Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Cadmium Plating and Chromate Finishing

Active

Federal

Response Deadline10/30/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves providing specialized chemical plating and finishing services for the DLA Weapons Support ASC Commodities Division. The scope of work requires the application of a cadmium plated chromate finish to 500 steel pins, ensuring that all thickness and adhesion standards strictly adhere to NASM20392 and NASM5673 technical data packages. To achieve this, the contractor must utilize cadmium plating baths and chromate conversion tanks, incorporating rigorous chemical testing to verify thickness before the final delivery of the 500 finished pins. The project is categorized under NAICS code 332813 and will be performed at Robins Air Force Base. Interested parties should note that the solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026.

General Info

Cadmium plating and chromate finishing for 500 steel pins at Robins Air Force Base.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

332813 - Electroplating, Plating, Polishing, Anodizing, and Coloring

Place of Performance

ROBINS A F B, GA, 31098-1887, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-5837.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PIN, STRAIGHT, HEADED

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 22

subcontract

Response DeadlineOct 30

Submission deadline

Response Deadline

10/30/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs chemical plating and finishing for prime contractors on DLA Weapons Support ASC projects. Applies cadmium plated chromate finish to 500 steel pins to ensure thickness and adhesion meet NASM20392 and NASM5673 technical data packages. Utilizes cadmium plating baths and chromate conversion tanks with chemical testing for thickness verification. Delivers 500 cadmium plated chromate finished pins.

Similar Contracts

Same NAICS industry code

Aerospace Plating and Anodizing ServicesThis subcontract for Aerospace Plating and Anodizing Services supports prime contractors on DLA Weapons Support ASC missile projects. The scope of work involves providing surface treatments for mounting plates, specifically requiring electrodeposited cadmium plating according to SAE AMS-QQ-P-416 Type II/Class 3 and anodic coatings per MIL-A-8625, with cleaning performed under TT-C-490 Method I or VI. The project is managed under the Department of Defense and requires strict adherence to CMMC Level 2 and ITAR/EAR compliance standards. Performance will take place in New Cumberland, Pennsylvania, with a response deadline set for October 30, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

Industrial Coating and Surface TreatmentThis subcontract opportunity involves providing specialized surface treatments, plating, and coatings for machined sheave components supporting DLA Troop Support projects. The selected contractor will utilize industrial plating or powder coating equipment to apply finishes according to technical drawings, ensuring all components are delivered ready for assembly. A critical requirement of the performance is strict adherence to DFARS 252.223-7008, which prohibits the use of Hexavalent Chromium. The project is issued by the Department of Defense under NAICS code 332813 and is designated as a Total Small Business Set-Aside. Performance will take place in Tracy, California. Interested parties must submit their responses by November 2, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 8 hours ago

DEADLINE

Passivation of CRES 304 Aerospace FittingsThis subcontract involves the chemical passivation of 108 CRES 304 tube reducer unions for the Department of Defense under the DLA Weapons Support Fluid Handling Division. The selected contractor will utilize industrial chemical baths to remove free iron and contaminants from the stainless steel surfaces, ensuring all work adheres to strict aerospace standards for 300 series stainless steel. The project requires the contractor to hold aerospace-grade chemical processing certifications to ensure compliance and quality. Performance will take place in Cherry Point, and the final deliverable consists of 108 fully passivated tube reducer unions.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

Phosphate/Manganese Coating ServicesThis subcontract for Phosphate/Manganese Coating Services involves providing specialized surface treatments for steel accelerators to support prime contractors delivering DLA supply contracts. The scope of work requires the application of manganese coating over zinc options in strict accordance with military specifications. Performance will take place in Albany, Georgia, under the oversight of the Department of Defense, specifically the DLA Weapons Support Land Supplier Operations Vehicle Support. The contractor must ensure full compliance with DFARS 252.223-7008 regarding the use of hexavalent chromium and adhere to all ITAR and EAR regulations governing defense articles. This effort falls under NAICS code 332813 and focuses on the delivery of high-specification coated steel components. Interested parties must respond by November 2, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 8 hours ago

DEADLINE

Chemical Agent Resistant Coating (CARC) and Phosphate FinishingThis subcontract involves providing specialized surface treatment and coating services for prime contractors supporting DLA Weapons Support Land projects. The scope of work focuses on the application of Chemical Agent Resistant Coatings in accordance with DCSD Drawing 16236 CS-2300-0001 and phosphate coatings meeting RQ036 requirements, specifically for the delivery of brackets with military-grade finishes. To be eligible, providers must hold both JCP certification and RQ036 Phosphate Coating Supplier Certification. The project is managed under the Department of Defense through the DLA Weapons Support Land Supplier Operations Vehicle Support agency, with performance taking place in New Cumberland. The response deadline for this opportunity is November 2, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 8 hours ago

DEADLINE

Aerospace-Grade Finishing and Coating ServicesThis subcontract for Aerospace-Grade Finishing and Coating Services involves performing specialized surface treatments for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires the application of finishes to aerospace components in strict accordance with the DLA Master List of Technical and Quality Requirements, engineering notes in document 200415485, and Reference Drawing NR 98897. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332813 for the Department of Defense. Due to the nature of the aerospace components, the contractor must maintain full ITAR and EAR compliance. The final deliverable consists of finished, coated aerospace components meeting all specified technical standards.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

Specialized Metal Finishing and CoatingThis subcontract for Specialized Metal Finishing and Coating supports the DLA Weapons Support Land Supply Chain by providing protective and decorative finishes for Bell Crank components. The contractor is responsible for applying coatings in strict accordance with STP58-405, STP59-201, STP59-301, and STP51-400 standards, utilizing specific materials including LS3859 I/L/0 LS35085 and STP51-400 I/L/0 DS30003. All work must adhere to prohibitions regarding ozone-depleting chemicals and meet all cited technical specifications. The project is managed under NAICS code 332813 and will be performed at Robins Air Force Base. Interested parties must submit their responses by November 2, 2026. This effort is designed for prime contractors to ensure the durability and specification compliance of critical defense components.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

Aerospace Component Coating ServicesThis subcontract for Aerospace Component Coating Services involves the supply and application of specialized protective coatings to machined gas chambers for prime contractors under DLA supply contracts. The scope of work requires applying these coatings to assembled units utilizing chemical treatment tanks or industrial coating booths, ensuring all processes strictly adhere to military specifications and the provided technical data package. Managed by the Department of Defense through DLA Dist San Joaquin, the performance of this contract will take place in Tracy, California. The opportunity was posted on October 22, 2026, with a response deadline of November 2, 2026, falling under NAICS code 332813 for the delivery of completed coated gas chamber assemblies.

DLA DIST SAN JOAQUIN

POSTED

about 8 hours ago

DEADLINE

Aerospace Surface Treatment and FinishingThis subcontract for Aerospace Surface Treatment and Finishing involves applying protective coatings for prime contractors on DLA Weapons Support ASC projects. The scope of work focuses on performing chemical conversion coating, anodizing, or specialized aerospace plating for Case Assemblies under part number 94937-2, utilizing chemical baths, plating tanks, and curing ovens. The project is managed by the Department of Defense through the DLA Weapons Support ASC Supplier OEM Division, with performance taking place at Tinker AFB. To qualify, contractors must maintain ISO 9001:2015 certification and ensure full compliance with aerospace surface finish standards. The response deadline for this opportunity is October 30, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 8 hours ago

DEADLINE

Specialized Finishing/Coating for Defense FastenersThis subcontract opportunity involves providing specialized finishing and coating services for defense fasteners supporting the DLA Weapons Support ASC Commodities Division. The selected contractor will be responsible for performing heat treatment, plating, or corrosion-resistant coatings on bolts identified by NSN 5306-00-813-8527. All work must be executed according to specific technical data, with the contractor utilizing industrial plating baths or heat-treatment furnaces to test and certify coating hardness and thickness before delivering the finished products to the manufacturer. Performance will take place at Tinker AFB, and the contractor must maintain both ISO 9001 and JCP certifications to be eligible. This requirement falls under NAICS code 332813. Interested parties should note the response deadline of October 30, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

Cadmium Plating ServicesThis subcontract for Cadmium Plating Services supports the DLA Weapons Support Fluid Handling Division by providing specialized chemical immersion and electroplating for steel hydraulic adapters. The primary objective is to ensure all components meet strict military corrosion standards while adhering to environmental regulations that prohibit the use of mercury and Class I ozone-depleting chemicals. Performance will take place in Albany, Georgia, under NAICS code 332813. The contractor is responsible for delivering finished cadmium-plated steel adapters and must implement rigorous quality assurance sampling in accordance with MIL-STD-1916 or ASQ H1331. The solicitation was posted on October 22, 2026, with a response deadline of November 2, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

Specialized Brazing for Shaft AssembliesThis subcontract involves providing high-precision brazing services for shaft components and sub-assemblies to support prime contractors under the DLA Weapons Support Land Supply Chain. The work must be executed in strict accordance with AWS C3.4 and AWS C3.5 standards, which replace the previous MIL-B-7883 Type I and Type III specifications. Performance of these services will take place in New Cumberland, Pennsylvania. To be eligible for this project, contractors must maintain JCP certification and ensure full compliance with ITAR and EAR export control regulations. The opportunity was posted on October 22, 2026, with a response deadline of November 2, 2026. The project falls under NAICS code 332813 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

Flexible Cable Supplier

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 8 hours ago

DEADLINE

Supply of Hinge Pins (NSN 5315006331934)This subcontract involves the supply of precision-manufactured hinge pins, specifically NSN 5315006331934, to support prime contractors under the DLA Weapons Support ASC Commodities Division of the Department of Defense. The selected provider is responsible for manufacturing or sourcing the pins using precision machining equipment and ensuring all deliverables are transported to the designated DLA facility at Tinker AFB. Strict adherence to the DLA Master List of Technical and Quality Requirements and DFARS regulations is mandatory for this engagement. The opportunity falls under NAICS code 332510, with a response deadline set for October 30, 2026.

Hardware Manufacturing

POSTED

about 8 hours ago

DEADLINE

Precision Flat Washer Manufacturing/SupplyThis subcontract involves the fabrication and supply of 75 precision flat washers, identified by NSN 5310-01-483-5528, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The manufacturer must adhere strictly to provided technical data, specifically excluding the use of additive manufacturing. Quality control requires the implementation of zero-based sampling in accordance with MIL-STD-1916 or ASQ H1331, with packaging and labeling following RP001 and MIL-STD-2073-1E standards. The contractor is required to maintain JCP certification to handle ITAR and EAR regulated data and must provide necessary support for the source inspection of critical items. The final delivery of the 75 units is designated as FOB Origin, with the place of performance located in Tracy, California. This procurement falls under NAICS code 332722 and is managed by the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

Military-Spec Packaging and Shipping ServicesThis subcontract for Military-Spec Packaging and Shipping Services involves providing specialized packaging for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires packaging items, specifically bolts, in accordance with RP001 and MIL-STD-129, with DLA Master List requirements taking precedence over ASTM D3951. The contractor must utilize MIL-SPEC materials and labeling equipment to ensure all items are properly prepared and documented. Logistical responsibilities include coordinating FOB Origin shipments to DLA Distribution San Joaquin, with the place of performance located in Tracy, California. The project falls under NAICS code 488510 and is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division.

Freight Transportation Arrangement

POSTED

about 8 hours ago

DEADLINE

Close Tolerance Bolt FabricationThis subcontract for Close Tolerance Bolt Fabrication involves the production of 61 precision bolts for the DLA Weapons Support ASC Commodities Division. The manufacturer is required to use CNC equipment to meet NSN 5306013483463 specifications while strictly adhering to MIL-STD-1916 or ASQ H1331 sampling plans. Compliance with the Buy American Act and Berry Amendment is mandatory, and the use of additive manufacturing is expressly prohibited. The project is managed under NAICS code 332722 with performance taking place in Tracy, California. Interested parties must note the response deadline of October 30, 2026, for this Department of Defense requirement.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

Supply of Flat Washers (NSN 5310011708539)This subcontract involves the manufacture or sourcing of 23 flat washers, identified by NSN 5310011708539, to support prime contractors on DLA supply contracts. The work is managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division and will be performed in New Cumberland. The contractor must ensure all items are packaged in strict accordance with RP001 DLA Packaging Requirements for Procurement and coordinate delivery through the First Destination Transportation program. Additionally, the provider is required to maintain an active SAM registration to facilitate invoicing via the Wide Area Workflow system.

Other Nonferrous Metal Foundries (except Die-Casting)

POSTED

about 8 hours ago

DEADLINE

First Article Test (FAT) SpecialistThis subcontract, managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division, requires a First Article Test Specialist to perform validation on wiring harness components for prime contractors. The scope of work involves conducting First Article Testing on one unit, specifically NSN 0001S0000053, utilizing electrical signal integrity equipment to ensure design and manufacturing quality meet strict government standards. The selected provider is responsible for delivering a comprehensive FAT Report and one validated test unit for government approval. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by October 30, 2026, under NAICS code 541380.

Testing Laboratories and Services

POSTED

about 8 hours ago

DEADLINE

Wiring Harness Supplier (NSN 6150-01-451-1108)This subcontract, issued by the Department of Defense through the DLA Weapons Support ASC Commodities Division, requires the procurement of 15 units of wiring harness NSN 6150-01-451-1108. The selected supplier is responsible for manufacturing or sourcing components that strictly adhere to DoD specifications and ensuring all packaging complies with MIL-STD-2073-1E. The contract falls under NAICS code 335999 and requires the provider to maintain an active SAM registration. Performance will take place in New Cumberland, Pennsylvania. Interested parties must submit their responses by October 30, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 8 hours ago

DEADLINE

Supply and Manufacture of Quick Release PinsThis subcontract involves the manufacture and supply of 100 precision-engineered quick release pins for the DLA Weapons Support ASC Commodities Division under the Department of Defense. The items must strictly adhere to NSN 5315014943040 specifications and are classified as Critical Application Items. Production requires the use of precision machining and marking equipment, with bare item marking performed according to RQ017. Quality assurance is a primary requirement, with sampling conducted per MIL-STD-1916 or ASQ H1331. The work is to be performed in New Cumberland, Pennsylvania, under NAICS code 332710. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026.

POSTED

about 8 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves providing military-grade packaging and marking for 500 pins, ensuring all items are processed according to MIL-STD-2073-1E and MIL-STD-129 standards. The contractor must utilize standardized military marking equipment and MIL-SPEC materials to prepare the shipment for FOB Origin delivery to DLA Distribution Warner Robins. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division, with performance taking place at Robins Air Force Base. Interested parties should note the response deadline of October 30, 2026, for this requirement categorized under NAICS code 488410.

Motor Vehicle Towing

POSTED

about 8 hours ago

DEADLINE

Precision Steel Pin ManufacturingThis subcontract for Precision Steel Pin Manufacturing involves the production of 500 straight headed steel pins for prime contractors supporting DLA Weapons Support ASC projects. The pins must be fabricated according to technical data packages NASM20392 and NASM5673 using traditional manufacturing processes, as additive manufacturing is strictly prohibited. The final delivery consists of 500 finished, unplated steel pins. The contractor must maintain a quality management system compliant with SAE AS9003 or ISO 9001, with inspections conducted per MIL-STD-1916 or ASQ H1331. Performance will take place at Robins Air Force Base. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026.

POSTED

about 8 hours ago

DEADLINE

Military-Grade Packaging and Marking Services

Freight Transportation Arrangement

POSTED

about 8 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS