Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Aerospace-Grade Plating and Finishing for Connector Shells

Active

Federal

Response Deadline11/02/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves providing aerospace-grade surface treatment and plating for connector shells destined for the DLA Weapons Support Active Devices Division. The contractor is responsible for applying finishes according to drawing 30003 3930AS934, utilizing ODS-free cleaning and finishing processes to ensure all delivered components meet strict military specifications and FED-STD-313 standards. The project is categorized under NAICS code 332813 and will be performed in Jacksonville, Florida. To successfully execute the contract and access necessary technical specifications, the provider must maintain JCP certification. Interested parties must respond by November 2, 2026.

General Info

Aerospace surface treatment for DLA connector shells in Florida; JCP certification required.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

NAICS

332813 - Electroplating, Plating, Polishing, Anodizing, and Coloring

Place of Performance

JACKSONVILLE, FL, 32212-0103, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M5-27-T-1242.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SHELL, ELECTRICAL CONNE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 22

subcontract

Response DeadlineNov 2

Submission deadline

Response Deadline

11/02/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs surface treatment and plating for prime contractors delivering DLA Weapons Support components. Applies finishes per drawing 30003 3930AS934 using ODS-free cleaning and finishing processes. Requires JCP certification for access to technical specifications and compliance with FED-STD-313. Delivers plated connector shells meeting military specifications.

Similar Contracts

Same NAICS industry code

Aerospace Plating and Anodizing ServicesThis subcontract for Aerospace Plating and Anodizing Services supports prime contractors on DLA Weapons Support ASC missile projects. The scope of work involves providing surface treatments for mounting plates, specifically requiring electrodeposited cadmium plating according to SAE AMS-QQ-P-416 Type II/Class 3 and anodic coatings per MIL-A-8625, with cleaning performed under TT-C-490 Method I or VI. The project is managed under the Department of Defense and requires strict adherence to CMMC Level 2 and ITAR/EAR compliance standards. Performance will take place in New Cumberland, Pennsylvania, with a response deadline set for October 30, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Industrial Coating and Surface TreatmentThis subcontract opportunity involves providing specialized surface treatments, plating, and coatings for machined sheave components supporting DLA Troop Support projects. The selected contractor will utilize industrial plating or powder coating equipment to apply finishes according to technical drawings, ensuring all components are delivered ready for assembly. A critical requirement of the performance is strict adherence to DFARS 252.223-7008, which prohibits the use of Hexavalent Chromium. The project is issued by the Department of Defense under NAICS code 332813 and is designated as a Total Small Business Set-Aside. Performance will take place in Tracy, California. Interested parties must submit their responses by November 2, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 7 hours ago

DEADLINE

Passivation of CRES 304 Aerospace FittingsThis subcontract involves the chemical passivation of 108 CRES 304 tube reducer unions for the Department of Defense under the DLA Weapons Support Fluid Handling Division. The selected contractor will utilize industrial chemical baths to remove free iron and contaminants from the stainless steel surfaces, ensuring all work adheres to strict aerospace standards for 300 series stainless steel. The project requires the contractor to hold aerospace-grade chemical processing certifications to ensure compliance and quality. Performance will take place in Cherry Point, and the final deliverable consists of 108 fully passivated tube reducer unions.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 7 hours ago

DEADLINE

Phosphate/Manganese Coating ServicesThis subcontract for Phosphate/Manganese Coating Services involves providing specialized surface treatments for steel accelerators to support prime contractors delivering DLA supply contracts. The scope of work requires the application of manganese coating over zinc options in strict accordance with military specifications. Performance will take place in Albany, Georgia, under the oversight of the Department of Defense, specifically the DLA Weapons Support Land Supplier Operations Vehicle Support. The contractor must ensure full compliance with DFARS 252.223-7008 regarding the use of hexavalent chromium and adhere to all ITAR and EAR regulations governing defense articles. This effort falls under NAICS code 332813 and focuses on the delivery of high-specification coated steel components. Interested parties must respond by November 2, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 7 hours ago

DEADLINE

Chemical Agent Resistant Coating (CARC) and Phosphate Finishing

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 7 hours ago

DEADLINE

Aerospace-Grade Finishing and Coating ServicesThis subcontract for Aerospace-Grade Finishing and Coating Services involves performing specialized surface treatments for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires the application of finishes to aerospace components in strict accordance with the DLA Master List of Technical and Quality Requirements, engineering notes in document 200415485, and Reference Drawing NR 98897. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332813 for the Department of Defense. Due to the nature of the aerospace components, the contractor must maintain full ITAR and EAR compliance. The final deliverable consists of finished, coated aerospace components meeting all specified technical standards.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

Specialized Metal Finishing and CoatingThis subcontract for Specialized Metal Finishing and Coating supports the DLA Weapons Support Land Supply Chain by providing protective and decorative finishes for Bell Crank components. The contractor is responsible for applying coatings in strict accordance with STP58-405, STP59-201, STP59-301, and STP51-400 standards, utilizing specific materials including LS3859 I/L/0 LS35085 and STP51-400 I/L/0 DS30003. All work must adhere to prohibitions regarding ozone-depleting chemicals and meet all cited technical specifications. The project is managed under NAICS code 332813 and will be performed at Robins Air Force Base. Interested parties must submit their responses by November 2, 2026. This effort is designed for prime contractors to ensure the durability and specification compliance of critical defense components.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

Aerospace Component Coating ServicesThis subcontract for Aerospace Component Coating Services involves the supply and application of specialized protective coatings to machined gas chambers for prime contractors under DLA supply contracts. The scope of work requires applying these coatings to assembled units utilizing chemical treatment tanks or industrial coating booths, ensuring all processes strictly adhere to military specifications and the provided technical data package. Managed by the Department of Defense through DLA Dist San Joaquin, the performance of this contract will take place in Tracy, California. The opportunity was posted on October 22, 2026, with a response deadline of November 2, 2026, falling under NAICS code 332813 for the delivery of completed coated gas chamber assemblies.

DLA DIST SAN JOAQUIN

POSTED

about 7 hours ago

DEADLINE

Aerospace Surface Treatment and FinishingThis subcontract for Aerospace Surface Treatment and Finishing involves applying protective coatings for prime contractors on DLA Weapons Support ASC projects. The scope of work focuses on performing chemical conversion coating, anodizing, or specialized aerospace plating for Case Assemblies under part number 94937-2, utilizing chemical baths, plating tanks, and curing ovens. The project is managed by the Department of Defense through the DLA Weapons Support ASC Supplier OEM Division, with performance taking place at Tinker AFB. To qualify, contractors must maintain ISO 9001:2015 certification and ensure full compliance with aerospace surface finish standards. The response deadline for this opportunity is October 30, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 7 hours ago

DEADLINE

Specialized Finishing/Coating for Defense FastenersThis subcontract opportunity involves providing specialized finishing and coating services for defense fasteners supporting the DLA Weapons Support ASC Commodities Division. The selected contractor will be responsible for performing heat treatment, plating, or corrosion-resistant coatings on bolts identified by NSN 5306-00-813-8527. All work must be executed according to specific technical data, with the contractor utilizing industrial plating baths or heat-treatment furnaces to test and certify coating hardness and thickness before delivering the finished products to the manufacturer. Performance will take place at Tinker AFB, and the contractor must maintain both ISO 9001 and JCP certifications to be eligible. This requirement falls under NAICS code 332813. Interested parties should note the response deadline of October 30, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Cadmium Plating Services

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 7 hours ago

DEADLINE

Specialized Brazing for Shaft AssembliesThis subcontract involves providing high-precision brazing services for shaft components and sub-assemblies to support prime contractors under the DLA Weapons Support Land Supply Chain. The work must be executed in strict accordance with AWS C3.4 and AWS C3.5 standards, which replace the previous MIL-B-7883 Type I and Type III specifications. Performance of these services will take place in New Cumberland, Pennsylvania. To be eligible for this project, contractors must maintain JCP certification and ensure full compliance with ITAR and EAR export control regulations. The opportunity was posted on October 22, 2026, with a response deadline of November 2, 2026. The project falls under NAICS code 332813 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

Same awarding agency

Supply of MIL-DTL-38999 Electrical Receptacle ConnectorsThis subcontract involves the supply of eight electrical receptacle connectors, identified by NSN 5935012092238, for prime contractors working on projects for the DLA Weapons Support Active Devices Division. The contractor is responsible for manufacturing or sourcing these connectors in strict accordance with MIL-DTL-38999/40B and MIL-DTL-38999N specifications, as well as Qualified Products List requirements. All materials must be packaged following RP001 and MIL-STD-129 standards. To be eligible, the provider must maintain QPL qualification and ensure full compliance with the Buy American Act. The performance of this contract is centered in New Cumberland, Pennsylvania, under NAICS code 334418. The response deadline for this opportunity is November 2, 2026.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supply of Electrical Receptacle Connectors (NSN 5935-01-654-1856)This subcontract involves the procurement and delivery of 12 electrical receptacle connectors, specifically COMSACO, LLC part number 404217-101 under NSN 5935016541856. The contract supports prime contractors delivering to the Department of Defense via the DLA Weapons Support Active Devices Division. All materials must be packaged in strict accordance with MIL-STD-2073-1E and RP001 DLA Packaging Requirements. The performance of this contract will take place in New Cumberland, Pennsylvania. Interested parties must maintain an active SAM registration to be eligible. The solicitation was posted on October 22, 2026, with a response deadline set for November 2, 2026, falling under NAICS code 334417.

Electronic Connector Manufacturing

POSTED

about 7 hours ago

DEADLINE

Electronic Shielding Gasket Manufacturer/SupplierThis subcontract involves the manufacture and supply of electronic shielding gaskets to support prime contractors for the DLA Weapons Support Active Devices Division. The supplier is responsible for providing 16 units of NSN 5999-01-250-5876, which must be manufactured or sourced according to approved part numbers from specific vendors including Parker-Hannifin, Majr Products, Raytheon, Tech Etch, or Technical Wire Products. Delivery is designated as FOB Origin with performance taking place in New Cumberland. Strict adherence to the DLA Master List of Technical and Quality Requirements is mandatory, along with compliance with DFARS 252.204-7012 cybersecurity standards. The opportunity falls under NAICS code 339991 and requires responses by November 2, 2026.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 7 hours ago

DEADLINE

Precision Manufacturing of Connector Adapters

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 7 hours ago

DEADLINE

MIL-SPEC Packaging and Marking Services

Freight Transportation Arrangement

POSTED

about 7 hours ago

DEADLINE

Radio Frequency Interference (RFI) Filter Manufacturing

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supply of Electrical Contacts (NSN 5999010397213)This subcontract involves the manufacture or sourcing of 371 specialized electrical contacts under NSN 5999010397213 for the DLA Weapons Support Active Devices Division. The supplier is responsible for providing commercial off-the-shelf components that strictly adhere to MIL-STD-129 marking, RP001 packaging, and quality standards defined by MIL-STD-1916 or ASQ H1331. Additionally, the contractor must ensure full compliance with the Buy American Act and the Berry Amendment. The completed order is to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. This procurement falls under NAICS code 335931 and is managed by the Department of Defense. Interested parties must respond by the deadline of November 2, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supply of Connector Adapters (NSN 5935004021153)This subcontract involves the supply of 26 specialized connector adapters, identified by NSN 5935004021153, for prime contractors working on projects for the DLA Weapons Support Active Devices Division. The contractor is responsible for manufacturing or sourcing the items while adhering to strict quality sampling standards per MIL-STD-1916 or ASQ H1331. Additionally, all units must be marked according to MIL-STD-129 and packaged in compliance with MIL-STD-2073-1E. The agreement explicitly prohibits the use of additive manufacturing in the production of these components. Delivery is required FOB Origin to DLA Distribution San Joaquin, located in Tracy, California. The project falls under NAICS code 335999 and is managed by the Department of Defense.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supply of Electrical Receptacle Connectors (MS3402D44-52P)This subcontract involves the supply of eight electrical receptacle connectors, specifically part MS3402D44-52P under NSN 5935005971462, for the DLA Weapons Support Active Devices Division. The contractor is required to source these components from the Qualified Products List for FSC 5935 and must maintain the necessary QPL certification. All items must be delivered FOB Origin and undergo preservation and packaging in strict accordance with MIL-DTL-55330, MIL-STD-2073-1E, and MIL-STD-129 standards. The project falls under NAICS code 334419 and is managed by the Department of Defense. Performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 2, 2026, to ensure all technical and certification requirements are met for the delivery of these specialized components.

Other Electronic Component Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supply of Electrical Plug Connectors (NSN 5935015017778)This subcontract involves the supply of 14 specialized electrical plug connectors, specifically part number M83723/69W1610N, for the DLA Weapons Support Active Devices Division. Classified as a Critical Application Item, the components must meet strict QPL certification requirements for FSC 5935 connector assemblies and contacts. The contractor is responsible for manufacturing or sourcing the units and ensuring all items are marked according to RQ017 and packaged in compliance with RP001 and MIL-STD-129 standards. The project falls under NAICS code 334417 and will be performed in San Diego, California. Interested parties must respond by November 2, 2026, to support prime contractors delivering these essential components to the Department of Defense.

Electronic Connector Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supply of MIL-SPEC Electrical Plug Connectors (NSN 5935-01-328-1307)This subcontract involves the supply of two specialized electrical plug connectors, part number M28840/29CE1BAP2, for the DLA Weapons Support Active Devices Division. The components must strictly adhere to MIL-DTL-28840/29G(1) Revision G and MIL-DTL-28840(3) Revision E standards. To be eligible, the provider must be a QPL-approved manufacturer or an authorized distributor, ensuring all items are packaged according to MIL-DTL-55330 and MIL-STD-2073-1E specifications. The procurement falls under NAICS code 335911 and is managed by the Department of Defense. Performance for this contract is located in New Cumberland, Pennsylvania. Interested parties must submit their responses by the deadline of November 2, 2026.

Storage Battery Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supply of Electrical Connector Shield Terminations (NSN 5935012733070)This subcontract involves the procurement and delivery of 182 electrical connector shield terminations for the DLA Weapons Support Active Devices Division. The units must strictly adhere to NSN 5935012733070 specifications and be sourced from approved manufacturers, specifically Raytheon, Amphenol, or Souriau. All items must be packaged and marked in accordance with MIL-STD-129 and RP001 standards, while maintaining full compliance with the Buy American Act. The contract requires the delivery of the units FOB Origin to the DLA Distribution DDSP located in New Cumberland, Pennsylvania. This requirement falls under NAICS code 334417 and is managed by the Department of Defense. Interested parties must note the response deadline of November 2, 2026.

Electronic Connector Manufacturing

POSTED

about 7 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS