Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Third-Party Quality Assurance and Inspection for Aircraft Floor Component

Open

Federal

Response Deadline11/13/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves providing third-party quality assurance and inspection services for aircraft floor components supporting Defense Logistics Agency Weapons Support projects. The selected contractor will perform independent validation for prime contractors, focusing on dimensional inspections and material verification according to Basic Drawing 81205 5-87467. Key responsibilities include ensuring compliance with the Buy American Act and delivering detailed inspection reports and Certificates of Conformance. Technical execution requires the use of CMM or high-precision aerospace metrology tools. To qualify, the contractor must hold ISO 9001 or AS9100 certification and maintain compliance with SAE AS9003 standards. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense.

General Info

Third-party quality assurance and inspection services for DLA aircraft floor component projects.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

541380 - Testing Laboratories and Services

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE4A7-27-T-3012.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

FLOOR, AIRCRAFT

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 5

subcontract

Response DeadlineNov 13

Submission deadline

Response Deadline

11/13/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs independent inspection and validation for prime contractors on DLA Weapons Support projects. Conducts dimensional inspection and material verification against Basic Drawing 81205 5-87467 and validates Buy American Act compliance. Utilizes CMM or high-precision aerospace metrology tools. Requires ISO 9001 or AS9100 certification and SAE AS9003 compliance. Delivers inspection reports and Certificates of Conformance.

Similar Contracts

Same NAICS industry code

RFQ#9783 Respirable Crystalline Silica Exposure Assessment

Solicitation # RFQ#9783

Management & Training Corporation (MTC) is soliciting bids under RFQ#9783 for a subcontracting opportunity to conduct a Respirable Crystalline Silica Exposure Assessment at the Edison Job Corps Center in Edison, New Jersey. The project requires a qualified industrial hygiene consultant to evaluate the Brick Trade training program, specifically focusing on 27 potentially exposed students and instructors involved in activities such as fire clay mixing and brick cutting. The scope of work includes performing site assessments, implementing a personal breathing-zone air sampling plan, and comparing results against OSHA permissible exposure limits and action levels. Deliverables consist of a written report, laboratory results, exposure calculations, and a prioritized corrective action plan for reducing exposures. This is a fee-for-service contract awarded on a best-value basis. Interested offerors must submit a lump sum bid, a completed supplier packet including Form W-9 and self-certification, proof of insurance, and three professional references by November 6, 2026. The solicitation is open to various small business set-asides, including VOSB, SDVOSB, WOSB, and HUBZone. Awardees must comply with Service Contract Labor Standards for Middlesex County, New Jersey, and adhere to strict federal guidelines regarding the protection of sensitive information and the Buy American Act. First-tier subcontractors with contracts exceeding 45,000 dollars must also provide disclosures regarding government debarment or suspension.

Edison Job Corps

POSTED

about 4 hours ago

DEADLINE

in about 23 hours

Dimensional Inspection and Certification Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Valve Component Testing and Quality CertificationThis subcontract for Valve Component Testing and Quality Certification involves performing final inspections and quality certifications for prime contractors delivering DLA supply contracts. The scope of work requires conducting dimensional verification against Drawing NR 53711 6397408 Revision C utilizing CMM and calibrated gauges. The selected provider must execute zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331 to certify compliance with DLA Master List requirements and deliver all necessary inspection reports and quality certification documents. The project is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance taking place in New Cumberland, Pennsylvania. The opportunity is categorized under NAICS code 541380. Interested parties must respond by the deadline of November 16, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 4 hours ago

DEADLINE

First Article Testing and ValidationThis subcontract involves performing Factory Acceptance Testing for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The primary objective is to conduct testing on the first production unit of NSN 4720016501242 to verify that the item meets specific dimensional, performance, and white color requirements. The selected provider will utilize quality control equipment to document and report all findings for government approval. Final deliverables for this effort include a comprehensive FAT Report and a validated first-article sample. The work is associated with NAICS code 541380 and is to be performed in New Cumberland.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

First Article Testing and Validation ServicesThis subcontract for First Article Testing and Validation Services supports the Department of Defense DLA Weapons Support ASC Supplier Oper OEM Division. The selected contractor will perform first article testing on a prototype unit to ensure validation against Design 25-74076-3. This process involves utilizing load testing, tensile strength testers, or non-destructive inspection tools, with the final deliverable being a comprehensive test report due within 30 calendar days of the contract date. Performance will take place in Tracy, California, under NAICS code 541380. To qualify, contractors must adhere to SAE AS9003 or ISO 9001 quality standards and maintain ITAR/EAR authorization for the secure handling of technical data. The response deadline for this opportunity is November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

Non-Destructive Testing (NDT) and Quality InspectionThis subcontract for Non-Destructive Testing (NDT) and Quality Inspection supports prime contractors on DLA Weapons Support Land Supply Chain projects. The scope of work involves performing specialized inspections and testing in accordance with QAP 16236 and SQAP009382983, specifically focusing on casting integrity checks and dimensional verification against TDP Rev B Gen 3. The selected provider is responsible for delivering certified inspection reports and comprehensive quality assurance documentation. Performance will take place at Hill AFB, and the contractor must hold ISO 17025 or an equivalent laboratory certification. Additionally, JCP Certification is required to ensure authorized access to necessary technical data. This opportunity falls under NAICS code 541380, with a response deadline set for November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

Aerospace Quality Assurance & CertificationThe Aerospace Quality Assurance and Certification subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves performing final inspections and airworthiness testing for prime contractors. The selected provider must verify supply chain traceability according to DLAD Procurement Note C03, validate bare item marking per RQ046, and execute certification of compliance with CDRL-FAACERTCOM-25015. The primary deliverable for this engagement is the provision of official FAA Airworthiness Approval documentation. To qualify for this role, the contractor must provide an FAA-certified inspector or a Designated Engineering Representative. The work is designated under NAICS code 541380 and will be performed in New Cumberland. Interested parties must respond by November 13, 2026, to meet the requirements of this specialized quality assurance project.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Electrical Cable Testing and Certification Laboratory

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

Aerospace NDT Inspection and Certification

Defense Logistics Agency

POSTED

about 4 hours ago

DEADLINE

Aerospace Non-Destructive Testing (NDT) & FAT SupportThis subcontract involves providing Aerospace Non-Destructive Testing and First Article Testing support for prime contractors working on DLA Weapons Support ASC aircraft projects. The selected provider will perform NDT and dimensional verification on two initial units to ensure strict compliance with reference drawings, ultimately delivering validated units and certified inspection reports to Robins Air Force Base. To qualify for this engagement, the contractor must hold NDT accreditation and maintain ISO 9001:2015 certification. The project falls under NAICS code 541380 and is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

First Article Testing for Vehicular ShelvesThis subcontract involves performing First Article Testing for vehicular shelves to support the Department of Defense, specifically the DLA Weapons Support Land Supplier Operations. The contractor is responsible for executing test protocols in accordance with Quality Assurance Provision 19200 13048707 and utilizing precision measurement equipment to validate Drawing NR 19200 13048707. The scope of work requires the verification of critical, major, and minor attributes against the Technical Data Package. The project deliverables include a certified First Article Testing report and an approved first article unit. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 541380. The solicitation was posted on November 5, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 4 hours ago

DEADLINE

Third-Party Quality Inspection for Critical FastenersThis subcontract for Third-Party Quality Inspection for Critical Fasteners supports the Department of Defense through the DLA Weapons Support ASC Commodities Division. The selected provider will perform independent quality sampling and inspection for prime contractors, ensuring zero non-conformances against the DLA Master List of Technical and Quality Requirements. Work is performed in Cherry Point and requires the use of calibrated precision measurement tools, such as micrometers and optical comparators, to execute sampling plans according to MIL-STD-1916 or ASQ H1331 standards. Qualified personnel must be Certified Quality Inspectors to deliver the necessary inspection reports and certifications of conformance. The opportunity is categorized under NAICS code 541380, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supply of Adhesive Hardener (NSN 8040-01-440-5474)This subcontract involves the supply of specialized adhesive hardener, specifically NSN 8040-01-440-5474, to support prime contractors on Defense Logistics Agency Troop Support contracts. The requirement is for one 1.75 ounce bottle to be delivered FOB Destination to Vandenberg SFB, California. The contractor must adhere to strict quality and safety standards, including MIL-STD-2073-1E and MIL-STD-129, while ensuring all HAZMAT shipping requirements under IP025 are met. Additionally, the product requires precise temperature-controlled storage and transit, maintaining a range between 46 and 70 degrees Fahrenheit.

Other Chemical and Allied Products Merchant Wholesalers

POSTED

about 4 hours ago

DEADLINE

Supply of Clamping Catches (NSN 5340-00-286-7532)This subcontract with the Defense Logistics Agency involves the procurement or manufacture of 71 clamping catches, identified by NSN 5340-00-286-7532 and Part Number 15642C, for use on DLA Weapons Support projects. The contractor is responsible for ensuring all units are packaged and palletized according to RP001 standards and labeled in compliance with MIL-STD-129. The agreement mandates strict adherence to federal regulations, specifically the Buy American requirements under DFARS 252.225-7001 and the restrictions regarding hexavalent chromium as outlined in DFARS 252.223-7008. The project falls under NAICS code 335139 and requires the delivery of fully packaged and labeled hardware to support prime contractors.

Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

MIL-SPEC Packaging and Preservation for O-RingsThis subcontract involves providing specialized military-grade packaging and preservation services for O-rings on behalf of prime contractors supporting the Defense Logistics Agency. The scope of work requires sealing items in medium duty, waterproof, greaseproof, and opaque bags in strict accordance with MIL-DTL-117, Type II, Class C, Style 1. Additionally, the contractor must execute all packaging and marking procedures following MIL-STD-2073-1E and MIL-STD-129 standards to ensure the final products are fully prepared for shipment. The opportunity is categorized under NAICS code 488510 and is associated with the Department of Defense. Interested parties must adhere to the timeline established by the posting date of November 5, 2026, with a response deadline set for November 11, 2026. The primary objective is the delivery of fully compliant, marked, and packaged components that meet rigorous military specifications for durability and identification.

Freight Transportation Arrangement

POSTED

about 4 hours ago

DEADLINE

Supply of NSN 5331-01-066-9242 O-RingsThis subcontract involves the procurement of eight specialized O-rings under NSN 5331-01-066-9242 to support prime contractors for the Defense Logistics Agency within the Department of Defense. The selected provider is responsible for manufacturing or sourcing the components in strict accordance with DFARS Part 225 Buy American and Balance of Payments Program requirements. A critical component of the agreement is the provision of comprehensive supply chain traceability documentation for all delivered units. The opportunity is categorized under NAICS code 332999, with a response deadline set for November 11, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

Specialized Sealing Compound SupplierThis subcontract involves the supply of a brown sealing compound, identified by NSN 8030016271475, to support prime contractors delivering for the Defense Logistics Agency. The requirement specifies a 6 oz semi-kit featuring a separate catalyst that must adhere to Boeing, PRC-Desoto, or PPG specifications. The final product is to be delivered as one labeled unit to Altus Air Force Base. Strict compliance is required regarding safety and logistics, including hazardous materials labeling per 29 CFR 1910.1200 and packaging standards according to MIL-STD-2073-1E and MIL-STD-129. Additionally, the supplier must provide full supply chain traceability and a hazardous materials certification to ensure all regulatory and military standards are met.

Laminated Aluminum Foil Manufacturing for Flexible Packaging Uses

POSTED

about 4 hours ago

DEADLINE

Supply of Spacer Sleeves (NSN 5365016617002)This subcontract involves the manufacture or procurement of 43 spacer sleeves, identified by NSN 5365016617002, to support prime contractors fulfilling Defense Logistics Agency supply contracts. The selected provider is responsible for delivering the total quantity of units to a designated DLA location. Strict quality control measures are required for this engagement, with inspections performed according to MIL-STD-1916 and sampling conducted per MIL-STD-105/ASQ Z1.4. The contract mandates a zero-tolerance policy for non-conformances within the sample lot to ensure full compliance with Department of Defense standards.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 4 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on Defense Logistics Agency Weapons Support projects. The scope of work involves the specialized packaging and marking of pistons to ensure they are ready for final delivery to Hill Air Force Base in Utah. All work must adhere to strict military and industry standards, specifically utilizing ASTM D3951 and RP001 for packaging and MIL-STD-129 for markings. The contractor is required to use MIL-SPEC crates, moisture barriers, and cushioning to protect the components. Additionally, the application of Hazard Warning Labels must comply with DFARS 252.223-7001. This opportunity falls under NAICS code 488510 and is managed through the Department of Defense.

Freight Transportation Arrangement

POSTED

about 4 hours ago

DEADLINE

Precision Machined Linear Actuating Piston SupplierThis subcontract opportunity with the Defense Logistics Agency involves the manufacture of linear actuating cylinder pistons for prime contractors on Weapons Support projects. The selected supplier will perform precision machining using CNC centers and lathes to meet the specifications of NSN 1650-01-505-4087 and Pneudraulics, Inc. PN 71358. To be eligible, contractors must maintain an ISO 9001:2015 quality system and provide a CMMC Level 2 self-assessment. Additionally, all materials used in production must strictly comply with the Berry Amendment and the Buy American Act. The response deadline for this requirement is November 13, 2026.

POSTED

about 4 hours ago

DEADLINE

Supplier of Ring Spacers (NSN 5365012769185)This subcontract involves the supply of four specialized ring spacers, identified by NSN 5365012769185, to prime contractors supporting the Defense Logistics Agency. The supplier is responsible for manufacturing or sourcing these components in strict accordance with the DLA Master List of Technical and Quality Requirements (RA001) and must ensure compliance with DFARS 252.223-7008 regarding the use of hexavalent chromium. All deliverables must adhere to MIL-STD-129 standards for marking and shipment. The opportunity is categorized under NAICS code 332510 and was posted on November 5, 2026, with a response deadline of November 13, 2026.

Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

Supply of Aerospace-Grade Raw Materials for Airfoil RibsThis subcontract involves the supply of aerospace-grade raw materials, specifically aluminum, titanium, or composite alloys, for prime contractors working on Defense Logistics Agency supply contracts. The materials are intended for the production of airfoil ribs and must strictly adhere to the specifications of NSN 1560-01-556-1414. The selected provider is responsible for sourcing and certifying the raw material stock, ensuring all deliveries are accompanied by Material Test Reports and Certificates of Conformance. All quality controls must meet AS9100 or equivalent aerospace industry standards. This opportunity falls under NAICS code 332410 and is managed through the Department of Defense.

Power Boiler and Heat Exchanger Manufacturing

POSTED

about 4 hours ago

DEADLINE

Manufacturing of Airfoil Ribs (NSN 1560-01-556-1414)This subcontract involves the manufacturing of 14 airfoil rib units for prime contractors under Defense Logistics Agency supply contracts. The scope of work requires the fabrication of aircraft structural ribs using aerospace forming equipment or precision CNC machining to meet the exact technical specifications of NSN 1560-01-556-1414. The contractor must ensure full compliance with the DLAD and the DLA Master Solicitation Technical and Quality Requirements. This project falls under NAICS code 336413 and is managed by the Department of Defense.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

Specialized Aerospace Component Packaging

Motor Vehicle Towing

POSTED

about 4 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Third-Party Inspection and Certification

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

First Article Testing and Validation Services

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 4 hours ago

DEADLINE

Critical Application Quality Inspection

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

First Article Testing and Quality Conformance

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 4 hours ago

DEADLINE

Aerospace Quality Assurance and Dimensional Inspection

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

Inspection and Testing of F108 Fan Disks/Hubs

Ok DLA Aviation At Oklahoma City

POSTED

about 9 hours ago

DEADLINE

Quality Assurance and Material Testing

Pa DLA Aviation At Philadelphia

POSTED

about 9 hours ago

DEADLINE

Flight Critical Quality Inspection and Reporting

Pa DLA Aviation At Philadelphia

POSTED

about 9 hours ago

DEADLINE

in about 23 hours

Ultrasonic Testing (UT) for Land Cranes (LC42 & LC43) rails at Dry Dock 6, Yokosuka Japan

Solicitation # N4008427P0809

Navfacsyscom Far East

POSTED

about 9 hours ago

DEADLINE

H999--Biological Sampling and Analysis Pharmacy Clean Room | start 1 Jan 2027

Solicitation # 36C26127Q0034

261-NETWORK Contract Office 21 (36C261)

POSTED

about 9 hours ago

DEADLINE

Production Lot Testing and Quality Validation

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Aerospace Quality Assurance and Sampling Inspection

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS