Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Aerospace Component Manufacturing – Output Drum Replacement

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract mandates the manufacture and delivery of a revised output drum component, part number 373967-6, to serve as a direct replacement for the legacy part number 373967-4, in strict accordance with engineering drawing DWG 373967 Revision E, specifically incorporating Note 18. The new component must meet all technical and dimensional specifications outlined in the revised drawing to ensure full interchangeability and operational compatibility within existing aerospace systems. This substitution is intended to modernize the component while maintaining performance integrity and reliability standards required by the defense supply chain. Executed as a subcontract under the auspices of the Defense Logistics Agency, part of the Department of Defense, the work falls under NAICS code 336414, which classifies it within the aerospace product and parts manufacturing sector. The contract was posted on July 16, 2026, and is linked to the award SPS4AX20D9403 with delivery identifier SPE4AX26F3439. Performance is expected to comply with federal acquisition standards, and delivery must occur without disruption to current maintenance and production schedules. The replacement initiative reflects a broader effort to upgrade aging components in military aerospace equipment through precise engineering revisions and validated manufacturing processes.

General Info

Manufacture and deliver revised output drum part 373967-6 per DWG 373967 Rev E, Note 18, for aerospace defense systems.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

336414 - Guided Missile and Space Vehicle ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 16

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and deliver revised output drum component (P/N 373967-6) as a direct substitution for legacy P/N 373967-4, per engineering drawing DWG 373967 Rev E, Note 18.

Similar Contracts

Same NAICS industry code

Landsat 10 SpacecraftThe National Aeronautics and Space Administration’s Goddard Space Flight Center is soliciting proposals for the acquisition of the Landsat 10 Spacecraft under RFP 80GSFC26R0015, with responses due by August 13, 2026. This solicitation replaces the previous draft RFP issued in May 2026 and is intended to secure a spacecraft system capable of delivering continuous, high-quality multi-spectral imagery for at least five years. The mission will operate from a 653-kilometer sun-synchronous low-Earth orbit and is designed to collect Visible to Shortwave-Infrared and Thermal Infrared data with a 26-band instrument suite, achieving a ground sampling distance of 10 to 60 meters and a swath width of approximately 164 kilometers. NASA will provide the space segment and launch services, while the U.S. Geological Survey will manage the ground system and mission operations. The spacecraft must meet stringent environmental requirements outlined in the Space Environmental Requirements Document, covering radiation, space charging, magnetics, atomic oxygen, and micrometeoroid/debris exposure, and must adhere to applicable standards such as MIL-STD-883 for microcircuits. The acquisition includes extensive technical deliverables governed by a series of attachments detailing critical interfaces and analytical models: the Spacecraft-to-Ground Interface Requirement Document, Payload-to-Launch Services Interface Description Document, Space Environmental Requirements Document, and Analytical Math Model Definitions, which require 3D CAD, thermal, structural, dynamic, and attitude control models to be submitted for verification. Government-furnished equipment and services are clearly delineated with precise timelines, including launch umbilical connectors and electrical interface connectors due at L-18 months, payload processing facility access from L-60 days through L+7 days, and propellant delivery one month prior to launch. The launch services provider support is tied to the observatory’s mechanical testing schedule, with select services required no earlier than 12 months before launch. All analytical models, including those for the spacecraft and instrument, must be delivered to the Landsat 10 Project Office. The solicitation includes key reference documents such as the Design Reference Case DRC-18 and the World Reference System-3 Definition to ensure consistent data alignment with the Landsat archive. No set-aside provisions apply, the NAICS code is 336414, and the contracting office is located in Greenbelt,

NASA Goddard Space Flight Center

POSTED

DEADLINE

RFI-Drone CLTThe United States Special Operations Command is conducting market research to identify industry capabilities for designing and manufacturing a specialized unmanned aerial system compatible with the Common Launch Tube used on SOF fixed-wing platforms. This initiative seeks innovative, out-of-the-box solutions for a SOF-peculiar munition weighing no more than 55 pounds, with a maximum form factor of 5.9 inches in diameter and 42 inches in length, capable of being air-launched between 120 and 300 knots and at altitudes from 5,000 feet AGL to 35,000 feet MSL. The system must feature a passive seeker with integrated automatic target recognition, a kinetic warhead optimized for weight constraints, electro-optical and infrared sensors, and support for FANTOM Core collaborative autonomy via machine-to-machine API or Battle Management System integration. Minimum technical readiness level 6 is required, with a mission profile that includes pre-planned routing, a minimum 75-nautical-mile range, 40-minute loiter time at 500–3,000 feet AGL, and cruise speeds of 50–100 knots with a dash capability exceeding 100 knots. Responses must be submitted as unclassified white papers not exceeding 10 pages and include company details, CAGE and DUNS codes, point of contact, existing contract vehicles, Agile and spiral development experience, systems engineering and manufacturing processes, Modular Open Systems Approach and Weapon Open Systems Architecture compliance, development and production timelines, manufacturing maturity and monthly output estimates, and manpower requirements. The system must withstand extreme environmental conditions—temperatures from -40°F to 135°F, MIL-STD-810H vibration profiles, and a two-foot drop shock test—without icing concerns. A rough order of magnitude cost estimate is requested for a single demonstration on an AC-130J Ghostrider or other SOF platform, covering cost, schedule, assumptions, risks, and government-furnished equipment needs. Responses must not include classified, proprietary, or sensitive information, and submission does not constitute a contract offer or entitle respondents to reimbursement. All submissions are due by August 17, 2026, and will be used solely to inform future acquisition planning and strategy development.

POSTED

DEADLINE

Aerospace Diaphragm Manufacturing and SupplyThe contract entails the manufacture and supply of a rolling diaphragm designated by NSN 1660-01-317-8351, intended for use in aerospace fluid control systems and required to meet rigorous military or original equipment manufacturer specifications. This subcontract falls under NAICS code 336414, indicating classification within aerospace manufacturing, and is sponsored by the Defense Logistics Agency under the Department of Defense. The work must ensure full compliance with technical and quality standards expected for mission-critical aerospace components, though specific performance locations and contact details are not provided. The solicitation was posted on July 16, 2026, and the contract is accessible via the DIBBS platform under award number SPE4A725PF268.

Defense Logistics Agency

POSTED

DEADLINE

Electrical Connector Component ManufacturingThe contract involves the manufacture and delivery of 1,094 termination shields for electrical connectors, specifically designated by NSN 5935016918857, under military specifications and QPL standards to ensure compliance with defense-grade performance criteria. The work is being performed as a subcontract under the broader procurement efforts of the Defense Logistics Agency within the Department of Defense, with the North American Industry Classification System code 336414 indicating focus on other aircraft parts and equipment manufacturing. Delivery must adhere to strict military quality and certification benchmarks, ensuring the components are suitable for critical aerospace and defense applications. The solicitation was posted on July 16, 2026, and is linked to contract number SPE7M326V3710, though no specific delivery location or point of contact is provided. The contract does not indicate any set-aside status or small business preferences, and performance location details are not specified, suggesting that the supplier may operate from any qualified facility capable of meeting the stringent technical requirements. The absence of a solicitation number implies this may be a direct award or follow-on action within an existing framework agreement, focusing solely on fulfillment of the termination shield order without additional competitive bidding at this stage.

Defense Logistics Agency

POSTED

DEADLINE

Counter Air Missile Program (CAMP)-Ground Launched Counter Air (GLCA) Enterprise Test Vehicle (ETV) Solicitation ReleaseThe Air Force Life Cycle Management Center’s Armament Directorate is soliciting proposals under a 10 U.S.C. 4022 Prototype Other Transaction agreement for the Counter Air Missile Program—Ground Launched Counter Air Enterprise Test Vehicle, aiming to develop a supersonic, affordable, digitally engineered, and modular ground-launched missile system with an integrated Common Containerized Launcher. This effort is designed to accelerate the prototyping and demonstration of commercial or minimally modified subsystems, addressing rising complexity and extended development timelines in defense acquisition, with the potential to transition into a follow-on Family of Affordable Mass Missiles program should prototyping succeed and funding be secured. Proposals must be submitted by 4:00 PM Central Daylight Time on August 3, 2026, with in-person oral presentations scheduled for the week of August 10, 2026, and vendors must notify the government of their intent to respond by July 10, 2026. Access to the controlled solicitation document package, which contains Controlled Unclassified Information restricted to Distribution D, is limited to prime vendors registered in the Joint Certification Program through the Defense Logistics Agency or otherwise verified as capable of handling CUI, requiring submission of a valid DD Form 2345 to designated government points of contact. Only U.S. citizens or lawful permanent residents physically located in the United States may access the information, and foreign-owned or foreign-controlled entities are explicitly prohibited from participating as primes or subcontractors. All respondents must be actively registered in the System for Award Management and bear all costs associated with proposal development, as the government will not reimburse any bid or administrative expenses. No contract award is guaranteed, and the government retains the right to cancel the solicitation at any time without obligation or compensation. The acquisition is conducted under FA8659-26-R-9001, with correspondence directed to Garet Simmons, Brent Barnhill, and Susan Sparks, and all documentation must be downloaded from SAM.gov; no hard copies will be provided.

FA8659 Aflcmc Ebi

POSTED

DEADLINE

Project Manager, Short and Intermediate Effectors for Layered Defense Maneuver-Short Range Air Defense Increment 3, Next Generation Short Range Interceptor ProductionThe U.S. Army’s Project Manager for Short and Intermediate Effectors for Layered Defense, under the Maneuver Short Range Air Defense (M-SHORAD) program, is issuing a Request for Information (RFI) to gather industry input on the production of the Next Generation Short Range Interceptor (NGSRI), a surface-to-air missile system designed to replace the Stinger and counter evolving aerial threats including rotary and fixed-wing aircraft and unmanned systems. This RFI, extended to July 26, 2026, is explicitly not an invitation to bid or a promise to issue a future contract; it serves solely as market research to evaluate industry capabilities, production readiness, and technical solutions for a planned production run of 11,000 missiles and 2,200 Control Launch Assemblies beginning in FY28. Responses must include detailed information on corporate structure, past experience in guided missile manufacturing, production capabilities, risk mitigation strategies, supply chain management, and cost and schedule estimates aligned with the Army’s production timeline, with proposed unit costs based on a ten-year horizon and assumptions around low-rate initial production volumes. All submissions must be unclassified, mark proprietary content clearly, and include a white paper not exceeding 20 pages. Respondents are required to address comprehensive technical and programmatic elements including integration of logistics support, training materials, total package fielding, and Full Material Release processes. The RFI seeks information on manufacturing readiness levels, achievable minimum and maximum production rates, retrofitting costs for compatibility with existing Stinger launcher platforms, and data rights for technical documentation. Companies must identify their business size under NAICS code 336414, specify any small business certifications, and disclose subcontractor involvement, particularly with non-traditional defense contractors or disadvantaged businesses. Responses must be sent via email to designated Army contracting officials by the deadline, with no phone inquiries permitted. The government will use all received submissions to assess industry capacity and inform future acquisition decisions, reserving the right to seek clarifications and emphasizing that no reimbursement will be provided for response costs. All information submitted becomes government property and will not be returned.

POSTED

DEADLINE

JAGM/HELLFIRE MISSILE SPARESThe Defense Logistics Agency at Redstone Arsenal, Alabama, is soliciting bids under solicitation number SPRRA226R0030 for an inert warhead assembly, part number 13415264, with an estimated quantity of 200 units, to support the Joint Air-to-Ground Missile and Hellfire weapon systems for the U.S. Army Aviation and Missile Life Cycle Management Command. This acquisition is restricted exclusively to Lockheed Martin Corporation, CAGE code 04939, under FAR 6.103-1(b) due to the nature of the item, which requires direct procurement from the original manufacturer. The procurement is conducted under the Lockheed Martin Captain of Industries Supplier Capability Contract SPE4AX22D9000 using a firm-fixed-price, indefinite delivery vehicle. The estimated production lead time is 870 days after contract award without first article testing, and the contractor must manage all aspects of manufacturing and production, including supply chain, logistics, forecasting, long-lead parts procurement, material obsolescence mitigation, and final delivery. All offerors must meet mandatory prequalification requirements to be eligible for award, and firms are encouraged to seek source approval to qualify for future opportunities. The contractor is responsible for all recurring and nonrecurring engineering efforts required to establish qualified source status and assumes full financial responsibility for any associated costs. First Article Testing, governed by FAR 52.209-3, is required to validate manufacturing capability, with the contractor bearing the burden of providing facilities, test equipment, and personnel, while the Defense Contract Management Agency Quality Assurance Representative must participate. A First Article Test Report is mandatory for acceptance, and waivers may be submitted with supporting documentation. The contract includes strict export control restrictions under the Arms Export Control Act and Export Administration Act, prohibiting unauthorized release of technical data outside the United States. Offerors and their suppliers must possess an active United States/Canada Joint Certification Program certification to access restricted information. The procurement has a one-year period of performance with performance location in Orlando, Florida. Proposals must be submitted by July 31, 2026, and all communications must be directed to the designated points of contact through email, using the specified subject line. The solicitation will be published exclusively via SAM.gov, and the government retains the right to cancel the acquisition at any time prior to award without financial obligation to offerors. The government anticipates subsequent solicitations will request Economic Order Quantities to optimize procurement efficiency based

Al DLA Aviation At Huntsville

POSTED

DEADLINE

Laser Interferometer Space Antenna (LISA) Frequency Reference System (FRS) FlightNASA GSFC is seeking capability statements from industry sources to procure three flight units and one flight spare Frequency Reference System (FRS) for the Laser Interferometer Space Antenna (LISA) mission, with targeted delivery dates extending from February 2029 through May 2030. Each FRS unit must include an optical reference cavity and配套 electronics, requiring full design, fabrication, and qualification through rigorous environmental testing, including EMI/EMC, vibration, shock, thermal balance across four temperature cases, and eight thermal vacuum cycles with stringent temperature plateau and performance verification requirements. The procurement involves multiple critical reviews, from kickoff and preliminary design through critical design, pre-environmental, and pre-shipment inspections, supplemented by monthly status reviews to track technical performance, schedule, and anomalies. The vendor must also support NASA’s broader project design reviews and deliver comprehensive performance validation before, during, and after all environmental testing. The agency is conducting market research to inform competition strategy and small business participation goals, encouraging submissions from small businesses, HBCUs, minority institutions, and other designated categories, with feedback sought on subcontracting potential, barriers to entry, and strategies to broaden participation such as component breaking or mentor-protégé arrangements. Respondents must submit a capability statement no longer than 10 pages and a Rough Order of Magnitude cost estimate segmented into first-unit NRE and subsequent-unit costs, covering all engineering, assembly, integration, management, and assurance activities, with submissions due by August 6, 2026, via email to the designated point of contact. No solicitation exists at this time, and responses will not be compensated or acknowledged.

NASA Goddard Space Flight Center

POSTED

DEADLINE

Notice of Contract Action for Joint Air-to-Surface Standoff Missile (JASSM) and Long Range Anti-Ship Missile (LRASM)The Department of Defense, through the United States Air Force’s Air Force Life Cycle Management Center, is initiating a sole-source procurement to increase production quantities of Joint Air-to-Surface Standoff Missiles and Long Range Anti-Ship Missiles from 11,200 to 16,450 units across multiple lots, spanning a five- to seven-year timeline. This expansion supports the full-rate production of both missile systems and encompasses not only the missiles themselves but also associated hardware, software, containers, maintenance systems, telemetry kits, targeting software, simulation tools, technical data, obsolescence management, upgrades, and integrated sustainment activities. The effort includes maintaining two critical manufacturing facilities, ensuring operational safety and effectiveness, and providing full lifecycle support such as non-warranty repairs, replacement parts, special tooling, demilitarization, and administrative infrastructure. Deliveries are expected to commence approximately 27 months after contract award. The procurement is restricted exclusively to Lockheed Martin Missiles and Fire Control in Orlando, Florida, and Lockheed Martin Rotary and Mission Systems in Mount Laurel, New Jersey, under the authority of a single-source justification due to unique production capabilities, proprietary software, irreplaceable technical data, and the absence of any viable alternative sources. The government has no ownership of the underlying technical package, and no other vendor can replicate the existing production infrastructure or supply chain relationships. This requirement demands significant upfront investment and lead time, and all government-owned equipment used in production remains unavailable to any other contractor. Commercial vendors may submit capabilities statements by 4:00 PM CDT on July 25, 2026, but submissions are not offers and will not result in a binding contract. Only U.S. entities may respond, and all submissions will be reviewed solely by government personnel, with administrative support contractors bound by strict nondisclosure requirements. For subcontracting inquiries, contact Adam Sperling at Lockheed Martin.

FA8682 Aflcmc Ebjk

POSTED

DEADLINE

Update to JASSM & LRASM April 2024 Presolicitation NoticeThe U.S. Air Force is increasing production quantities of Joint Air-to-Surface Standoff Missiles and Long Range Anti-Ship Missiles from 5,510 to 6,645 units across multiple production lots, covering JASSM Lots 22-26 and LRASM Lots 9-12 in various configurations. This adjustment supports sustained full-rate production and encompasses not only the missiles themselves but also associated hardware, software including mission planning and maintenance systems, missile containers, aircraft interfaces, telemetry kits, targeting software, simulators, technical data, obsolescence management, upgrades, and sustainment infrastructure. The effort includes maintaining two critical production facilities, P-14 and P-72, along with repair infrastructure for non-warranty components, replacement parts, special tooling, demilitarization, and administrative support necessary to ensure operational safety, suitability, and effectiveness over the system’s lifecycle. Deliveries are expected to commence approximately 27 months after contract award. This procurement is being conducted as a sole-source award to Lockheed Martin Missiles and Fire Control in Orlando, Florida, and Lockheed Martin Rotary and Mission Systems in Mount Laurel, New Jersey, under the authority of RFO 6.103-1 due to unique capabilities, proprietary software, and the absence of a government-owned technical data package that could enable competition. Lockheed Martin’s facilities and supply chain are uniquely positioned to sustain production, with no viable alternatives available. The requirement involves significant upfront investment and extended preparation timelines, and government-owned equipment critical to production is not transferable to any other vendor. Responses must be submitted by 4:00 p.m. CST on July 30, 2026, in the form of a concise capabilities statement not exceeding ten pages, with no guarantee of feedback or acknowledgment. Foreign participation is prohibited, and only government personnel will review submissions, though administrative support contractors may handle submissions under strict nondisclosure agreements. All questions should be directed to the designated points of contact, and no formal solicitation exists at this time.

FA8682 Aflcmc Ebjk

POSTED

DEADLINE

Two-Axis Gimbal for Kilowatt-Class Hall Thrusters Request for Information (RFI)The Jet Propulsion Laboratory is seeking information from qualified vendors regarding the capability to provide a two-axis Thruster Gimbal Assembly (TGA) mechanism for use with kilowatt-class Hall thrusters, specifically the MaSMi and NASA-H71M models, for spacecraft attitude control and momentum unloading. The TGA must meet stringent performance criteria including a minimum angular range of ±15 degrees per axis, pointing accuracy of ±0.1 degrees or better, a mass of no more than 5 kg, a mounting footprint under 24 cm x 24 cm, a height under 15 cm, power consumption under 20 W during operation and 5 W in idle mode, and compatibility with a 28 V nominal input voltage. The system must operate reliably in extreme environments, including temperatures as low as -40°C, and must include position locking for launch security while handling heat flux up to 15 W from the thrusters. Environmental survivability requirements encompass launch vibration, shock, thermal vacuum, radiation tolerance, and operational lifetime. Vendors are expected to submit detailed technical responses using a provided Vendor Response Template, which must include company identification with CAGE/UEI codes, socioeconomic classifications such as Small Business, Small Disadvantaged Business, or other certified categories under the NAICS code 336414 for Guided Missile and Space Vehicle Manufacturing, with a small business size standard of 1,300 employees. Teaming arrangements, including any SBA-approved joint ventures, must also be disclosed. All responses are due electronically by 10:00 PM Eastern Time on July 24, 2026, to Dominique Reyes at Dominique.reyes@jpl.nasa.gov, with the subject line "Two-Axis Gimbal for Kilowatt-Class Hall Thrusters RFI Response". Initial written questions were due by June 24, 2026, and JPL’s responses to those questions were issued on July 15, 2026, as outlined in Addenda 2, which superseded earlier dates. Addendum 1 had previously extended the response deadline from July 17 to July 24, 2026. This Request for Information is strictly for market research and planning purposes, with no obligation to award a contract; participants bear full responsibility for any costs incurred in responding. All submitted information is considered provided with unlimited rights to JPL, with no liability assumed for its use

NASA Management Office -- Jpl

POSTED

DEADLINE

National Security Space Launch (NSSL) Enterprise Payload Processing Management (EPPM) DRAFT Request for Proposal (RFP) and Request for InformationThe U.S. Space Force is seeking industry input through a draft Request for Proposal and Request for Information for the Enterprise Payload Processing Management initiative, which aims to unify and centralize the scheduling and procurement of payload processing services across national security, civil, and commercial missions. Currently managed ad hoc by individual System Program Offices, this effort will transition to a single, government-led process under Space Access to maximize limited processing capacity and improve schedule visibility. The planned procurement will be structured as a Multiple Award Indefinite-Delivery, Indefinite-Quantity contract with a five-year base period, featuring annual on-ramps to ensure a dynamic and competitive industrial base, allowing new entrants and existing contractors to add capabilities. Once on the IDIQ, qualified firms will compete for specific mission task orders through Fair Opportunity Proposal Requests. Responses to the draft solicitation are due by 1500 Pacific Time on August 6, 2026, and must be submitted via SAM.gov, with additional controlled documents available through DoD SAFE upon request to the designated Contracting Officer and Contract Specialist. The North American Industry Classification System code is 336414 with a size standard of 1,300 employees, and small business inquiries can be directed to the specified Small Business point of contact. The Government explicitly states this is a draft solicitation for information only, not a formal solicitation, and responses will not be considered offers or form the basis of any binding agreement. No costs incurred in response will be reimbursed. All submissions will be handled under confidentiality agreements, and proprietary information may be shared with approved support contractors performing technical and advisory services for the program office. The final RFP is projected for release in the first quarter of fiscal year 2027.

FA8811 Assrd Acss To Spc Ssc/aak-La

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supply of Epinephrine Injection (NSN: 6505015273957)The contract mandates the manufacture, packaging, labeling, and delivery of FDA-approved Epinephrine Injection meeting all current Good Manufacturing Practices and Defense Logistics Agency specifications, with the final product destined for a U.S. Navy vessel under FOB Destination terms. The product is identifiable by National Stock Number 6505015273957 and falls under the NAICS code 283410, indicating its classification within pharmaceutical manufacturing. All activities must adhere strictly to regulatory and military standards to ensure safety, potency, and compliance throughout the supply chain. The agreement is structured as a subcontract managed under the Department of Defense through the Defense Logistics Agency, with the work scheduled to be performed in alignment with federal procurement timelines and delivery protocols. The contract was posted on July 20, 2026, and the delivery endpoint is a U.S. Navy vessel, requiring precise logistical coordination and documentation to meet military operational needs. The product must be fully compliant with both FDA and DLA requirements, including proper labeling, traceability, and packaging suitable for military transport and storage conditions.

POSTED

about 18 hours ago

DEADLINE

Wiper Ring Supply – Precision Sealing ComponentThe contract entails the supply of 17 precision-engineered wiper rings, identified by Part Number 351-44900-330A and National Stock Number 5330-01-284-1598, manufactured to meet specific military standards for performance and reliability. Each unit must comply with all relevant technical and quality requirements, including proper packaging and labeling as dictated by defense regulations. Delivery must be completed in full accordance with established logistical protocols to ensure operational readiness and traceability. The contract is structured as a subcontract under the authority of the Defense Logistics Agency, part of the Department of Defense, and classified under NAICS code 332996, indicating its focus on other fabricated metal product manufacturing. The solicitation was posted on July 20, 2026, and performance is expected to align with DLA’s supply chain directives, though the specific delivery location and point of contact are not detailed. Access to official contract records is available through the DIBBS portal using the provided reference number.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 18 hours ago

DEADLINE

Cybersecurity Compliance for Covered Defense InformationThe contract requires the implementation and ongoing maintenance of cybersecurity controls aligned with NIST SP 800-171 to protect covered defense information handled by the contractor. This includes establishing and sustaining a compliant security posture across systems and networks that process, store, or transmit sensitive defense data, ensuring that all required controls are properly configured, monitored, and documented. The contractor must also be prepared to support timely and accurate cyber incident reporting in accordance with federal requirements, enabling rapid response and coordination with defense authorities when security breaches or anomalies occur. This subcontract falls under the NAICS code 541512 for computer systems design services and is issued by the Defense Logistics Agency under the Department of Defense. The work is focused on sustaining compliance with stringent federal cybersecurity standards, and while no specific location is listed for performance, the obligations apply wherever covered defense information is accessed or managed. The contract underscores a critical requirement for continuous adherence to NIST controls and active participation in the defense cyber incident response framework, making cybersecurity expertise and operational readiness key to successful contract execution.

Computer Systems Design Services

POSTED

about 18 hours ago

DEADLINE

Hazardous Materials Compliance & DocumentationThe contract requires strict adherence to OSHA Hazard Communication standards and DFARS 252.223-7001 for all hazardous materials linked to connectors, ensuring proper labeling and accurate safety data sheet generation to meet federal regulatory requirements. All documentation must align with current guidelines to facilitate safe handling, storage, and disposal of chemical substances used in the procurement and integration of these components. This subcontract, issued under NAICS code 541620 by the Defense Logistics Agency within the Department of Defense, mandates compliance as a non-negotiable condition of performance. While specifics on location or point of contact are not provided, the obligation extends to all stages involving hazardous materials associated with connectors, and failure to deliver compliant labeling and SDS documentation could result in contract non-compliance. The posting date indicates this requirement is active for future performance beginning in 2026.

Environmental Consulting Services

POSTED

about 18 hours ago

DEADLINE

Quality Assurance and Inspection ServicesThe contract requires the performance of zero-defect quality inspections using either MIL-STD-1916 or ASQ H1331 sampling methods to verify that all delivered products meet the stringent acceptance standards of the Defense Logistics Agency. These inspections are critical to ensuring full conformance and are conducted to support DLA’s mission of reliably supplying defense systems and materiel with no tolerance for nonconformities. The work is classified under NAICS code 541330, indicating it falls within the professional, scientific, and technical services sector, specifically in the realm of quality assurance and inspection. The contract is structured as a subcontract and is tied directly to DLA operations under the Department of Defense, with performance expected to align precisely with federal quality benchmarks without deviation. All activities must be executed to guarantee that every unit received by DLA is fully compliant, with no room for defective or nonconforming product acceptance.

Engineering Services

POSTED

about 18 hours ago

DEADLINE

Packaging and Marking of Military-Grade ComponentsThe contract requires the provision of packaging and marking services for electrical connectors in strict compliance with MIL-STD-2073-1E for packaging standards and MIL-STD-129 for item marking, all in support of the Defense Logistics Agency. The components are destined for military use under the Department of Defense and must meet exacting federal specifications to ensure durability, traceability, and logistical compatibility across the defense supply chain. The work is structured as a subcontract under NAICS code 423840, which pertains to wholesale trade of electronic components and equipment, indicating the scope is focused on preparation and shipment readiness rather than manufacturing. Performance is expected to align with DLA’s standards for federal supply systems, though no specific location for performance or point of contact is listed. The solicitation is posted under contract SPE7M126V050N and was published on July 20, 2026, with no set-aside provisions indicated, meaning it is open to all qualified subcontractors. Full adherence to military standards is critical, as non-compliance could result in rejection of shipments, delays in delivery, or financial penalties. All packaging must preserve the integrity of the connectors during transport and storage, while marking must include universally recognized DOD identifiers, barcodes, and data matrix codes to enable automated receipt and inventory management at military depots worldwide.

Industrial Supplies Merchant Wholesalers

POSTED

about 18 hours ago

DEADLINE

Supply of Electrical Plug Connectors (MS3406D40-56P / NSN 5935011427787)The contract entails the manufacture and supply of 43 military-spec electrical plug connectors specified as MS3406D40-56P with the NSN 5935011427787, all of which must fully comply with applicable MIL standards to ensure reliability and interoperability in defense systems. The item is critical for military applications requiring high-performance electrical connections under demanding environmental and operational conditions. This is a subcontract issued under the authority of the Defense Logistics Agency within the Department of Defense, with a posting date of July 20, 2026, indicating it is part of a broader procurement effort managed through the DLA’s contracting system. The NAICS code 334417 confirms the scope falls within the aerospace and electronic component manufacturing sector. Performance location and specific delivery details are not yet defined, and no set-aside provisions are indicated, meaning the contract is open to all eligible contractors. The sole point of reference for award and tracking purposes is the DIBBS system under contract number SPE7M126V050N.

Electronic Connector Manufacturing

POSTED

about 18 hours ago

DEADLINE

Domestic Freight and Delivery to DLA DepotTwo reconditioned circuit card assemblies must be transported from the rework facility to the DLA Distribution Depot in Tracy, California, with delivery required no later than August 19, 2026. The shipment is governed by FOB Origin terms, meaning the buyer assumes all risk and responsibility for the goods once they leave the rework facility. The contract falls under NAICS code 484220, indicating it is a domestic freight transportation service, and is classified as a subcontract within the Department of Defense framework. The Defense Logistics Agency is the contracting organization, and the work is being performed under solicitation SPE4A626PX555, with the opportunity posted on July 20, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 18 hours ago

DEADLINE

Supply Chain Traceability and Documentation ServicesThe contract requires the compilation and verification of detailed documentation to establish the prior government ownership and reconditioning history of surplus electronic items, ensuring full compliance with federal requirements prior to submission. This work is critical for maintaining the integrity and traceability of the defense supply chain, as accurate records are necessary to confirm legal and regulatory adherence throughout the lifecycle of the equipment. The contractor must rigorously authenticate provenance and reconditioning data to support transparency and accountability in the disposition process. This subcontract is part of a larger effort managed by the Defense Logistics Agency under the Department of Defense, aligning with NAICS code 541611 for management consulting services. The project involves meticulous record gathering, validation, and formatting to meet stringent government standards, with no specific location specified for performance. The solicitation was posted in July 2026 and is tied to contract SPE4A626PX555, indicating its role within an established procurement pathway for supporting defense logistics operations.

Administrative Management and General Management Consulting Services

POSTED

about 18 hours ago

DEADLINE

Inspection, Packaging, and Marking of Reconditioned ElectronicsThe contract pertains to the final inspection, preservation, packaging, and labeling of reconditioned circuit card assemblies to ensure full compliance with military packaging and marking standards. This effort is critical to maintaining the integrity, functionality, and traceability of electronic components used in defense systems, requiring strict adherence to established federal and military specifications throughout every phase of handling. The work involves detailed quality control procedures to verify that each assembly meets performance criteria prior to being preserved against environmental degradation, securely packaged, and accurately labeled in accordance with mandated military protocols. This subcontract is issued under the Department of Defense, specifically managed by the Defense Logistics Agency, and falls under the NAICS code 493190 for other warehousing and storage. The solicitation was posted on July 20, 2026, and the place of performance is not specified, suggesting the work may be conducted at any approved contractor facility capable of meeting the rigorous defense standards. The contract's purpose is to support the sustainment and readiness of military electronics by ensuring that reconditioned components are handled, stored, and shipped with the same precision and reliability as new units, thereby reinforcing the logistical backbone of defense operations.

Other Warehousing and Storage

POSTED

about 18 hours ago

DEADLINE

Reconditioning of Government Surplus Circuit Card AssembliesThe contract entails the reconditioning of government surplus circuit card assemblies to restore them to original technical specifications and military standards for reuse. This involves the systematic replacement of expired or degraded components, thorough functional testing to ensure operational integrity, and adherence to all applicable military performance and reliability requirements. The work must be performed with precision to guarantee that the returned assemblies meet the identical functional and environmental criteria as newly manufactured units, ensuring they are fully viable for military systems and platforms. This subcontract is issued under the Defense Logistics Agency within the Department of Defense and falls under NAICS code 334418 for electronic component and product manufacturing. The solicitation was posted on July 20, 2026, and the performance location and point of contact details are not specified, though the work is tied to DLA’s broader initiative to extend the life cycle of critical electronic assets. The contractor is expected to deliver reconditioned assemblies that are fully compliant, documented, and ready for immediate integration into defense systems without the need for additional modification or qualification.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 18 hours ago

DEADLINE

Cybersecurity Compliance (CMMC Level 2)The contract requires the implementation and ongoing maintenance of NIST SP 800-171 security controls to protect covered defense information, ensuring alignment with the Defense Federal Acquisition Regulation Supplement (DFARS) 252.204-7012. This includes establishing robust cyber incident reporting procedures to meet federal requirements for timely disclosure of security breaches involving sensitive defense data. The work must support compliance at the Cybersecurity Maturity Model Certification Level 2 standard, which demands a structured approach to cybersecurity readiness, documentation, and continuous monitoring across the organization’s information systems. The effort is classified as a subcontract under the Department of Defense, specifically managed by the Defense Logistics Agency, and falls under the NAICS code for computer systems design and related services. Performance is expected to be carried out in support of federal defense operations, with no geographic restrictions specified.

Computer Systems Design Services

POSTED

about 18 hours ago

DEADLINE