Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Precision Manufacturing of Metal Tube Assemblies

Active

Federal

Response Deadline11/09/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the precision manufacturing of 29 metal tube assemblies for the Department of Defense, specifically supporting DLA aviation supply contracts. The fabrication must strictly follow TDP Rev A Gen 1 and RTX Corporation part numbers 458123 and 646787, while adhering to Reference QAP 77445 MQR-PSD-1. A zero non-conformance policy is in effect, and the use of additive manufacturing is strictly prohibited for these components. The contractor is required to maintain CMMC Level 2 and NIST SP 800-171 compliance to ensure data security. Performance will take place at Tinker AFB, with the final deliverable consisting of 29 completed and inspected aviation tube assemblies. The solicitation was posted on November 2, 2026, with a response deadline of November 9, 2026.

General Info

Manufacture 29 metal tube assemblies for DoD following strict specifications and security standards.

Agency

Department Of Defense → DLA WEAPONS SUPPORT SMSG AVIATION SUP CH CORPORATE LTC

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing

Place of Performance

TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4AX-27-T-0005.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

TUBE ASSEMBLY, METAL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 2

subcontract

Response DeadlineNov 9

Submission deadline

Response Deadline

11/09/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT SMSG AVIATION SUP CH CORPORATE LTC

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT SMSG AVIATION SUP CH CORPORATE LTC

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures Metal Tube Assemblies for prime contractors on DLA aviation supply contracts. Fabricates 29 units per TDP Rev A Gen 1 and RTX Corporation P/N 458123 and 646787. Adheres to Reference QAP 77445 MQR-PSD-1 and zero non-conformance policies. Requires CMMC Level 2 and NIST SP 800-171 compliance. Additive manufacturing prohibited. Delivers 29 completed, inspected aviation tube assemblies.

Similar Contracts

Same NAICS industry code

Aerospace Grade Alloy/Composite SupplyThis subcontract, titled Aerospace Grade Alloy/Composite Supply, is a total small business set-aside issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div. The contract involves the procurement of raw aerospace materials for prime contractors, specifically requiring compliance with specification 81205 BMS5-28AN and TDP Rev D Gen 4 standards. Performance will take place at Robins Air Force Base, with the supplier responsible for delivering certified raw materials directly to the fabricator. To ensure strict quality control and traceability, the supplier must provide full material certifications and Mill Test Reports. Additionally, because the project involves sensitive defense technology, the contractor is required to have the necessary approvals to handle ITAR and EAR controlled materials. The solicitation was posted on November 2, 2026, with a response deadline of November 10, 2026, falling under NAICS code 336413.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

Precision Aircraft Panel ManufacturingThe Precision Aircraft Panel Manufacturing subcontract involves the fabrication of structural aircraft panels for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires subtractive or formative manufacturing in strict accordance with Basic Drawing 98897 4F75009 and Reference Drawings 98897 STM22-506 and 98897 DS30000. The selected provider is responsible for delivering finished panels and completing First Article Testing for units delivered to Robins Air Force Base. This opportunity is a total small business set-aside under NAICS code 336413. To be eligible, contractors must maintain CMMC Level 2 and US/Canada JCP certifications, as well as compliance with SAE AS9003 or ISO 9001 standards. The project is managed by the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place at Robins AFB.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

Aviation Wire Rope Assembly Fabrication (P/N BACC13AM4D1190)This subcontract involves the fabrication of a single-leg aviation wire rope assembly, part number BACC13AM4D1190, for prime contractors supporting DLA Weapons Support ASC projects. The manufacturer is required to produce the assembly using precision swaging and crimping equipment in strict accordance with Basic Drawing 81205 BACC13AM Revision L and QAP 13873 QAP-020 Revision A. To be eligible, the provider must hold AS9100 certification and possess either source approval or a completed SAR package. The opportunity is designated as a total small business set-aside under NAICS code 336413 for the Department of Defense. The scope of work culminates in the delivery of one completed and tested assembly. Interested parties must respond by November 16, 2026, to meet the requirements set forth by the DLA Weapons Support ASC Supplier Oper AE and AF Division.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

Manufacturing of Grooved Clamp Couplings (NSN 010461421)This subcontract involves the manufacture of grooved clamp couplings, specifically Part Number BACC10EY400BE, for prime contractors supporting DLA Weapons Support ASC aerospace projects. The production must adhere to Basic Drawing NR 81205 BACC10EY Revision V and TDP Rev A Gen 1, utilizing precision machining to ensure all components meet Boeing Aerospace Company Standard tolerances. The Department of Defense requires that all finished couplings be marked and packaged in accordance with MIL-STD-129 and MIL-STD-2073-1E standards. Delivery of the completed parts is designated as FOB Origin. The opportunity is categorized under NAICS code 336413, with a response deadline set for December 2, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

Aerospace-Grade Raw Material Supply (Berry Amendment Compliant)This subcontract involves the supply of aerospace-grade raw alloys or bar stock to prime contractors supporting DLA Weapons Support SMSG Aviation Supply Chain projects. The provider must deliver certified materials that strictly adhere to the chemical and physical properties outlined in TDP Rev A Gen 1. To ensure quality and regulatory adherence, the contract requires full material traceability, the provision of Mill Test Reports, and strict compliance with the Berry Amendment and the Buy American Act. The project is managed under the Department of Defense for the DLA Weapons Support SMSG Aviation Supply Chain Corporate LTC, with the place of performance located at Tinker AFB. Interested parties must respond by November 9, 2026, regarding this requirement categorized under NAICS code 336413. The primary objective is the reliable delivery of certified raw material stock directly to the manufacturer.

DLA WEAPONS SUPPORT SMSG AVIATION SUP CH CORPORATE LTC

POSTED

about 1 hour ago

DEADLINE

Precision Aerospace Component Manufacturing (Assembly)This subcontract for Precision Aerospace Component Manufacturing involves the final fabrication and assembly of 14 Bracket Assemblies, specifically the Actuator Mechanism for Lower, for the DLA Weapons Support ASC. All work must be performed according to Boeing P/N 114S2845-1 specifications and adhere to Critical Application Item standards for component integration. The project is managed under the Department of Defense and requires the contractor to maintain SAE AS9003 or ISO 9001 quality systems along with CMMC Level 2 certification. Performance will take place in New Cumberland, Pennsylvania, with a response deadline set for November 10, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

Precision Machining and Fabrication of Telescoping Tube GuardThis subcontract involves the precision machining and fabrication of a Boom Telescoping Tube Guard for prime contractors supporting DLA Weapons Support ASC projects. The selected provider must manufacture one completed unit according to Drawing NR 13873 006207550-20071 and all Technical Data Package specifications, utilizing high-precision CNC centers and metrology equipment to maintain strict tolerances of +/- 0.005 inches. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 336413 for the Department of Defense. To be eligible, contractors must hold CMMC Level 2, ISO 9001:2015, and JCP certifications. The solicitation was posted on November 2, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

Supply of Air Conditioning Duct Assembly (NSN 1660-01-037-2026)This subcontract, issued by the Department of Defense through the DLA Weapons Support ASC, requires the fabrication and supply of two air conditioning duct assemblies under NSN 1660-01-037-2026. The work must be performed in strict accordance with Reference Drawing NR 81205 BAC5300-2 (Rev H) and 81205 204-67227 (Rev DTD 01/23/2023). To ensure compliance with BAC standards, the contractor must utilize aviation-grade tooling and materials and provide certification of domestic origin. The project is designated as a Total Small Business Set-Aside under NAICS code 336413, with the place of performance located at Tinker AFB. Interested parties must respond by November 10, 2026, to provide the two completed duct assemblies as specified in the technical requirements.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

Manufacturing of Aircraft Electrostatic Dischargers (NSN 5920-00-271-3217)This subcontract involves the manufacturing of aircraft electrostatic dischargers, specifically NSN 5920-00-271-3217, for the DLA Weapons Support Maritime Supply Chain. The contractor is responsible for fabricating these units using precision machining and aviation-grade materials in strict accordance with approved technical data packages provided by Boeing, Northrop Grumman, or Dayton-Granger, Inc. All production must adhere to the DLA quality requirement RA001 to ensure the components are capable of proper electrostatic discharge. The opportunity is designated as a HUBZone set-aside under NAICS code 336413. Interested parties must respond by November 17, 2026, to provide the finished units required by the Department of Defense.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

Specialized Aerospace Packaging & LogisticsThe Specialized Aerospace Packaging and Logistics subcontract involves providing MIL-SPEC packaging and marking services for prime contractors delivering aircraft parts to the DLA Weapons Support ASC. The scope of work requires packing components according to MIL-STD-2073-1E using Unit and Intermediate Container E5, with all shipments marked in accordance with MIL-STD-129. Additionally, the contractor must ensure that all preservation methods adhere to QUP:001 and WRAP MAT:CA standards to prepare components for delivery to the DLA Distribution Depot Oklahoma. This Department of Defense requirement falls under NAICS code 336413 and is managed by the DLA Weapons Support ASC Supplier Oper AE and AF Div. The performance of the contract is centered in zip code 73145-8000. Interested parties should note the response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

Precision Fabrication of Aircraft Access CoversThis subcontract involves the precision fabrication of seven aircraft access covers for prime contractors supporting DLA Weapons Support ASC contracts. The project requires machining part number 232T1424-385 in strict accordance with Boeing Technical Data Package Rev A Gen 1. Quality assurance must be maintained through sampling per MIL-STD-1916 or ASQ H1331, and the final deliverables must be fully certified and completed. Critical compliance requirements include obtaining FAA Airworthiness Approval per CDRL RQ019 and adhering to QAP 13873. The contract is managed under NAICS code 336413 for the Department of Defense, with performance taking place in zip code 73145-8000. Responses to the solicitation are due by November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

Manufacturing of Block Clamps (Boeing P/N 270T0005-212)This subcontract involves the manufacture and supply of four finished Block Clamps for prime contractors supporting DLA Weapons Support ASC aerospace projects. The contractor is responsible for fabricating components to Boeing P/N 270T0005-212 specifications for critical applications, adhering strictly to Procurement Note L32 and maintaining precision machining for aerospace tolerances. Quality assurance is a primary requirement, with sampling and inspection conducted according to MIL-STD-1916 or MIL-STD-105/ASQ Z1.4. Additionally, the provider must complete a CMMC Level 2 self-assessment to ensure cybersecurity compliance. The project falls under NAICS code 336413 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT SMSG AVIATION SUP CH CORPORATE LTC

Same awarding agency

Manufacturing of Combustion Chamber Plates (NSN 2840-01-159-6767)This subcontract involves the manufacture and supply of 540 precision-engineered combustion chamber plates, identified as NSN 2840-01-159-6767, for prime contractors supporting the Department of Defense DLA Weapons Support SMSG Aviation Supply Chain. The work requires precision machining and forming to aerospace tolerances using CNC equipment, with performance taking place at Tinker AFB. The contractor must maintain strict adherence to quality standards, specifically SAE AS9003 or ISO 9001, and utilize MIL-STD-1916 or ASQ H1331 sampling plans. Additionally, the provider must ensure full compliance with the Buy American Act and meet CMMC Level 2 cybersecurity requirements.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 1 hour ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services involves providing specialized packaging and marking for prime contractors supporting DLA aviation supply contracts. The scope of work requires the packaging of items according to ASTM D3951 and marking in compliance with MIL-STD-129. Additionally, the provider must implement DLA Master List requirements RP001 and RQ017 to ensure proper physical identification and bare item marking. The specific deliverable for this contract consists of 29 units of tube assemblies, which must be packed and labeled for shipment to the DLA Distribution Depot Oklahoma. Performance will take place at Tinker AFB, and the project falls under NAICS code 561910 for the Department of Defense.

Packaging and Labeling Services

POSTED

about 1 hour ago

DEADLINE

Supply of Aviation-Grade Raw Material for Angle BracketsThis subcontract involves the supply of certified aviation-grade raw metal stock for the production of angle brackets under the DLA Weapons Support SMSG Aviation Supply Chain. The provider is responsible for sourcing alloys that strictly adhere to Government Design Control Activity specifications and ensuring all materials are delivered directly to the fabricator. To maintain regulatory compliance, the supplier must provide Material Test Reports and Certificates of Conformance in accordance with DFARS Buy American Act requirements. The project is managed by the Department of Defense with the place of performance located at Tinker AFB.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 1 hour ago

DEADLINE

Precision Fabrication of Angle Brackets (NSN 5340-00-810-7046)This subcontract involves the precision fabrication of 134 angle brackets under NSN 5340-00-810-7046 for the Department of Defense, specifically supporting DLA Weapons Support SMSG Aviation Supply Chain projects. The manufacturer must adhere strictly to Government Design Control Activity specifications and ensure all units are marked, labeled, and packaged in accordance with MIL-STD-129 and ASTM D3951 standards. Performance of this contract requires the provider to hold JCP certification and maintain ITAR/EAR approval. The final deliverable consists of 134 finished and packaged brackets to be associated with operations at Tinker AFB. Interested parties must respond by November 9, 2026.

POSTED

about 1 hour ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract involves providing military-grade packaging and marking services for critical aircraft engine components supporting DLA Weapons Support projects. The contractor is responsible for ensuring all items are processed in strict accordance with MIL-STD-2073-1E and MIL-STD-129, specifically adhering to preservation method 10 and cleaning and drying requirement 1. The use of MIL-SPEC packaging materials and specialized marking equipment is mandatory to meet these standards. The final deliverables consist of packaged and marked components prepared for FOB Origin shipment to Tinker AFB. This requirement is managed under NAICS code 561910 for the Department of Defense, specifically the DLA Weapons Support SMSG Aviation Supply Chain organization.

Packaging and Labeling Services

POSTED

about 1 hour ago

DEADLINE

Aerospace Component Precision MachiningThis subcontract for Aerospace Component Precision Machining involves the final machining, drilling, and finishing of No. 4 bearing breather tube shields for DLA Weapons Support. The selected contractor must execute precision machining according to RTX Corporation part number 481080, ensuring physical identification and bare item marking comply with RQ017. Final inspections must be conducted in accordance with MIL-STD-1916 or ASQ H1331 to deliver fully finished and inspected heat shields. The project requires the use of CNC milling and turning centers and mandates that the provider holds SAE AS9003 or ISO 9001 certification along with a CMMC Level 2 Self-Assessment. Performance will take place at Tinker AFB. Interested parties must respond by November 9, 2026, for this Department of Defense requirement categorized under NAICS code 332710.

POSTED

about 1 hour ago

DEADLINE

Aircraft Engine Heat Shield Casting/ForgingThis subcontract involves the casting or forging of metal heat shield blanks for the No. 4 bearing breather tube, supporting DLA Weapons Support projects. The contractor must produce these critical application items in accordance with RTX Corporation part number 481080 specifications. Due to the technical nature of the work, the provider is required to possess specialized tooling and high-temperature alloy casting or forging equipment. Compliance requirements include mandatory SAE AS9003 or ISO 9001 certification and a CMMC Level 2 Self-Assessment. The project is managed under the Department of Defense through the DLA Weapons Support SMSG Aviation Supply Chain organization, with the place of performance located at Tinker AFB. Interested parties must adhere to the response deadline of November 9, 2026.

Rolled Steel Shape Manufacturing

POSTED

about 1 hour ago

DEADLINE

Precision Machining/Manufacturing of Bearing Retaining Nuts (CSI)This subcontract involves the precision machining and manufacturing of three high-precision bearing retaining nuts, identified by NSN 5310-00-771-1489, for the Department of Defense under the DLA Weapons Support SMSG Aviation Supply Chain. The project requires strict adherence to Technical Data TDP Rev A Gen 1 and Air Force Critical Safety Item standards, with performance taking place at Tinker AFB. To qualify, the manufacturer must possess SAE AS9100 quality management certification and hold a Joint Certification Program certification to handle export-controlled data. The contract is categorized under NAICS code 332710 and requires specialized CNC machining capabilities to meet the rigorous safety and technical specifications of the aviation supply chain.

POSTED

about 1 hour ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports the Department of Defense, specifically the DLA Weapons Support aviation supply chain. The contractor is responsible for providing specialized packaging and marking for prime contractors, ensuring all components are processed according to MIL-STD-2073-1E, RP001, and MIL-STD-129 standards. Key tasks include applying lot and serial numbers and CAGE codes using industrial marking equipment and anti-corrosion materials to deliver shipment-ready goods. The project requires strict adherence to DFARS 252.223-7001 compliance and will be performed at Tinker AFB. This opportunity falls under NAICS code 488410, with a response deadline of November 9, 2026.

Motor Vehicle Towing

POSTED

about 1 hour ago

DEADLINE

Manufacturing of Spur Gears (Critical Safety Item)This subcontract involves the manufacture and delivery of 16 spur gears to support DLA Weapons Support aviation supply chain projects. The components must be produced to match RTX Corporation part number 820462, adhering strictly to TDP Rev A Gen 1, QAP 13873 QAP-E09 Rev A, and QAP 77445 MQR-PSD-1 Rev 2. Due to the technical nature of the project, the contractor is required to utilize precision gear cutting and grinding equipment. As these components are designated as Critical Safety Items, the provider must hold CSI certification and submit a CMMC Level 2 self-assessment. The work is associated with the Department of Defense and is designated for performance at Tinker AFB. Interested parties must respond by November 9, 2026.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 1 hour ago

DEADLINE

Specialized Aviation Finishing and NDT TestingThis subcontract for Specialized Aviation Finishing and NDT Testing supports DLA Weapons Support aviation supply contracts through the provision of surface treatments, coatings, and non-destructive testing. The contractor is responsible for applying finishes and performing inspections according to Drawing 77445 822837 to ensure the integrity of Critical Safety Items. All finished assemblies must be delivered alongside comprehensive test reports. The work will be performed at Tinker AFB and requires strict adherence to industry and federal standards, including NADCAP accreditation and compliance with DFARS 252.223-7001 regarding hazardous materials. This opportunity falls under NAICS code 332813 and is managed by the Department of Defense.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 1 hour ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS