Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Aerospace Plating and Surface Treatment for Landing Gear Hardware

Active

Federal

Response Deadline10/23/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity is for the provision of specialized aerospace plating and surface treatments for landing gear hardware, supporting prime contractors on DLA Weapons Support ASC projects. The scope of work involves applying aerospace-grade coatings, including Cadmium, Zinc-Nickel, and Passivation, in accordance with TDP reference drawings using industrial plating tanks. The selected provider must be capable of verifying surface roughness and thickness to ensure all treated landing gear nuts meet strict technical specifications. The contract is designated as a Total Small Business Set-Aside under NAICS code 332813, with performance taking place at Robins Air Force Base. To be eligible, contractors must maintain ISO 9001:2015 certification and ensure full compliance with ITAR and EAR regulations. Responses to this solicitation are due by October 23, 2026.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

NAICS

332813 - Electroplating, Plating, Polishing, Anodizing, and Coloring

Place of Performance

ROBINS A F B, GA, 31098-1887, USA

Set-Aside

SBA

Documents

This scope was carved out of SPE4A7-27-T-1301.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

NUT, LANDING GEAR

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 15

subcontract

Response DeadlineOct 23

Submission deadline

Response Deadline

10/23/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs specialized surface treatments and plating for prime contractors on DLA Weapons Support ASC projects. Applies aerospace-grade coatings such as Cadmium, Zinc-Nickel, or Passivation per TDP reference drawings using industrial plating tanks. Verifies surface roughness and thickness. Requires ISO 9001:2015 and ITAR/EAR compliance. Delivers surface-treated landing gear nuts.

Similar Contracts

Same NAICS industry code

Oxygen System Cleaning and Inspection ServicesThis subcontract for Oxygen System Cleaning and Inspection Services supports the Department of Defense through the DLA Weapons Support Fluid Handling Division. The selected provider will perform specialized cleaning and inspection of metal tube assemblies for prime contractors, ensuring that both interiors and exteriors are free of oils and particulates. All work must be performed in accordance with AF Drawing 8148650 for oxygen service, utilizing certified chemical degreasing systems or ultrasonic cleaners. The scope of work requires the delivery of certified oxygen-clean assemblies accompanied by detailed inspection reports. Performance will take place at Tinker AFB, zip code 73145-8000. The solicitation was posted on October 15, 2026, with a response deadline of October 26, 2026, falling under NAICS code 332813.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

Surface Treatment and Finishing for Check Fill UnitThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, involves providing specialized surface treatment and finishing for Check Fill Unit hardware. The selected contractor will be responsible for applying powder coating, plating, or anodizing to components in strict accordance with Basic Drawing NR 78286 S1670-15000. All work must ensure that adhesion and finish thickness comply with MIL-SPEC requirements, and the contractor is tasked with the safe management of hazardous materials following all applicable environmental regulations. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332813, with performance taking place in New Cumberland. Interested parties must respond by October 23, 2026. The primary objective of the engagement is the successful delivery of finished and coated components that meet the rigorous technical standards required for prime contractor hardware projects.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 8 hours ago

DEADLINE

Aerospace-Grade Surface Treatment and Coating for Fuel ValvesThis subcontract involves providing specialized surface treatments, plating, and anodizing for fuel system projects managed by the DLA Weapons Support ASC Supplier OEM Division. The contractor is responsible for applying coatings to valve components using chemical plating baths and anodizing tanks in strict accordance with TDP Rev A Gen 1 to ensure aerospace standards for wear and corrosion resistance are met. The work will be performed in Jacksonville, Florida, under NAICS code 332813. A critical requirement of the contract is the management of hazardous materials as mandated by FAR 52.223-7. Interested parties must respond by October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 8 hours ago

DEADLINE

Aerospace Surface Treatment and Non-Destructive TestingThis subcontract for Aerospace Surface Treatment and Non-Destructive Testing supports the Department of Defense through the DLA Weapons Support ASC Supplier OEM Division. The scope of work involves providing specialized coating, plating, and non-destructive testing for pylon mounts, ensuring all aerospace-grade finishes adhere to technical data packages and FED-STD-313 hazardous material standards. The contractor is responsible for utilizing NDT equipment to maintain critical quality assurance and delivering fully certified finished components. The project is categorized under NAICS code 332813 and will be performed in Cherry Point, North Carolina. Interested parties should note the posting date of October 15, 2026, with a response deadline set for October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 8 hours ago

DEADLINE

Aerospace Surface Treatment and CoatingThis subcontract for Aerospace Surface Treatment and Coating involves performing specialized surface treatments and coatings for prime contractors supporting DLA Weapons Support ASC projects. The scope of work focuses on applying chemical processing and aerospace-grade finishes to structural aircraft panels in strict accordance with Boeing BAC process specifications. All deliverables must be processed and delivered as surface-treated aircraft panels. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place at Tinker AFB. To be eligible, contractors must maintain NADCAP accreditation and hold either ISO 9001 or AS9100 certification. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

Aerospace Surface Treatment and FinishingThis subcontract for Aerospace Surface Treatment and Finishing involves providing specialized plating and protective coatings for Support Assembly PY components, adhering strictly to Sikorsky P/N 70219-04200-049 specifications. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, the work requires the use of industrial anodizing and plating equipment to ensure all finished components meet rigorous aerospace standards for wear and corrosion resistance. The project is based in Tracy, California, and falls under NAICS code 332813. To be eligible, contractors must maintain ISO 9001:2015 certification and typically require NADCAP accreditation. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

Aerospace Coating and Finishing ServicesThis subcontract for Aerospace Coating and Finishing Services involves providing specialized protective coatings, anodizing, and painting for prime contractors supporting DLA Weapons Support ASC aerospace projects. The scope of work includes surface preparation, priming, and the application of chemical conversion coatings and anodizing in strict accordance with Boeing and MIL-SPEC standards. The primary deliverable consists of finished, coated pylon door components. To be eligible for this contract, providers must maintain NADCAP accreditation for chemical processing. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, with the place of performance located in Jacksonville, Florida. Interested parties must adhere to the response deadline of October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 8 hours ago

DEADLINE

Specialized Finishing for Tie-Down SpringsThis subcontract involves providing specialized surface treatment and finishing services for tie-down springs on projects for the DLA Weapons Support ASC. The contractor is responsible for applying a Type II Class 2 finish using chemical plating and curing equipment in strict accordance with SAE AMS-02-P-416 standards. To be eligible, the provider must hold the necessary certifications to perform these specific standards and deliver finished components with verified coatings. The work is performed under NAICS code 332813 for the Department of Defense, specifically supporting the DLA Weapons Support ASC Supplier OE and AF Division. Performance of the contract takes place at Hill AFB. Interested parties must respond by October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

Aerospace Surface Finishing and Coating

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

Aerospace Component Heat Treating and Surface FinishingThis subcontract, titled Aerospace Component Heat Treating and Surface Finishing, involves providing specialized metallurgical treatments for prime contractors supporting the DLA Weapons Support ASC Supplier Oper OEM Division. The scope of work includes precision grinding, case hardening, and heat treating of gear components and blanks to ensure they meet rigorous aerospace durability standards. Performance of these services will take place in Cherry Point, North Carolina. To be eligible for this contract, providers must maintain NADCAP accreditation and possess the necessary capabilities to handle Covered Defense Information. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026. The project falls under NAICS code 332813 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 8 hours ago

DEADLINE

Aerospace Surface Treatment and FinishingThis subcontract for Aerospace Surface Treatment and Finishing involves providing specialized surface treatments and coatings for aircraft component projects under the DLA Weapons Support ASC. The scope of work requires the application of aerospace-grade primers and anti-corrosion coatings to an aircraft door assembly, ensuring strict adherence to Boeing technical data packages and MIL-STD-2073-1E standards. Additionally, the contractor must provide all necessary Safety Data Sheets in compliance with 29 CFR 1910.1200(g). The project is managed by the Department of Defense through the DLA Weapons Support ASC Supplier OEM Division and falls under NAICS code 332813. Performance of the work will take place in New Cumberland, Pennsylvania. The solicitation was posted on October 15, 2026, with a response deadline set for October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 8 hours ago

DEADLINE

Industrial Coating and Painting for Fueling SpoolsThis subcontract, issued by the Department of Defense DLA Weapons Support Fluid Handling Division, requires the provision of surface preparation and industrial painting for fueling spools. The scope of work involves executing conventional sandblasting to near-white metal according to SPC-SP10 standards and applying a three-coat epoxy-polymide system using Formulas 150, 151, and 154 per MIL-P-24441A. Contractors must ensure a verified dry film thickness of 3 mils per coat. The project is designated as a Total Small Business Set-Aside under NAICS code 332813, with performance taking place in San Diego, California. Interested parties must respond by October 26, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Supply of Data Entry Joysticks (NSN 5895-01-568-1533)This subcontract involves the supply of 18 data entry joysticks, specifically HurleyIR part number RP-M1-DACP, to support prime contractors delivering for the DLA Weapons Support ASC. The contractor is responsible for manufacturing or sourcing the units and ensuring strict adherence to quality assurance sampling standards per MIL-STD-1916 or ASQ H1331. Additionally, all items must be marked according to RQ017 and packaged in compliance with ASTM D3951 and MIL-STD-129. The agreement requires full compliance with DLA RA001 and RC001 requirements. The project falls under NAICS code 334290 and is managed by the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div. Performance of the contract is centered in New Cumberland, Pennsylvania.

Other Communications Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

Back Fairing (NSN 1680-99-737-6673) SupplyThis subcontract involves the supply of three Back Fairings, identified by NSN 1680-99-737-6673, for prime contractors supporting DLA Aviation life support items. The selected provider must manufacture or source the items according to specific technical data, with a strict prohibition on additive manufacturing. Compliance requirements include bare item marking per RQ017 and the implementation of zero-based sampling following MIL-STD-1916 or ASQ H1331 standards. The contractor is responsible for packaging the fairings in accordance with ASTM D3951 and MIL-STD-129. To be eligible, the supplier must be an approved source of supply or an authorized dealer. This requirement is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with the place of performance located at Robins Air Force Base.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract involves providing military-grade packaging and marking services for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires the packaging of components in strict accordance with MIL-STD-2073-1E and the marking of shipments per MIL-STD-129 and RP001. Specific technical requirements include the application of packaging data QUP 001 and Pres Mthd 10 to ensure all materials meet Department of Defense standards. The primary objective is the delivery of a shipment-ready actuator to the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania. This effort falls under NAICS code 488510 and is managed by the DLA Weapons Support ASC Supplier Oper AE and AF Div. The response deadline for this opportunity is October 23, 2026.

Freight Transportation Arrangement

POSTED

about 8 hours ago

DEADLINE

Electro-Mechanical Linear Actuator FabricationThis subcontract involves the fabrication and assembly of one Electro-Mechanical Linear Actuator for prime contractors supporting DLA Weapons Support ASC projects. The work must be performed in accordance with Reference Drawing NR 19207 57K9190 and TDP Rev A Gen 1, with a strict prohibition on the use of additive manufacturing. The final deliverable is one fully assembled and tested actuator. The Department of Defense requires the performing contractor to maintain ISO 9001:2015 certification and a CMMC Level 2 self-assessment. The project is categorized under NAICS code 334419 and will be executed in New Cumberland. Interested parties must respond by October 23, 2026.

Other Electronic Component Manufacturing

POSTED

about 8 hours ago

DEADLINE

Machine Thread Plug Supplier (NSN 5365010857814)This subcontract involves the manufacture or procurement of 106 machine thread plugs, identified by NSN 5365010857814, to support prime contractors for the DLA Weapons Support ASC. The project requires precision machining and strict adherence to quality control standards, specifically requiring sampling and inspection per MIL-STD-1916 or ASQ H1331. All deliverables must be packaged, marked, and palletized according to MIL-STD-2073-1E, MIL-STD-129, and RP001 standards. The contract is issued by the Department of Defense under NAICS code 332722, with performance taking place in Phoenix, Arizona. The supplier must ensure full compliance with the Buy American Act and deliver the 106 units FOB Origin. Interested parties must respond by October 23, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

Supply of Aerospace/Defense Grade Plate StockThis subcontract involves the supply of aerospace and defense grade raw metal plate stock for prime contractors working on DLA Weapons Support ASC projects. The provider is responsible for sourcing materials that strictly adhere to the Buy American Act and Berry Amendment as outlined in TDP Rev A Gen. To ensure quality and compliance, the supplier must provide Material Test Reports and Certificates of Conformance upon delivering the certified raw material stock to the manufacturer. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, the contract falls under NAICS code 331210. Performance for this requirement is centered in New Cumberland, Pennsylvania. Interested parties should note the response deadline of October 23, 2026, for this specific procurement action.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 8 hours ago

DEADLINE

Manufacturing of Plate, Element Support (NSN 2915-00-877-0142)This subcontract involves the precision machining and fabrication of 13 Element Support Plates under NSN 2915-00-877-0142 for the DLA Weapons Support ASC. The contractor must adhere to TDP Rev A Gen specifications and utilize ISO 9001:2015 quality systems and MIL-STD-1916 sampling to ensure production standards are met. Strict regulatory compliance is required, including CMMC Level 2 certification and adherence to the Berry Amendment. Finished units must be inspected and packaged according to MIL-STD-2073-1E for delivery to DLA Distribution DDSP New Cumberland. The project falls under NAICS code 332710 and is managed by the Department of Defense.

POSTED

about 8 hours ago

DEADLINE

Electrical Insulation Sleeving SupplyThis subcontract involves the supply of 2,084 feet of electrical insulation sleeving to prime contractors supporting the Department of Defense DLA Weapons Support ASC Supplier Oper AE and AF Div. The materials must be manufactured or sourced in accordance with SAE AS23053C and SAE AS23053/5 standards, delivered on reels or spools, and must maintain a minimum shelf life of 60 months. Performance will take place in Tracy, California, under NAICS code 335931. Strict adherence to federal guidelines is required, including packaging and marking per MIL-STD-2073-1E and MIL-STD-129. The supplier must ensure compliance with DFARS 252.204-7012 and provide hazardous material labeling as mandated by 29 CFR 1910.1200. The response deadline for this opportunity is October 23, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

Aircraft-Grade Textile SupplyThis HUBZone set-aside subcontract involves the supply of raw aircraft-grade textiles and sewing materials for prime contractors working on DLA Weapons Support ASC projects. The materials must strictly adhere to the technical specifications for NSN 1680-99-733-2813 and be delivered with Certificates of Conformance. Performance for this contract takes place at Robins Air Force Base. The supplier is required to certify that all materials are of domestic origin in compliance with the Berry Amendment and the Buy American Act. Additionally, the provider must furnish Safety Data Sheets as mandated by FAR 52.223-3. This procurement falls under NAICS code 313210 and is managed by the Department of Defense.

Broadwoven Fabric Mills

POSTED

about 8 hours ago

DEADLINE

Aircraft Seat Cushion Cover FabricationThis HUBZone set-aside subcontract involves the fabrication of 38 aircraft seat cushion covers for the Department of Defense, specifically supporting the DLA Weapons Support ASC. The contractor is required to manufacture the covers according to NSN 1680-99-733-2813 using non-additive manufacturing processes. All work must strictly adhere to the Berry Amendment and the Buy American Act to ensure domestic sourcing compliance. Quality control must be performed in accordance with MIL-STD-1916 or ASQ H1331, with final products packaged according to ASTM D3951 and MIL-STD-129 standards. The place of performance is located at Robins Air Force Base. Interested parties must respond by October 23, 2026, under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

Aerospace Parts Kit Assembly and PackagingThis subcontract, titled Aerospace Parts Kit Assembly and Packaging, involves the assembly and kitting of 31 Actuator Overhaul Parts Kits for prime contractors supporting DLA aviation supply contracts. The work must be performed at Hill AFB and adheres to strict technical specifications, including assembly per Document 51161 Revision E or F, bare item marking per RQ017, and packaging requirements according to ASTM D3951 and RP001. The contract is designated as a Total Small Business Set-Aside under NAICS code 339999 for the Department of Defense. To be eligible and compliant, the provider must maintain CMMC Level 2 certification and ensure all deliverables meet MIL-STD-129 marking standards. All completed kits must be properly labeled and packaged prior to delivery.

All Other Miscellaneous Manufacturing

POSTED

about 8 hours ago

DEADLINE

Precision Component Manufacturing for Actuator Overhaul KitThis subcontract involves the precision machining of hardware components for actuator overhaul kits to support DLA aviation supply contracts. The manufacturer is responsible for fabricating individual parts in strict accordance with Drawing No. 9776003 and Meggitt North Hollywood Inc. Document 51161 Revision E or F. All deliverables must adhere to zero-nonconformance criteria as specified by MIL-STD-1916. The opportunity is a total small business set-aside under NAICS code 336413, managed by the Department of Defense DLA Weapons Support ASC. To be eligible, contractors must maintain ISO 9001:2015 certification and ensure full compliance with DFARS 252.204-7012. Performance for this contract will take place at Hill AFB.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS