Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Aerospace Filter Manufacturer (NSN 4330-00-094-9096)

Active

Federal

Response Deadline11/12/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture and supply of seven certified filter units for E/I E-2C aircraft under the DLA Weapons Support Maritime Supply Chain. The contractor is responsible for producing components according to NSN 4330-00-094-9096 and strict Navy Critical Safety Item standards. Performance will take place in New Cumberland, Pennsylvania, with a focus on maintaining high-precision aerospace specifications. To ensure compliance, the manufacturer must hold SAE AS9100 certification and provide all necessary Source Approval Request documentation. The contract mandates strict adherence to the Buy American Act and Berry Amendment sourcing requirements, while explicitly prohibiting the use of unauthorized additive manufacturing.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

NAICS

336411 - Aircraft Manufacturing

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M1-27-T-1847.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

FILTER

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 1

subcontract

Response DeadlineNov 12

Submission deadline

Response Deadline

11/12/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies filters for prime contractors on DLA Weapons Support Maritime Supply Chain projects for E/I E-2C aircraft. Manufactures components per NSN 4330-00-094-9096 and Navy Critical Safety Item (CSI) standards. Adheres to Buy American Act and Berry Amendment sourcing; prohibits unauthorized additive manufacturing. Requires SAE AS9100 certification and Source Approval Request (SAR) documentation. Delivers 7 certified filter units.

Similar Contracts

Same NAICS industry code

Precision Machining and Fabrication of Airfoil RibThis subcontract involves the precision machining and fabrication of one Airfoil Rib for prime contractors supporting DLA Weapons Support ASC projects. The work must be performed in accordance with Reference Drawing 76823 and TDP Rev A Gen 1 specifications, with a strict prohibition on additive manufacturing unless specifically authorized by ESA. The final deliverable is a single finished airfoil rib that meets all established drawing specifications. To be eligible, the contractor must maintain an SAE AS9100 quality system and hold JCP certification to ensure secure access to export-controlled data. The project falls under NAICS code 336411 and is managed by the Department of Defense. Performance of the contract is located in New Cumberland, Pennsylvania.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

Solicitation # SPE7LX-27-U-0387

Solicitation SPE7LX-27-U-0387 is a Total Small Business Set-Aside issued by the DLA Weapons Support Strategic Acquisition Program Directorate for the procurement of gaskets under NSN 5330-01-456-7520. This request for quotation may result in a unilateral Indefinite Delivery Contract with a maximum value of 350,000.00 USD and an estimated annual quantity of 135 units. Quotations are due by November 16, 2026, with a required delivery timeline of 49 days. The contract is issued under the First Destination Transportation program, and while there is conflicting data, the schedule specifies FOB Origin. The contractor must adhere to strict technical and quality requirements found in the DLA Master List and follow specific packaging standards. Items must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117, Type II, Class C, Style 1 to prevent UV deterioration, with general packaging and marking complying with MIL-STD-2073-1E and MIL-STD-129. Additionally, the contract prohibits the use of Class I ozone-depleting chemicals and mandates compliance with ITAR and EAR export controls for technical data. Administrative requirements include the use of Wide Area WorkFlow for invoicing and adherence to the Buy American Act and DFARS cybersecurity standards.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 1 hour ago

DEADLINE

Solicitation # SPE4A7-27-T-2475

Solicitation SPE4A7-27-T-2475 is a fixed-price procurement issued by the DLA Weapons Support ASC for one unit of an Air Force Critical Safety Item, specifically a RIB, AIRFOIL (NSN 1560000076613). The primary delivery is scheduled for 678 days after award, with a required delivery date of January 22, 2028, to the DLA Distribution DDSP New Cumberland facility. A critical requirement of this contract is First Article Testing, which requires the contractor to deliver one unit to Hill AFB, Utah, within 120 calendar days of the contract date. The government will then provide written notification of approval or disapproval within 120 days of receipt. To be eligible for award, offerors must maintain an approved JCP certification for access to export-controlled data and ensure their quality management systems comply with SAE AS9100 or an equivalent standard. The contract is subject to strict domestic material restrictions, including the Buy American Act and the Berry Amendment. Additionally, the item is governed by a Northrop Grumman License Agreement, requiring adherence to restricted technical data package conditions, non-disclosure, and data destruction protocols. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system, and all packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

RETAINER, PRESSURE R

Solicitation # SPE4A7-27-T-2492

Solicitation SPE4A7-27-T-2492 is issued by the Defense Logistics Agency (DLA) Weapons Support ASC Supplier Oper AE and AF Div for the procurement of 15 units of Pressure Retainers, identified by NSN 1660-00-133-3545. The requirement specifies a delivery timeframe of 82 days after receipt of order, with a need ship date of January 31, 2027. Delivery is FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will also occur at the origin. The contract is subject to stringent technical and quality standards, incorporating the DLA Master List of Technical and Quality Requirements, including specific mandates for packaging (RP001 and ASTM D3951), bare item marking (RQ017), and sampling methods per MIL-STD-1916 or ASQ H1331. Due to the nature of the technical data, the contract is subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and compliance with the Buy American Act and Berry Amendment.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

Solicitation # SPE7L4-27-U-0124

Solicitation SPE7L4-27-U-0124 is issued by the DLA Weapons Support LSO Combat Vehicles and Armament for the procurement of gaskets, identified by NSN 5330010549260. This is a HUBZone Small Business/Small Business Set-Aside that may result in an Indefinite Delivery Contract for a one-year period. The estimated quantity is 319 units with a delivery lead time of 84 days after the order. The item is designated as a critical application item and must be free of asbestos as defined in FED-STD-313. The contract requires strict adherence to packaging and marking standards, including MIL-STD-2073-1E, MIL-STD-129, and RP001. Specifically, items susceptible to ultraviolet ray deterioration must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117. Delivery is based on FOB Origin under the First Destination Transportation program, with inspection and acceptance occurring at the destination. Payment and invoicing must be processed through the Wide Area WorkFlow system. Compliance with the Buy American Act and DFARS cybersecurity reporting requirements is mandatory.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 1 hour ago

DEADLINE

Solicitation # SPE7L3-27-T-1649

This solicitation, issued by the DLA Weapons Support Land Supplier Opns Vehicle Spt, is for the procurement of one gasket, identified by NSN 5330-01-388-8446. The item is a non-asbestos replacement for NIIN 00-802-8306, and the contract strictly prohibits the use of asbestos and the intentional addition of mercury or mercury-containing compounds. The required delivery date is October 29, 2026, with a delivery lead time of five days after receipt of order. Delivery is set as FOB Origin, with shipping destinations located at the Portsmouth Naval Shipyard in Kittery, Maine, and Portsmouth, New Hampshire. Technical and quality requirements are governed by the DLA Master List, and the item must adhere to specific packaging standards to prevent ultraviolet deterioration. This requires the gasket to be sealed in a medium duty, waterproof, greaseproof, opaque bag per MIL-DTL-117, Type II, Class C, Style 1, with overall packaging and marking following MIL-STD-2073-1E and MIL-STD-129. Inspection and acceptance will occur at the destination per FAR 52.246-1. The procurement is categorized under NAICS code 336411 and requires the use of the Wide Area WorkFlow system for all electronic invoicing and receiving reports. Offerors must comply with the Buy American Act, the Berry Amendment, and DFARS cybersecurity requirements, including the safeguarding of covered defense information. Quotations are due by November 12, 2026, and must include all necessary representations and certifications regarding business size and the use of covered defense telecommunications equipment.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 1 hour ago

DEADLINE

STRINGER, AIRCRAFT

Solicitation # SPE4A7-27-T-2495

Solicitation SPE4A7-27-T-2495 is a request for the procurement of 45 aircraft stringers (NSN 1560-01-124-4885) for the Defense Logistics Agency (DLA) Weapons Support ASC. The items must be manufactured according to specific reference drawings, including 81205 35-10703 and 81205 BAC5300, and comply with Technical Data Package Rev B Gen 3. Delivery is required within 93 days after order, with a need ship date of October 8, 2026, and a final required delivery date of September 5, 2027. The place of performance is Tinker AFB, Oklahoma, and the contract is designated as a total small business set-aside under FAR 19.5. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including ISO 9001:2015 certification for the manufacturer's inspection system. Inspection and acceptance will occur at the origin. Packaging must follow MIL-STD-129 and ASTM D3951, with specific requirements for hazardous materials under TQ requirement IP025. Due to the nature of the technical data, the contract is subject to ITAR and EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow (WAWF) system.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

Boeing Aircraft Manuals (BAM) FOR OFFICE OF SECURE TRANSPORTATION (OST) Aviation Operations Division (AOD) - NA-15.The National Nuclear Security Administration, under the Department of Energy, has issued a forecast for Boeing Aircraft Manuals to support the Office of Secure Transportation Aviation Operations Division. This requirement falls under NAICS code 336411 and is designated as a small business set-aside. The performance of the contract is expected to take place in Washington. The Boeing Company is listed as the incumbent contractor for these services. Interested parties may coordinate with the Small Business Program Manager, Chelsea Murphy, regarding this upcoming procurement opportunity.

National Nuclear Security Administration

POSTED

about 12 hours ago

DEADLINE

UAS Powerplant & Energy Systems SupplierThis subcontract with the Department of the Navy involves the supply and integration of propulsion systems and energy sources for prime contractors working on NAVAIR TRUAS Increment II projects. The scope of work requires the delivery of integrated engine/motor and fuel/battery systems that meet KPP 5 requirements, specifically ensuring compatibility with heavy fuels such as Diesel, JP5, or JP8. The technical specifications mandate that the provided powerplants must support the transport of 150lb payloads over a distance of 10 nautical miles and 100lb payloads over 40 nautical miles. This effort falls under NAICS code 336411 and is focused on the industry demonstration of cargo unmanned aircraft systems.

Department Of The Navy

POSTED

DEADLINE

TRUAS Increment II Cargo UAS Industry Demonstration

Solicitation # 15688

The Department of the Navy, through the Air Warfare Program Management Office (DRPM RAS 4.0), is seeking unmanned aircraft systems (UAS) and enabling technologies to support the Marine Corps Unmanned Logistics System-Air (ULS-A) mission. The primary objective is to establish an organic aerial distribution capability for small-unit logistics across the last tactical mile in Distributed Operations and Expeditionary Advanced Base Operations. This effort will culminate in a technology demonstration in Huntsville, Alabama, between January 25 and February 5, 2027. Participants must demonstrate ground set-up, refueling, and two specific autonomous flight profiles: one transporting a 100 lb payload for 40 nautical miles and another transporting at least 150 lbs for 10 nautical miles. The government is inviting submissions from all qualified participants, including small businesses and non-traditional defense contractors. To be considered, UAS capabilities must meet threshold minimum requirements for Operational Performance (KPP 1) and Powerplant and Energy Source (KPP 5), with a preference for a maximum gross take-off weight of up to 350 lbs. Systems must utilize a Modular Open Systems Architecture (MOSA) and comply with strict cybersecurity, electromagnetic interference, and spectrum regulations. Selection for potential Other Transaction (OT) prototype awards will be based on the highest-ranked capabilities offering the most advantageous utility to the Marine Corps logistical mission. Applications, consisting of a white paper and a completed questionnaire, must be submitted by November 30, 2026.

Department Of The Navy

POSTED

DEADLINE

Solicitation # SPE4A7-27-T-1893

Solicitation SPE4A7-27-T-1893 is a request for quotations issued by the DLA Weapons Support Center for the procurement of 51 units of Cap Assembly, identified by NSN 1615007019935. This is designated as a critical application item with approved part numbers from Bell Textron Inc (P/N 4100667479) and Wisco Products Inc (P/N FC3731). The contract is not a small business set-aside and falls under NAICS code 336411. Delivery is required within 53 days after order, with shipping terms set as FOB Origin and the final destination being the DLA Distribution Depot at Tinker AFB, Oklahoma. The procurement mandates strict adherence to quality and technical standards, including a CMMC Level 2 Self-Assessment and compliance with the DLA Master List of Technical and Quality Requirements. Inspection and acceptance will occur at the origin, utilizing zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following RP001 requirements. Additionally, the offeror must comply with the Buy American Act, the Berry Amendment, and DFARS regulations regarding the safeguarding of covered defense information and the prohibition of certain telecommunications equipment. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE4A5-27-T-1410

Solicitation SPE4A5-27-T-1410, issued by the DLA Weapons Support ASC Supplier Oper OEM Division, is a request for quotations for 10 units of a spring rod, identified as a critical application item. The required hardware is specified as NSN 1660011798038, Honeywell International Inc. part number 3171518-1. The procurement is categorized under NAICS code 336411, with a required delivery date of November 28, 2027, and a need ship date of April 6, 2027. Delivery is set for 161 days after order, with FOB Origin terms and destination inspection and acceptance at the DLA Distribution Depot Oklahoma at Tinker AFB. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over the general ASTM D3951 packaging standard. All shipments must be marked and labeled per MIL-STD-129 and palletized according to RP001. Quality assurance requires sampling in accordance with MIL-STD-1916 or ASQ H1331, with a zero-non-conformance requirement for acceptance. Key regulatory compliance includes CMMC Level 2 Self-Assessment, DFARS 252.204-7012 for safeguarding covered defense information, and the Buy American and Balance of Payments Program. Invoicing and payment must be processed electronically through the Wide Area Workflow system.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

Same awarding agency

MIL-SPEC Packaging and Marking ServicesThis subcontract involves providing specialized military-grade packaging and marking services for the DLA Weapons Support Maritime Supply Chain. The scope of work focuses on the preparation of 15 sensitive optoelectronic components, requiring the use of ESD protective materials in strict accordance with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirement RP001. Once packaged and marked, the items are to be prepared for FOB Origin shipment to Tracy, California. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 488510. Interested parties must adhere to the response deadline of November 12, 2026. The project is managed under the Department of Defense for the DLA Weapons Support Maritime Supply Chain, with the final place of performance located in Tracy, California.

Freight Transportation Arrangement

POSTED

about 1 hour ago

DEADLINE

Manufacturing of Optoelectronic Fiber Optic CouplersThis subcontract, issued by the Department of Defense for the DLA Weapons Support Maritime Supply Chain, involves the manufacture of 15 high-precision optoelectronic fiber optic couplers under NSN 6060-01-255-8801. The contractor is responsible for fabricating these components using specialized fiber optic alignment and splicing equipment in strict accordance with Basic Drawing 10001 3256502 and Reference Drawings 10001 OD32195 and 16236 EI-012558801. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 334419, with performance located in Tracy, California. Due to the nature of the defense hardware, the successful bidder must maintain ITAR/EAR compliance and hold CMMC Level 2 certification. Responses to this solicitation are due by November 12, 2026.

Other Electronic Component Manufacturing

POSTED

about 1 hour ago

DEADLINE

Supply of Aviation/Electronic Circuit Breakers

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 1 hour ago

DEADLINE

Radio Frequency (RF) Cable SupplierThis subcontract opportunity is for a supplier to provide 3,000 feet of Radio Frequency (RF) cable, specifically NSN 6145-01-593-9191, to support prime contractors under the DLA Weapons Support Maritime Supply Chain. The cable must be manufactured or sourced and delivered in continuous lengths of 500 feet per spool. All materials must be packaged, marked, and palletized in strict accordance with MIL-DTL-12000, MIL-STD-129, MIL-STD-2073-1E, and DLA requirement RP001. The performance of this contract will take place in San Diego, California. To be eligible, the supplier must ensure full compliance with the Buy American Act and adhere to DFARS cybersecurity standards. Interested parties must submit their responses by the deadline of November 12, 2026.

Other Communication and Energy Wire Manufacturing

POSTED

about 1 hour ago

DEADLINE

Gas Seal Conversion Kit Supplier

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 1 hour ago

DEADLINE

Rotary Electromechanical Actuator SupplyThis subcontract, issued by the DLA Weapons Support Maritime Supply Chain for the Department of Defense, requires the supply of one Rotary Electromechanical Actuator, identified as NSN 4810-01-672-0685. The contractor must ensure that no additive manufacturing processes are used in the production of the item and must implement specialized packaging to immobilize the product for safe delivery. Eligible bidders must possess a valid CAGE code and UEI to participate. The performance of this contract will take place in West Bath, Maine, with a response deadline set for November 12, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 1 hour ago

DEADLINE

Specialized Electrical Power Cable Supplier (NSN 6145-01-631-0193)This subcontract opportunity is for the supply of two specialized electrical power cables to support prime contractors for the DLA Weapons Support Maritime Supply Chain. The selected supplier must manufacture or source cables that strictly adhere to NSN 6145-01-631-0193 and the DLA Master List of Technical and Quality Requirements RA001. All deliverables must be marked according to MIL-STD-129 and packaged in compliance with MIL-STD-2073-1E. Eligible bidders must demonstrate compliance with the Buy American Act and provide a CMMC Level 2 Self-Assessment. The project falls under NAICS code 334413, with the place of performance located in New Cumberland. Responses to this solicitation are due by November 12, 2026.

Semiconductor and Related Device Manufacturing

POSTED

about 1 hour ago

DEADLINE

Supply of MIL-SPEC Electrical Power Cable (NSN 6145012030366)

Motor Vehicle Transmission and Power Train Parts Manufacturing

POSTED

about 1 hour ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports the Department of Defense through the DLA Weapons Support Maritime Supply Chain. The contractor is responsible for providing military-grade packaging, marking, and labeling for sensitive electronic components to ensure they are ready for destination inspection. Work is performed at Camp Lejeune and requires strict adherence to RP001 for packaging, MIL-STD-129 for marking and labeling, and ASTM D3951 standards. To maintain the integrity of the components, the contractor must utilize anti-static and moisture-barrier MIL-SPEC materials. This effort falls under NAICS code 561910 and involves delivering fully processed assemblies to prime contractors. The solicitation was posted on November 1, 2026, with a response deadline of November 12, 2026.

Packaging and Labeling Services

POSTED

about 1 hour ago

DEADLINE

Fiber Optic Cable Assembly SupplierThis subcontract involves the manufacture and supply of one specialized fiber optic cable assembly, specifically NSN 6020-01-602-1521, for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. All production must adhere to the DLA Master List of Technical and Quality Requirements, and the use of additive manufacturing is strictly prohibited. The place of performance for this requirement is located at Camp Lejeune. To ensure the secure handling of Covered Defense Information, the supplier must maintain NIST SP 800-171 compliance and complete a CMMC Level 2 self-assessment. This opportunity falls under NAICS code 335921 and is managed by the Department of Defense. Interested parties must submit their responses by November 12, 2026.

Fiber Optic Cable Manufacturing

POSTED

about 1 hour ago

DEADLINE

Defense-Compliant Packaging and Freight ServicesThis subcontract for Defense-Compliant Packaging and Freight Services supports the DLA Weapons Support Maritime Supply Chain. The selected provider will perform specialized packaging and marking in strict accordance with MIL-STD-2073-1E and MIL-STD-129 standards. The scope of work requires the use of the fastest traceable delivery methods to transport packaged components to Mobile Diving and Salvage Unit 1. Logistics operations must utilize U.S.-flag vessels for sea transport to the final place of performance in Pearl Harbor, Hawaii. This requirement falls under NAICS code 488210 and is managed by the Department of Defense. Responses for this opportunity are due by November 12, 2026.

Support Activities for Rail Transportation

POSTED

about 1 hour ago

DEADLINE

Manufacture and Supply of Panel Floor Section (P/N 1201)This subcontract involves the manufacture and supply of one Panel Floor Section, identified by NSN 2040-01-543-9486, for prime contractors supporting DLA Weapons Support Maritime Supply Chain projects. The contractor is required to fabricate the part according to Zodiac of North America P/N 1201 specifications, as these are designated as Critical Application Items. Performance of the contract will take place in Pearl Harbor, Hawaii. Strict compliance is required regarding the Buy American Act and the Berry Amendment. Additionally, the contract explicitly prohibits the use of additive manufacturing and Class I ozone-depleting chemicals during the production process. The project falls under NAICS code 336413 and is managed by the Department of Defense.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS