Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Cadmium Plating Services

Active

Federal

Response Deadline11/02/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Cadmium Plating Services supports the DLA Weapons Support Fluid Handling Division by providing specialized chemical immersion and electroplating for steel hydraulic adapters. The primary objective is to ensure all components meet strict military corrosion standards while adhering to environmental regulations that prohibit the use of mercury and Class I ozone-depleting chemicals. Performance will take place in Albany, Georgia, under NAICS code 332813. The contractor is responsible for delivering finished cadmium-plated steel adapters and must implement rigorous quality assurance sampling in accordance with MIL-STD-1916 or ASQ H1331. The solicitation was posted on October 22, 2026, with a response deadline of November 2, 2026.

General Info

Cadmium plating services for steel hydraulic adapters in Albany, Georgia, meeting military standards.

Agency

Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

NAICS

332813 - Electroplating, Plating, Polishing, Anodizing, and Coloring

Place of Performance

ALBANY, GA, 31704-1128, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M4-27-T-1532.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

ADAPTER, STRAIGHT, PIPE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 22

subcontract

Response DeadlineNov 2

Submission deadline

Response Deadline

11/02/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs cadmium plating for prime contractors on DLA Weapons Support Fluid Handling Division projects. Applies chemical immersion and electroplating to steel hydraulic adapters to meet military corrosion standards. Operates without Class I ozone-depleting chemicals or mercury. Requires quality assurance sampling per MIL-STD-1916 or ASQ H1331. Delivers cadmium-plated steel adapters.

Similar Contracts

Same NAICS industry code

Cadmium Plating and Chromate Finishing

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

Aerospace Plating and Anodizing ServicesThis subcontract for Aerospace Plating and Anodizing Services supports prime contractors on DLA Weapons Support ASC missile projects. The scope of work involves providing surface treatments for mounting plates, specifically requiring electrodeposited cadmium plating according to SAE AMS-QQ-P-416 Type II/Class 3 and anodic coatings per MIL-A-8625, with cleaning performed under TT-C-490 Method I or VI. The project is managed under the Department of Defense and requires strict adherence to CMMC Level 2 and ITAR/EAR compliance standards. Performance will take place in New Cumberland, Pennsylvania, with a response deadline set for October 30, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

Industrial Coating and Surface TreatmentThis subcontract opportunity involves providing specialized surface treatments, plating, and coatings for machined sheave components supporting DLA Troop Support projects. The selected contractor will utilize industrial plating or powder coating equipment to apply finishes according to technical drawings, ensuring all components are delivered ready for assembly. A critical requirement of the performance is strict adherence to DFARS 252.223-7008, which prohibits the use of Hexavalent Chromium. The project is issued by the Department of Defense under NAICS code 332813 and is designated as a Total Small Business Set-Aside. Performance will take place in Tracy, California. Interested parties must submit their responses by November 2, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 8 hours ago

DEADLINE

Passivation of CRES 304 Aerospace FittingsThis subcontract involves the chemical passivation of 108 CRES 304 tube reducer unions for the Department of Defense under the DLA Weapons Support Fluid Handling Division. The selected contractor will utilize industrial chemical baths to remove free iron and contaminants from the stainless steel surfaces, ensuring all work adheres to strict aerospace standards for 300 series stainless steel. The project requires the contractor to hold aerospace-grade chemical processing certifications to ensure compliance and quality. Performance will take place in Cherry Point, and the final deliverable consists of 108 fully passivated tube reducer unions.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

Phosphate/Manganese Coating ServicesThis subcontract for Phosphate/Manganese Coating Services involves providing specialized surface treatments for steel accelerators to support prime contractors delivering DLA supply contracts. The scope of work requires the application of manganese coating over zinc options in strict accordance with military specifications. Performance will take place in Albany, Georgia, under the oversight of the Department of Defense, specifically the DLA Weapons Support Land Supplier Operations Vehicle Support. The contractor must ensure full compliance with DFARS 252.223-7008 regarding the use of hexavalent chromium and adhere to all ITAR and EAR regulations governing defense articles. This effort falls under NAICS code 332813 and focuses on the delivery of high-specification coated steel components. Interested parties must respond by November 2, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 8 hours ago

DEADLINE

Chemical Agent Resistant Coating (CARC) and Phosphate FinishingThis subcontract involves providing specialized surface treatment and coating services for prime contractors supporting DLA Weapons Support Land projects. The scope of work focuses on the application of Chemical Agent Resistant Coatings in accordance with DCSD Drawing 16236 CS-2300-0001 and phosphate coatings meeting RQ036 requirements, specifically for the delivery of brackets with military-grade finishes. To be eligible, providers must hold both JCP certification and RQ036 Phosphate Coating Supplier Certification. The project is managed under the Department of Defense through the DLA Weapons Support Land Supplier Operations Vehicle Support agency, with performance taking place in New Cumberland. The response deadline for this opportunity is November 2, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 8 hours ago

DEADLINE

Aerospace-Grade Finishing and Coating ServicesThis subcontract for Aerospace-Grade Finishing and Coating Services involves performing specialized surface treatments for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires the application of finishes to aerospace components in strict accordance with the DLA Master List of Technical and Quality Requirements, engineering notes in document 200415485, and Reference Drawing NR 98897. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332813 for the Department of Defense. Due to the nature of the aerospace components, the contractor must maintain full ITAR and EAR compliance. The final deliverable consists of finished, coated aerospace components meeting all specified technical standards.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

Specialized Metal Finishing and CoatingThis subcontract for Specialized Metal Finishing and Coating supports the DLA Weapons Support Land Supply Chain by providing protective and decorative finishes for Bell Crank components. The contractor is responsible for applying coatings in strict accordance with STP58-405, STP59-201, STP59-301, and STP51-400 standards, utilizing specific materials including LS3859 I/L/0 LS35085 and STP51-400 I/L/0 DS30003. All work must adhere to prohibitions regarding ozone-depleting chemicals and meet all cited technical specifications. The project is managed under NAICS code 332813 and will be performed at Robins Air Force Base. Interested parties must submit their responses by November 2, 2026. This effort is designed for prime contractors to ensure the durability and specification compliance of critical defense components.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

Aerospace Component Coating ServicesThis subcontract for Aerospace Component Coating Services involves the supply and application of specialized protective coatings to machined gas chambers for prime contractors under DLA supply contracts. The scope of work requires applying these coatings to assembled units utilizing chemical treatment tanks or industrial coating booths, ensuring all processes strictly adhere to military specifications and the provided technical data package. Managed by the Department of Defense through DLA Dist San Joaquin, the performance of this contract will take place in Tracy, California. The opportunity was posted on October 22, 2026, with a response deadline of November 2, 2026, falling under NAICS code 332813 for the delivery of completed coated gas chamber assemblies.

DLA DIST SAN JOAQUIN

POSTED

about 8 hours ago

DEADLINE

Aerospace Surface Treatment and FinishingThis subcontract for Aerospace Surface Treatment and Finishing involves applying protective coatings for prime contractors on DLA Weapons Support ASC projects. The scope of work focuses on performing chemical conversion coating, anodizing, or specialized aerospace plating for Case Assemblies under part number 94937-2, utilizing chemical baths, plating tanks, and curing ovens. The project is managed by the Department of Defense through the DLA Weapons Support ASC Supplier OEM Division, with performance taking place at Tinker AFB. To qualify, contractors must maintain ISO 9001:2015 certification and ensure full compliance with aerospace surface finish standards. The response deadline for this opportunity is October 30, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 8 hours ago

DEADLINE

Specialized Finishing/Coating for Defense FastenersThis subcontract opportunity involves providing specialized finishing and coating services for defense fasteners supporting the DLA Weapons Support ASC Commodities Division. The selected contractor will be responsible for performing heat treatment, plating, or corrosion-resistant coatings on bolts identified by NSN 5306-00-813-8527. All work must be executed according to specific technical data, with the contractor utilizing industrial plating baths or heat-treatment furnaces to test and certify coating hardness and thickness before delivering the finished products to the manufacturer. Performance will take place at Tinker AFB, and the contractor must maintain both ISO 9001 and JCP certifications to be eligible. This requirement falls under NAICS code 332813. Interested parties should note the response deadline of October 30, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

Specialized Brazing for Shaft AssembliesThis subcontract involves providing high-precision brazing services for shaft components and sub-assemblies to support prime contractors under the DLA Weapons Support Land Supply Chain. The work must be executed in strict accordance with AWS C3.4 and AWS C3.5 standards, which replace the previous MIL-B-7883 Type I and Type III specifications. Performance of these services will take place in New Cumberland, Pennsylvania. To be eligible for this project, contractors must maintain JCP certification and ensure full compliance with ITAR and EAR export control regulations. The opportunity was posted on October 22, 2026, with a response deadline of November 2, 2026. The project falls under NAICS code 332813 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Same awarding agency

Globe Valve Parts Kit SupplierThis subcontract involves the supply of 49 completed and packaged globe valve parts kits for prime contractors supporting the Defense Logistics Agency Weapons Support Fluid Handling Division. The scope of work includes the manufacturing or sourcing of components, kit assembly, and packaging in strict accordance with MIL-STD-2073-1 Appendix D. Additionally, the supplier must ensure all marking and labeling comply with MIL-STD-129 and provide Safety Data Sheets that meet Federal Standard No. 313 and 29 CFR 1910.1200(g) requirements. The project falls under NAICS code 332911 and is managed by the Department of Defense. Performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties must adhere to the response deadline of November 2, 2026, to be considered for this procurement effort.

Industrial Valve Manufacturing

POSTED

about 8 hours ago

DEADLINE

MIL-SPEC Packaging and Preservation ServicesThis subcontract for MIL-SPEC Packaging and Preservation Services involves providing specialized packaging and marking for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The scope of work requires the sealing of 1,065 O-rings in medium-duty, waterproof, greaseproof, and opaque bags in accordance with MIL-DTL-117 to protect against UV deterioration. Additionally, the contractor must execute all marking and labeling per MIL-STD-2073-1E and MIL-STD-129 standards to ensure items are prepared for military transport. The final deliverables are to be delivered to Tinker AFB. The project falls under NAICS code 561910 and is managed under the Department of Defense. Interested parties should note the response deadline of November 2, 2026.

Packaging and Labeling Services

POSTED

about 8 hours ago

DEADLINE

Specialized O-Ring Fabrication (NSN 5331010074901)This subcontract involves the fabrication of 1,065 high-performance O-rings for the Department of Defense under the DLA Weapons Support Fluid Handling Division. The project requires strict adherence to technical specifications SAE AMS-R-25988B Revision B or MIL-DTL-25988/1B Revision B, utilizing asbestos-free compounds in accordance with FED-STD-313. All deliverables must comply with the Buy American Act and the Berry Amendment. The work is associated with NSN 5331010074901 and falls under NAICS code 326299, with the place of performance located at Tinker AFB. Interested parties must respond by November 2, 2026, to provide the finished components meeting all specified military and federal standards.

All Other Rubber Product Manufacturing

POSTED

about 8 hours ago

DEADLINE

Supplier of Diaphragm Baffles (NSN 4820003350017)This subcontract involves the supply of ten specialized diaphragm baffles for the DLA Weapons Support Fluid Handling Division. The hardware must match Eaton Corporation part number 200819 under NSN 4820003350017 and be delivered FOB Origin to Tinker AFB. The supplier must ensure strict adherence to ASTM D3951 and MIL-STD-129 for marking and labeling, as well as RP001 DLA packaging requirements. Additionally, the contractor is required to maintain Buy American Act compliance and complete a CMMC Level 2 self-assessment.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 8 hours ago

DEADLINE

Military-Grade Packaging and Palletization ServicesThis subcontract involves providing specialized packaging, marking, and palletization services for the Department of Defense under the DLA Weapons Support Fluid Handling Division. The scope of work requires the processing of 97 hose assemblies, ensuring all items are packaged according to ASTM D3951, marked per MIL-STD-129, and palletized in accordance with RP001. The contractor must utilize industrial labeling equipment and MIL-SPEC packaging materials to meet strict military standards. The completed deliverables are to be transported to DLA Distribution DDSP in New Cumberland, Pennsylvania. This project falls under NAICS code 493110 and is designated for prime contractors supporting the agency's fluid handling operations.

General Warehousing and Storage

POSTED

about 8 hours ago

DEADLINE

Nonmetallic Hose Assembly FabricationThis subcontract involves the fabrication of 97 nonmetallic hose assemblies for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The required assemblies must feature a 1/2 inch inside diameter and a nominal overall length of 108.0 inches, including perforated covers. All production must strictly adhere to NSN 4720-01-359-0598 and RA001 standards. The project is subject to strict regulatory requirements, including compliance with the Buy American Act and the Berry Amendment. Performance for this contract will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 2, 2026.

All Other Plastics Product Manufacturing

POSTED

about 8 hours ago

DEADLINE

Supply of Mounting Plates (NSN 5340-01-318-6909)This subcontract involves the fabrication or procurement of two mounting plates, identified by NSN 5340-01-318-6909, for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The selected provider is responsible for ensuring all items are packaged in strict accordance with DLA RP001 Packaging Requirements for Procurement. To be eligible for this opportunity, contractors must possess a valid UEI and CAGE code. The project falls under NAICS code 332510, with a response deadline set for November 2, 2026.

Hardware Manufacturing

POSTED

about 8 hours ago

DEADLINE

Supply of Hose Clamps (NSN 4730-01-596-1298)This subcontract involves the supply of 124 hose clamps (NSN 4730-01-596-1298) for prime contractors working with the DLA Weapons Support Fluid Handling Division. The contractor is responsible for manufacturing or sourcing units that strictly adhere to SAE J1508-2009 and the DLA Master List of Technical and Quality Requirements, with a specific prohibition against the use of additive manufacturing. All parts must be packaged and labeled in accordance with ASTM D3951 and MIL-STD-129 standards and delivered FOB Origin. Additionally, the contractor must maintain cybersecurity compliance as outlined in NIST SP 800-171. The performance of this contract is associated with the location in Tracy, California.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

MIL-SPEC Packaging and Marking for Fluid Handling ComponentsThis subcontract involves providing military-grade packaging and marking services for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The scope of work requires the preparation of five valves for First Destination Transportation shipment, ensuring full preservation and traceability of the fluid handling components. Technical execution must strictly adhere to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging, utilizing QUP 001, Pres Mthd AE, and designated cushioning and dunnage materials. The performance of these services will take place in Tracy, California, under NAICS code 488510.

Freight Transportation Arrangement

POSTED

about 8 hours ago

DEADLINE

Supply of Safety Relief Valves (NSN 4820-01-238-5948)This subcontract involves the procurement or manufacture of five specialized safety relief valves for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The required components must match Eaton Aerospace part numbers 847357 and L1-CS-06-B-50, falling under NSN 4820-01-238-5948. Performance will take place in Tracy, California, with all deliverables subject to strict sampling and quality assurance standards according to MIL-STD-1916 or ASQ H1331. The contractor must ensure full compliance with the Buy American Act and adhere to environmental prohibitions regarding the use of mercury and hexavalent chromium. Interested parties must respond by November 2, 2026, to fulfill the requirements of this specialized equipment supply effort.

Industrial Valve Manufacturing

POSTED

about 8 hours ago

DEADLINE

Supply of Special Plug (NSN 5342-00-839-1515)This subcontract involves the procurement of 13 units of a special plug, identified by NSN 5342008391515, for prime contractors supporting the DLA Weapons Support Fluid Handling Division of the Department of Defense. The selected provider is responsible for fabricating or sourcing the hardware to ensure full compliance with the established NSN technical specifications. Strict adherence to military and industry standards is required for quality assurance and logistics. All items must be inspected and sampled according to MIL-STD-1916 or ASQ H1331 Table 1, packaged in accordance with ASTM D3951, and marked and labeled per MIL-STD-129. Performance of the contract will take place in Cherry Point, with a response deadline set for November 2, 2026.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 8 hours ago

DEADLINE

Nonmetallic Tubing Supplier (NSN 4720-01-245-6616)This subcontract involves the supply of 709 feet of specialized nonmetallic tubing for prime contractors serving the Department of Defense DLA Weapons Support Fluid Handling Division. The required tubing must feature a 0.050 inch inner diameter and a 0.110 inch outer diameter, strictly adhering to Saint-Gobain F4040A specifications. The supplier is responsible for ensuring all materials comply with the Buy American Act and ASTM D3951 standards. Additionally, all products must be packaged and marked in accordance with MIL-STD-129 and DLA Master Lists RA001 and RP001. Performance for this contract is centered in Tracy, California.

All Other Plastics Product Manufacturing

POSTED

about 8 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS