Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Industrial Coating and Finishing

Active

Federal

Response Deadline10/26/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Industrial Coating and Finishing supports the DLA Weapons Support Land Supplier Opns Engines. The scope of work involves performing surface treatment and plating for prime contractors, specifically applying protective coatings to telescoping tubes. All work must adhere to RA001 technical requirements and MIL-SPEC standards, with a critical focus on maintaining coating thickness to ensure telescoping tolerances are met for the final delivered weldments. The project is managed under NAICS code 332813 for the Department of Defense, with the place of performance located in Tracy, California. Interested parties should note the response deadline of October 26, 2026, for this specialized finishing requirement.

General Info

Industrial coating and plating for DLA telescoping tubes in Tracy, California by 2026.

Agency

Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

NAICS

332813 - Electroplating, Plating, Polishing, Anodizing, and Coloring

Place of Performance

TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L5-27-T-0219.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

TUBE, TELESCOPING WE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 13

subcontract

Response DeadlineOct 26

Submission deadline

Response Deadline

10/26/2026, 05:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs surface treatment and plating for prime contractors on DLA Weapons Support Land Supplier Opns Engines projects. Applies protective coatings to telescoping tubes per RA001 technical requirements and MIL-SPEC standards. Ensures coating thickness maintains telescoping tolerances. Delivers finished, coated weldments.

Similar Contracts

Same NAICS industry code

Aerospace Finishing and Surface TreatmentThe Aerospace Finishing and Surface Treatment subcontract involves providing specialized surface treatments and coatings for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires the application of coatings according to TDP specifications, with a strict mandate to adhere to DFARS 252.223-7008 regarding the prohibition of Hexavalent Chromium. The contractor is responsible for performing quality inspections to ensure proper coating thickness and adhesion before delivering finished components ready for final assembly. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 332813 for the Department of Defense. The solicitation was posted on October 13, 2026, with a response deadline of October 28, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

Aerospace Plating and Surface FinishingThis subcontract for Aerospace Plating and Surface Finishing supports the DLA Weapons Support Aviation Supply Chain by providing specialized surface treatments, coatings, and plating for actuating cylinders. The scope of work involves applying protective coatings to machined parts through chemical vapor deposition or industrial plating tanks to ensure critical corrosion resistance. All delivered cylinder components must be packaged in accordance with ASTM D3951 and MIL-STD-129 standards. To be eligible, contractors must hold SAE AS9003 or ISO 9001 certification. The project falls under NAICS code 332813 and is managed by the Department of Defense. Performance will take place in New Cumberland, Pennsylvania, with a response deadline set for October 21, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

Cadmium Plating Services for Carbon Steel Hardware

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 23 hours ago

DEADLINE

CARC and Phosphate Coating ServicesThis subcontract for the DLA Weapons Support Land Supply Chain involves the application of chemical agent resistant and anti-corrosive coatings for prime contractors. The scope of work specifically requires the application of CARC and phosphate coatings in accordance with DCSC Drawing 16236 CS-2300-0001 to produce finished, coated mounting plates. Technical requirements include the use of high-temperature curing processes and a strict prohibition against Class I ozone-depleting chemicals. The project is managed under NAICS code 332813 and requires the provider to hold a Phosphate Coating Supplier Certification. Performance will take place in New Cumberland, Pennsylvania. Interested parties must note the response deadline of October 26, 2026, for this Department of Defense initiative.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

Aerospace Component Finishing and PlatingThis subcontract for Aerospace Component Finishing and Plating supports prime contractors under the DLA Weapons Support Agency. The scope of work involves providing specialized surface treatment and plating for aerospace components, specifically requiring the application of finishes and coatings in accordance with Drawing 65651-06358 Rev H. To ensure safety and regulatory compliance, the provider must supply Safety Data Sheets for all hazardous materials per Federal Standard No. 313 and obtain ITAR/EAR export control approval to access necessary technical data. Managed under NAICS code 332813 for the Department of Defense, the contract requires the delivery of finished components that strictly meet all drawing specifications. The place of performance is located in Dulles, Virginia. Interested parties should note the response deadline of October 21, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 23 hours ago

DEADLINE

Specialized Coating and Finishing for Valve ComponentsThis subcontract for Specialized Coating and Finishing for Valve Components involves performing surface treatments and coatings for prime contractors supporting DLA Distribution San Joaquin valve projects in Tracy, California. The selected provider must apply finishes according to specific technical drawings and ensure strict adherence to DFARS 252.223-7008, which prohibits the use of Hexavalent Chromium. The final objective is the delivery of finished components that are fully prepared for final assembly. Due to the nature of the technical data involved, the contractor is required to maintain ITAR and EAR compliance and achieve CMMC Level 2 certification. This opportunity falls under NAICS code 332813 and is managed by the Department of Defense. Interested parties should note the response deadline of October 26, 2026.

DLA DIST SAN JOAQUIN

POSTED

about 23 hours ago

DEADLINE

Aerospace Finishing and Non-Destructive Testing (NDT)This subcontract for the Department of Defense, specifically the DLA Weapons Support ASC Supplier OEM Division, involves providing specialized aerospace finishing and non-destructive testing services. The contractor is responsible for applying aerospace-grade coatings and performing critical structural integrity verifications using X-Ray, Dye Penetrant, or Magnetic Particle testing on Critical Safety Items. All work must adhere to zero-based sampling inspection standards per MIL-STD-1916 or ASQ H1331, with final deliverables consisting of certified finished bolts and comprehensive test reports. To qualify for this project, the provider must maintain NADCAP and ISO 9001:2015 certifications. The performance of the contract is located in Cherry Point, North Carolina, under NAICS code 332813. Interested parties must respond by October 21, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 23 hours ago

DEADLINE

Precision Fastener Finishing and CoatingThe Precision Fastener Finishing and Coating subcontract involves providing specialized surface treatment, plating, and heat treatment services for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work focuses on applying specific coatings or plating to close-tolerance bolts identified by NSN 5306011132270, ensuring all processes adhere to the DLA Master List of Technical and Quality Requirements. The contractor is responsible for utilizing industrial plating baths and heat-treatment ovens to achieve precise coating thickness while maintaining strict dimensional integrity. Performance of these services will take place in New Cumberland, Pennsylvania. This requirement falls under NAICS code 332813 and concludes with the delivery of finished and coated bolts.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

Surface Treatment and Finishing for Hydraulic ComponentsThis subcontract involves providing specialized surface treatment and finishing services for hydraulic components supporting the DLA Weapons Support Fluid Handling Division. The scope of work focuses on applying aerospace-approved plating, passivation, or anodizing to P/N 198304 cylinder blocks to guarantee essential seal integrity and corrosion resistance. Additionally, the contractor is responsible for verifying surface roughness in accordance with the provided technical data package and delivering the finished coated units. Performance of this contract takes place at Hill AFB and requires the contractor to maintain NADCAP accreditation to ensure industry quality standards. The project is categorized under NAICS code 332813 and was posted on October 13, 2026, with a response deadline of October 21, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 23 hours ago

DEADLINE

Aerospace Surface Treatment and FinishingThis subcontract for Aerospace Surface Treatment and Finishing supports the DLA Weapons Support Fluid Handling Division within the Department of Defense. The scope of work involves performing surface treatments and anodizing on aluminum alloy wheel hubs to prevent corrosion in accordance with strict DoD standards. All operations must be conducted using non-ODC compliant chemical substitutes and anodizing tanks to ensure the total exclusion of Class I Ozone Depleting Chemicals. The project is based at Tinker AFB, zip code 73145-8000, and falls under NAICS code 332813. Interested parties must respond by October 26, 2026, to provide the required surface-treated wheel hubs as specified in the contract requirements.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 23 hours ago

DEADLINE

Phosphate Coating and Surface TreatmentThis subcontract involves providing phosphate coating and surface treatment services for prime contractors supporting the DLA Weapons Support Land Supply Chain. The scope of work focuses on the delivery of coated and corrosion-protected Chamber and Discrim units, specifically requiring manganese phosphate coating performed in accordance with MIL-DTL-53039 and MIL-DTL-64159 standards. Eligible providers must hold the RQ036 Phosphate Coating Supplier Certification and maintain strict compliance with prohibitions regarding ozone-depleting chemicals. The project is associated with NAICS code 332813 and will be performed in Texarkana, Texas. The response deadline for this opportunity is October 26, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

Aerospace Component Finishing and CoatingThe Aerospace Component Finishing and Coating subcontract involves providing specialized surface treatments for aircraft stiffener ribs on behalf of prime contractors for the DLA Weapons Support ASC Commodities Division. The scope of work includes the application of aerospace-grade anodizing, priming, and corrosion control in strict accordance with provided technical drawings. All operations must be performed by a NADCAP accredited provider to ensure the highest quality standards for these critical aircraft components. Compliance is a central requirement of this contract, specifically regarding the management of hazardous materials under 29 CFR 1910.1200(g) and DFARS 252.233-7001. The project is categorized under NAICS code 332813 and will be performed in New Cumberland. The final deliverable consists of finished and coated aircraft ribs that meet all specified aerospace requirements.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

Same awarding agency

Supply of V-Belts (NSN 3030005284281)

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 23 hours ago

DEADLINE

Supply of Clamp and Fastener ComponentsThis subcontract involves the manufacture and supply of individual metal clamps and fasteners to support prime contractors for the DLA Weapons Support Land Supplier Opns Engines. The scope of work requires the production or sourcing of high-strength hardware components specifically designed to meet the technical specifications of NSN 5340-01-631-2387. To ensure quality and compliance, the provider must furnish material certifications and Certificates of Conformance that adhere to the DLA Master List of Technical and Quality Requirements. The contract focuses on the delivery of bulk components intended for kitting, with performance taking place in New Cumberland. Operating under NAICS code 332999, the project is managed through the Department of Defense. Interested parties should note the response deadline of October 26, 2026, for this procurement effort.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 23 hours ago

DEADLINE

Supply of Loop Clamp Kits (NSN 5340-01-631-2387)This subcontract involves the procurement or manufacture of five Loop Clamp Kits to support prime contractors for the DLA Weapons Support Land Supplier Opns Engines. The kits must strictly adhere to Oshkosh Defense LLC part number 4184017 and NSN 5340-01-631-2387. All deliverables are required to be shipped FOB Origin from New Cumberland, Pennsylvania. The contractor is responsible for ensuring all packaging and marking comply with MIL-STD-2073-1E and MIL-STD-129 standards, respectively. Additionally, the supplier must maintain full compliance with the Buy American and Berry Amendment requirements. Responses for this opportunity are due by October 26, 2026.

Hardware Retailers

POSTED

about 23 hours ago

DEADLINE

Supply of Electro-Mechanical Linear Actuators (NSN 2920017063960)This subcontract involves the supply of two electro-mechanical linear actuators, specifically Governors America Corporation part number ADG151 under NSN 2920017063960, to support DLA Weapons Support contracts. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contractor must adhere to strict packaging and marking requirements per MIL-STD-2073-1E, MIL-STD-129, and RP001. Additionally, the agreement mandates full compliance with Buy American standards and DFARS 252.204-7012 regulations. The procurement falls under NAICS code 335999 and is managed by the Department of Defense.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 23 hours ago

DEADLINE

Nonmetallic Hose Supplier (NSN 4210016468473)This subcontract involves the manufacture or sourcing of 21 nonmetallic hoses for the Department of Defense, specifically supporting DLA Weapons Support Land Supplier Opns Engines. The required components must adhere to NSN 4210016468473 and Oshkosh Defense LLC part number 4074316. All deliverables must be shipped FOB Origin to DLA Distribution in Barstow, California. Strict adherence to quality and regulatory standards is required, including compliance with MIL-STD-129, RP001, and ASTM D3951 packaging specifications. Additionally, the supplier must ensure full compliance with the Buy American Act and the Berry Amendment. The solicitation was posted on October 13, 2026, with a response deadline of October 26, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 23 hours ago

DEADLINE

Precision Tubing Material SupplyThe Precision Tubing Material Supply subcontract involves the sourcing and delivery of high-tolerance industrial raw tubing materials for prime contractors supporting the DLA Weapons Support Land Supplier Opns Engines. The materials must strictly adhere to NSN 2540015234659 specifications and include Mill Test Reports to verify compliance with the Berry Amendment and the Buy American Act. This Department of Defense project falls under NAICS code 331210 and is performed in Tracy, California. The solicitation was posted on October 13, 2026, with a response deadline of October 26, 2026.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 23 hours ago

DEADLINE

Telescoping Tube Weldment FabricationThis subcontract involves the fabrication, welding, and assembly of two telescoping tube weldments for the Department of Defense under the DLA Weapons Support Land Supplier Opns Engines agency. The work must be performed in Tracy, California, and requires strict adherence to technical requirements specified in NSN 2540015234659 and RA001. The project demands the use of precision welding and alignment jigs and requires the employment of certified welders. All deliverables must comply with MIL-STD-129 and RP001 standards. The solicitation was posted on October 13, 2026, with a response deadline of October 26, 2026, falling under NAICS code 332710.

POSTED

about 23 hours ago

DEADLINE

Military Grade Packaging and Palletization ServicesThis subcontract for Military Grade Packaging and Palletization Services supports the Department of Defense through the DLA Weapons Support Land Supplier Opns Engines agency. The contractor is responsible for the specialized packaging, marking, and palletization of pulleys, ensuring all work adheres to MIL-STD-2073-1E and MIL-STD-129 standards, with palletization governed by RP001. Technical requirements include the application of preservation method 33 and cleaning/drying method 1, utilizing military-grade cushioning and dunnage. The final packaged and palletized goods must be delivered to the DLA Distribution DDSP New Cumberland Facility in New Cumberland. This opportunity falls under NAICS code 493110, with a response deadline set for October 26, 2026.

General Warehousing and Storage

POSTED

about 23 hours ago

DEADLINE

Manufacture of Groove Pulleys (NSN 3020005287993)This subcontract involves the manufacture of 10 finished groove pulleys for the DLA Weapons Support Land Supplier Opns Engines. The contractor is required to fabricate all components in strict accordance with MIL-DTL-7034/2B Revision B and QPL-7034 standards. Adherence to a zero non-conformance acceptance policy is mandatory, and the use of additive manufacturing is prohibited unless specific authorization is granted. To ensure quality and regulatory compliance, the contractor must maintain ISO 9001:2015 certification. Additionally, all materials used in production must comply with the Buy American Act and the Berry Amendment. The performance of this contract will take place in New Cumberland, Pennsylvania.

POSTED

about 23 hours ago

DEADLINE

Defense-Compliant Packaging and ShippingThis subcontract for Defense-Compliant Packaging and Shipping supports prime contractors on DLA Weapons Support Land Supplier projects. The scope of work involves providing specialized packaging and shipping services, ensuring all items are processed according to ASTM D3951 and MIL-STD-129 standards, with palletization following RP001 guidelines. Additionally, the provider is responsible for applying hazard labels in accordance with 29 CFR 1910.1200 and Federal Standard No. 313. The contract requires the coordination of FOB Origin delivery to DLA Distribution Barstow, located in Barstow, California. All shipments must be delivered fully palletized, labeled, and compliant with the specified military and federal regulations. This opportunity falls under NAICS code 488510 and is associated with the Department of Defense.

Freight Transportation Arrangement

POSTED

about 23 hours ago

DEADLINE

Fuel Tank Flange Casting and FabricationThis subcontract involves the metal casting and fabrication of 199 fuel tank flanges under NSN 2910-01-163-3248 for the DLA Weapons Support Land Supplier. The project requires the use of specialized tooling to produce finished flanges that strictly adhere to source-controlled drawings. Performance will take place in Barstow, California, under NAICS code 331511. To ensure quality and security, the contractor must maintain SAE AS9003 or ISO 9001 certification and achieve CMMC Level 2 compliance. Quality assurance mandates sampling according to MIL-STD-1916 or ASQ H1331, with a strict requirement for zero non-conformances. The response deadline for this opportunity is October 26, 2026.

POSTED

about 23 hours ago

DEADLINE

ACTUATOR, ELECTRO-MECHA

Solicitation # SPE7L5-27-T-0209

Solicitation SPE7L5-27-T-0209 is a request for quotations issued by the DLA Weapons Support Land Supplier Opns Engines for the procurement of two electro-mechanical linear actuators. The required items are designated as critical application items, specifically Governors America Corporation part number ADG151 under NSN 2920017063960. Delivery is expected within 161 days, with an original required delivery date of March 29, 2027, and a need ship date of April 6, 2027. Supplies are to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, alongside DLA packaging requirements RP001. Environmental and safety compliance is required, including a prohibition on Class I ozone-depleting chemicals and adherence to the Hazard Communication Standard for any hazardous materials. Administrative requirements include the use of the Wide Area Workflow system for invoicing and payment. Key regulatory clauses are incorporated, including DFARS 252.204-7012 for safeguarding covered defense information and DFARS 252.225-7001 regarding the Buy American and Balance of Payments Program.

Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 23 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS