Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Aerospace Grade Alloy Supply

Active

Federal

Response Deadline11/04/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, involves the supply of raw aerospace-grade metal alloy stock for prime contractors. The scope of work specifically requires the provision of certified material stock for NSN 5315009699655, which must be accompanied by Material Test Reports or Certificates of Conformance to verify the grade and heat lot. Performance for this contract will take place in San Diego, California. To ensure quality and regulatory adherence, the supplier must maintain full material traceability and strictly comply with the Buy American Act. Interested parties should note the response deadline of November 4, 2026.

General Info

DoD subcontract for aerospace metal alloy stock in San Diego, due November 4, 2026.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

NAICS

423510 - Metal Service Centers and Other Metal Merchant Wholesalers

Place of Performance

SAN DIEGO, CA, 92136-3581, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A5-27-T-1991.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PIN, TIE DOWN

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 27

subcontract

Response DeadlineNov 4

Submission deadline

Response Deadline

11/04/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies raw aerospace-grade metal alloy stock for prime contractors on DLA Weapons Support ASC projects. Provides certified material stock for NSN 5315009699655 with accompanying Material Test Reports (MTRs) or Certificates of Conformance (CoC) to verify grade and heat lot. Requires Buy American Act compliance and full material traceability. Delivers certified raw material stock.

Similar Contracts

Same NAICS industry code

Steel Reinforcement SupplyThis subcontract opportunity, issued by Moore & Bruggink, Inc., is for the supply of steel reinforcement for municipal road projects within the City of Zeeland, Michigan. The selected contractor will be responsible for the fabrication and delivery of 4,500 pounds of reinforcement steel to the project site, ensuring all materials meet MDOT Standard Specifications. Interested parties must submit their responses by the deadline of November 12, 2026, at 4:00 PM. The project falls under NAICS code 423510 and is intended to support prime contractors managing these specific city infrastructure improvements.

Moore & Bruggink, Inc

POSTED

about 21 hours ago

DEADLINE

Nickel Alloy Raw Material SupplyThis subcontract involves the supply of certified nickel alloy raw stock to support prime contractors for the DLA Weapons Support Maritime Supply Chain under the Department of Defense. The scope of work focuses on sourcing material that meets specific grade and certification requirements for NSN 4820-01-480-0896, with performance taking place in Whitehall. The supplier is required to provide Mill Test Reports and maintain strict compliance with the Buy American Act and the Berry Amendment. This procurement falls under NAICS code 423510, with a response deadline set for November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 22 hours ago

DEADLINE

Aerospace Grade Raw Material SupplyThis subcontract for Aerospace Grade Raw Material Supply involves the provision of certified raw metal alloy bar stock to prime contractors supporting DLA supply contracts. The materials must strictly adhere to the chemical and physical properties specified by NASM3 through NASM20 and NASM6812. A critical requirement of the agreement is the assurance of full material traceability and strict compliance with the Buy American Act, with all deliveries requiring accompanying mill test reports. Managed by the Department of Defense under the DLA Weapons Support Aviation Supply Chain ESOC Buys, the contract falls under NAICS code 423510. The place of performance is located in Patuxent River. Interested parties must note the response deadline of November 4, 2026, for this procurement effort.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 22 hours ago

DEADLINE

QSLD-Authorized Steel Distribution and DeliveryThis small business set-aside subcontract involves the supply and delivery of certified structural steel plates for prime contractors under DLA supply contracts. The selected provider must procure materials from approved mills and ensure all plates are marked according to MIL-STD-129 and packaged in compliance with RP001 and ASTM A700 standards. Due to the weight of the plates, which reach 6,126 lbs, the contractor is required to possess heavy-lift material handling equipment. To be eligible, distributors must be listed on the Qualified Suppliers List for Distributors and maintain a CMMC Level 2 self-assessment. Performance will take place in New Cumberland, with deliveries executed FOB Origin. The solicitation is managed by the Department of Defense DDSP New Cumberland Facility under NAICS code 423510, with a response deadline of November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 22 hours ago

DEADLINE

Supply of ASTM A582 Type 303 Stainless SteelThis subcontract involves the supply of raw stainless steel bar stock for prime contractors working on projects for the DLA Weapons Support ASC Commodities Division. The provider is responsible for sourcing and delivering material that strictly adheres to ASTM A582 Type 303 Condition A standards, ensuring all deliveries are accompanied by Mill Test Reports to verify necessary chemical and physical properties. The contract requires strict compliance with DFARS domestic sourcing requirements to ensure regulatory alignment. Performance will take place in New Cumberland, Pennsylvania, with the provider delivering certified raw materials directly to the designated fabricator.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

Supply of ASTM A53 Grade B Seamless Black Carbon Steel PipeThis small business set-aside subcontract through the Department of Defense involves the supply of 3,297 total feet of new, steam-rated, black carbon steel seamless pipe for prime contractors at W6QM Micc-Ft Drum. The required materials must be ASTM A53 Grade B, Schedule 80 pipe with beveled ends, provided in 21-foot lengths across 2-inch, 4-inch, and 8-inch diameters. The contract mandates Buy American domestic origin certification and the submission of manufacturer specification sheets. Delivery is F.O.B. Destination, and all delivery drivers are required to possess a valid Real ID to gain facility access.

W6QM Micc-Ft Drum

POSTED

DEADLINE

Supply of #4 Steel ReinforcementThis subcontract, issued by the Department of Agriculture for Csa Intermountain 8 Usda-Fs, involves the supply of #4 steel reinforcement bars for prime contractors working on USDA Forest Service concrete site furnishing projects. The selected provider is responsible for delivering steel rebar that adheres to #4 specifications and ASTM standards to a designated fabrication facility. Additionally, the contractor must provide material certifications to verify that all steel meets the specific standards required for the project. The opportunity is designated as a total Small Business Set Aside under NAICS code 423510. The performance location is centered in the 80301 zip code area. Interested parties must submit their responses by the deadline of November 24, 2026.

Csa Intermountain 8 Usda-Fs

POSTED

DEADLINE

Structural Wood and Hardware SupplyThis subcontract for Structural Wood and Hardware Supply supports the Gwinnett County Department of Parks and Recreation pavilion projects. The selected provider will supply essential raw materials, including pressure-treated lumber, structural beams, joists, fascia board material, and structural bolts and brackets, all of which must adhere to specific county requirements. The scope of work includes the delivery of these specified lumber and hardware materials directly to the prime contractor or designated project sites. This opportunity is managed by the Gwinnett County Government in Georgia, with a response deadline set for November 4, 2026.

Gwinnett County Government

POSTED

DEADLINE

Supply of Resin Epoxy (NSN 8040-01-674-3901)This subcontract involves the supply of six units of Resin Epoxy, identified by NSN 8040-01-674-3901, to support prime contractors delivering for the Defense Logistics Agency. The product must strictly adhere to MIL-STD-2073-1E packaging standards and meet shelf-life requirement RS011, which specifies a non-extendable 12-month shelf life. To be eligible, the provider must maintain an active SAM registration and provide the necessary shelf-life certification. The contract requires the delivery of all six units to the designated destination point in FPO 09513 within 20 days. This procurement falls under NAICS code 423510 and is managed through the Department of Defense. Interested parties must have responded by the deadline of November 2, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Specialized Steel & Material SupplyThis subcontract for Specialized Steel and Material Supply supports NSWC Crane railcar projects by providing high-strength steel and raw materials to prime contractors. The scope of work involves the delivery of certified high-yield structural steel and AAR-certified alloys to a fabrication facility, ensuring all materials meet the specific weight and structural strength requirements for a Gross Rail Load of 286,000 lbs in accordance with AAR-M1001 standards. Managed under the Department of Defense, this opportunity falls under NAICS code 423510. The solicitation was posted on October 26, 2026, with a response deadline set for November 25, 2026.

POSTED

DEADLINE

PLATE,METAL,METRIC and BEAM,H-SHAPE,METRIC for Ship Repair Facility and Japan Regional Maintenance Center (SRF-JRMC), US Naval Base, Yokosuka, Japan.

Solicitation # N6264927QB002

Solicitation N6264927QB002, issued by NAVSUP FLT LOG CTR YOKOSUKA, is a firm-fixed-price request for the procurement of metric metal plates and H-shape beams to support the Ship Repair Facility and Japan Regional Maintenance Center at the US Naval Base in Yokosuka, Japan. The requirement includes nine sheets of 16mm metal plates conforming to JIS-G-3193 and JIS-G-3106 SM400A steel standards, and 78 meters of metric H-shape beams conforming to JIS-G-3193. All products must be new, as refurbished items are not acceptable. Delivery is required door-to-door to the A61 warehouse, with a mandate that any shipments weighing 30 pounds or more must be palletized. This acquisition is unrestricted, though it is noted as a set-aside for Economically Disadvantaged Women-Owned Small Business in some documentation. Offers must be submitted on an all-or-none basis by November 4, 2026. A critical requirement is that all sources must be authorized to operate in Japan per DFARS 252.225-7042, and prime contractors based outside of Japan must provide proof of incorporation or similar documentation. Award will be based on the most advantageous offer, primarily considering technical capability and price, with the government reserving the right to evaluate past performance. Invoicing must be processed electronically through the Wide Area WorkFlow system.

Navsup Flt Logistics Ctr Yokosuka

POSTED

DEADLINE

ENGR-St. Clair - Galvanized Steel Sheets

Solicitation # SRC0000037362

Solicitation SRC0000037362 is issued by the Alabama Department of Corrections, Engineering, for the procurement of galvanized steel sheets. The contract allows for a total value not to exceed 25,000 dollars over a potential five year term, with annual renewals subject to mutual written agreement. Price escalations are capped at 5 percent of the annual contract cost, provided the total contract ceiling of 25,000 dollars is not exceeded. The State of Alabama reserves the right to evaluate bids based on cost realism and price reasonableness, and may request proof of qualifications, including professional licenses, certificates of insurance, and manufacturer reseller authorizations. The contract is governed by the Code of Alabama and the Universal Commerce Code, with the City of Montgomery designated as the sole venue for litigation. All products are subject to inspection by the State after delivery, and final acceptance is contingent upon a satisfactory inspection. Suppliers must be registered in Alabama Buys for electronic submission and must certify compliance with state tax laws, E-Verify requirements, and non-collusion standards. Payment must be accepted via electronic methods, such as P-cards or EFT, at no additional cost to the State. Out-of-state entities are required to register with the Alabama Secretary of State before conducting business.

Department Of Corrections, Engineering

POSTED

DEADLINE

in about 8 hours

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

Supply of Flat Washers (NSN 5310-01-625-5545)This subcontract involves the supply of 54 flat washers for prime contractors supporting DLA Weapons Support ASC projects. The required parts are identified by NSN 5310-01-625-5545 and Boeing PN 4M405-001, with delivery terms set as FOB Origin. Performance will take place in New Cumberland, Pennsylvania. The contractor must adhere to strict quality and compliance standards, including SAE AS9003 or ISO 9001 quality systems and a CMMC Level 2 Self-Assessment. Quality control must be performed according to MIL-STD-1916 or ASQ H1331, with packaging and shipment marking following ASTM D3951 and MIL-STD-129 respectively.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 22 hours ago

DEADLINE

Supply of Commercial Wire Rope (NSN 4010015953882)This subcontract involves the supply of specialized commercial wire rope, specifically matching NSN 4010015953882 and Part Number CL-3-SC-1000FT, to support prime contractors delivering on Department of Defense contracts for the DLA Weapons Support ASC Supplier OEM Division. The scope of work requires the delivery of four units of packaged and labeled wire rope, with performance taking place in New Cumberland. Strict adherence to technical and regulatory standards is mandatory, including packaging per ASTM D3951 and MIL-STD-129 and palletization according to RP001. The provider must ensure full compliance with the Buy American Act, the Berry Amendment, and DFARS Cybersecurity standards. The response deadline for this opportunity is November 4, 2026.

POSTED

about 22 hours ago

DEADLINE

Supply of Socket Head Cap Screws (NSN 5305017060326)This subcontract involves the manufacture or procurement of 30 socket head cap screws, identified by NSN 5305017060326 and part number 3M1345-도BA, to support prime contractors on DLA Weapons Support ASC projects. The supplier must ensure all units adhere to DLA Master List requirements RA001, RP001, RQ011, and RQ017, with packaging and marking strictly following MIL-STD-2073-1E and MIL-STD-129 standards. The contract mandates full compliance with the Buy American Act and the Berry Amendment. Once completed, the 30 packaged screws are to be delivered to the Naval Air Systems Command Central Kitting Activity. This effort is managed under the Department of Defense via the DLA Weapons Support ASC Supplier OEM Division, with performance centered in Orange Park, Florida.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 22 hours ago

DEADLINE

Aircraft Gas Turbine Engine Air Seal SupplierThis subcontract involves the manufacture or sourcing of 290 aircraft gas turbine engine air seals, specifically GE part number 9688M07P02, for delivery to DLA Distribution San Diego. The supplier must ensure all units of NSN 2840001174916 comply with the DLA Master List of Technical and Quality Requirements, the Buy American Act, and are certified as mercury-free. Strict adherence to military standards is required, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The contract is managed under the Department of Defense through the DLA Weapons Support ASC Supplier OEM Division, with performance taking place in San Diego.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 22 hours ago

DEADLINE

MIL-SPEC Aerospace Packaging and Freight ServicesThis subcontract for MIL-SPEC Aerospace Packaging and Freight Services involves providing specialized packaging, marking, and transport for prime contractors supporting the DLA Weapons Support ASC Supplier Oper OEM Division. The scope of work requires strict adherence to military standards, including MIL-STD-129, RP001, RP003, and MIL-STD-2073-1E, specifically for FAA commercial material. The contractor is responsible for utilizing appropriate preservation materials and secure transport methods to handle oversized aircraft components. The specific deliverable for this engagement is the transport of two aircraft doors from the point of origin to the DLA Distribution Depot Oklahoma located at Tinker AFB. This project falls under NAICS code 484220 and is managed by the Department of Defense. Interested parties must respond by November 4, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 22 hours ago

DEADLINE

Aircraft Door (Boeing P/N 112N6012-1) SupplierThis subcontract involves the supply of two complete aircraft door assemblies, specifically Boeing part number 112N6012-1, for prime contractors supporting DLA Weapons Support ASC projects. The selected supplier is responsible for the manufacture or procurement of these assemblies in strict accordance with technical specifications, ensuring full supply chain traceability per DLAD Procurement Note C03 and adhering to quality inspection standards MIL-STD-1916 or ASQ H1331. Final deliverables must include Certificates of Airworthiness and Conformance. To qualify, the supplier must maintain FAA Airworthiness Approval, ISO 9001:2015 certification, and CMMC Level 2 compliance. The project is managed under NAICS code 336413 for the Department of Defense, with the place of performance located at Tinker AFB. Interested parties must submit their responses by November 4, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

Supply of Rack Cover (NSN 2915-01-201-1658)This subcontract involves the manufacture or procurement of a rack cover identified by NSN 2915-01-201-1658 for the DLA Weapons Support ASC Supplier OEM Division. The contractor is responsible for delivering one unit to the DLA Distribution Depot Oklahoma at Tinker AFB, ensuring the product meets all technical requirements specified in the DLA Master List. Strict adherence to quality and security standards is required, including ISO 9001:2015 certification and compliance with MIL-STD-129 for marking and shipment. Additionally, the provider must comply with DFARS 252.204-7012 and NIST SP 800-171 regulations. The opportunity is categorized under NAICS code 332322, with a response deadline of November 4, 2026.

Sheet Metal Work Manufacturing

POSTED

about 22 hours ago

DEADLINE

Supply of Compressor Vanes for Aircraft Gas Turbine EnginesThis subcontract involves the manufacture or sourcing of nine aircraft gas turbine engine compressor vanes made from high-temperature alloys for the Department of Defense, specifically supporting DLA Weapons Support ASC projects. The selected provider must ensure all units are marked according to MIL-STD-129 and packaged in compliance with MIL-STD-2073-1E. The contract requires the supplier to be registered in SAM.gov and deliver the components FOB Origin within a 152-day timeframe. Performance for this requirement is centered in San Diego, California, under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

Manufacturer of Special Cable Assembly (NSN 6150-01-356-8642)This subcontract involves the manufacture or procurement of one Special Cable Assembly, identified by NSN 6150-01-356-8642, to support prime contractors for the Department of Defense DLA Weapons Support ASC Supplier Oper OEM Division. The selected provider must ensure the assembly is packaged and marked in strict accordance with MIL-STD-2073-1E, MIL-STD-129, and RP001 palletization standards, with delivery terms set as FOB Origin. The contractor is required to disclose the origin of all materials used and confirm the absence of covered defense telecommunications equipment. This opportunity falls under NAICS code 335999, with the place of performance located in New Cumberland, Pennsylvania. Responses are due by November 4, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 22 hours ago

DEADLINE

Defense-Compliant Packaging and Palletization ServicesThis subcontract for Defense-Compliant Packaging and Palletization Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves the specialized packaging of finished bolts according to ASTM D3951, labeling and marking per MIL-STD-129, and palletization in accordance with DLA requirement RP001. The service provider must utilize MIL-SPEC materials and compliant equipment while maintaining a thorough understanding of the DLA Master List of Technical and Quality Requirements to ensure all goods are prepared for FOB Origin shipment. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, the work is to be performed in New Cumberland, Pennsylvania. The opportunity is categorized under NAICS code 561910, with a response deadline set for November 4, 2026.

Packaging and Labeling Services

POSTED

about 22 hours ago

DEADLINE

Supply of Aerospace/Defense Grade Bolt StockThis subcontract involves the supply of aerospace and defense grade raw metal stock to prime contractors working on DLA Weapons Support ASC projects. The primary objective is to provide high-grade alloy steel or specialty metal stock specifically meeting NSN 5306016515394 requirements for the manufacture of close tolerance bolts. To ensure quality and compliance, the supplier must provide Mill Test Reports for material certification and strictly adhere to the Buy American Act and the Berry Amendment regarding domestic sourcing. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, the contract falls under NAICS code 331210. Performance for the delivery of certified raw material stock is centered in New Cumberland. Interested parties must note the response deadline of November 4, 2026, to be considered for this procurement effort.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 22 hours ago

DEADLINE

Precision Manufacturing of Close Tolerance BoltsThis subcontract involves the precision machining and manufacturing of 39 close tolerance bolts to NSN 5306016515394 specifications for the DLA Weapons Support ASC Supplier OEM Division. The project requires the use of traditional manufacturing methods and precision CNC equipment, specifically prohibiting the use of additive manufacturing. Performance will take place in New Cumberland, Pennsylvania. To be eligible, the contractor must hold ISO 9001:2015 certification and maintain CMMC Level 2 compliance. Additionally, all work must adhere to DFARS prohibitions regarding hexavalent chromium. The response deadline for this requirement is November 4, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 22 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS