Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Aerospace Surface Treatment and Marking

Active

Federal

Response Deadline11/12/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for the Department of Defense, specifically the DLA Weapons Support ASC Supplier OEM Division, involves providing surface finishing, plating, and marking services for aerospace hardware. The selected contractor will be responsible for applying surface treatments according to technical data packages and executing bare item marking using industrial etching and aerospace-grade plating baths in compliance with MIL-STD-130 and BAC 5307. The work is to be performed at Tinker AFB. To be eligible, contractors must maintain ISO 9001:2015 or AS9100 certification and ensure full ITAR and EAR compliance. The project falls under NAICS code 332813 and requires the delivery of finished and marked components. The response deadline for this opportunity is November 12, 2026.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

NAICS

332813 - Electroplating, Plating, Polishing, Anodizing, and Coloring

Place of Performance

TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A5-27-T-2279.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SLEEVE ASSEMBLY, FLAP

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 4

subcontract

Response DeadlineNov 12

Submission deadline

Response Deadline

11/12/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs surface finishing, plating, and marking for prime contractors on DLA Weapons Support ASC aerospace hardware projects. Applies surface treatments per technical data package and executes bare item marking in accordance with MIL-STD-130 and BAC 5307 using industrial etching and aerospace-grade plating baths. Requires ISO 9001:2015 or AS9100 and ITAR/EAR compliance. Delivers finished and marked components.

Similar Contracts

Same NAICS industry code

Defense-Grade Surface Treatment and Coating

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 19 hours ago

DEADLINE

Aerospace Finishing & Coating Services

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 19 hours ago

DEADLINE

Phosphate Coating Services for Traverse Mechanism HousingThis subcontract, issued by the DLA Weapons Support Land Supply Chain under the Department of Defense, seeks a qualified provider to perform specialized phosphate coating for traverse mechanism housings. The project involves applying a Manganese coating to finished metal housings using industrial coating tanks and chemical processing equipment to support critical gun part projects. To be eligible, the contractor must be an approved RQ036 Phosphate Coating Supplier and ensure all deliverables are ready for final inspection. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332813. Interested parties must submit their responses by November 16, 2026. This contract focuses on precise chemical processing requirements to meet strict military specifications for prime contractors.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

NADCAP-Approved Special Process ServicesThis subcontract opportunity is for the provision of NADCAP-approved special process services to support prime contractors delivering DLA supply contracts. The scope of work involves executing specialized aerospace processes, specifically Non-Destructive Testing and chemical processing, in strict accordance with requirement RQ040 and Drawing 20145214. All processed components must be delivered with the necessary certifications of conformance to ensure quality and compliance. The contract is a total small business set-aside under NAICS code 332813, managed by the Department of Defense DLA Weapons Support ASC. Performance will take place at Tinker AFB. To be eligible, providers must maintain NADCAP approval for the specified processes and adhere to CMMC Level 2 standards for the secure handling of technical data. Responses are due by November 12, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 19 hours ago

DEADLINE

Aerospace Surface Treatment and CoatingThis subcontract for Aerospace Surface Treatment and Coating involves applying specialized surface coatings to radome shells for the DLA Weapons Support ASC. The contractor is responsible for surface preparation and finishing in accordance with Drawing 26512 C1001B9000, with a strict requirement to prohibit the use of hexavalent chromium per DFARS 252.223-7008. The project demands a controlled environment facility and full compliance with ITAR and EAR regulations. This opportunity is managed by the Department of Defense under NAICS code 332813, with a response deadline of December 3, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 19 hours ago

DEADLINE

Turbine Component Thermal Spray/Coating Services

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 19 hours ago

DEADLINE

Finishing and Coating for Lever Control HandleThis subcontract involves providing specialized protective coatings and surface treatments for a Lever Control Handle used in DLA Weapons Support combat vehicle projects. The selected contractor will perform military-grade plating, anodizing, powder coating, and chemical filming in strict accordance with BAE technical data packages. To be eligible, the contractor must maintain ISO 9001:2015 certification and ensure full compliance with the Buy American Act and the Berry Amendment. The scope of work culminates in the delivery of one finished and coated handle, with performance taking place in New Cumberland.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 19 hours ago

DEADLINE

NADCAP Approved Special Process ServicesThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier OE and AF Div, requires the performance of NADCAP-approved special processes for aircraft components. The scope of work includes chemical processing, heat treating, or coating as specifically detailed in Drawing 20145214. To be eligible, the contractor must maintain current NADCAP approval for the specific process being executed and provide certifications of conformity upon delivery of the processed components. The work is to be performed at Tinker AFB, zip code 73145-8000, under NAICS code 332813. The solicitation was posted on November 4, 2026, with a response deadline of November 12, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 19 hours ago

DEADLINE

Phosphate Coating Services

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 19 hours ago

DEADLINE

Industrial Coating and Finishing for Mounting BracketsThis subcontract for Industrial Coating and Finishing for Mounting Brackets supports the DLA Weapons Support Land Supply Chain. The selected contractor is responsible for applying protective coatings and finishes to brackets, specifically performing surface preparation and plating in accordance with the technical data package for NSN 5340-01-694-9027. All work must be performed in compliance with the 29 CFR 1910.1200 Hazard Communication Standard, and Safety Data Sheets must be provided per Federal Standard No. 313. The project falls under NAICS code 332813 and will be performed in Green Bay. Interested parties must respond by November 16, 2026. The primary objective is the delivery of finished and coated brackets that meet all specified Department of Defense technical and safety requirements.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

Aerospace Surface Treatment and Finishing for Mount AssembliesThis subcontract opportunity involves providing specialized surface treatments and coatings for mount assemblies supporting DLA Weapons Support ASC projects. The selected contractor will be responsible for applying aerospace-grade finishes in strict accordance with the provided technical data package and the DLA Master List of Technical and Quality Requirements. To ensure quality standards are met, the contractor must maintain ISO 9001:2015 certification. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division, with performance taking place in New Cumberland. Interested parties must submit their responses by November 12, 2026. The scope of work concludes with the delivery of finished, coated aerospace components under NAICS code 332813.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

Specialized Chemical Coating and FinishingThis subcontract for Specialized Chemical Coating and Finishing supports the DLA Weapons Support Land Supply Chain by providing chemical conversion coating and precise color-matching services. The scope of work involves applying chromate conversion coatings in accordance with AMS-QQ-A-225/6 and ensuring color matching meets AMS-STD-595 standards through the use of colorimetry tools and chemical baths. All finished parts must be delivered with certified documentation confirming coating and color compliance. Performance will take place at Hill AFB, and the contractor must adhere to strict regulatory requirements, including ITAR/EAR compliance and DFARS 252.204-7012 cybersecurity standards. The opportunity is categorized under NAICS code 332813, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

MIL-SPEC Packaging and Palletization ServicesThis subcontract for MIL-SPEC Packaging and Palletization Services supports prime contractors delivering to the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper OEM Division. The scope of work involves providing military-grade packaging and palletization services to ensure shipments are fully prepared for transport. All activities must strictly adhere to ASTM D3951 for unit packaging, MIL-STD-129 for marking and labeling, and RP001 DLA Packaging Requirements for palletization. The performance of this contract will take place in New Cumberland, Pennsylvania. Interested parties should note that the solicitation was posted on November 4, 2026, with a response deadline of November 12, 2026. The services fall under NAICS code 488410, focusing on the delivery of fully packed and labeled shipments that meet rigorous military specifications.

Motor Vehicle Towing

POSTED

about 19 hours ago

DEADLINE

Manufacturing of Interface Panel, OperatorThis subcontract involves the manufacture and supply of one Operator Interface Panel for prime contractors supporting DLA Weapons Support ASC contracts. The scope of work includes the fabrication of the assembly and the integration of electronic components according to proprietary technical data for NSN 4920-01-632-9466. All units must undergo quality assurance testing in accordance with RA001 standards, and the use of additive manufacturing is strictly prohibited. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, with performance taking place in New Cumberland. The contract is categorized under NAICS code 334419, and the final deliverable is one completed and tested Interface Panel.

Other Electronic Component Manufacturing

POSTED

about 19 hours ago

DEADLINE

MIL-SPEC Packaging and IUID Marking ServicesThis subcontract for MIL-SPEC Packaging and IUID Marking Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves applying Item Unique Identification using laser etchers in accordance with MIL-STD-130 and performing packaging for shipments following MIL-STD-129 and FED-STD-313/TQ IP025 standards for hazardous materials. The final deliverable consists of fully marked and packaged kits ready for transport to the DLA Distribution Depot Oklahoma. The project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper OEM Division, with performance taking place at Tinker AFB. Classified under NAICS code 561990, the opportunity was posted on November 4, 2026, with a response deadline of November 12, 2026.

All Other Support Services

POSTED

about 19 hours ago

DEADLINE

Aerospace Grade Raw Material Supply (Aircraft Skin Stock)This subcontract involves the supply of raw aerospace-grade aluminum or titanium alloys for prime contractors supporting DLA Weapons Support ASC projects. The provider is responsible for sourcing and certifying materials that strictly adhere to Boeing P/N 527-13401-2 metallurgical specifications, delivering the certified raw material stock directly to the fabricator. To ensure quality and regulatory adherence, the supplier must provide Mill Test Reports for full traceability and maintain compliance with the Buy American Act and DFARS cybersecurity standards. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, the performance of this contract is centered at Tinker AFB. The opportunity is categorized under NAICS code 331221, with a response deadline set for November 12, 2026.

Rolled Steel Shape Manufacturing

POSTED

about 19 hours ago

DEADLINE

Aircraft Skin Fabrication (P/N 527-13401-2)This subcontract involves the manufacture of 91 aircraft skin kits for prime contractors supporting DLA Weapons Support ASC projects. The contractor is responsible for fabricating panels according to Boeing part number 527-13401-2 engineering specifications, utilizing precision machining and forming equipment. Completed kits are to be delivered FOB Origin to the DLA Distribution Depot Oklahoma, with the place of performance located at Tinker AFB. To qualify, the provider must maintain SAE AS9003 or ISO 9001 quality systems and complete a CMMC Level 2 self-assessment. Additionally, the contract requires strict adherence to the Buy American Act. This opportunity is managed by the Department of Defense under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

Supply of Aircraft Wrench Adapters (NSN 4920015093322)This subcontract involves the manufacture or sourcing of four aircraft wrench adapters, identified by NSN 4920015093322, for prime contractors supporting the DLA Weapons Support ASC. The production process requires precision machining and tooling, with strict adherence to quality inspection standards such as SAE AS9003 or ISO 9001. Additionally, the contractor must ensure all items are packaged according to ASTM D3951 and RP001 and labeled in compliance with MIL-STD-129. To be eligible, the provider must maintain CMMC Level 2 and JCP certifications to ensure full ITAR and EAR compliance. The project falls under NAICS code 336413 and is managed by the Department of Defense. Performance will take place in New Cumberland, Pennsylvania, with a response deadline set for November 12, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

Manufacturing of Retainer Assembly (NSN 1680-01-609-9298)

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

Supply of Critical Application O-Rings (Parker-Hannifin)

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 19 hours ago

DEADLINE

Supply of Angle Brackets (NSN 5340-01-693-5127)

Hardware Manufacturing

POSTED

about 19 hours ago

DEADLINE

Supply of Spiral Torsion Springs (NSN 5360010981159)This subcontract involves the manufacture or sourcing of 111 spiral torsion springs, identified by NSN 5360010981159, for prime contractors working on DLA Weapons Support ASC projects. All units must be produced to meet strict technical specifications and DLA OEM standards, with delivery coordinated through the First Destination Transportation program. The contract is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, with the place of performance located in Greensboro. The solicitation was posted on November 4, 2026, with a response deadline of November 12, 2026, falling under NAICS code 332613.

Spring Manufacturing

POSTED

about 19 hours ago

DEADLINE

Supply of Dial Indicating Pressure Gages (NSN 6685011036583)This subcontract involves the manufacture or sourcing of 61 dial indicating pressure gages for the Department of Defense, specifically under the DLA Weapons Support ASC Supplier Oper OEM Division. All units must strictly adhere to Reference Drawing NR 10001 3269882, Revision F, and meet rigorous quality control standards for critical application items. The contractor is responsible for packaging these non-hazardous materials in accordance with ASTM D3951 and ensuring registration within the DLA AMPS/VSM system. The project is categorized under NAICS code 334519 and will be performed in Tracy, California. Interested parties must respond by November 12, 2026, to provide the required 61 packaged units as specified in the solicitation.

Other Measuring and Controlling Device Manufacturing

POSTED

about 19 hours ago

DEADLINE

Supply of Preformed Packing O-RingsThis subcontract involves the supply of 301 units of preformed packing O-rings matching NSN 5331009225854 for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper OEM Division. The contractor is responsible for manufacturing or sourcing the components and ensuring all materials are packaged according to MIL-STD-2073-1E and palletized in compliance with RP001 DLA Packaging Requirements. The agreement specifies that materials will be shipped FOB Origin, with the place of performance located in New Cumberland. Operating under NAICS code 325211, the contract was posted on November 4, 2026, with a response deadline of November 12, 2026.

Plastics Material and Resin Manufacturing

POSTED

about 19 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Gear Hardening and Surface Treatment

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Aerospace Finishing and Painting Services

FA8118 Afsc Pzabb

POSTED

DEADLINE

Specialized Plating and Coating Services

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Marine-Grade Industrial Finishing

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Aerospace Component Finishing and Coating

Navsup Weapon Systems Support

POSTED

DEADLINE

Aerospace Component Surface Treatment and Finishing

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Cleaning and Impregnation of CLET Heat Exchangers

Solicitation # W911N227DA007

W6QK Lad Contr Office

POSTED

DEADLINE

Aerospace Surface Treatment and Finishing

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS