Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

NDT Inspection and Quality Validation

Open

Federal

Response Deadline11/16/2026, 09:00:00 AM PST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for NDT Inspection and Quality Validation supports the Department of Defense through the DLA Weapons Support Land Supplier Operations Vehicle Support agency. The selected provider will perform non-destructive testing and quality inspections for prime contractors, specifically executing protocols outlined in drawings 81755 NDTS-1500 and 81755 NDTS-1101, as well as Quality Assurance Plan 16236 SQAP012316356. The primary deliverables for this engagement include detailed inspection reports and certifications of conformance. To be eligible, the contractor must maintain DDTC registration and employ technicians who are NAS 410 certified. The work is designated under NAICS code 541380 and will be performed in Tracy, California. Interested parties must submit their responses by November 16, 2026.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

NAICS

541380 - Testing Laboratories and Services

Place of Performance

TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L3-27-T-1905.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

FAIRING, BOMB RACK

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 5

subcontract

Response DeadlineNov 16

Submission deadline

Response Deadline

11/16/2026, 09:00:00 AM PSTin 11 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs non-destructive testing (NDT) and quality inspection for prime contractors on DLA Weapons Support Land Supplier Operations Vehicle Support projects. Executes inspection protocols per drawings 81755 NDTS-1500 and 81755 NDTS-1101 and Quality Assurance Plan 16236 SQAP012316356. Requires DDTC registration and NAS 410 certified technicians. Delivers inspection reports and certifications of conformance.

Similar Contracts

Same NAICS industry code

RFQ#9783 Respirable Crystalline Silica Exposure Assessment

Solicitation # RFQ#9783

Management & Training Corporation (MTC) is soliciting bids under RFQ#9783 for a subcontracting opportunity to conduct a Respirable Crystalline Silica Exposure Assessment at the Edison Job Corps Center in Edison, New Jersey. The project requires a qualified industrial hygiene consultant to evaluate the Brick Trade training program, specifically focusing on 27 potentially exposed students and instructors involved in activities such as fire clay mixing and brick cutting. The scope of work includes performing site assessments, implementing a personal breathing-zone air sampling plan, and comparing results against OSHA permissible exposure limits and action levels. Deliverables consist of a written report, laboratory results, exposure calculations, and a prioritized corrective action plan for reducing exposures. This is a fee-for-service contract awarded on a best-value basis. Interested offerors must submit a lump sum bid, a completed supplier packet including Form W-9 and self-certification, proof of insurance, and three professional references by November 6, 2026. The solicitation is open to various small business set-asides, including VOSB, SDVOSB, WOSB, and HUBZone. Awardees must comply with Service Contract Labor Standards for Middlesex County, New Jersey, and adhere to strict federal guidelines regarding the protection of sensitive information and the Buy American Act. First-tier subcontractors with contracts exceeding 45,000 dollars must also provide disclosures regarding government debarment or suspension.

Edison Job Corps

POSTED

about 5 hours ago

DEADLINE

in about 22 hours

Dimensional Inspection and Certification ServicesThis subcontract for Dimensional Inspection and Certification Services supports prime contractors delivering DLA supply contracts through the Department of Defense. The scope of work involves performing dimensional conformance testing on 3,729 units, specifically inspecting Class 3A and 3B threads according to FED-STD-H28/20 and verifying identification markings per MIL-STD-130N. All work must be performed using precision gauging and thread measurement tools calibrated to federal standards. The service provider is required to maintain a quality management system certified under ISO 9001 or SAE AS9003. Key deliverables include detailed inspection reports and certifications of conformance. Performance will take place at Hill AFB, and the solicitation is categorized under NAICS code 541380.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Critical Application Inspection and Testing

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

Valve Component Testing and Quality CertificationThis subcontract for Valve Component Testing and Quality Certification involves performing final inspections and quality certifications for prime contractors delivering DLA supply contracts. The scope of work requires conducting dimensional verification against Drawing NR 53711 6397408 Revision C utilizing CMM and calibrated gauges. The selected provider must execute zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331 to certify compliance with DLA Master List requirements and deliver all necessary inspection reports and quality certification documents. The project is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance taking place in New Cumberland, Pennsylvania. The opportunity is categorized under NAICS code 541380. Interested parties must respond by the deadline of November 16, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 5 hours ago

DEADLINE

First Article Testing and ValidationThis subcontract involves performing Factory Acceptance Testing for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The primary objective is to conduct testing on the first production unit of NSN 4720016501242 to verify that the item meets specific dimensional, performance, and white color requirements. The selected provider will utilize quality control equipment to document and report all findings for government approval. Final deliverables for this effort include a comprehensive FAT Report and a validated first-article sample. The work is associated with NAICS code 541380 and is to be performed in New Cumberland.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 5 hours ago

DEADLINE

First Article Testing and Validation ServicesThis subcontract for First Article Testing and Validation Services supports the Department of Defense DLA Weapons Support ASC Supplier Oper OEM Division. The selected contractor will perform first article testing on a prototype unit to ensure validation against Design 25-74076-3. This process involves utilizing load testing, tensile strength testers, or non-destructive inspection tools, with the final deliverable being a comprehensive test report due within 30 calendar days of the contract date. Performance will take place in Tracy, California, under NAICS code 541380. To qualify, contractors must adhere to SAE AS9003 or ISO 9001 quality standards and maintain ITAR/EAR authorization for the secure handling of technical data. The response deadline for this opportunity is November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

Non-Destructive Testing (NDT) and Quality InspectionThis subcontract for Non-Destructive Testing (NDT) and Quality Inspection supports prime contractors on DLA Weapons Support Land Supply Chain projects. The scope of work involves performing specialized inspections and testing in accordance with QAP 16236 and SQAP009382983, specifically focusing on casting integrity checks and dimensional verification against TDP Rev B Gen 3. The selected provider is responsible for delivering certified inspection reports and comprehensive quality assurance documentation. Performance will take place at Hill AFB, and the contractor must hold ISO 17025 or an equivalent laboratory certification. Additionally, JCP Certification is required to ensure authorized access to necessary technical data. This opportunity falls under NAICS code 541380, with a response deadline set for November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

Aerospace Quality Assurance & CertificationThe Aerospace Quality Assurance and Certification subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves performing final inspections and airworthiness testing for prime contractors. The selected provider must verify supply chain traceability according to DLAD Procurement Note C03, validate bare item marking per RQ046, and execute certification of compliance with CDRL-FAACERTCOM-25015. The primary deliverable for this engagement is the provision of official FAA Airworthiness Approval documentation. To qualify for this role, the contractor must provide an FAA-certified inspector or a Designated Engineering Representative. The work is designated under NAICS code 541380 and will be performed in New Cumberland. Interested parties must respond by November 13, 2026, to meet the requirements of this specialized quality assurance project.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Electrical Cable Testing and Certification LaboratoryThis subcontract for the Electrical Cable Testing and Certification Laboratory supports the DLA Weapons Support Maritime Supply Chain by performing First Article Testing for prime contractors. The selected provider will utilize certified electrical testing laboratory equipment to conduct technical evaluations on sample units, ensuring strict compliance with MIL-DTL-55021 and NEMA WC 55021 standards. The scope of work includes documenting all test results and providing formal certification of compliance. The contractor is required to deliver the final First Article Test report and the certified test unit within 150 days. Performance for this effort is located in New Cumberland, Pennsylvania, under NAICS code 541380.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

Aerospace NDT Inspection and CertificationThis subcontract for Aerospace NDT Inspection and Certification involves providing non-destructive testing and inspection services for prime contractors working on Defense Logistics Agency aircraft component contracts. The selected provider will execute testing on critical application items in strict accordance with the DLA Master List of Technical and Quality Requirements and RQ040, utilizing specialized equipment to certify the material integrity of both production units and First Article Tests. To qualify for this engagement, the contractor must hold NDT Accreditation per RQ040 and is responsible for delivering comprehensive NDT Inspection Reports and Certifications of Compliance. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense. Interested parties must submit their responses by November 13, 2026.

Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

Aerospace Non-Destructive Testing (NDT) & FAT SupportThis subcontract involves providing Aerospace Non-Destructive Testing and First Article Testing support for prime contractors working on DLA Weapons Support ASC aircraft projects. The selected provider will perform NDT and dimensional verification on two initial units to ensure strict compliance with reference drawings, ultimately delivering validated units and certified inspection reports to Robins Air Force Base. To qualify for this engagement, the contractor must hold NDT accreditation and maintain ISO 9001:2015 certification. The project falls under NAICS code 541380 and is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

First Article Testing for Vehicular ShelvesThis subcontract involves performing First Article Testing for vehicular shelves to support the Department of Defense, specifically the DLA Weapons Support Land Supplier Operations. The contractor is responsible for executing test protocols in accordance with Quality Assurance Provision 19200 13048707 and utilizing precision measurement equipment to validate Drawing NR 19200 13048707. The scope of work requires the verification of critical, major, and minor attributes against the Technical Data Package. The project deliverables include a certified First Article Testing report and an approved first article unit. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 541380. The solicitation was posted on November 5, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 5 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

Supply of Critical Application Gaskets (NSN 5330016626649)This subcontract involves the supply of 268 critical application gaskets for prime contractors supporting DLA supply contracts. The items must be manufactured or sourced to meet TE Connectivity Corporation part number DT8P-L012-GKT specifications. Strict packaging and marking requirements are in place, necessitating the use of waterproof, greaseproof, opaque bags according to MIL-DTL-117, Type II, Class C, Style 1, with marking compliant with MIL-STD-129. The contract is managed under the Department of Defense for the DLA Weapons Support Land Supplier Operations Vehicle Support. Compliance with the Buy American Act and DFARS 252.204-7012 cybersecurity standards is mandatory. Delivery of the 268 gaskets is required FOB Origin, with performance based in New Cumberland.

All Other Plastics Product Manufacturing

POSTED

about 5 hours ago

DEADLINE

Supply of Vehicular Insulation Panels (NSN 2540-01-570-7862)This subcontract involves the supply of 24 specialized vehicular insulation panels for prime contractors supporting DLA Weapons Support Land Supplier Operations. The required components must meet NSN 2540-01-570-7862 and Pierce Manufacturing Inc part number 1392148. Performance of the contract takes place in New Cumberland, Pennsylvania, with delivery terms set as FOB Origin. The contractor is responsible for manufacturing or sourcing the panels in strict accordance with the Buy American Act and the Berry Amendment. Additionally, all shipments must adhere to MIL-STD-129/RP001 packaging standards. This procurement falls under NAICS code 321999 and is managed by the Department of Defense.

All Other Miscellaneous Wood Product Manufacturing

POSTED

about 5 hours ago

DEADLINE

Specialized Military Packaging ServicesThis subcontract for Specialized Military Packaging Services supports the Department of Defense under the DLA Weapons Support Land Supplier Opns Vehicle Spt agency. The contractor is responsible for providing military-grade packaging, sealing, and marking for prime contractors, with performance taking place in New Cumberland. Key technical requirements include sealing items in MIL-DTL-117 Type II Class C Style 1 opaque bags to protect against UV deterioration, adhering to MIL-STD-2073-1E for packaging, and following MIL-STD-129 for marking. The scope of work further includes palletization according to RP001 and the handling of hazardous materials per IP025, culminating in the delivery of fully packaged and palletized shipments. This opportunity falls under NAICS code 561910 and was posted on November 5, 2026, with a response deadline of November 16, 2026.

Packaging and Labeling Services

POSTED

about 5 hours ago

DEADLINE

Supply of Gaskets (NSN 5330-01-654-9835)This subcontract involves the procurement of 51 units of Gasket, NSN 5330-01-654-9835, Part Number BL-19002-1, to support DLA Weapons Support Land Supplier Opns Vehicle Spt projects. The selected provider is responsible for manufacturing or sourcing the components in strict accordance with RA001 technical requirements and FAR 52.246-1 quality standards. The agreement mandates full compliance with the Buy American Act and DFARS cybersecurity regulations. All units must be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The opportunity is categorized under NAICS code 339999 and is managed by the Department of Defense.

All Other Miscellaneous Manufacturing

POSTED

about 5 hours ago

DEADLINE

Specialized Industrial Gasket Supplier (NSN 5330-00-763-0592)This subcontract involves the manufacture or procurement of 61 specialized industrial gaskets for prime contractors supporting Department of Defense supply contracts. The gaskets must strictly adhere to NSN 5330-00-763-0592 and Falk Corp part number 706757. To ensure safety and regulatory compliance, all materials must be mercury-free and asbestos-free in accordance with FED-STD-313. The contractor is responsible for packaging the items in waterproof and greaseproof bags following MIL-DTL-117, Type II, Class C, Style 1 standards, with marking requirements meeting MIL-STD-2073-1E and MIL-STD-129. Once processed, the 61 packaged gaskets are to be delivered to the DLA Distribution center located in New Cumberland, Pennsylvania.

All Other Miscellaneous Manufacturing

POSTED

about 5 hours ago

DEADLINE

Gasket Supplier (NSN 5330-01-728-1867)This subcontract involves the manufacture or sourcing of two gaskets under NSN 5330-01-728-1867 for prime contractors supporting DLA Weapons Support Land Supplier Operations. The supplier must ensure all hardware is mercury-free and provide comprehensive supply chain traceability documentation. Strict adherence to military standards is required, specifically MIL-DTL-117 for waterproof, greaseproof, and opaque packaging, as well as MIL-STD-129 and MIL-STD-2073-1E for marking. The completed items are to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. This opportunity falls under NAICS code 339999 and is managed by the Department of Defense. Interested parties must respond by November 16, 2026.

All Other Miscellaneous Manufacturing

POSTED

about 5 hours ago

DEADLINE

Supply of Packing Assembly (NSN: 5330009693117)This subcontract involves the manufacture or sourcing of five Packing Assembly units under NSN 5330009693117 for prime contractors supporting DLA supply contracts. The selected provider must ensure all hardware meets exact specifications and adheres to the 29 CFR Hazard Communication Standard for the packaging and labeling of hazardous materials. The contract is issued by the Department of Defense through the DLA Weapons Support Land Supplier Operations Vehicle Support agency. Final delivery of the assemblies is required at the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 5 hours ago

DEADLINE

MIL-SPEC Packaging and Labeling Services

Packaging and Labeling Services

POSTED

about 5 hours ago

DEADLINE

Manufacturer of Specialized Knobs (NSN 5355-00-038-9200)

POSTED

about 5 hours ago

DEADLINE

Aerospace Component Finishing and CoatingThis subcontract, titled Aerospace Component Finishing and Coating, involves providing specialized surface treatments and coatings for prime contractors supporting DLA aerospace supply contracts. The scope of work focuses on applying specific aerospace platings and anodizing to shaft and tube components to ensure corrosion prevention. All operations must be conducted without the use of Class I ozone-depleting chemicals to comply with strict contract restrictions, and all finished components must meet DLA quality standards. The project is managed under the Department of Defense through the DLA Weapons Support Land Supplier Opns Vehicle Spt agency. Performance of the work will take place in New Cumberland, Pennsylvania. The solicitation was posted on November 5, 2026, with a response deadline of November 16, 2026, and is categorized under NAICS code 332813.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 5 hours ago

DEADLINE

Supply of Aerospace-Grade Raw MaterialsThis subcontract through the Department of Defense, specifically the DLA Weapons Support Land Supplier Opns Vehicle Spt, involves the supply of certified aerospace-grade raw metals and alloys. The scope of work requires the provision of bars, tubes, or forgings that strictly adhere to P/N MBCS4458 specifications to support prime contractors on DLA aerospace supply contracts. To ensure full compliance with Buy American requirements, the supplier must provide comprehensive Material Test Reports and Certificates of Conformance with all deliveries. The performance of this contract is centered in New Cumberland, Pennsylvania, under NAICS code 336413, with a response deadline set for November 16, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

Manufacturing of Shaft and Tube Support AssemblyThis subcontract involves the precision machining and assembly of Shaft and Tube Support Assemblies for the Department of Defense, specifically under the DLA Weapons Support Land Supplier Operations Vehicle Support agency. The scope of work requires the execution of CNC turning, milling, and grinding of components according to P/N MBCS4458 technical data packages, with all final deliveries required to meet RA001 quality standards. Performance will take place in New Cumberland, Pennsylvania. Due to the nature of the defense work, the contractor must be capable of handling Covered Defense Information and must complete a CMMC Level 2 self-assessment. The opportunity was posted on November 5, 2026, with a response deadline of November 16, 2026, falling under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

First Article Test (FAT) Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Quality Assurance and Testing for Source-Controlled Fasteners

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Third-Party Quality Assurance and Inspection for Aircraft Floor Component

Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

Third-Party Inspection and Certification

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Aerospace Quality Inspection and Testing Services

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 5 hours ago

DEADLINE

First Article Testing and Validation Services

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 5 hours ago

DEADLINE

Critical Application Quality Inspection

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 5 hours ago

DEADLINE

First Article Testing and Quality Conformance

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 5 hours ago

DEADLINE

Aerospace Quality Assurance and Dimensional Inspection

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

First Article Test (FAT) Support & Certification

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 5 hours ago

DEADLINE

Inspection and Testing of F108 Fan Disks/Hubs

Ok DLA Aviation At Oklahoma City

POSTED

about 10 hours ago

DEADLINE

Quality Assurance and Material Testing

Pa DLA Aviation At Philadelphia

POSTED

about 10 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS