Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Aerospace Hardware Inspection and Certification

Open

Federal

Response Deadline11/13/2026, 09:00:00 AM PST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Aerospace Hardware Inspection and Certification involves providing independent quality assurance, inspection, and acceptance testing for prime contractors supporting DLA Weapons Support ASC projects. The scope of work focuses on the delivery of inspection reports and certifications of compliance for 127 pins, utilizing zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. The selected provider must hold ASQ or equivalent certification and possess the capability to use precision measurement tools, such as CMMs, micrometers, and calipers calibrated to aerospace standards. Performance will take place in Tracy, California, under NAICS code 541380 for the Department of Defense.

General Info

Aerospace hardware inspection and certification for 127 pins in Tracy, California for DoD.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

NAICS

541380 - Testing Laboratories and Services

Place of Performance

TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A7-27-T-3313.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PIN, GROOVED, HEADLESS

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 6

subcontract

Response DeadlineNov 13

Submission deadline

Response Deadline

11/13/2026, 09:00:00 AM PSTin 7 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs independent quality assurance, inspection, and acceptance testing for prime contractors on DLA Weapons Support ASC projects. Executes zero-based sampling plans per MIL-STD-1916 or ASQ H1331 using precision measurement tools including micrometers, calipers, and CMM calibrated to aerospace standards. Requires ASQ or equivalent certification. Delivers inspection reports and certification of compliance for 127 pins.

Similar Contracts

Same NAICS industry code

Designated Substances Survey (DSS)This subcontract involves providing specialized sampling and analysis for hazardous materials on behalf of prime contractors for the Government of Ontario Ministry of Energy and Mines. The primary objective is to conduct Designated Substances Surveys across eight different mine sites to identify the presence of asbestos, lead, and PCBs. The selected provider must employ a certified hazardous materials surveyor and ensure all activities maintain strict compliance with the Occupational Health and Safety Act. The final deliverable for this engagement consists of comprehensive Designated Substances Survey reports for each of the eight designated sites.

Energy and Mines

POSTED

about 5 hours ago

DEADLINE

Quality Assurance Representative (QAR) Support/InspectionThis subcontract opportunity is for Quality Assurance Representative support and inspection services benefiting the Department of Defense under the DLA Weapons Support LSO Combat Vehicles and Armament. The selected provider will perform specialized quality inspections and verifications for prime contractors, specifically focusing on critical gun parts and military-grade gun mounts. Work is conducted at the manufacturer's facility using precision measurement tools to ensure all unique requirements are met prior to formal acceptance or rejection. All activities must adhere strictly to DLA and DoD Quality Assurance Representative standards, culminating in the delivery of detailed inspection reports. The place of performance is located in Fort Campbell, Kentucky. Interested parties should note the response deadline of November 16, 2026, for this effort categorized under NAICS code 541380.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 7 hours ago

DEADLINE

Aerospace Dimensional Inspection and FAT ValidationThis subcontract opportunity, titled Aerospace Dimensional Inspection and FAT Validation, is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div. The project involves providing dimensional verification and quality assurance services for prime contractors, specifically focusing on the validation of First Article Tests and production lots. Work is performed at Tinker AFB and requires the use of CMM or optical comparators to ensure compliance with ASME Y14.31 and MIL-STD-1916 standards, including the verification of Digital Mylar data and grid unit tolerances. The contract is designated as a Total Small Business Set-Aside under NAICS code 541380. To be eligible, providers must maintain ISO 9001:2015 certification and are responsible for delivering detailed inspection reports and certifications of conformance. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

Third-Party Quality Inspection and Certification (Zero-Based Sampling)This subcontract for Third-Party Quality Inspection and Certification involves providing independent inspection and acceptance services at the origin for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires the execution of zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331 to verify bare item marking and close tolerance specifications. To ensure accuracy, the contractor must utilize precision measurement tools such as optical comparators or CMM and deliver formal certification of acceptance along with detailed inspection reports. The project is managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division and is categorized under NAICS code 541380. Performance of these services will take place at Robins Air Force Base. Interested parties should note the response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

First Article Testing and Validation for Electrical Assemblies

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

First Article Test (FAT) ValidationThis subcontract involves providing technical testing and validation services for prime contractors under DLA supply contracts, specifically managed by the Department of Defense agency DLA Weapons Support LSO Combat Vehicles and Armament. The primary objective is to conduct First Article Testing to ensure that armor meets rigorous fragmentation and small arms resistance standards. These evaluations are performed using specialized ballistic testing ranges and fragmentation simulation equipment. The selected provider is responsible for delivering comprehensive test reports and validation data that adhere to DLA portal technical standards, culminating in the delivery of the FAT Certification. The work is designated under NAICS code 541380 and is to be performed in New Cumberland. The solicitation was posted on November 6, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 7 hours ago

DEADLINE

Third-Party Quality Assurance and Source Inspection ServicesThis subcontract for Third-Party Quality Assurance and Source Inspection Services supports the Department of Defense DLA Weapons Support ASC. The selected provider will perform source inspections and quality verification for prime contractors, specifically focusing on Latch Assembly compliance. Technical requirements include the use of zero-based sampling plans according to MIL-STD-1916 or ASQ H1331 and the validation of dimensions against NAVSEA 80064 series drawings. The project is based in San Diego and requires the contractor to hold JCP certification to access export-controlled technical data. Key deliverables include signed inspection reports and certifications of compliance. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026, under NAICS code 541380.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

First Article Test (FAT) and Quality InspectionThis subcontract, issued by the Department of Defense DLA Weapons Support ASC Commodities Division, focuses on First Article Testing and quality inspection services for prime contractors. The scope of work involves executing FAT per CLIN 0002 using zero-based sampling plans according to MIL-STD-1916 or ASQ H1331, as well as verifying mercury containment in compliance with NAVSEA 5100-003D. To ensure technical precision, the contractor must utilize RF signal analyzers, impedance testers, and continuity testers, while maintaining alignment with SAE AS9003 or ISO 9001 quality standards. The final deliverables include a comprehensive FAT Report and first article certification. The opportunity is a total small business set-aside under NAICS code 541380, with the place of performance located in Greensboro, North Carolina. Interested parties must adhere to the response deadline of November 13, 2026. This contract ensures that critical weapon support components meet rigorous military and quality specifications before full-scale production.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

First Article Test (FAT) Evaluation and CertificationThe First Article Test Evaluation and Certification subcontract, issued by the DLA Weapons Support Land Supply Chain for the Department of Defense, requires the performance of First Article Testing to validate the acceptability of items for prime contractors. The selected provider will conduct rigorous testing on the initial production unit to ensure compliance with technical specifications, utilizing specialized measurement equipment to verify tolerances. The scope of work includes close coordination with the Engineering Support Activity for final evaluations, culminating in the delivery of a comprehensive FAT report and a formal acceptability determination. This effort is categorized under NAICS code 541380 and is to be performed in Albany, Georgia.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

Zero-Based Sampling and Quality Inspection ServicesThis subcontract opportunity is for Zero-Based Sampling and Quality Inspection Services supporting the Department of Defense DLA Weapons Support ASC Supplier Oper OEM Division. The selected provider will perform independent quality verification and zero-based sampling for prime contractors, utilizing precision measurement tools to verify splined tolerances. Work involves executing sampling plans for critical, major, and minor attributes in accordance with MIL-STD-1916 or ASQ H1331, culminating in the delivery of inspection reports and certifications of conformance for 15-piece lots. The project is designated as a Total Small Business Set-Aside under NAICS code 541380 and will be performed at Hill AFB. Interested parties should note the response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 7 hours ago

DEADLINE

First Article Testing and CertificationThis subcontract, titled First Article Testing and Certification, is issued by the Department of Defense under the DLA Weapons Support Land Supply Chain. The primary objective is to perform testing and validation of the first production unit for prime contractors on Defense Logistics Agency supply contracts. The scope of work involves verifying material properties and dimensions against referenced drawings and the Technical Data Package Rev A Gen 1, utilizing coordinate measuring machines and various metrology tools. The successful contractor is required to deliver a validated first-article unit along with a certified First Article Testing report. Performance will take place at Robins Air Force Base. The solicitation was posted on November 6, 2026, with a response deadline of November 16, 2026, falling under NAICS code 541380.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

First Article Test (FAT) ServicesThis subcontract opportunity is for First Article Test (FAT) Services supporting the DLA Weapons Support Land Supply Chain. The selected provider will perform validation testing on the first production unit delivered by prime contractors to ensure full adherence to Statement of Work specifications. Key technical requirements include verifying dimensions, tension, and material integrity through the use of precision measurement tools and load or compression testing machinery, all conducted in accordance with DLA Master List quality standards. The final deliverables for this effort are a comprehensive FAT Report and a certification of compliance. The project is designated as a Total Small Business Set-Aside under NAICS code 541380 and will be performed in Greensboro, North Carolina. Interested parties must submit their responses by November 16, 2026. This procurement is managed by the Department of Defense on behalf of the DLA Weapons Support Land Supply Chain.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Precision Aerospace Component Manufacturing - Structural Aircraft FittingThis subcontract involves the precision CNC machining of a structural aircraft fitting, specifically part number 140T2907-17, for the Department of Defense under the DLA Weapons Support ASC. The manufacturing process must strictly adhere to TDP Rev A Gen 1 and Reference QAP 13873. The final deliverable consists of one finished fitting accompanied by all necessary airworthiness certifications and comprehensive documentation. To qualify for this project, the manufacturer must maintain ISO 9001:2015 certification and FAA Airworthiness Approval. Additionally, the contractor is required to ensure full supply chain traceability in compliance with DLA Directive C03. Performance for this contract will take place in New Cumberland, Pennsylvania.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

Bushing Blank Manufacturing and SupplyThis subcontract involves the manufacture and supply of 70 bushing blanks for prime contractors supporting DLA Weapons Support projects. The contractor must produce these units according to specific technical data, ensuring that no additive manufacturing processes are used and that all items are free of mercury. Deliveries are to be made to the DDSP New Cumberland Facility, with packaging strictly adhering to MIL-STD-2073-1E and MIL-STD-129 standards. To qualify, the provider must maintain a quality management system certified to SAE AS9003 or ISO 9001 and meet CMMC Level 2 cybersecurity requirements. Additionally, the contractor must comply with the US/Canada Joint Certification Program for export control. The project falls under NAICS code 332999 and is managed by the Department of Defense.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

Aircraft Structural Plate Manufacturer/SupplierThis subcontract involves the manufacture and supply of eight structural aircraft plates meeting NSN 1560-00-328-4992 specifications for prime contractors under DLA Distribution supply contracts. The project is managed by the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place in New Cumberland. The supplier is responsible for sourcing or manufacturing the plates and ensuring all hazardous materials are packaged according to TQ requirement IP025. Additionally, all packaging and labeling must strictly adhere to MIL-STD-129 standards. Delivery of the units is required on a FOB Origin basis.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supply of Aerospace Structural Alloy StockThis subcontract involves the supply of aerospace-grade structural alloy plate stock for prime contractors supporting DLA Weapons Support ASC projects. The raw materials must strictly adhere to the specifications outlined in Drawing NR 81205 4-3904 and require full material traceability along with Mill Test Reports to maintain compliance with rigorous aerospace standards. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 336413 for the Department of Defense. Performance will take place at Tinker AFB, with a response deadline set for November 13, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

Precision Machining of Structural Aircraft PlatesThis subcontract involves the precision fabrication of 15 structural aircraft plates for prime contractors supporting DLA Weapons Support ASC projects. The work requires the use of CNC equipment to machine parts according to Drawing NR 81205 4-3904 and ASME Y14.31 standards, maintaining strict tolerances between 0.005 and 0.014 inches. Additionally, the contractor must perform bare item marking per RQ017 and complete a First Article Test to ensure quality compliance. The project is a total small business set-aside under NAICS code 336413, with performance taking place at Tinker AFB. To be eligible, the provider must hold ISO 9001:2015 and CMMC Level 2 certifications. The contract was posted on November 6, 2026, with a response deadline of November 13, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

Military-Grade Packaging and Labeling ServicesThis subcontract for Military-Grade Packaging and Labeling Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves the specialized packaging of non-hazardous materials according to ASTM D3951 and the marking of all packaging in compliance with MIL-STD-129. Additionally, the provider must execute palletization following RP001 DLA Packaging Requirements and ensure all hazardous materials meet TQ Requirement IP025. The final deliverables must be shipment ready for FOB Origin transport to the DDSP in New Cumberland. This effort falls under NAICS code 488510 and is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div. The response deadline for this opportunity is November 13, 2026.

Freight Transportation Arrangement

POSTED

about 7 hours ago

DEADLINE

Manufacturing of Troop Compartment Speaker BezelsThis subcontract involves the manufacturing of precision troop compartment speaker bezels for the DLA Weapons Support ASC. The contractor is responsible for fabricating components in accordance with Basic Drawing NR 98897 4E20059 Revision C and TDP Rev A Gen 3. The final deliverables include six finished bezels under NSN 1560-00-373-6353 and two units dedicated to First Article Testing to be delivered to Robins AFB in Georgia. To qualify for this project, the provider must maintain ISO 9001:2015 certification and ensure full compliance with ITAR and EAR regulations. The work is categorized under NAICS code 336413 and is performed for the Department of Defense. Performance of the contract is centered in New Cumberland, Pennsylvania.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supply of Grooved Clamp Couplings (P/N BACC10DU350ABE)This subcontract involves the manufacture or procurement of 57 grooved clamp couplings, part number BACC10DU350ABE, for prime contractors supporting DLA Weapons Support ASC projects. The components must be produced in accordance with drawings BACC10DU REV AD and 81205 BACC10DU Revision AE, with final delivery designated for Tinker AFB. Strict adherence to packaging and palletization standards is required, specifically ASTM D3951, MIL-STD-129, and RP001. To ensure quality and regulatory compliance, the provider must maintain SAE AS9100 and ISO 9001:2015 certifications. Additionally, the contractor must be part of the US/Canada Joint Certification Program to satisfy ITAR and EAR requirements. This effort falls under NAICS code 336413 and is managed by the Department of Defense.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

Manufacture and Supply of Sling Assembly (NSN 1450-01-548-5666)This subcontract involves the manufacture and supply of 34 Sling Assembly units (NSN 1450-01-548-5666) for prime contractors supporting the DLA Weapons Support ASC. The contractor is responsible for fabricating the assemblies according to Basic Drawing NR 53711 7068433, Revision A, and must ensure quality through sampling and inspection conducted per MIL-STD-1916 or ASQ H1331. Final products must be packed in accordance with MIL-STD-2073-1E and delivered to DDSP New Cumberland. To be eligible for this contract, the provider must maintain JCP certification for handling export-controlled data and demonstrate compliance with NIST SP 800-171 standards. The project falls under NAICS code 336415 and is managed by the Department of Defense. Interested parties must adhere to the specified response deadline of November 13, 2026.

Guided Missile and Space Vehicle Propulsion Unit and Propulsion Unit Parts Manufacturing

POSTED

about 7 hours ago

DEADLINE

Television Camera Supply (NSN 5820016804971)This subcontract involves the supply of six television cameras, identified by NSN 5820016804971, to prime contractors supporting the DLA Weapons Support ASC Supplier Oper AE and AF Div. The performance of this contract takes place in Tracy, California, under NAICS code 334220. The supplier must strictly adhere to specific government standards, including RP001 for packaging, RQ017 for physical identification, and RQ011 for the removal of government identification. Additionally, all shipments and storage must comply with MIL-STD-129, and the hardware must be free of covered defense telecommunications equipment as mandated by DFARS 252.204-7018.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supply of Blind Rivets (NSN 5320014677251)This subcontract involves the manufacture and delivery of 300 blind rivets, part number MS90353S0606D, to support prime contractors under the Defense Logistics Agency. The project is managed by the DLA Weapons Support ASC Supplier Oper AE and AF Div within the Department of Defense, with the place of performance located at Tinker AFB. The deliverables must strictly conform to NASM90353 Revision 4 and NASM81177 Revision 2, while adhering to the National Aerospace Standard specifications and the DLA Master List of Technical and Quality Requirements. The contract falls under NAICS code 337920 and is associated with NSN 5320014677251.

Blind and Shade Manufacturing

POSTED

about 7 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Aerospace Component Inspection and Certification

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 7 hours ago

DEADLINE

First Article Testing & Validation Services

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 7 hours ago

DEADLINE

Aerospace Quality Assurance and Sampling Inspection

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Production Lot Testing Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Third-Party Quality Inspection and Sampling

DLA DIST SAN JOAQUIN

POSTED

about 7 hours ago

DEADLINE

First Article Test (FAT) Specialist

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

Dimensional Conformance Inspection for Aerospace Threads

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

First Article Test (FAT) Services

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

First Article Test (FAT) Validation

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 7 hours ago

DEADLINE

Precision Testing and Quality Inspection Services

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 7 hours ago

DEADLINE

DOOR, ACCESS, AIRCRAF

Solicitation # SPE4A7-25-T-0442

Defense Logistics Agency

POSTED

about 7 hours ago

DEADLINE

TEST, IGNITABILITY/FLASHPT, D001, LIQUID

Solicitation # SP450027F0545

Defense Logistics Agency

POSTED

about 7 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS