Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Aerospace Component Precision Machining

Active

Federal

Response Deadline11/09/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Aerospace Component Precision Machining involves the final machining, drilling, and finishing of No. 4 bearing breather tube shields for DLA Weapons Support. The selected contractor must execute precision machining according to RTX Corporation part number 481080, ensuring physical identification and bare item marking comply with RQ017. Final inspections must be conducted in accordance with MIL-STD-1916 or ASQ H1331 to deliver fully finished and inspected heat shields. The project requires the use of CNC milling and turning centers and mandates that the provider holds SAE AS9003 or ISO 9001 certification along with a CMMC Level 2 Self-Assessment. Performance will take place at Tinker AFB. Interested parties must respond by November 9, 2026, for this Department of Defense requirement categorized under NAICS code 332710.

General Info

Precision machining of bearing breather tube shields for DLA Weapons Support at Tinker AFB.

Agency

Department Of Defense → DLA WEAPONS SUPPORT SMSG AVIATION SUP CH CORPORATE LTC

NAICS

332710 - Machine Shops

Place of Performance

TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4AX-27-T-0007.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SHIELD, HEAT, AIRCRAFT G

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 2

subcontract

Response DeadlineNov 9

Submission deadline

Response Deadline

11/09/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT SMSG AVIATION SUP CH CORPORATE LTC

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT SMSG AVIATION SUP CH CORPORATE LTC

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs final machining, drilling, and finishing for prime contractors on DLA Weapons Support projects, here a No. 4 bearing breather tube shield. Executes precision machining to RTX Corporation part number 481080, physical identification and bare item marking per RQ017, and final inspection per MIL-STD-1916 or ASQ H1331. Requires CNC milling/turning centers. Must be SAE AS9003 or ISO 9001 certified with CMMC Level 2 Self-Assessment. Delivers finished, inspected heat shields.

Similar Contracts

Same NAICS industry code

Precision Fabrication of Angle Brackets (NSN 5340-00-810-7046)This subcontract involves the precision fabrication of 134 angle brackets under NSN 5340-00-810-7046 for the Department of Defense, specifically supporting DLA Weapons Support SMSG Aviation Supply Chain projects. The manufacturer must adhere strictly to Government Design Control Activity specifications and ensure all units are marked, labeled, and packaged in accordance with MIL-STD-129 and ASTM D3951 standards. Performance of this contract requires the provider to hold JCP certification and maintain ITAR/EAR approval. The final deliverable consists of 134 finished and packaged brackets to be associated with operations at Tinker AFB. Interested parties must respond by November 9, 2026.

DLA WEAPONS SUPPORT SMSG AVIATION SUP CH CORPORATE LTC

POSTED

about 3 hours ago

DEADLINE

Precision Machining/Manufacturing of Bearing Retaining Nuts (CSI)This subcontract involves the precision machining and manufacturing of three high-precision bearing retaining nuts, identified by NSN 5310-00-771-1489, for the Department of Defense under the DLA Weapons Support SMSG Aviation Supply Chain. The project requires strict adherence to Technical Data TDP Rev A Gen 1 and Air Force Critical Safety Item standards, with performance taking place at Tinker AFB. To qualify, the manufacturer must possess SAE AS9100 quality management certification and hold a Joint Certification Program certification to handle export-controlled data. The contract is categorized under NAICS code 332710 and requires specialized CNC machining capabilities to meet the rigorous safety and technical specifications of the aviation supply chain.

DLA WEAPONS SUPPORT SMSG AVIATION SUP CH CORPORATE LTC

POSTED

about 3 hours ago

DEADLINE

Precision Fabrication of Metal Tube Assemblies (CSI)This subcontract involves the precision fabrication of 14 flight-critical metal tube assemblies for prime contractors supporting DLA Weapons Support aviation supply contracts. Work must be performed at Tinker AFB using traditional subtractive machining and forming methods in strict accordance with Drawing NR 77445 822837 and TDP Rev A Gen 1, with a specific prohibition against the use of additive manufacturing. To be eligible, the contractor must maintain AS9100 certification, CMMC Level 2 compliance, and JCP certification for the handling of ITAR data. The project falls under NAICS code 332710 and requires the delivery of fully completed and inspected assemblies.

DLA WEAPONS SUPPORT SMSG AVIATION SUP CH CORPORATE LTC

POSTED

about 3 hours ago

DEADLINE

Supply of Pipe Unions (NSN 4730-01-161-6270)This subcontract involves the procurement of 190 pipe unions for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Fluid Handling Division. The contractor is responsible for manufacturing or sourcing these components to strictly adhere to the material and dimensional specifications of NSN 4730-01-161-6270, with a mandatory requirement that all materials be free of mercury or mercury-containing compounds. The project falls under NAICS code 332710 and will be performed at Tinker AFB. Interested parties must respond by November 13, 2026, to provide the required quantity of pipe unions meeting all technical specifications.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

Supplier of Mounting Plate (NSN 5945012973355)This subcontract involves the manufacture or sourcing of a specific mounting plate identified by NSN 5945012973355 for prime contractors supporting the Defense Logistics Agency Weapons Support Maritime Supply Chain. The selected supplier is responsible for delivering one mounting plate that adheres to strict military and industry specifications, including packaging per RP001 and marking requirements according to IPC/JEDEC J-STD-609 and MIL-STD-129. The opportunity falls under NAICS code 332710 and is managed by the Department of Defense. Interested parties must respond by November 13, 2026, for performance located at FPO 09591.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

Manufacture of Item 01-088-6580This subcontract with C and T Supply Chain, under the Department of Defense, requires the manufacture of 5,000 units of part number 01-088-6580 for prime contractors supporting DLA supply contracts. The scope of work includes the fabrication and assembly of components in strict accordance with government technical drawings and specifications, falling under NAICS code 332710. The contractor is responsible for performing all necessary quality control and inspections to ensure adherence to technical standards, while providing comprehensive material certifications and process operation sheets. Performance will take place in zip code 85043, with a response deadline set for November 11, 2026.

C AND T SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

Manufacturer/Supplier of Plug Assembly, Sealing (NSN 5340-01-474-8186)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

Precision Machining of Regulator Manifold

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

Precision Retaining Ring Supplier (NSN 5325-00-954-5937)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

Manufacture of Compression Sleeves (NSN 4730-01-176-9303)

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

Manufacturing of Brazing Tube Fitting Ferrules

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 3 hours ago

DEADLINE

Steering Gear Arm Fabrication

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 3 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT SMSG AVIATION SUP CH CORPORATE LTC

Same awarding agency

Manufacturing of Combustion Chamber Plates (NSN 2840-01-159-6767)This subcontract involves the manufacture and supply of 540 precision-engineered combustion chamber plates, identified as NSN 2840-01-159-6767, for prime contractors supporting the Department of Defense DLA Weapons Support SMSG Aviation Supply Chain. The work requires precision machining and forming to aerospace tolerances using CNC equipment, with performance taking place at Tinker AFB. The contractor must maintain strict adherence to quality standards, specifically SAE AS9003 or ISO 9001, and utilize MIL-STD-1916 or ASQ H1331 sampling plans. Additionally, the provider must ensure full compliance with the Buy American Act and meet CMMC Level 2 cybersecurity requirements.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 3 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services involves providing specialized packaging and marking for prime contractors supporting DLA aviation supply contracts. The scope of work requires the packaging of items according to ASTM D3951 and marking in compliance with MIL-STD-129. Additionally, the provider must implement DLA Master List requirements RP001 and RQ017 to ensure proper physical identification and bare item marking. The specific deliverable for this contract consists of 29 units of tube assemblies, which must be packed and labeled for shipment to the DLA Distribution Depot Oklahoma. Performance will take place at Tinker AFB, and the project falls under NAICS code 561910 for the Department of Defense.

Packaging and Labeling Services

POSTED

about 3 hours ago

DEADLINE

Precision Manufacturing of Metal Tube AssembliesThis subcontract involves the precision manufacturing of 29 metal tube assemblies for the Department of Defense, specifically supporting DLA aviation supply contracts. The fabrication must strictly follow TDP Rev A Gen 1 and RTX Corporation part numbers 458123 and 646787, while adhering to Reference QAP 77445 MQR-PSD-1. A zero non-conformance policy is in effect, and the use of additive manufacturing is strictly prohibited for these components. The contractor is required to maintain CMMC Level 2 and NIST SP 800-171 compliance to ensure data security. Performance will take place at Tinker AFB, with the final deliverable consisting of 29 completed and inspected aviation tube assemblies. The solicitation was posted on November 2, 2026, with a response deadline of November 9, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

Supply of Aviation-Grade Raw Material for Angle BracketsThis subcontract involves the supply of certified aviation-grade raw metal stock for the production of angle brackets under the DLA Weapons Support SMSG Aviation Supply Chain. The provider is responsible for sourcing alloys that strictly adhere to Government Design Control Activity specifications and ensuring all materials are delivered directly to the fabricator. To maintain regulatory compliance, the supplier must provide Material Test Reports and Certificates of Conformance in accordance with DFARS Buy American Act requirements. The project is managed by the Department of Defense with the place of performance located at Tinker AFB.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 3 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract involves providing military-grade packaging and marking services for critical aircraft engine components supporting DLA Weapons Support projects. The contractor is responsible for ensuring all items are processed in strict accordance with MIL-STD-2073-1E and MIL-STD-129, specifically adhering to preservation method 10 and cleaning and drying requirement 1. The use of MIL-SPEC packaging materials and specialized marking equipment is mandatory to meet these standards. The final deliverables consist of packaged and marked components prepared for FOB Origin shipment to Tinker AFB. This requirement is managed under NAICS code 561910 for the Department of Defense, specifically the DLA Weapons Support SMSG Aviation Supply Chain organization.

Packaging and Labeling Services

POSTED

about 3 hours ago

DEADLINE

Aircraft Engine Heat Shield Casting/ForgingThis subcontract involves the casting or forging of metal heat shield blanks for the No. 4 bearing breather tube, supporting DLA Weapons Support projects. The contractor must produce these critical application items in accordance with RTX Corporation part number 481080 specifications. Due to the technical nature of the work, the provider is required to possess specialized tooling and high-temperature alloy casting or forging equipment. Compliance requirements include mandatory SAE AS9003 or ISO 9001 certification and a CMMC Level 2 Self-Assessment. The project is managed under the Department of Defense through the DLA Weapons Support SMSG Aviation Supply Chain organization, with the place of performance located at Tinker AFB. Interested parties must adhere to the response deadline of November 9, 2026.

Rolled Steel Shape Manufacturing

POSTED

about 3 hours ago

DEADLINE

Aerospace-Grade Raw Material Supply (Berry Amendment Compliant)This subcontract involves the supply of aerospace-grade raw alloys or bar stock to prime contractors supporting DLA Weapons Support SMSG Aviation Supply Chain projects. The provider must deliver certified materials that strictly adhere to the chemical and physical properties outlined in TDP Rev A Gen 1. To ensure quality and regulatory adherence, the contract requires full material traceability, the provision of Mill Test Reports, and strict compliance with the Berry Amendment and the Buy American Act. The project is managed under the Department of Defense for the DLA Weapons Support SMSG Aviation Supply Chain Corporate LTC, with the place of performance located at Tinker AFB. Interested parties must respond by November 9, 2026, regarding this requirement categorized under NAICS code 336413. The primary objective is the reliable delivery of certified raw material stock directly to the manufacturer.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports the Department of Defense, specifically the DLA Weapons Support aviation supply chain. The contractor is responsible for providing specialized packaging and marking for prime contractors, ensuring all components are processed according to MIL-STD-2073-1E, RP001, and MIL-STD-129 standards. Key tasks include applying lot and serial numbers and CAGE codes using industrial marking equipment and anti-corrosion materials to deliver shipment-ready goods. The project requires strict adherence to DFARS 252.223-7001 compliance and will be performed at Tinker AFB. This opportunity falls under NAICS code 488410, with a response deadline of November 9, 2026.

Motor Vehicle Towing

POSTED

about 3 hours ago

DEADLINE

Manufacturing of Spur Gears (Critical Safety Item)This subcontract involves the manufacture and delivery of 16 spur gears to support DLA Weapons Support aviation supply chain projects. The components must be produced to match RTX Corporation part number 820462, adhering strictly to TDP Rev A Gen 1, QAP 13873 QAP-E09 Rev A, and QAP 77445 MQR-PSD-1 Rev 2. Due to the technical nature of the project, the contractor is required to utilize precision gear cutting and grinding equipment. As these components are designated as Critical Safety Items, the provider must hold CSI certification and submit a CMMC Level 2 self-assessment. The work is associated with the Department of Defense and is designated for performance at Tinker AFB. Interested parties must respond by November 9, 2026.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 3 hours ago

DEADLINE

Specialized Aviation Finishing and NDT TestingThis subcontract for Specialized Aviation Finishing and NDT Testing supports DLA Weapons Support aviation supply contracts through the provision of surface treatments, coatings, and non-destructive testing. The contractor is responsible for applying finishes and performing inspections according to Drawing 77445 822837 to ensure the integrity of Critical Safety Items. All finished assemblies must be delivered alongside comprehensive test reports. The work will be performed at Tinker AFB and requires strict adherence to industry and federal standards, including NADCAP accreditation and compliance with DFARS 252.223-7001 regarding hazardous materials. This opportunity falls under NAICS code 332813 and is managed by the Department of Defense.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 3 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Manufacture of Flexible Shaft Couplings (NSN 014988475)

Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

Supply of Specialized Hydrophone Components

Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

Vent Plug Assembly Manufacturing

Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

Precision Shim Set Fabrication (NSN 1HM 5365-01-253-0629)

Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

Manufacture of Front Mounting Plates (NSN 6680-00-075-4106)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacture of Sleeve Spacer (NSN 5365-01-727-8638)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacturing of BRACKET, DA-129-131

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS