Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Third-Party Quality Inspection for Critical Fasteners

Open

Federal

Response Deadline11/13/2026, 12:00:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Third-Party Quality Inspection for Critical Fasteners supports the Department of Defense through the DLA Weapons Support ASC Commodities Division. The selected provider will perform independent quality sampling and inspection for prime contractors, ensuring zero non-conformances against the DLA Master List of Technical and Quality Requirements. Work is performed in Cherry Point and requires the use of calibrated precision measurement tools, such as micrometers and optical comparators, to execute sampling plans according to MIL-STD-1916 or ASQ H1331 standards. Qualified personnel must be Certified Quality Inspectors to deliver the necessary inspection reports and certifications of conformance. The opportunity is categorized under NAICS code 541380, with a response deadline of November 13, 2026.

General Info

Third-party quality inspection for DoD critical fasteners in Cherry Point by November 13, 2026.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

541380 - Testing Laboratories and Services

Place of Performance

CHERRY POINT, NC, 28533-5040, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-8885.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PIN-RIVET

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 5

subcontract

Response DeadlineNov 13

Submission deadline

Response Deadline

11/13/2026, 12:00:00 PM ESTin 8 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs independent quality sampling and inspection for prime contractors on DLA Weapons Support ASC projects. Executes sampling plans per MIL-STD-1916 or ASQ H1331 to verify zero non-conformances against the DLA Master List of Technical and Quality Requirements. Uses calibrated precision measurement tools including optical comparators and micrometers. Requires Certified Quality Inspectors (CQT). Delivers inspection reports and certifications of conformance.

Similar Contracts

Same NAICS industry code

RFQ#9783 Respirable Crystalline Silica Exposure Assessment

Solicitation # RFQ#9783

Management & Training Corporation (MTC) is soliciting bids under RFQ#9783 for a subcontracting opportunity to conduct a Respirable Crystalline Silica Exposure Assessment at the Edison Job Corps Center in Edison, New Jersey. The project requires a qualified industrial hygiene consultant to evaluate the Brick Trade training program, specifically focusing on 27 potentially exposed students and instructors involved in activities such as fire clay mixing and brick cutting. The scope of work includes performing site assessments, implementing a personal breathing-zone air sampling plan, and comparing results against OSHA permissible exposure limits and action levels. Deliverables consist of a written report, laboratory results, exposure calculations, and a prioritized corrective action plan for reducing exposures. This is a fee-for-service contract awarded on a best-value basis. Interested offerors must submit a lump sum bid, a completed supplier packet including Form W-9 and self-certification, proof of insurance, and three professional references by November 6, 2026. The solicitation is open to various small business set-asides, including VOSB, SDVOSB, WOSB, and HUBZone. Awardees must comply with Service Contract Labor Standards for Middlesex County, New Jersey, and adhere to strict federal guidelines regarding the protection of sensitive information and the Buy American Act. First-tier subcontractors with contracts exceeding 45,000 dollars must also provide disclosures regarding government debarment or suspension.

Edison Job Corps

POSTED

about 4 hours ago

DEADLINE

in about 23 hours

Dimensional Inspection and Certification Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Valve Component Testing and Quality CertificationThis subcontract for Valve Component Testing and Quality Certification involves performing final inspections and quality certifications for prime contractors delivering DLA supply contracts. The scope of work requires conducting dimensional verification against Drawing NR 53711 6397408 Revision C utilizing CMM and calibrated gauges. The selected provider must execute zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331 to certify compliance with DLA Master List requirements and deliver all necessary inspection reports and quality certification documents. The project is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance taking place in New Cumberland, Pennsylvania. The opportunity is categorized under NAICS code 541380. Interested parties must respond by the deadline of November 16, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 4 hours ago

DEADLINE

First Article Testing and ValidationThis subcontract involves performing Factory Acceptance Testing for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The primary objective is to conduct testing on the first production unit of NSN 4720016501242 to verify that the item meets specific dimensional, performance, and white color requirements. The selected provider will utilize quality control equipment to document and report all findings for government approval. Final deliverables for this effort include a comprehensive FAT Report and a validated first-article sample. The work is associated with NAICS code 541380 and is to be performed in New Cumberland.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

First Article Testing and Validation ServicesThis subcontract for First Article Testing and Validation Services supports the Department of Defense DLA Weapons Support ASC Supplier Oper OEM Division. The selected contractor will perform first article testing on a prototype unit to ensure validation against Design 25-74076-3. This process involves utilizing load testing, tensile strength testers, or non-destructive inspection tools, with the final deliverable being a comprehensive test report due within 30 calendar days of the contract date. Performance will take place in Tracy, California, under NAICS code 541380. To qualify, contractors must adhere to SAE AS9003 or ISO 9001 quality standards and maintain ITAR/EAR authorization for the secure handling of technical data. The response deadline for this opportunity is November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

Non-Destructive Testing (NDT) and Quality InspectionThis subcontract for Non-Destructive Testing (NDT) and Quality Inspection supports prime contractors on DLA Weapons Support Land Supply Chain projects. The scope of work involves performing specialized inspections and testing in accordance with QAP 16236 and SQAP009382983, specifically focusing on casting integrity checks and dimensional verification against TDP Rev B Gen 3. The selected provider is responsible for delivering certified inspection reports and comprehensive quality assurance documentation. Performance will take place at Hill AFB, and the contractor must hold ISO 17025 or an equivalent laboratory certification. Additionally, JCP Certification is required to ensure authorized access to necessary technical data. This opportunity falls under NAICS code 541380, with a response deadline set for November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

Aerospace Quality Assurance & CertificationThe Aerospace Quality Assurance and Certification subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves performing final inspections and airworthiness testing for prime contractors. The selected provider must verify supply chain traceability according to DLAD Procurement Note C03, validate bare item marking per RQ046, and execute certification of compliance with CDRL-FAACERTCOM-25015. The primary deliverable for this engagement is the provision of official FAA Airworthiness Approval documentation. To qualify for this role, the contractor must provide an FAA-certified inspector or a Designated Engineering Representative. The work is designated under NAICS code 541380 and will be performed in New Cumberland. Interested parties must respond by November 13, 2026, to meet the requirements of this specialized quality assurance project.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Electrical Cable Testing and Certification Laboratory

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

Aerospace NDT Inspection and Certification

Defense Logistics Agency

POSTED

about 4 hours ago

DEADLINE

Aerospace Non-Destructive Testing (NDT) & FAT SupportThis subcontract involves providing Aerospace Non-Destructive Testing and First Article Testing support for prime contractors working on DLA Weapons Support ASC aircraft projects. The selected provider will perform NDT and dimensional verification on two initial units to ensure strict compliance with reference drawings, ultimately delivering validated units and certified inspection reports to Robins Air Force Base. To qualify for this engagement, the contractor must hold NDT accreditation and maintain ISO 9001:2015 certification. The project falls under NAICS code 541380 and is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

First Article Testing for Vehicular ShelvesThis subcontract involves performing First Article Testing for vehicular shelves to support the Department of Defense, specifically the DLA Weapons Support Land Supplier Operations. The contractor is responsible for executing test protocols in accordance with Quality Assurance Provision 19200 13048707 and utilizing precision measurement equipment to validate Drawing NR 19200 13048707. The scope of work requires the verification of critical, major, and minor attributes against the Technical Data Package. The project deliverables include a certified First Article Testing report and an approved first article unit. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 541380. The solicitation was posted on November 5, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 4 hours ago

DEADLINE

NDT Inspection and Quality Validation

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 4 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

Supply of Hexagon Head Cap ScrewsThis subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves the supply of 250 Hexagon Head Cap Screws identified by NSN 5305015885151. The contract is designated under NAICS code 332722 and requires the supplier to provide industrial fasteners to prime contractors. Performance for this contract will take place in New Cumberland, Pennsylvania. The agreement mandates strict adherence to the Berry Amendment and the Buy American Act to ensure all materials meet domestic origin requirements. Shipping will be handled according to FOB Origin and First Destination Transportation terms. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

Supplier of Blind Rivets (NSN 5320-00-718-0835)

Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract involves providing military-grade packaging and marking services for the Department of Defense under the DLA Weapons Support ASC Commodities Division. The scope of work requires the contractor to perform bare item markings according to RQ017, execute packaging and preservation in compliance with MIL-STD-2073-1E Method 33, and apply shipping labels per MIL-STD-129. These rigorous standards are necessary to ensure a 36-month shelf life for the materials. The specific deliverable consists of 21 individually marked and packaged grommets to be shipped to DLA Distribution Cherry Point. The project falls under NAICS code 488510, with a response deadline set for November 13, 2026.

Freight Transportation Arrangement

POSTED

about 4 hours ago

DEADLINE

Nonmetallic Grommet Manufacturer (Fuel Vent Line)This subcontract involves the manufacture of 21 nonmetallic grommets for fuel vent lines to support prime contractors on DLA Weapons Support ASC projects. The components must be fabricated according to basic drawing 78286 65307-03016 and NSN 5325-00-060-5294 using either precision molding or machining processes. Performance will take place in Cherry Point, and the final delivery must consist of 21 finished and inspected units. To qualify, the manufacturer must maintain a quality management system that complies with SAE AS9003 or ISO 9001 standards and strictly adhere to the Buy American program. The opportunity was posted on November 5, 2026, with a response deadline of November 13, 2026. This requirement falls under NAICS code 326199 and is managed by the Department of Defense.

All Other Plastics Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

Solid Rivet Supplier (NSN 5320-00-584-9078)This subcontract involves the manufacture and supply of 203 lbs of precision solid rivets for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The rivets must be produced according to NSN 5320-00-584-9078 specifications, with strict adherence to MIL-STD-130N for identification marking and MIL-STD-2073-1E for packaging. Final delivery is required at the DLA Distribution DDSP facility in New Cumberland, Pennsylvania. To be eligible, the supplier must maintain either SAE AS9003 or ISO 9001 quality certification and demonstrate cybersecurity compliance with NIST SP 800-171. The opportunity was posted on November 5, 2026, with a response deadline of November 13, 2026, falling under NAICS code 332510.

Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

Supply of Thrust Washer Bearings (NSN 3120014840849)

Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on DLA Weapons Support ASC aviation projects. The scope of work involves performing military packaging and marking of components in strict accordance with MIL-STD-2073-1E and MIL-STD-129. To protect sensitive electronics, the provider must utilize approved MIL-SPEC cushioning and dunnage materials while ensuring all hazardous materials comply with DFARS 252.223-7001 regulations. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division. All completed, shipping-ready units are to be delivered to DLA Distribution San Diego. The contract falls under NAICS code 488410, with a response deadline set for November 13, 2026.

Motor Vehicle Towing

POSTED

about 4 hours ago

DEADLINE

Manufacturing of Dimming Type Indicator Light Assembly (NSN 6220-01-423-1476)This subcontract involves the manufacturing of two Dimming Type Indicator Light Assemblies (NSN 6220-01-423-1476) for the DLA Weapons Support ASC Commodities Division. The project requires precision electronics assembly based on technical drawings and Limited Rights Data. All deliverables must be fully tested, marked, and inspected to ensure compliance with strict quality standards. The contractor must maintain JCP certification and hold ITAR/EAR authorization to perform the work. Adherence to ISO 9001:2015 and NAVAIR ALRE traceability is mandatory. Performance will take place in San Diego, with a response deadline set for November 13, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

Supply of PIN-RIVET (BACB30MC6-11)This subcontract involves the supply of 231 certified PIN-RIVET units, specifically part number BACB30MC6-11, for the Defense Logistics Agency Weapons Support ASC Commodities Division. The items must be manufactured or sourced according to Basic Drawing NR 81205 BACB30MC Revision AK and meet the strict tolerances associated with NSN 5320001213013, necessitating the use of precision manufacturing equipment. The contract requires that all items be packaged in accordance with ASTM D3951 standards. Performance for this requirement is centered at Hill AFB, and the procurement falls under NAICS code 332510. Interested parties must have responded by the deadline of November 13, 2026.

Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

Sleeve Bushing Supply (NSN 3120-01-089-0691)This subcontract involves the supply of sleeve bushings for prime contractors under the DLA Weapons Support ASC Commodities Division. The contractor is responsible for manufacturing or sourcing hardware that meets the specific technical requirements for NSN 3120-01-089-0691 using precision machining equipment. The final delivery consists of two physical sleeve bushings that must adhere to RP001 packaging standards. Compliance requirements include providing necessary documentation for the Source Approval Request per RC001. The contract falls under NAICS code 332721 and was posted on November 5, 2026, with a response deadline of November 13, 2026.

Precision Turned Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

Special Purpose Electrical Cable Assembly Supplier

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

Precision Manufacturer - Flat Washers (NSN 5310-01-592-9749)This subcontract involves the manufacture and supply of 12 high-precision flat washers for the DLA Weapons Support ASC Commodities Division. The items must be produced according to Basic Drawing NR 43689 709-5486674 Revision M, with strict prohibitions against the use of mercury or additive manufacturing. All materials and processes must comply with the Buy American Act and the Berry Amendment, and the final products must be packaged in accordance with MIL-STD-2073-1E and MIL-STD-129. Qualified providers must possess precision machining equipment and hold JCP certification along with either SAE AS9003 or ISO 9001 certification. The performance location for this contract is Tracy, California. Interested parties must submit their responses by November 13, 2026, for this Department of Defense requirement under NAICS code 332722.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

First Article Test (FAT) Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Quality Assurance and Testing for Source-Controlled Fasteners

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Third-Party Quality Assurance and Inspection for Aircraft Floor Component

Defense Logistics Agency

POSTED

about 4 hours ago

DEADLINE

Third-Party Inspection and Certification

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

First Article Testing and Validation Services

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 4 hours ago

DEADLINE

Critical Application Quality Inspection

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

First Article Testing and Quality Conformance

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 4 hours ago

DEADLINE

Aerospace Quality Assurance and Dimensional Inspection

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

Inspection and Testing of F108 Fan Disks/Hubs

Ok DLA Aviation At Oklahoma City

POSTED

about 9 hours ago

DEADLINE

Quality Assurance and Material Testing

Pa DLA Aviation At Philadelphia

POSTED

about 9 hours ago

DEADLINE

Flight Critical Quality Inspection and Reporting

Pa DLA Aviation At Philadelphia

POSTED

about 9 hours ago

DEADLINE

in about 23 hours

Ultrasonic Testing (UT) for Land Cranes (LC42 & LC43) rails at Dry Dock 6, Yokosuka Japan

Solicitation # N4008427P0809

Navfacsyscom Far East

POSTED

about 9 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS