Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Aerospace Plating and Surface Finishing

Active

Federal

Response Deadline10/21/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Aerospace Plating and Surface Finishing supports the DLA Weapons Support Aviation Supply Chain by providing specialized surface treatments, coatings, and plating for actuating cylinders. The scope of work involves applying protective coatings to machined parts through chemical vapor deposition or industrial plating tanks to ensure critical corrosion resistance. All delivered cylinder components must be packaged in accordance with ASTM D3951 and MIL-STD-129 standards. To be eligible, contractors must hold SAE AS9003 or ISO 9001 certification. The project falls under NAICS code 332813 and is managed by the Department of Defense. Performance will take place in New Cumberland, Pennsylvania, with a response deadline set for October 21, 2026.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

NAICS

332813 - Electroplating, Plating, Polishing, Anodizing, and Coloring

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A1-27-T-0115.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CYLINDER, ACTUATING,

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 13

subcontract

Response DeadlineOct 21

Submission deadline

Response Deadline

10/21/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies specialized surface treatments, coatings, and plating for actuating cylinders for prime contractors on DLA Weapons Support Aviation Supply Chain projects. Applies protective coatings to machined parts using industrial plating tanks or chemical vapor deposition to ensure corrosion resistance. Requires SAE AS9003 or ISO 9001 certification and packaging per ASTM D3951 and MIL-STD-129. Delivers surface-treated cylinder components.

Similar Contracts

Same NAICS industry code

Aerospace Finishing and Surface TreatmentThe Aerospace Finishing and Surface Treatment subcontract involves providing specialized surface treatments and coatings for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires the application of coatings according to TDP specifications, with a strict mandate to adhere to DFARS 252.223-7008 regarding the prohibition of Hexavalent Chromium. The contractor is responsible for performing quality inspections to ensure proper coating thickness and adhesion before delivering finished components ready for final assembly. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 332813 for the Department of Defense. The solicitation was posted on October 13, 2026, with a response deadline of October 28, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

Cadmium Plating Services for Carbon Steel Hardware

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 23 hours ago

DEADLINE

CARC and Phosphate Coating ServicesThis subcontract for the DLA Weapons Support Land Supply Chain involves the application of chemical agent resistant and anti-corrosive coatings for prime contractors. The scope of work specifically requires the application of CARC and phosphate coatings in accordance with DCSC Drawing 16236 CS-2300-0001 to produce finished, coated mounting plates. Technical requirements include the use of high-temperature curing processes and a strict prohibition against Class I ozone-depleting chemicals. The project is managed under NAICS code 332813 and requires the provider to hold a Phosphate Coating Supplier Certification. Performance will take place in New Cumberland, Pennsylvania. Interested parties must note the response deadline of October 26, 2026, for this Department of Defense initiative.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

Aerospace Component Finishing and PlatingThis subcontract for Aerospace Component Finishing and Plating supports prime contractors under the DLA Weapons Support Agency. The scope of work involves providing specialized surface treatment and plating for aerospace components, specifically requiring the application of finishes and coatings in accordance with Drawing 65651-06358 Rev H. To ensure safety and regulatory compliance, the provider must supply Safety Data Sheets for all hazardous materials per Federal Standard No. 313 and obtain ITAR/EAR export control approval to access necessary technical data. Managed under NAICS code 332813 for the Department of Defense, the contract requires the delivery of finished components that strictly meet all drawing specifications. The place of performance is located in Dulles, Virginia. Interested parties should note the response deadline of October 21, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 23 hours ago

DEADLINE

Specialized Coating and Finishing for Valve ComponentsThis subcontract for Specialized Coating and Finishing for Valve Components involves performing surface treatments and coatings for prime contractors supporting DLA Distribution San Joaquin valve projects in Tracy, California. The selected provider must apply finishes according to specific technical drawings and ensure strict adherence to DFARS 252.223-7008, which prohibits the use of Hexavalent Chromium. The final objective is the delivery of finished components that are fully prepared for final assembly. Due to the nature of the technical data involved, the contractor is required to maintain ITAR and EAR compliance and achieve CMMC Level 2 certification. This opportunity falls under NAICS code 332813 and is managed by the Department of Defense. Interested parties should note the response deadline of October 26, 2026.

DLA DIST SAN JOAQUIN

POSTED

about 23 hours ago

DEADLINE

Aerospace Finishing and Non-Destructive Testing (NDT)This subcontract for the Department of Defense, specifically the DLA Weapons Support ASC Supplier OEM Division, involves providing specialized aerospace finishing and non-destructive testing services. The contractor is responsible for applying aerospace-grade coatings and performing critical structural integrity verifications using X-Ray, Dye Penetrant, or Magnetic Particle testing on Critical Safety Items. All work must adhere to zero-based sampling inspection standards per MIL-STD-1916 or ASQ H1331, with final deliverables consisting of certified finished bolts and comprehensive test reports. To qualify for this project, the provider must maintain NADCAP and ISO 9001:2015 certifications. The performance of the contract is located in Cherry Point, North Carolina, under NAICS code 332813. Interested parties must respond by October 21, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 23 hours ago

DEADLINE

Industrial Coating and FinishingThis subcontract for Industrial Coating and Finishing supports the DLA Weapons Support Land Supplier Opns Engines. The scope of work involves performing surface treatment and plating for prime contractors, specifically applying protective coatings to telescoping tubes. All work must adhere to RA001 technical requirements and MIL-SPEC standards, with a critical focus on maintaining coating thickness to ensure telescoping tolerances are met for the final delivered weldments. The project is managed under NAICS code 332813 for the Department of Defense, with the place of performance located in Tracy, California. Interested parties should note the response deadline of October 26, 2026, for this specialized finishing requirement.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

about 23 hours ago

DEADLINE

Precision Fastener Finishing and CoatingThe Precision Fastener Finishing and Coating subcontract involves providing specialized surface treatment, plating, and heat treatment services for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work focuses on applying specific coatings or plating to close-tolerance bolts identified by NSN 5306011132270, ensuring all processes adhere to the DLA Master List of Technical and Quality Requirements. The contractor is responsible for utilizing industrial plating baths and heat-treatment ovens to achieve precise coating thickness while maintaining strict dimensional integrity. Performance of these services will take place in New Cumberland, Pennsylvania. This requirement falls under NAICS code 332813 and concludes with the delivery of finished and coated bolts.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

Surface Treatment and Finishing for Hydraulic ComponentsThis subcontract involves providing specialized surface treatment and finishing services for hydraulic components supporting the DLA Weapons Support Fluid Handling Division. The scope of work focuses on applying aerospace-approved plating, passivation, or anodizing to P/N 198304 cylinder blocks to guarantee essential seal integrity and corrosion resistance. Additionally, the contractor is responsible for verifying surface roughness in accordance with the provided technical data package and delivering the finished coated units. Performance of this contract takes place at Hill AFB and requires the contractor to maintain NADCAP accreditation to ensure industry quality standards. The project is categorized under NAICS code 332813 and was posted on October 13, 2026, with a response deadline of October 21, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 23 hours ago

DEADLINE

Aerospace Surface Treatment and FinishingThis subcontract for Aerospace Surface Treatment and Finishing supports the DLA Weapons Support Fluid Handling Division within the Department of Defense. The scope of work involves performing surface treatments and anodizing on aluminum alloy wheel hubs to prevent corrosion in accordance with strict DoD standards. All operations must be conducted using non-ODC compliant chemical substitutes and anodizing tanks to ensure the total exclusion of Class I Ozone Depleting Chemicals. The project is based at Tinker AFB, zip code 73145-8000, and falls under NAICS code 332813. Interested parties must respond by October 26, 2026, to provide the required surface-treated wheel hubs as specified in the contract requirements.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 23 hours ago

DEADLINE

Phosphate Coating and Surface TreatmentThis subcontract involves providing phosphate coating and surface treatment services for prime contractors supporting the DLA Weapons Support Land Supply Chain. The scope of work focuses on the delivery of coated and corrosion-protected Chamber and Discrim units, specifically requiring manganese phosphate coating performed in accordance with MIL-DTL-53039 and MIL-DTL-64159 standards. Eligible providers must hold the RQ036 Phosphate Coating Supplier Certification and maintain strict compliance with prohibitions regarding ozone-depleting chemicals. The project is associated with NAICS code 332813 and will be performed in Texarkana, Texas. The response deadline for this opportunity is October 26, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

Aerospace Component Finishing and CoatingThe Aerospace Component Finishing and Coating subcontract involves providing specialized surface treatments for aircraft stiffener ribs on behalf of prime contractors for the DLA Weapons Support ASC Commodities Division. The scope of work includes the application of aerospace-grade anodizing, priming, and corrosion control in strict accordance with provided technical drawings. All operations must be performed by a NADCAP accredited provider to ensure the highest quality standards for these critical aircraft components. Compliance is a central requirement of this contract, specifically regarding the management of hazardous materials under 29 CFR 1910.1200(g) and DFARS 252.233-7001. The project is categorized under NAICS code 332813 and will be performed in New Cumberland. The final deliverable consists of finished and coated aircraft ribs that meet all specified aerospace requirements.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

Same awarding agency

First Article Test (FAT) and Certification ServicesThis subcontract for the DLA Weapons Support Aviation Supply Chain involves providing specialized testing and validation services for the first production unit of prime contractors. The scope of work focuses on executing First Article Tests using Coordinate Measuring Machines and pressure or actuation testing rigs to ensure compliance with NSN 1650-01-596-0049 specifications. The final deliverables for this project include one validated unit and a comprehensive FAT Certification Report. To be eligible, contractors must maintain SAE AS9003 or ISO 9001 certification and provide a CMMC Level 2 self-assessment. The work is to be performed in New Cumberland, Pennsylvania. Interested parties must submit their responses by October 21, 2026, under NAICS code 541380.

Testing Laboratories and Services

POSTED

about 23 hours ago

DEADLINE

Precision Machining of Actuating Cylinder ComponentsThis subcontract involves the precision machining, turning, and milling of cylinder housing and internal piston components for the DLA Weapons Support Aviation Supply Chain. The project requires the use of CNC milling and turning centers to process high-tolerance aviation-grade alloys in accordance with NSN 1650-01-596-0049. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332710. To ensure strict adherence to aviation standards, the contractor must maintain SAE AS9003 or ISO 9001 quality systems and utilize MIL-STD-1916 or ASQ H1331 sampling methods. The final deliverable consists of finished machined cylinder components. The solicitation was posted on October 13, 2026, with a response deadline of October 21, 2026.

POSTED

about 23 hours ago

DEADLINE

Structural Aircraft Plate Supply (P/N 70700-77443-108)This subcontract involves the supply of 24 structural aircraft plates, specifically part number 70700-77443-108, for the DLA Weapons Support Aviation Supply Chain. The contractor is responsible for manufacturing or sourcing these units in strict accordance with Sikorsky Aircraft Corporation specifications. Performance of the contract requires adherence to bare item marking per RQ017 and packaging standards defined by MIL-STD-129. To be eligible, the provider must maintain ISO 9001:2015 certification and a CMMC Level 2 self-assessment, while ensuring full compliance with the Buy American Act. The work is categorized under NAICS code 336411 and will be performed in New Cumberland. The response deadline for this requirement is October 21, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

Precision Aviation Shim FabricationThis subcontract for Precision Aviation Shim Fabrication involves the manufacture and supply of 21 precision shims, identified as NSN 5365-01-516-5664, to support DLA Weapons Support Aviation Supply Chain contracts. The fabrication must strictly adhere to the DLA Master List of Technical and Quality Requirements, with a specific prohibition on additive manufacturing unless prior authorization is granted. Delivery of the completed units is required FOB Origin, with performance centered at Tinker AFB. Compliance requirements include adherence to NIST SP 800-171 standards for data security and strict packaging guidelines according to MIL-STD-2073-1E and MIL-STD-129. The project falls under NAICS code 332510 and is managed through the Department of Defense. Interested parties must have responded by the deadline of October 21, 2026.

Hardware Manufacturing

POSTED

about 23 hours ago

DEADLINE

AS9120 Certified Distributor for Critical Safety Items

Industrial Supplies Merchant Wholesalers

POSTED

about 23 hours ago

DEADLINE

Manufacturer of Critical Safety Item (CSI) Machine Bolts

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 23 hours ago

DEADLINE

PLATE, STRUCTURAL, AIRCR

Solicitation # SPE4A1-27-T-0123

Solicitation SPE4A1-27-T-0123, issued by the DLA Weapons Support Aviation Supply Chain, is for the procurement of 24 structural aircraft plates, identified by NSN 1560-01-619-0194 and Sikorsky Aircraft Corporation part number 70700-77443-108. The contract specifies a delivery timeline of 166 days after order, with a need ship date of April 6, 2027, and a required delivery date of December 2, 2027. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contractor must adhere to strict quality and technical standards, including ISO 9001:2015 compliance and tailored higher level contract quality requirements under RQ001. Packaging must follow RP001 and MIL-STD-129, with non-hazardous materials packaged per ASTM D3951 and hazardous materials per TQ requirement IP025. Key regulatory requirements include a CMMC Level 2 Self-Assessment, compliance with the Buy American Act, and the use of the Wide Area WorkFlow system for electronic invoicing and payment. Item Unique Identification is not required for this acquisition.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

SOLENOID, ELECTRICAL

Solicitation # SPE4A1-27-T-0118

Relay and Industrial Control Manufacturing

POSTED

about 23 hours ago

DEADLINE

Solicitation # SPE4A1-27-T-0108

Solicitation SPE4A1-27-T-0108 is issued by the DLA Weapons Support Aviation Supply Chain for the procurement of 21 units of SHIM, identified by NSN 5365-01-516-5664. The requirement is managed under NAICS code 332510 and is designated for delivery to the DLA Distribution Depot Oklahoma at Tinker AFB. The need ship date is April 6, 2027, with an original required delivery date of February 18, 2028, and a delivery lead time of 166 days after award. Shipping is established as FOB Origin under the First Destination Transportation program. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Inspection and acceptance will occur at the destination, with sampling conducted per MIL-STD-1916 or ASQ H1331. Key regulatory requirements include compliance with the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity standards. Invoicing must be processed electronically through the Wide Area WorkFlow system. The solicitation may be a candidate for automated award and includes price evaluation preferences for HUBZone concerns.

Hardware Manufacturing

POSTED

about 23 hours ago

DEADLINE

CYLINDER, ACTUATING,

Solicitation # SPE4A1-27-T-0115

Solicitation SPE4A1-27-T-0115 is a fixed-price procurement issued by the DLA Weapons Support Aviation Supply Chain for the supply of actuating cylinders, identified by NSN 1650-01-596-0049. The requirement consists of a primary order for four units and a separate First Article Test (FAT) requirement for one unit, which must be delivered within 30 calendar days of the contract date. Delivery is specified as FOB Origin, with the final destination being the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific standards for physical identification, bare item marking, and packaging per ASTM D3951 and MIL-STD-129. Quality assurance requires the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001, with sampling conducted according to MIL-STD-1916 or ASQ H1331. Additionally, the contractor must meet CMMC Level 2 self-assessment requirements and comply with various DFARS regulations regarding domestic sourcing, including the Buy American Act and the Berry Amendment. Invoicing and payment are to be processed electronically through the Wide Area WorkFlow (WAWF) system.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

Solicitation # SPE4A1-27-T-0116

Solicitation SPE4A1-27-T-0116 is a request for quotations issued by the DLA Weapons Support Aviation Supply Chain for the procurement of machine bolts, identified by NSN 5306-01-740-1200. The requirement is for 10 units with a need ship date of April 6, 2027, and a final delivery date of July 4, 2027, to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. This item is designated as a Navy Identified Critical Safety Item, requiring strict adherence to quality standards, including SAE AS9100 for manufacturers or AS9120 for dealers and distributors. Inspection is required at the origin per FAR 52.246-2. Offerors must submit quotes via the DIBBS portal and are encouraged to provide quantity ranges to accommodate potential requirement changes. Compliance with the Berry Amendment, the Buy American Act, and domestic material restrictions is mandatory, and any use of non-domestic materials must be disclosed. The solicitation prohibits the use of additive manufacturing unless specifically authorized. Packaging and marking must comply with MIL-STD-129 and RP001 standards. Payment and invoicing will be processed electronically through the Wide Area WorkFlow system. All quotes must represent the offeror's size status and socioeconomic category, and they must certify that no covered telecommunications equipment or services will be provided in the performance of the contract.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 23 hours ago

DEADLINE

Solicitation # SPE4A1-27-T-0111

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 23 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS