Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Aerospace Grade Material Supply

Active

Federal

Response Deadline10/02/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, titled Aerospace Grade Material Supply, involves the procurement of certified raw aerospace-grade metals to support prime contractors fulfilling DLA supply contracts. The supplier is responsible for sourcing and delivering material stock, including sheets, plates, and billets, that strictly adhere to TDP Rev A Gen 1 and Basic Drawing NR 98897 4J11183 specifications. To ensure quality for critical application components, the provider must supply comprehensive Mill Test Reports and maintain full material traceability. Managed by the Department of Defense under the ASC Supplier Oper AE and AF Div, this opportunity is designated as a Total Small Business Set-Aside under NAICS code 332410. The place of performance is located in New Cumberland, Pennsylvania. Interested parties must respond by the deadline of October 2, 2026, following the posting date of September 24, 2026.

General Info

Small business subcontract for certified aerospace metals in New Cumberland, PA by October 2026.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

NAICS

332410 - Power Boiler and Heat Exchanger Manufacturing

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

SBA

Documents

This scope was carved out of SPE4A7-26-T-792Q.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PANEL, STRUCTURAL, AIRCR

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedSep 24

subcontract

Response DeadlineOct 2

Submission deadline

Response Deadline

10/02/2026, 05:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies certified raw aerospace-grade metals for prime contractors delivering DLA supply contracts. Sources and delivers raw materials meeting TDP Rev A Gen 1 and Basic Drawing NR 98897 4J11183 specifications. Provides Mill Test Reports and full material traceability for Critical Application components. Delivers certified raw material stock such as sheets, plates, or billets.

Similar Contracts

Same NAICS industry code

44--COOLER,FLUID,INDUSTRIA

Solicitation # SPE8E826T5736

DLA Troop Support is soliciting quotes for the procurement of two industrial fluid coolers under NSN 4420011604984. This is a total small business set-aside opportunity under NAICS code 332410, with delivery required to the General Depot of Naval Supplies within 20 days after the order is received. Approved sources for this equipment include 28953 71-302-1 and 6LE50 5-034-03-002. The solicitation, identified as SPE8E826T5736, was posted on September 27, 2026, with a response deadline of October 8, 2026. All quotes must be submitted electronically via the provided link, as hard copies of the solicitation and technical drawings are not available. Interested parties should direct inquiries to the buyer through the DIBBS portal.

DLA Troop Support

POSTED

about 4 hours ago

DEADLINE

44--CORE ASSEMBLY,FLUID HE

Solicitation # SPE8E926T3902

DLA Troop Support is seeking quotes for the procurement of 18 units of Core Assembly, Fluid HE under solicitation SPE8E926T3902. This requirement is designated as a total small business set aside under NAICS code 332410. The items are to be delivered to the General Depot of Naval Supplies within 20 days after the order is received. Approved sources for this procurement include 74924 72-19750-31 and 74924 729XA0563. This is a request for quote that must be submitted electronically by the deadline of October 8, 2026. No hard copies of the solicitation or technical drawings are available, and all interested responsible sources are encouraged to submit their quotes via the provided electronic channels.

DLA Troop Support

POSTED

about 4 hours ago

DEADLINE

Boiler Tuning Services - Chalmers P. Wylie VA Ambulatory Care Center - Small Business Set-Aside

Solicitation # 36C25026Q0334

The Department of Veterans Affairs is seeking a contractor to provide semi-annual preventative maintenance, troubleshooting, and tuning services for three Williams Davis 250 hp gas-fired boilers at the Chalmers P. Wylie VA Ambulatory Care Center in Columbus, Ohio. This is a 100% Small Business Set-Aside under a firm-fixed-price contract. The period of performance includes a base year starting September 30, 2026, with four subsequent option years extending through September 30, 2031. Services must be performed on both natural gas and #2 fuel oil and must comply with VHA Directive 1810, ASME codes, NFPA 85, and various VA Engineering SOPs. Key requirements include the provision of a qualified boiler technician holding a 3rd Class Boiler Engineer license and authorization as a Preferred Utilities technician. The contractor is responsible for diagnostic troubleshooting via the Preferred Controls app and providing updates to the boiler control system and SCADA. Award will be based on a comparative evaluation where technical capabilities and past performance are deemed more important than price. Offerors must submit their quotes by September 28, 2026, and provide a detailed quality control plan within 14 days of the award. All work is to be performed during standard business hours from 0700 to 1600 EST, Monday through Friday.

250-NETWORK Contract Office 10 (36C250)

POSTED

DEADLINE

Supply of Thermal Expansion Valves (NSN 4820015777555)This subcontract involves the procurement and delivery of 23 Thermal Expansion Valves, identified by NSN 4820015777555, for prime contractors supporting DLA Land and Maritime hardware contracts. The supplier is responsible for sourcing the units and delivering them to the designated DLA receiving point in New Cumberland. The contractor must adhere to strict technical and regulatory standards, including packaging per MIL-STD-2073-1E and RP001, and marking per MIL-STD-129. Additionally, the provider must supply Safety Data Sheets in accordance with 29 CFR 1910.1200(g) for hazardous materials and maintain cybersecurity compliance as outlined in NIST SP 800-171.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Aluminum Alloy 5052 Metal Plate SupplierThis subcontract with the Department of Defense involves the supply of 54,000 precision-cut metal plates for prime contractors under DLA supply contracts. The plates must be manufactured or sourced using Aluminum Alloy 5052 and strictly adhere to part number 60205472-00 and national stock number 9515-25-160-4477. All deliverables must be packaged and marked according to MIL-STD-129, RP001, and IP083 standards, utilizing industrial palletization equipment that meets DLA requirements. The contract falls under NAICS code 332410 and is associated with the DDSP New Cumberland Facility.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Casting Tooling Design and FabricationThis subcontract for Casting Tooling Design and Fabrication involves the design and production of specialized casting molds for prime contractors supporting DLA supply contracts. The primary objective is to manufacture the tooling necessary for metal casting cylinder caps, ensuring all components strictly adhere to TDP Rev A Gen 1 dimensions. The work requires the use of professional tool and die making equipment and mold fabrication machinery to deliver completed casting tooling. The project is managed under the Department of Defense for the Land Supplier Opns Vehicle Spt agency, with performance taking place in Anniston, Alabama. The contract falls under NAICS code 332410 and was posted on September 24, 2026, with a response deadline of October 5, 2026.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

COOLER, FLUID, INDUSTRIA

Solicitation # SPE8E8-26-T-5734

Solicitation SPE86-26-T-5734 is a fixed-price request for quotations issued by the Defense Logistics Agency Troop Support Construction and Equipment for one industrial fluid cooler, identified by NSN 4420-01-483-0391. The requirement is issued under the First Destination Transportation program with delivery required within 20 days after receipt of the order. The place of performance is Camp Lejeune, North Carolina, and offers must be submitted as FOB Origin via the DIBBS system by October 5, 2026. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129, and requires the use of the Wide Area WorkFlow system for electronic invoicing and payment. Key compliance requirements include the Buy American and Balance of Payments Program, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Evaluation factors prohibit the use of additive manufacturing unless authorized, and the government may apply a HUBZone price evaluation preference. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-1.

Defense Logistics Agency

POSTED

DEADLINE

HEATER, WATER, ELECTR

Solicitation # SPE86-26-T-5730

This solicitation, issued by DLA Troop Support Construction and Equipment, is a request for quotations for the procurement of four electric water heater E/I heater jackets (NSN 4410-01-181-5703). The procurement is a Women-Owned Small Business (WOSB) set-aside, requiring offerors to be certified by the Small Business Administration or an approved third-party certifier. The contract is structured as a fixed-price acquisition, with a required delivery timeline of 132 days and a need ship date of February 15, 2027. Quotations must be submitted via the DIBBS system no later than the close of business on October 5, 2026. The contract includes rigorous technical, packaging, and safety requirements. Packaging must adhere to MIL-E-17555 for electronic equipment and MIL-STD-2073-1E for data, while palletization must comply with DLA packaging requirements (RP001). Marking must follow MIL-STD-129, and any hazardous materials must be labeled according to the Hazard Communication Standard. Additionally, the contract incorporates strict domestic sourcing mandates, including the Buy American Act and the Berry Amendment, requiring disclosure if non-domestic materials are used. Compliance with cybersecurity standards for safeguarding covered defense information and adherence to regulations regarding the prohibition of mercury and the combating of human trafficking are also mandatory.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

SHELL, FLUID COOLER, IND

Solicitation # SPE8E8-26-T-5733

Solicitation SPE8E8-26-T-5733 is a fixed-price request for quotations issued by the Defense Logistics Agency Troop Support for one industrial fluid cooler shell, which serves as a heat exchanger for Aerco model SW1B05. The item is identified by NSN 4420012169384 and part number B-29-1A. The procurement is categorized under NAICS 332410, with quotes required to be submitted via the DLA Internet Bid Board System. The required delivery date is September 22, 2026, with a delivery lead time of 20 days after order. Shipping is FOB Destination, with the final delivery point being the USS Carl Vinson CVN 70 at FPO AP 96629. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. It incorporates DLA technical requirements RA001 and packaging requirements RP001. Special environmental restrictions prohibit the intentional addition of mercury or mercury-containing compounds to the hardware. Inspection and acceptance will occur at the destination. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses regarding cybersecurity, domestic material sourcing, and the prohibition of additive manufacturing unless specifically authorized.

Defense Logistics Agency

POSTED

DEADLINE

Watertube Boiler SupplierThis subcontract opportunity is for the manufacture and delivery of a high-capacity CleaverBrooks MS-700-1500-1SST watertube boiler designed for Department of Veterans Affairs medical center projects. The unit must feature an input capacity of 1500 MBTU and be configured for natural gas fuel, adhering strictly to VA technical specifications. The project is managed by the Department of Veterans Affairs Network Contract Office 12, with performance taking place in Milwaukee. Interested suppliers must be registered in the System for Award Management and provide the country of origin for the equipment. The response deadline for this requirement is October 1, 2026.

252-NETWORK Contract Office 12 (36C252)

POSTED

DEADLINE

4410--Boiler and Feed Tank Sources Sought

Solicitation # 36C25226R0064

The Department of Veterans Affairs is conducting a sources sought market research effort to identify qualified businesses capable of providing a boiler and feed tank for the Clement J. Zablocki VA Medical Center in Milwaukee, Wisconsin. This is not a formal solicitation, and the government is seeking information to understand the marketplace before potentially publishing a future acquisition. Interested sources must submit their responses via email to Contract Specialist Misty Gates and Contracting Officer Stacy Hoover by 3:30 p.m. CT on October 1, 2026, using the specific subject line Sources Sought Boiler and Feed Tank Requirement. Technical requirements specify a CleaverBrooks MS-700-1500-1SST watertube boiler with a natural gas fuel source, an input capacity of 1500 MBTU, an operating pressure of 8 psi, and a design pressure of 15ft SIT. The equipment must feature a NEMA 1 rating, a 2 HP TEFC blower motor, and safety valves with full capacity rating. Potential respondents must provide their company details, SAM UEI number, and confirmation of their ability to meet these specifications under NAICS code 332410. Additionally, firms must disclose their business size status, such as whether they are a small business or service-disabled veteran-owned small business, and specify the country of origin for the equipment.

252-NETWORK Contract Office 12 (36C252)

POSTED

DEADLINE

Fluid Heat Exchanger Repair and ModificationThis subcontract, issued by Navsup Weapon Systems Support for the Department of the Navy, involves the teardown, evaluation, repair, and modification of a specific fluid heat exchanger identified by NSN 7RH 1660-01-454-5013 QE. The scope of work includes disassembling the unit for internal inspection, conducting technical assessments, and performing restorative modifications according to technical drawings. The process requires the use of specialized pressure testing tooling and IUID data matrix marking equipment to ensure the final delivery of one restored heat exchanger with a registered UII. The project falls under NAICS code 332410 and is to be performed in Philadelphia, Pennsylvania. Interested parties must respond by October 26, 2026, in accordance with the solicitation posted on September 24, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Manufacture and Supply of Linear Actuating CylindersThis subcontract opportunity with the Department of Defense involves the manufacture and supply of linear actuating cylinders for prime contractors under DLA supply contracts. The selected provider must fabricate cylinders according to TDP Rev A Gen 1 and specific reference drawings, including 81205 BAC5439, 77272 BAC5424, and 81205 BACP20AX. Production requires the use of precision CNC machining, lathes, and milling to ensure adherence to strict military tolerances, and the provider must maintain a valid CAGE code registration. The contract is designated as a Total Small Business Set-Aside under NAICS code 332721. It was posted on September 25, 2026, with a response deadline of October 27, 2026. The agency overseeing the requirement is the ASC Supplier OE and AF Division.

Precision Turned Product Manufacturing

POSTED

DEADLINE

in about 1 month

MIL-SPEC Packaging and Palletization ServicesThis subcontracting opportunity, issued by the Department of Defense under the ASC Supplier Oper AE and AF Division, involves providing specialized military packaging, marking, and palletization services for prime contractors on DLA supply contracts. The scope of work requires strict adherence to specific military and industrial standards, including TQ IP025 (FED-STD-313) or ASTM D3951 for packaging, MIL-STD-129 for marking and labeling, and RP001 for palletization. Contractors must utilize MIL-SPEC materials and industrial labeling equipment to ensure all components are properly prepared and ready for freight shipping. The solicitation is designated as a Total Small Business Set-Aside under FAR 19.5, categorized under NAICS code 488490. Interested parties should note the key dates, with the posting date set for September 25, 2026, and a response deadline of October 27, 2026. This contract is essential for maintaining the integrity of the defense supply chain by ensuring that military components are packaged and labeled according to rigorous federal and departmental specifications.

Other Support Activities for Road Transportation

POSTED

DEADLINE

in about 1 month

Supply of NSN 1560-01-686-8294 ComponentsThis subcontract, issued by the Department of Defense ASC Supplier OE and AF Division, requires the manufacture or sourcing of hardware components identified by NSN 1560-01-686-8294 for prime contractors on DLA supply contracts. The provider must ensure all physical components meet strict technical specifications, adhere to DFARS specialty metals restrictions, and comply with the Buy American Act and BERAA designated country requirements. Additionally, the contractor is responsible for performing bare item marking according to RQ017 standards. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332999. To be eligible, providers must maintain ISO 9001:2015 certification and meet CMMC compliance standards. The response deadline for this requirement is October 27, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

in about 1 month

Supplier of Unloading Gates (NSN 4925-01-678-8118)This HUBZone set-aside subcontract with the Department of Defense involves the manufacture or sourcing of unloading gates identified by NSN 4925-01-678-8118 for prime contractors supporting DLA supply contracts. The supplier is responsible for ensuring all hardware components conform to specific CAGE codes and part numbers, while performing rigorous quality inspections to identify corrosion and defects. The contract requires the delivery of up to 126 units annually, with all items packaged and marked according to MIL-STD-2073-1E and MIL-STD-129 standards. This procurement falls under NAICS code 332322 and is managed by the ASC Supplier Oper AE and AF Div.

Sheet Metal Work Manufacturing

POSTED

DEADLINE

Supply of Ferrules (NSN 5342011260564)This subcontract involves the manufacture or sourcing of 21 specialized ferrules to support prime contractors delivering DLA supply contracts. The required components must match Part Number 02-0005-01 from Sargent Controls and Aerospace, identified by NSN 5342011260564. All units must adhere to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging standards. The contract is managed by the Department of Defense under the ASC Supplier Oper AE and AF Div, with the final delivery destination being DLA Distribution San Joaquin in Tracy, California. The opportunity falls under NAICS code 332999, with a response deadline set for September 30, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

GEAR AND MOTOR ASSY

Solicitation # SPE4A7-26-T-760B

Solicitation SPE4A7-26-T-760B is a request for quotations issued by DLA Aviation for the procurement of 12 units of a Gear and Motor Assembly, identified as NSN 6685011433964. This item is classified as a commercial product and is designated as a critical application item. The procurement is governed by NAICS code 334512 and requires compliance with the Buy American Act and the Berry Amendment. Delivery is set for FOB Origin with a need ship date of March 16, 2027, and an original required delivery date of April 22, 2028, shipping to the DLA Distribution Depot Oklahoma at Tinker AFB. The contract mandates strict quality and technical adherence, incorporating the DLA Master List of Technical and Quality Requirements and requiring a CMMC Level 2 Self-Assessment. Inspection and acceptance will occur at the destination, with manufacturer inspection systems requiring compliance with SAE AS9003 or ISO 9001. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, while sampling methods must align with MIL-STD-1916 or ASQ H1331. Invoicing and payment processing are to be handled electronically through the Wide Area WorkFlow system.

Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

DEADLINE

RIB, STIFFENER, AIRCRAFT

Solicitation # SPE4A7-26-T-761N

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

PAD, WEAR, LANDING GE

Solicitation # SPE4A7-26-T-759U

Solicitation SPE4A7-26-T-759U is a total small business set-aside for the procurement of 822 landing gear wear pads for the main gear brake system, identified by NSN 1620-01-112-2967. The items must conform to Technical Data Package Rev B Gen 3 and basic drawing 81996 1620-UH60-001 Revision D. Approved sources include Meggitt Aircraft Braking Systems Corporation, Parker-Hannifin Corporation, and National Machine Company. This is a fixed-price contract with a need ship date of March 16, 2027, and an original required delivery date of September 27, 2027. Delivery is set as FOB Origin, with the freight shipping destination being DLA Distribution Albany in Georgia. Quality assurance is stringent, requiring a zero-based sampling plan and compliance with ISO 9001:2015. Inspection occurs at the origin, while acceptance takes place at the destination. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. The contract incorporates various FAR and DFARS clauses, including the Buy American Act and the Berry Amendment. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

SEAL, RUDDER BALANCE

Solicitation # SPE4A7-26-T-755N

Solicitation SPE4A7-26-T-755N is a request for quotations issued by DLA Aviation for the procurement of 88 rudder balance seals, identified by NSN 1560-00-853-6919. This critical application item is to be delivered FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. The need ship date is March 16, 2027, with an original required delivery date of June 12, 2027. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS). The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including tailored higher-level quality requirements (RQ001) and source approval documentation (RC001). Inspection and acceptance will occur at the origin, with sampling conducted according to MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan. Packaging must comply with RP001 and MIL-STD-129, with specific requirements for bare item marking (RQ017). Additionally, the contractor must meet Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment standards and comply with the Buy American Act and Berry Amendment for domestic material restrictions. Payment and receiving reports are to be processed through the Wide Area Workflow (WAWF) system.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

BOWL, MANIFOLD ASSY

Solicitation # SPE4A7-26-T-757M

Solicitation SPE4A7-26-T-757M is a request for quotations issued by DLA Aviation for the procurement of four Bowl, Manifold Assemblies, identified by NSN 1650001024420 and part number 280885-1 from Triumph Actuation Systems. The requirement is categorized under NAICS code 336413. The delivery is set for 171 days after award, with a need ship date of March 16, 2027, and an original required delivery date of April 23, 2027. Shipping is FOB Origin, with the destination for both inspection and acceptance being DLA Distribution Cherry Point in North Carolina. The contract mandates strict adherence to DLA Master List technical and quality requirements, including ISO 9001:2015 compliance for manufacturer inspection systems. Packaging must follow ASTM D3951 and MIL-STD-129, with palletization conforming to RP001. Key security and compliance requirements include CMMC Level 2 self-assessment, Covered Defense Information protections, and adherence to the Buy American Act and Berry Amendment. Invoicing must be processed through the Wide Area WorkFlow system. Quotations are due by September 25, 2026, and must be submitted via the DLA Internet Bid Board System.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Solicitation # SPE4A7-26-T-758P

Solicitation SPE4A7-26-T-758P is a fixed-price request for the procurement of 278,000 blind rivets, identified by NSN 5320007316153. Issued by DLA Aviation, the contract requires delivery to DLA Dist San Joaquin in Tracy, California, with a need ship date of March 16, 2027, and a final required delivery date of April 26, 2027. The shipment is designated as FOB Origin under the First Destination Transportation program. The contract mandates strict quality and safety compliance, including a CMMC Level 2 self-assessment and adherence to MIL-STD-1916 or ASQ H1331 for zero-based sampling. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with a total prohibition of mercury or mercury compounds in all preservation and packing materials. Inspection and acceptance will occur at the destination. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act and Berry Amendment.

Hardware Manufacturing

POSTED

DEADLINE

TRANSMITTER, TEMPERATUR

Solicitation # SPE4A7-26-T-755T

DLA Aviation is seeking quotes for the procurement of 11 temperature transmitters under solicitation SPE4A726T755T. The approved source for this item is 02009 23934-3-6, and delivery is required to DLA Distribution within 171 days after the order is received. This opportunity is set aside for SBA Certified Women-Owned Small Businesses under NAICS code 334519. Interested parties must submit their quotes electronically by the deadline of September 25, 2026. The solicitation is available as an RFQ via the provided online link, though no hard copies, specifications, or drawings are available. All responsible sources are encouraged to submit timely electronic quotes for consideration.

Other Measuring and Controlling Device Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS