA supply contracts. The parts must be produced according to Bell Textron P/N 204-012-107-001 and NSN 1615002008060 specifications, with quality assurance conducted under MIL-STD-1916 or ASQ H331 Zero-based sampling. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 336411 for the Department of Defense. The contractor is required to maintain CMMC Level 2 self-assessment and possess the necessary capabilities for handling Controlled Unclassified Information. The procurement is managed by the DLA Weapons Support ASC Supplier Oper OEM Division, with a response deadline set for October 23, 2026.

Aircraft Manufacturing

POSTED

about 8 hours ago

DEADLINE

Supply of Air Regulator Boots (NSN 5342006010748)This subcontract involves the manufacture or procurement of 42 air regulator boots, specifically Honeywell part number 110662-1 (NSN 5342006010748), for prime contractors supporting the Department of Defense DLA Weapons Support ASC Supplier OEM Division. The items must be delivered FOB Origin to Cherry Point and must strictly adhere to the Buy American Act and Berry Amendment. The contractor is required to maintain ISO 9001:2015 certification and ensure compliance with DFARS 252.204-7012. Quality control must be performed according to MIL-STD-1916 or ASQ H1331, with packaging meeting ASTM D3951 and MIL-STD-129 standards. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026.

All Other Miscellaneous Manufacturing

POSTED

about 8 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS