Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Aerospace Quality Assurance and Dimensional Inspection

Open

Federal

Response Deadline11/13/2026, 12:00:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Aerospace Quality Assurance and Dimensional Inspection supports prime contractors on DLA Weapons Support ASC aircraft projects. The scope of work involves providing dimensional inspection and quality validation for Critical Application Items in accordance with TDP Rev B Gen 3. Specifically, the contractor must verify registration marks and trammel points to a tolerance of +/- 0.005 inches utilizing laser scanning or CMM technology, with final deliverables consisting of Certificates of Conformance and detailed inspection reports. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance located at Robins Air Force Base. Due to the requirement for accessing sensitive technical data, the contractor must maintain CMMC Level 2 certification. This opportunity falls under NAICS code 541380 and has a response deadline of November 13, 2026.

General Info

Aerospace quality assurance and dimensional inspection for DLA aircraft projects at Robins AFB.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

NAICS

541380 - Testing Laboratories and Services

Place of Performance

ROBINS A F B, GA, 31098-1887, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A7-27-T-2976.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PANEL ASSEMBLY, ELEVATO

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 5

subcontract

Response DeadlineNov 13

Submission deadline

Response Deadline

11/13/2026, 12:00:00 PM ESTin 8 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provides dimensional inspection and quality validation for prime contractors on DLA Weapons Support ASC aircraft projects. Verifies registration marks and trammel points to within +/- 0.005 inches using CMM or laser scanning for Critical Application Items per TDP Rev B Gen 3. Requires CMMC Level 2 certification for technical data access. Delivers inspection reports and Certificates of Conformance.

Similar Contracts

Same NAICS industry code

RFQ#9783 Respirable Crystalline Silica Exposure Assessment

Solicitation # RFQ#9783

Management & Training Corporation (MTC) is soliciting bids under RFQ#9783 for a subcontracting opportunity to conduct a Respirable Crystalline Silica Exposure Assessment at the Edison Job Corps Center in Edison, New Jersey. The project requires a qualified industrial hygiene consultant to evaluate the Brick Trade training program, specifically focusing on 27 potentially exposed students and instructors involved in activities such as fire clay mixing and brick cutting. The scope of work includes performing site assessments, implementing a personal breathing-zone air sampling plan, and comparing results against OSHA permissible exposure limits and action levels. Deliverables consist of a written report, laboratory results, exposure calculations, and a prioritized corrective action plan for reducing exposures. This is a fee-for-service contract awarded on a best-value basis. Interested offerors must submit a lump sum bid, a completed supplier packet including Form W-9 and self-certification, proof of insurance, and three professional references by November 6, 2026. The solicitation is open to various small business set-asides, including VOSB, SDVOSB, WOSB, and HUBZone. Awardees must comply with Service Contract Labor Standards for Middlesex County, New Jersey, and adhere to strict federal guidelines regarding the protection of sensitive information and the Buy American Act. First-tier subcontractors with contracts exceeding 45,000 dollars must also provide disclosures regarding government debarment or suspension.

Edison Job Corps

POSTED

about 5 hours ago

DEADLINE

in about 22 hours

Dimensional Inspection and Certification ServicesThis subcontract for Dimensional Inspection and Certification Services supports prime contractors delivering DLA supply contracts through the Department of Defense. The scope of work involves performing dimensional conformance testing on 3,729 units, specifically inspecting Class 3A and 3B threads according to FED-STD-H28/20 and verifying identification markings per MIL-STD-130N. All work must be performed using precision gauging and thread measurement tools calibrated to federal standards. The service provider is required to maintain a quality management system certified under ISO 9001 or SAE AS9003. Key deliverables include detailed inspection reports and certifications of conformance. Performance will take place at Hill AFB, and the solicitation is categorized under NAICS code 541380.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Critical Application Inspection and Testing

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

Valve Component Testing and Quality CertificationThis subcontract for Valve Component Testing and Quality Certification involves performing final inspections and quality certifications for prime contractors delivering DLA supply contracts. The scope of work requires conducting dimensional verification against Drawing NR 53711 6397408 Revision C utilizing CMM and calibrated gauges. The selected provider must execute zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331 to certify compliance with DLA Master List requirements and deliver all necessary inspection reports and quality certification documents. The project is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance taking place in New Cumberland, Pennsylvania. The opportunity is categorized under NAICS code 541380. Interested parties must respond by the deadline of November 16, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 5 hours ago

DEADLINE

First Article Testing and ValidationThis subcontract involves performing Factory Acceptance Testing for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The primary objective is to conduct testing on the first production unit of NSN 4720016501242 to verify that the item meets specific dimensional, performance, and white color requirements. The selected provider will utilize quality control equipment to document and report all findings for government approval. Final deliverables for this effort include a comprehensive FAT Report and a validated first-article sample. The work is associated with NAICS code 541380 and is to be performed in New Cumberland.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 5 hours ago

DEADLINE

First Article Testing and Validation ServicesThis subcontract for First Article Testing and Validation Services supports the Department of Defense DLA Weapons Support ASC Supplier Oper OEM Division. The selected contractor will perform first article testing on a prototype unit to ensure validation against Design 25-74076-3. This process involves utilizing load testing, tensile strength testers, or non-destructive inspection tools, with the final deliverable being a comprehensive test report due within 30 calendar days of the contract date. Performance will take place in Tracy, California, under NAICS code 541380. To qualify, contractors must adhere to SAE AS9003 or ISO 9001 quality standards and maintain ITAR/EAR authorization for the secure handling of technical data. The response deadline for this opportunity is November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

Non-Destructive Testing (NDT) and Quality InspectionThis subcontract for Non-Destructive Testing (NDT) and Quality Inspection supports prime contractors on DLA Weapons Support Land Supply Chain projects. The scope of work involves performing specialized inspections and testing in accordance with QAP 16236 and SQAP009382983, specifically focusing on casting integrity checks and dimensional verification against TDP Rev B Gen 3. The selected provider is responsible for delivering certified inspection reports and comprehensive quality assurance documentation. Performance will take place at Hill AFB, and the contractor must hold ISO 17025 or an equivalent laboratory certification. Additionally, JCP Certification is required to ensure authorized access to necessary technical data. This opportunity falls under NAICS code 541380, with a response deadline set for November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

Aerospace Quality Assurance & CertificationThe Aerospace Quality Assurance and Certification subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves performing final inspections and airworthiness testing for prime contractors. The selected provider must verify supply chain traceability according to DLAD Procurement Note C03, validate bare item marking per RQ046, and execute certification of compliance with CDRL-FAACERTCOM-25015. The primary deliverable for this engagement is the provision of official FAA Airworthiness Approval documentation. To qualify for this role, the contractor must provide an FAA-certified inspector or a Designated Engineering Representative. The work is designated under NAICS code 541380 and will be performed in New Cumberland. Interested parties must respond by November 13, 2026, to meet the requirements of this specialized quality assurance project.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Electrical Cable Testing and Certification LaboratoryThis subcontract for the Electrical Cable Testing and Certification Laboratory supports the DLA Weapons Support Maritime Supply Chain by performing First Article Testing for prime contractors. The selected provider will utilize certified electrical testing laboratory equipment to conduct technical evaluations on sample units, ensuring strict compliance with MIL-DTL-55021 and NEMA WC 55021 standards. The scope of work includes documenting all test results and providing formal certification of compliance. The contractor is required to deliver the final First Article Test report and the certified test unit within 150 days. Performance for this effort is located in New Cumberland, Pennsylvania, under NAICS code 541380.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

Aerospace NDT Inspection and CertificationThis subcontract for Aerospace NDT Inspection and Certification involves providing non-destructive testing and inspection services for prime contractors working on Defense Logistics Agency aircraft component contracts. The selected provider will execute testing on critical application items in strict accordance with the DLA Master List of Technical and Quality Requirements and RQ040, utilizing specialized equipment to certify the material integrity of both production units and First Article Tests. To qualify for this engagement, the contractor must hold NDT Accreditation per RQ040 and is responsible for delivering comprehensive NDT Inspection Reports and Certifications of Compliance. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense. Interested parties must submit their responses by November 13, 2026.

Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

Aerospace Non-Destructive Testing (NDT) & FAT SupportThis subcontract involves providing Aerospace Non-Destructive Testing and First Article Testing support for prime contractors working on DLA Weapons Support ASC aircraft projects. The selected provider will perform NDT and dimensional verification on two initial units to ensure strict compliance with reference drawings, ultimately delivering validated units and certified inspection reports to Robins Air Force Base. To qualify for this engagement, the contractor must hold NDT accreditation and maintain ISO 9001:2015 certification. The project falls under NAICS code 541380 and is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

First Article Testing for Vehicular ShelvesThis subcontract involves performing First Article Testing for vehicular shelves to support the Department of Defense, specifically the DLA Weapons Support Land Supplier Operations. The contractor is responsible for executing test protocols in accordance with Quality Assurance Provision 19200 13048707 and utilizing precision measurement equipment to validate Drawing NR 19200 13048707. The scope of work requires the verification of critical, major, and minor attributes against the Technical Data Package. The project deliverables include a certified First Article Testing report and an approved first article unit. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 541380. The solicitation was posted on November 5, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 5 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Supply of Aerospace-Grade Raw Materials for Structural SupportsThis subcontract involves the procurement and delivery of certified aerospace-grade raw materials, specifically alloys or composites for NSN 1560012090068, to support prime contractors fulfilling DLA supply contracts. The scope of work requires the supplier to provide Mill Test Reports and material certifications to guarantee compliance with aircraft structural standards and domestic origin requirements under the Buy American/Balance of Payments Program. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, the contract is categorized under NAICS code 331210. Performance will take place at Tinker AFB, with a response deadline set for November 13, 2026. The supplier is responsible for the direct delivery of all certified raw materials to the manufacturer.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 5 hours ago

DEADLINE

Manufacturing of Aircraft Structural Support Components (NSN 1560012090068)This subcontract involves the manufacture of eight aircraft structural support components under NSN 1560012090068 for the Department of Defense, specifically the DLA Weapons Support ASC Supplier OE and AF Div. The work requires the use of precision machining and forming equipment to produce components for prime contractors. Performance will take place at Tinker AFB. The contractor must adhere to strict regulatory and quality standards, including domestic origin requirements, DFARS 252.223-7008, and DLA Packaging Requirements RP001. Additionally, the provider must maintain a quality system that complies with either SAE AS9003 or ISO 9001. The response deadline for this opportunity is November 13, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

MIL-SPEC Packaging and MarkingThis subcontract involves providing specialized packaging and marking services for critical aerospace components supporting prime contractors on DLA Weapons Support ASC projects. The scope of work requires the contractor to package housings using MIL-SPEC materials in accordance with ASTM D3951, apply markings and labels per MIL-STD-129, and perform palletization following RP001 DLA Packaging Requirements to ensure all items are shipment-ready. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, the project is categorized under NAICS code 488410. Performance will take place in New Cumberland, Pennsylvania. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026.

Motor Vehicle Towing

POSTED

about 5 hours ago

DEADLINE

Aerospace Coating and Surface TreatmentThis subcontract for Aerospace Coating and Surface Treatment involves providing specialized coating and surface finishing services for actuator housings on DLA Weapons Support ASC projects. The selected contractor will be responsible for applying protective or functional coatings in strict accordance with technical drawings and the DLA Master List of Technical and Quality Requirements. To qualify, providers must possess industrial plating equipment and maintain certification under SAE AS9003 or ISO 9001 quality systems. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier OE and AF Division, with performance taking place in New Cumberland. Interested parties must respond by November 13, 2026, regarding this opportunity categorized under NAICS code 332813. The final deliverable for this engagement is the provision of finished, coated actuator housings.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 5 hours ago

DEADLINE

Precision Machining of Actuator HousingsThis subcontract involves the precision machining of two Actuator Housings, identified by NSN 1680008025650, for prime contractors supporting DLA Weapons Support ASC projects. The work must be performed using CNC machining centers in accordance with specific technical drawings and the DLA Master List of Technical and Quality Requirements for Critical Application Items, with a strict prohibition on the use of additive manufacturing. Eligible providers must hold SAE AS9003 or ISO 9001 certification and maintain CMMC Level 2 compliance. The project falls under NAICS code 332710 and is managed by the Department of Defense. Performance will take place in New Cumberland, Pennsylvania, with a response deadline set for November 13, 2026.

POSTED

about 5 hours ago

DEADLINE

Supply of Electronic Equipment Maintenance KitsThis subcontract involves the supply of four complete electronic equipment maintenance kits, specifically Material 5895017146794, to support prime contractors fulfilling DLA supply contracts. The provider is responsible for ensuring all equipment meets strict government material requirements and technical specifications, while managing all logistics for FOB Origin delivery. The contract is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place in Tracy, California. The supplier must adhere to all DLA inspection and acceptance standards to ensure compliance. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026, falling under NAICS code 423610.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 5 hours ago

DEADLINE

Manufacture and Supply of Fluid Pressure Filters (NSN 1650-00-367-2949)This subcontract involves the manufacture and supply of fluid pressure filters, specifically part number M8815/1-6, for prime contractors supporting DLA Weapons Support ASC projects. The contractor is responsible for ensuring all products meet MIL-F-8815/1A and QPL-8815-36 specifications. Quality assurance must be maintained through sampling and testing conducted according to MIL-STD-1916 or ASQ H1331, while packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129. The agreement requires the provider to hold ISO 9001:2015 certification and maintain strict compliance with the Buy American Act. The scope of work culminates in the delivery of two completed filters on an FOB Origin basis. Performance of the contract is centered in New Cumberland, Pennsylvania, under the oversight of the Department of Defense.

Iron and Steel Forging

POSTED

about 5 hours ago

DEADLINE

Supply of Hydraulic Hoist Valves (P/N BL-4038-3)This subcontract involves the procurement of three Hydraulic Hoist Valves, part number BL-4038-3 and NSN 1680-00-944-5741, to support prime contractors delivering for the Department of Defense. The selected supplier must ensure all units adhere to zero non-conformance standards and follow strict packaging and labeling guidelines according to ASTM D3951 and MIL-STD-129. Final delivery of the completed units is required at DLA Distribution San Diego. Compliance requirements for this contract include a CMMC Level 2 self-assessment and adherence to DFARS 252.225-7001. The opportunity is managed under NAICS code 332911 for the DLA Weapons Support ASC Supplier Oper AE and AF Div. Interested parties must submit their responses by November 13, 2026.

Industrial Valve Manufacturing

POSTED

about 5 hours ago

DEADLINE

Aerospace Component Packaging and Shipping

All Other Miscellaneous Manufacturing

POSTED

about 5 hours ago

DEADLINE

Aerospace Component Finishing and Coating

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 5 hours ago

DEADLINE

Molded Tank Attachment Flange Fabrication

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

First Article Test (FAT) Support & Certification

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 5 hours ago

DEADLINE

Inspection and Testing of F108 Fan Disks/Hubs

Ok DLA Aviation At Oklahoma City

POSTED

about 10 hours ago

DEADLINE

Quality Assurance and Material Testing

Pa DLA Aviation At Philadelphia

POSTED

about 10 hours ago

DEADLINE

Flight Critical Quality Inspection and Reporting

Pa DLA Aviation At Philadelphia

POSTED

about 10 hours ago

DEADLINE

in about 22 hours

Ultrasonic Testing (UT) for Land Cranes (LC42 & LC43) rails at Dry Dock 6, Yokosuka Japan

Solicitation # N4008427P0809

Navfacsyscom Far East

POSTED

about 10 hours ago

DEADLINE

H999--Biological Sampling and Analysis Pharmacy Clean Room | start 1 Jan 2027

Solicitation # 36C26127Q0034

261-NETWORK Contract Office 21 (36C261)

POSTED

about 10 hours ago

DEADLINE

Production Lot Testing and Quality Validation

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Aerospace Quality Assurance and Sampling Inspection

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

First Article Testing (FAT) and Product Verification Testing (PVT)

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

First Article Testing (FAT) and Dimensional Validation

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

First Article Testing (FAT) Execution and Validation

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

First Article Testing (FAT) Production and Coordination

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS