Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Aerospace Component Finishing and Surface Treatment

Active

Federal

Response Deadline10/30/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Aerospace Component Finishing and Surface Treatment subcontract involves providing specialized surface treatments and heat treating for prime contractors supporting DLA Weapons Support ASC projects. The scope of work focuses on applying aerospace-grade coatings, plating, and heat treatment to gear teeth to ensure hardness and durability in accordance with Boeing P/N 9-48743 specifications. The final deliverables consist of finished and coated gear components. This project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, with performance taking place at Hill AFB. Due to the nature of the technical data handling involved, contractors are required to maintain CMMC Level 2 certification. The opportunity was posted on October 22, 2026, with a response deadline of October 30, 2026, falling under NAICS code 332813.

General Info

Aerospace surface treatment and heat treating for DLA gear components at Hill AFB.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

NAICS

332813 - Electroplating, Plating, Polishing, Anodizing, and Coloring

Place of Performance

HILL AFB, UT, 84056-5734, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A5-27-T-1611.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

GEAR, BEVEL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 22

subcontract

Response DeadlineOct 30

Submission deadline

Response Deadline

10/30/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs specialized surface treatments and heat treating for prime contractors on DLA Weapons Support ASC projects. Applies aerospace-grade coatings, plating, and heat treatment to achieve hardness and durability for gear teeth per Boeing P/N 9-48743 specifications. Requires CMMC Level 2 for technical data handling. Delivers finished and coated gear components.

Similar Contracts

Same NAICS industry code

Cadmium Plating and Chromate FinishingThis subcontract involves providing specialized chemical plating and finishing services for the DLA Weapons Support ASC Commodities Division. The scope of work requires the application of a cadmium plated chromate finish to 500 steel pins, ensuring that all thickness and adhesion standards strictly adhere to NASM20392 and NASM5673 technical data packages. To achieve this, the contractor must utilize cadmium plating baths and chromate conversion tanks, incorporating rigorous chemical testing to verify thickness before the final delivery of the 500 finished pins. The project is categorized under NAICS code 332813 and will be performed at Robins Air Force Base. Interested parties should note that the solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Aerospace Plating and Anodizing ServicesThis subcontract for Aerospace Plating and Anodizing Services supports prime contractors on DLA Weapons Support ASC missile projects. The scope of work involves providing surface treatments for mounting plates, specifically requiring electrodeposited cadmium plating according to SAE AMS-QQ-P-416 Type II/Class 3 and anodic coatings per MIL-A-8625, with cleaning performed under TT-C-490 Method I or VI. The project is managed under the Department of Defense and requires strict adherence to CMMC Level 2 and ITAR/EAR compliance standards. Performance will take place in New Cumberland, Pennsylvania, with a response deadline set for October 30, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Industrial Coating and Surface TreatmentThis subcontract opportunity involves providing specialized surface treatments, plating, and coatings for machined sheave components supporting DLA Troop Support projects. The selected contractor will utilize industrial plating or powder coating equipment to apply finishes according to technical drawings, ensuring all components are delivered ready for assembly. A critical requirement of the performance is strict adherence to DFARS 252.223-7008, which prohibits the use of Hexavalent Chromium. The project is issued by the Department of Defense under NAICS code 332813 and is designated as a Total Small Business Set-Aside. Performance will take place in Tracy, California. Interested parties must submit their responses by November 2, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 10 hours ago

DEADLINE

Passivation of CRES 304 Aerospace FittingsThis subcontract involves the chemical passivation of 108 CRES 304 tube reducer unions for the Department of Defense under the DLA Weapons Support Fluid Handling Division. The selected contractor will utilize industrial chemical baths to remove free iron and contaminants from the stainless steel surfaces, ensuring all work adheres to strict aerospace standards for 300 series stainless steel. The project requires the contractor to hold aerospace-grade chemical processing certifications to ensure compliance and quality. Performance will take place in Cherry Point, and the final deliverable consists of 108 fully passivated tube reducer unions.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 10 hours ago

DEADLINE

Phosphate/Manganese Coating ServicesThis subcontract for Phosphate/Manganese Coating Services involves providing specialized surface treatments for steel accelerators to support prime contractors delivering DLA supply contracts. The scope of work requires the application of manganese coating over zinc options in strict accordance with military specifications. Performance will take place in Albany, Georgia, under the oversight of the Department of Defense, specifically the DLA Weapons Support Land Supplier Operations Vehicle Support. The contractor must ensure full compliance with DFARS 252.223-7008 regarding the use of hexavalent chromium and adhere to all ITAR and EAR regulations governing defense articles. This effort falls under NAICS code 332813 and focuses on the delivery of high-specification coated steel components. Interested parties must respond by November 2, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 10 hours ago

DEADLINE

Chemical Agent Resistant Coating (CARC) and Phosphate FinishingThis subcontract involves providing specialized surface treatment and coating services for prime contractors supporting DLA Weapons Support Land projects. The scope of work focuses on the application of Chemical Agent Resistant Coatings in accordance with DCSD Drawing 16236 CS-2300-0001 and phosphate coatings meeting RQ036 requirements, specifically for the delivery of brackets with military-grade finishes. To be eligible, providers must hold both JCP certification and RQ036 Phosphate Coating Supplier Certification. The project is managed under the Department of Defense through the DLA Weapons Support Land Supplier Operations Vehicle Support agency, with performance taking place in New Cumberland. The response deadline for this opportunity is November 2, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 10 hours ago

DEADLINE

Aerospace-Grade Finishing and Coating ServicesThis subcontract for Aerospace-Grade Finishing and Coating Services involves performing specialized surface treatments for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires the application of finishes to aerospace components in strict accordance with the DLA Master List of Technical and Quality Requirements, engineering notes in document 200415485, and Reference Drawing NR 98897. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332813 for the Department of Defense. Due to the nature of the aerospace components, the contractor must maintain full ITAR and EAR compliance. The final deliverable consists of finished, coated aerospace components meeting all specified technical standards.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 10 hours ago

DEADLINE

Specialized Metal Finishing and CoatingThis subcontract for Specialized Metal Finishing and Coating supports the DLA Weapons Support Land Supply Chain by providing protective and decorative finishes for Bell Crank components. The contractor is responsible for applying coatings in strict accordance with STP58-405, STP59-201, STP59-301, and STP51-400 standards, utilizing specific materials including LS3859 I/L/0 LS35085 and STP51-400 I/L/0 DS30003. All work must adhere to prohibitions regarding ozone-depleting chemicals and meet all cited technical specifications. The project is managed under NAICS code 332813 and will be performed at Robins Air Force Base. Interested parties must submit their responses by November 2, 2026. This effort is designed for prime contractors to ensure the durability and specification compliance of critical defense components.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

Aerospace Component Coating ServicesThis subcontract for Aerospace Component Coating Services involves the supply and application of specialized protective coatings to machined gas chambers for prime contractors under DLA supply contracts. The scope of work requires applying these coatings to assembled units utilizing chemical treatment tanks or industrial coating booths, ensuring all processes strictly adhere to military specifications and the provided technical data package. Managed by the Department of Defense through DLA Dist San Joaquin, the performance of this contract will take place in Tracy, California. The opportunity was posted on October 22, 2026, with a response deadline of November 2, 2026, falling under NAICS code 332813 for the delivery of completed coated gas chamber assemblies.

DLA DIST SAN JOAQUIN

POSTED

about 10 hours ago

DEADLINE

Industrial Wear Coating ServicesThis subcontract for Industrial Wear Coating Services involves the application of specialized wear coatings to four 12-inch gate valves for prime contractors supporting Defense Logistics Agency supply contracts. The scope of work includes surface preparation and coating application in strict accordance with the technical data package, with a specific prohibition on the use of Class I Ozone Depleting Chemicals. Performance will take place in Norfolk, Virginia. The contract is designated as a Total Small Business Set-Aside under NAICS code 332813. To ensure quality and security, the provider must maintain ISO 9001 or AS9003 quality standards and strictly comply with ITAR and EAR export control regulations. Responses to this solicitation are due by November 2, 2026.

Defense Logistics Agency

POSTED

about 10 hours ago

DEADLINE

Aerospace Surface Treatment and FinishingThis subcontract for Aerospace Surface Treatment and Finishing involves applying protective coatings for prime contractors on DLA Weapons Support ASC projects. The scope of work focuses on performing chemical conversion coating, anodizing, or specialized aerospace plating for Case Assemblies under part number 94937-2, utilizing chemical baths, plating tanks, and curing ovens. The project is managed by the Department of Defense through the DLA Weapons Support ASC Supplier OEM Division, with performance taking place at Tinker AFB. To qualify, contractors must maintain ISO 9001:2015 certification and ensure full compliance with aerospace surface finish standards. The response deadline for this opportunity is October 30, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 10 hours ago

DEADLINE

Specialized Finishing/Coating for Defense FastenersThis subcontract opportunity involves providing specialized finishing and coating services for defense fasteners supporting the DLA Weapons Support ASC Commodities Division. The selected contractor will be responsible for performing heat treatment, plating, or corrosion-resistant coatings on bolts identified by NSN 5306-00-813-8527. All work must be executed according to specific technical data, with the contractor utilizing industrial plating baths or heat-treatment furnaces to test and certify coating hardness and thickness before delivering the finished products to the manufacturer. Performance will take place at Tinker AFB, and the contractor must maintain both ISO 9001 and JCP certifications to be eligible. This requirement falls under NAICS code 332813. Interested parties should note the response deadline of October 30, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

MIL-SPEC Packaging and Marking for Electronic ComponentsThis subcontract involves providing specialized preservation, packaging, and marking services for electronic components to support prime contractors on DLA Weapons Support projects. The scope of work requires the processing of 11 units of switches, ensuring all deliverables are prepared for government shipment. All activities must strictly adhere to military specifications, specifically utilizing MIL-DTL-28786 for preservation and materials, MIL-STD-2073-1E for packaging data, and MIL-STD-129 for marking and equipment standards. The project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper OEM Division, with the place of performance located at Robins Air Force Base. Interested parties should note the response deadline of October 30, 2026, for this requirement categorized under NAICS code 488510.

Freight Transportation Arrangement

POSTED

about 10 hours ago

DEADLINE

Supply of Toggle Switches (NSN 5930-01-333-6531)This subcontract involves the supply of 11 toggle switches, identified by NSN 5930-01-333-6531, for prime contractors supporting DLA Weapons Support projects. The contractor is responsible for manufacturing or sourcing Boeing part numbers DAA3272A015 through DAA3272A017, ensuring all units meet Critical Application Item quality standards and adhere to Buy American Act domestic material restrictions. The agreement requires strict compliance with FAR and DFARS cybersecurity clauses to maintain security standards. Performance for this contract will take place at Robins Air Force Base, under the oversight of the Department of Defense DLA Weapons Support ASC Supplier Oper OEM Division.

Other Electronic Component Manufacturing

POSTED

about 10 hours ago

DEADLINE

Manufacture and Supply of Retaining Ring Tools (NSN 4920-01-633-8742)This subcontract involves the manufacture and supply of 15 retaining ring tools meeting NSN 4920-01-633-8742 specifications for the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper OEM Division. The contractor is responsible for ensuring all units are mercury-free per IP056 and undergo quality assurance testing according to MIL-STD-1916 or ASQ H1331. Final products must be packaged in accordance with MIL-STD-2073-1E and delivered to DLA Distribution DDSP in New Cumberland, Pennsylvania. Administrative requirements for this engagement include a mandatory CMMC Level 2 self-assessment. The project falls under NAICS code 333249, with a response deadline set for October 30, 2026.

Other Industrial Machinery Manufacturing

POSTED

about 10 hours ago

DEADLINE

MIL-SPEC Aerospace Packaging ServicesThis subcontract for MIL-SPEC Aerospace Packaging Services involves providing specialized packaging for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires sealing aircraft components in medium-duty, waterproof, greaseproof, and opaque bags in strict accordance with MIL-DTL-117, Type II, Class C, Style 1. Additionally, the contractor must execute all marking, labeling, and general preparation according to MIL-STD-129 and MIL-STD-2073-1E standards, while maintaining a thorough knowledge of DLA RP001 requirements. The project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper OEM Division. All completed and packaged seals must be delivered ready for shipment to the DDSP in New Cumberland, Pennsylvania. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026, falling under NAICS code 488510.

Freight Transportation Arrangement

POSTED

about 10 hours ago

DEADLINE

Aircraft Seal Fabrication (NSN 5330-01-566-3414)This subcontract involves the fabrication of two high-precision aircraft seals for the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division. The manufacturer must produce the seals according to Boeing PN 901-330-210-135 and TDP Rev A Gen 5 specifications, with a strict requirement that no hexavalent chromium be used during the process. Quality control must be conducted following MIL-STD-1916 zero-based sampling plans to ensure adherence to rigorous aerospace standards. To be eligible, the contractor must hold ISO 9001:2015 or SAE AS9003 certification and maintain CMMC Level 2 compliance. The work is associated with NAICS code 3399991 and will be performed in New Cumberland. Interested parties must respond by October 30, 2026.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 10 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves the specialized packaging, marking, and palletization of 24 individually packaged gages. All activities must adhere to strict military standards, specifically MIL-STD-2073-1E for packaging, MIL-STD-129 for markings, and RP001 for palletization. Special Marking Code 05 is required for delicate instruments, and the contractor must utilize MIL-SPEC approved cushioning and mercury-free preservation methods. The project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier OEM Division. Performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of October 30, 2026, for this requirement categorized under NAICS code 488410.

Motor Vehicle Towing

POSTED

about 10 hours ago

DEADLINE

Manufacturer of Dial Indicating Compound Pressure-Vacuum GagesThis subcontract involves the manufacture and supply of 24 dial indicating compound pressure-vacuum gages for prime contractors supporting DLA Weapons Support ASC projects. The gages must be produced in accordance with MIL-G-18997E(2) Revision E and meet the specifications for NSN 6685014727061. The selected provider is responsible for performing First Article Testing and submitting the resulting reports to the Naval Surface Warfare Center Philadelphia Division. To qualify, the manufacturer must maintain a quality management system compliant with SAE AS9003 or ISO 9001 and adhere to DFARS 252.204-7012 regulations. The project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier OEM Division, with performance taking place in New Cumberland. Final deliverables include the 24 finished gages and all required testing documentation.

Irradiation Apparatus Manufacturing

POSTED

about 10 hours ago

DEADLINE

MIL-SPEC Packaging and Preservation ServicesThis subcontract for the Department of Defense, specifically the DLA Weapons Support ASC Supplier OEM Division, involves specialized cleaning, preservation, and packaging services for prime contractors. The scope of work requires the cleaning and drying of components, the application of Mat 49 preservative, and the use of heat-sealed barrier bags. All wrapping and cushioning must adhere to MIL-STD-2073-1E and RP001 standards, with marking conducted according to MIL-STD-129. The final deliverable consists of 27 individually packaged and marked spur gears prepared for FOB Origin shipment. Performance of these services will take place at Tinker AFB. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026, under NAICS code 561910.

Packaging and Labeling Services

POSTED

about 10 hours ago

DEADLINE

Precision Spur Gear Fabrication (NSN 3020-01-247-2214)This subcontract involves the fabrication of 27 high-precision spur gears, specifically Hamilton Sundstrand part number 731829 under NSN 3020-01-247-2214, to support DLA Weapons Support ASC contracts. The scope of work requires the use of CNC gear hobbing and shaping equipment to perform precision machining and grinding. Performance will take place at Tinker AFB. Compliance requirements for this project include a CMMC Level 2 Self-Assessment and adherence to RQ001 and either MIL-STD-1916 or ASQ H1331 sampling standards. The contract is categorized under NAICS code 333613 and is managed by the Department of Defense.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

Pneumatic Transmitter Supplier (NSN 6685-01-139-6216)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, requires the supply of one Pneumatic Transmitter for prime contractors. The equipment must be part number 0273-0910-4 from Cameron Energy Services Corp, meeting the technical specifications for NSN 6685-01-139-6216. The supplier is responsible for physical identification and bare item marking in accordance with requirement RQ017. The contract is designated as a Total Small Business Set-Aside under NAICS code 423830. Delivery is coordinated via the First Destination Transportation program under FOB Origin terms, with the place of performance located in Tracy, California. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 10 hours ago

DEADLINE

Torque Motor Supplier (NSN 6105-01-319-3857)This subcontract involves the manufacture or sourcing of two torque motors, specifically Hamilton Sundstrand part number 793486-3, to meet NSN 6105-01-319-3857 specifications for prime contractors supporting the DLA Weapons Support ASC. The performance of the contract takes place at Tinker AFB, with delivery terms set as FOB Origin. The supplier must adhere to strict quality and compliance standards, including ISO 9001:2015 certification and a CMMC Level 2 self-assessment. Quality assurance must be performed according to MIL-STD-1916 or ASQ H1331, while packaging must comply with ASTM D3951 and MIL-STD-129. The opportunity is categorized under NAICS code 335312.

Motor and Generator Manufacturing

POSTED

about 10 hours ago

DEADLINE

Supply of Gas Turbine Engine Starters (NSN 2990-01-737-7723)This subcontract involves the supply of seven Gas Turbine Engine Starters, specifically Rolls-Royce part number NMM400280, for prime contractors supporting DLA Weapons Support ASC projects. The items must adhere to strict military standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Delivery is required FOB Origin to the DDSP New Cumberland Facility in Pennsylvania. To qualify, providers must maintain quality assurance certifications through either SAE AS9003 or ISO 9001 and complete a CMMC Level 2 self-assessment. The procurement is managed by the Department of Defense under NAICS code 423840, with a response deadline set for October 30, 2026.

Industrial Supplies Merchant Wholesalers

POSTED

about 10 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS