Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

First Article Testing and Validation Services

Open

Federal

Response Deadline11/13/2026, 09:00:00 AM PST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for First Article Testing and Validation Services supports the Department of Defense DLA Weapons Support ASC Supplier Oper OEM Division. The selected contractor will perform first article testing on a prototype unit to ensure validation against Design 25-74076-3. This process involves utilizing load testing, tensile strength testers, or non-destructive inspection tools, with the final deliverable being a comprehensive test report due within 30 calendar days of the contract date. Performance will take place in Tracy, California, under NAICS code 541380. To qualify, contractors must adhere to SAE AS9003 or ISO 9001 quality standards and maintain ITAR/EAR authorization for the secure handling of technical data. The response deadline for this opportunity is November 13, 2026.

General Info

First article testing for DoD prototype Design 25-74076-3 in Tracy, California.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

NAICS

541380 - Testing Laboratories and Services

Place of Performance

TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A5-27-T-2402.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

WIRE ROPE ASSEMBLY, SIN

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 5

subcontract

Response DeadlineNov 13

Submission deadline

Response Deadline

11/13/2026, 09:00:00 AM PSTin 8 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs first article testing (FAT) for prime contractors on DLA Weapons Support ASC projects. Validates one prototype unit against Design 25-74076-3 using load testing, tensile strength testers, or NDI tools. Requires SAE AS9003 or ISO 9001 quality standards and ITAR/EAR authorization for technical data handling. Delivers a comprehensive test report within 30 calendar days of contract date.

Similar Contracts

Same NAICS industry code

RFQ#9783 Respirable Crystalline Silica Exposure Assessment

Solicitation # RFQ#9783

Management & Training Corporation (MTC) is soliciting bids under RFQ#9783 for a subcontracting opportunity to conduct a Respirable Crystalline Silica Exposure Assessment at the Edison Job Corps Center in Edison, New Jersey. The project requires a qualified industrial hygiene consultant to evaluate the Brick Trade training program, specifically focusing on 27 potentially exposed students and instructors involved in activities such as fire clay mixing and brick cutting. The scope of work includes performing site assessments, implementing a personal breathing-zone air sampling plan, and comparing results against OSHA permissible exposure limits and action levels. Deliverables consist of a written report, laboratory results, exposure calculations, and a prioritized corrective action plan for reducing exposures. This is a fee-for-service contract awarded on a best-value basis. Interested offerors must submit a lump sum bid, a completed supplier packet including Form W-9 and self-certification, proof of insurance, and three professional references by November 6, 2026. The solicitation is open to various small business set-asides, including VOSB, SDVOSB, WOSB, and HUBZone. Awardees must comply with Service Contract Labor Standards for Middlesex County, New Jersey, and adhere to strict federal guidelines regarding the protection of sensitive information and the Buy American Act. First-tier subcontractors with contracts exceeding 45,000 dollars must also provide disclosures regarding government debarment or suspension.

Edison Job Corps

POSTED

about 4 hours ago

DEADLINE

in about 23 hours

Dimensional Inspection and Certification Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Valve Component Testing and Quality CertificationThis subcontract for Valve Component Testing and Quality Certification involves performing final inspections and quality certifications for prime contractors delivering DLA supply contracts. The scope of work requires conducting dimensional verification against Drawing NR 53711 6397408 Revision C utilizing CMM and calibrated gauges. The selected provider must execute zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331 to certify compliance with DLA Master List requirements and deliver all necessary inspection reports and quality certification documents. The project is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance taking place in New Cumberland, Pennsylvania. The opportunity is categorized under NAICS code 541380. Interested parties must respond by the deadline of November 16, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 4 hours ago

DEADLINE

First Article Testing and ValidationThis subcontract involves performing Factory Acceptance Testing for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The primary objective is to conduct testing on the first production unit of NSN 4720016501242 to verify that the item meets specific dimensional, performance, and white color requirements. The selected provider will utilize quality control equipment to document and report all findings for government approval. Final deliverables for this effort include a comprehensive FAT Report and a validated first-article sample. The work is associated with NAICS code 541380 and is to be performed in New Cumberland.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

Non-Destructive Testing (NDT) and Quality InspectionThis subcontract for Non-Destructive Testing (NDT) and Quality Inspection supports prime contractors on DLA Weapons Support Land Supply Chain projects. The scope of work involves performing specialized inspections and testing in accordance with QAP 16236 and SQAP009382983, specifically focusing on casting integrity checks and dimensional verification against TDP Rev B Gen 3. The selected provider is responsible for delivering certified inspection reports and comprehensive quality assurance documentation. Performance will take place at Hill AFB, and the contractor must hold ISO 17025 or an equivalent laboratory certification. Additionally, JCP Certification is required to ensure authorized access to necessary technical data. This opportunity falls under NAICS code 541380, with a response deadline set for November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

Aerospace Quality Assurance & CertificationThe Aerospace Quality Assurance and Certification subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves performing final inspections and airworthiness testing for prime contractors. The selected provider must verify supply chain traceability according to DLAD Procurement Note C03, validate bare item marking per RQ046, and execute certification of compliance with CDRL-FAACERTCOM-25015. The primary deliverable for this engagement is the provision of official FAA Airworthiness Approval documentation. To qualify for this role, the contractor must provide an FAA-certified inspector or a Designated Engineering Representative. The work is designated under NAICS code 541380 and will be performed in New Cumberland. Interested parties must respond by November 13, 2026, to meet the requirements of this specialized quality assurance project.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Electrical Cable Testing and Certification Laboratory

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

Aerospace NDT Inspection and Certification

Defense Logistics Agency

POSTED

about 4 hours ago

DEADLINE

Aerospace Non-Destructive Testing (NDT) & FAT SupportThis subcontract involves providing Aerospace Non-Destructive Testing and First Article Testing support for prime contractors working on DLA Weapons Support ASC aircraft projects. The selected provider will perform NDT and dimensional verification on two initial units to ensure strict compliance with reference drawings, ultimately delivering validated units and certified inspection reports to Robins Air Force Base. To qualify for this engagement, the contractor must hold NDT accreditation and maintain ISO 9001:2015 certification. The project falls under NAICS code 541380 and is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

First Article Testing for Vehicular ShelvesThis subcontract involves performing First Article Testing for vehicular shelves to support the Department of Defense, specifically the DLA Weapons Support Land Supplier Operations. The contractor is responsible for executing test protocols in accordance with Quality Assurance Provision 19200 13048707 and utilizing precision measurement equipment to validate Drawing NR 19200 13048707. The scope of work requires the verification of critical, major, and minor attributes against the Technical Data Package. The project deliverables include a certified First Article Testing report and an approved first article unit. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 541380. The solicitation was posted on November 5, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 4 hours ago

DEADLINE

Third-Party Quality Inspection for Critical FastenersThis subcontract for Third-Party Quality Inspection for Critical Fasteners supports the Department of Defense through the DLA Weapons Support ASC Commodities Division. The selected provider will perform independent quality sampling and inspection for prime contractors, ensuring zero non-conformances against the DLA Master List of Technical and Quality Requirements. Work is performed in Cherry Point and requires the use of calibrated precision measurement tools, such as micrometers and optical comparators, to execute sampling plans according to MIL-STD-1916 or ASQ H1331 standards. Qualified personnel must be Certified Quality Inspectors to deliver the necessary inspection reports and certifications of conformance. The opportunity is categorized under NAICS code 541380, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

NDT Inspection and Quality Validation

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 4 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

MIL-SPEC Packaging and Marking ProviderThis subcontract involves providing specialized military-grade packaging and marking services for prime contractors supporting the DLA Weapons Support ASC Supplier Oper OEM Division. The scope of work focuses on the preparation of four units containing delicate scientific instruments, requiring strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Specific requirements include the application of Special Marking Code 05 and the use of approved MIL-SPEC materials and specialized labeling equipment. The completed units are to be delivered to DLA Distribution San Joaquin, with the place of performance located in Tracy, California. This opportunity is categorized under NAICS code 488410 and was posted on November 5, 2026, with a response deadline of November 13, 2026.

Motor Vehicle Towing

POSTED

about 4 hours ago

DEADLINE

Indicating Capillary Tube Thermometer SupplierThis subcontract involves the manufacture or sourcing of four specialized indicating capillary tube thermometers, identified by NSN 6685-01-366-0751, for prime contractors working on DLA Weapons Support ASC projects. The supplier must ensure all units comply with the DLA Master List of Technical and Quality Requirements (RA001) and adhere to the Buy American Act and Berry Amendment. Quality assurance must be maintained through MIL-STD-1916 or ASQ H1331 zero-based sampling plans. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, the contract falls under NAICS code 334517. Performance for this requirement is located in Tracy, California. Interested parties must respond by November 13, 2026.

Irradiation Apparatus Manufacturing

POSTED

about 4 hours ago

DEADLINE

Military-Grade Packaging and Shipping ServicesThis subcontract for Military-Grade Packaging and Shipping Services involves providing specialized logistics support for prime contractors fulfilling DLA supply contracts. The scope of work requires the packaging of two units according to ASTM D3951 standards, marking per MIL-STD-129, and palletization in compliance with RP001 requirements. The contractor is responsible for coordinating FOB Origin shipping to DLA Distribution San Joaquin. The project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper OEM Division, with performance taking place in Tracy, California. Interested parties should note the response deadline of November 13, 2026, and the classification of the work under NAICS code 488410.

Motor Vehicle Towing

POSTED

about 4 hours ago

DEADLINE

Manufacturing of Electrical Equipment Mounting BasesThis subcontract involves the manufacturing of two electrical equipment mounting bases for the Department of Defense, specifically supporting the DLA Weapons Support ASC Supplier Oper OEM Division. The contractor is responsible for fabricating components according to NSN 5975014546978 specifications, while ensuring strict adherence to RA001 technical requirements and RQ017 marking standards. Quality assurance must be conducted through sampling in accordance with MIL-STD-1916 or ASQ H1331. The project requires the contractor to maintain high security and regulatory standards, including a CMMC Level 2 self-assessment and full compliance with DFARS 252.204-7012. Performance of the contract will take place in Tracy, California, under NAICS code 332312. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026.

Fabricated Structural Metal Manufacturing

POSTED

about 4 hours ago

DEADLINE

Stabilizer Parts Kit SupplyThis subcontract involves the supply of three complete stabilizer parts kits for prime contractors under DLA supply contracts. The scope of work includes sourcing or manufacturing individual components for stabilizer assembly repair, kitting these items into cushioned boxes with detailed contents lists, and ensuring all shipments are packaged according to MIL-STD-2073-1E and MIL-STD-129 standards. Performance for this contract will take place at Tinker AFB. To be eligible, the provider must maintain ISO 9001:2015 or SAE AS9003 compliance and strictly adhere to the Buy American Act and the Berry Amendment. The contract is managed by the Department of Defense through the DLA Weapons Support ASC Supplier Order OEM Division under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

Military-Grade Packaging and Shipping ServicesThis subcontract for Military-Grade Packaging and Shipping Services involves providing specialized packaging, marking, and palletization for prime contractors fulfilling DLA supply contracts. The scope of work requires strict adherence to MIL-STD-2073-1E and MIL-STD-129 for hardware marking and packaging, as well as compliance with DLA requirement RP001 for palletization. All shipments must utilize military-specification materials and be delivered FOB Origin to the DLA Distribution Depot Hill. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, the performance of these services will take place at Hill AFB. The opportunity was posted on November 5, 2026, with a response deadline of November 13, 2026. The contract falls under NAICS code 488510 and focuses on delivering shipments that are fully prepared and ready for immediate transport.

Freight Transportation Arrangement

POSTED

about 4 hours ago

DEADLINE

Manufacturing of Spacer Rings (NSN 5365000257188)This subcontract involves the manufacture and supply of 11 precision spacer rings under NSN 5365000257188 for the Department of Defense DLA Weapons Support ASC Supplier OEM Division. The contractor is responsible for fabricating the rings to strict material and dimensional tolerances, with a specific requirement that all materials remain free of hexavalent chromium. Quality assurance must be conducted via sampling according to MIL-STD-1916 or ASQ H1331 standards, and the use of additive manufacturing is strictly prohibited. To be eligible, the provider must maintain ISO 9001:2015 certification and have completed a CMMC Level 2 self-assessment. The work is associated with NAICS code 332510 and will be performed at Hill AFB. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026.

Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

Supply of Wire Strand / Wire Rope (NSN 4010010981675)

Other Fabricated Wire Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

Supply of Spacer Plates (NSN 5365007283511)

Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

Supply of Aneroid Manometers (NSN 6685017416693)This subcontract involves the procurement or manufacture of 11 aneroid manometers under NSN 6685017416693 to support prime contractors on DLA Weapons Support ASC projects. The selected provider is responsible for ensuring all units undergo physical identification and bare item marking in accordance with requirement RQ017, as well as adhering to DLA Packaging Requirements for Procurement RP001. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, the contract falls under NAICS code 334513. Performance for this requirement is centered in Tracy, California, with a response deadline set for November 13, 2026.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 4 hours ago

DEADLINE

Supplier of Valve and Pin Pilot (NSN 2915-00-981-1828)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, requires the manufacture or sourcing of two Valve and Pin Pilot assemblies identified by NSN 2915-00-981-1828. The selected supplier will provide these components to prime contractors, ensuring all hardware meets strict marking and labeling standards, specifically bare item marking per RQ017 and compliance with the latest revision of MIL-STD 129. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332911, with the place of performance located at Tinker AFB. Interested parties must respond by November 13, 2026, to fulfill the delivery requirements for these critical weapon support components.

Industrial Valve Manufacturing

POSTED

about 4 hours ago

DEADLINE

Manufacturing of Flat Brackets (NSN 5342-01-029-5268)This subcontract involves the fabrication and supply of precision flat brackets, specifically Part Number 3024491, for prime contractors supporting the DLA Weapons Support ASC. The manufacturing process requires the use of CNC milling, punching, or stamping, with strict adherence to RQ017 for bare item marking and MIL-STD-105/ASQ Z1.4 for quality inspection. The final deliverable consists of two finished and packaged brackets to be delivered to DLA Distribution Cherry Point, North Carolina. To be eligible, the provider must maintain CMMC Level 2 certification and ensure full compliance with the Buy American Act. This opportunity falls under NAICS code 332312 and is managed by the Department of Defense. Interested parties must respond by November 13, 2026.

Fabricated Structural Metal Manufacturing

POSTED

about 4 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

First Article Test (FAT) Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Quality Assurance and Testing for Source-Controlled Fasteners

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Third-Party Quality Assurance and Inspection for Aircraft Floor Component

Defense Logistics Agency

POSTED

about 4 hours ago

DEADLINE

Third-Party Inspection and Certification

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

First Article Testing and Validation Services

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 4 hours ago

DEADLINE

Critical Application Quality Inspection

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

First Article Testing and Quality Conformance

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 4 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS