This Combined Synopsis/Solicitation opportunity from Department Of Agriculture was posted on July 22, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Agilent 6475 LC QQQ Maintenance and Repair

Closed

1232SA26Q1068Federal

Submission Closed07/31/2026, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811210

New

SLED

Town Clock Rehabilitation

Solicitation # BD-26-1657-BOS03-BOS03-133342

The Town of Berlin is seeking written quotations from qualified contractors for the rehabilitation of the First Parish Town Clock located at 24 Central Street in Berlin, Massachusetts. The selected contractor will be responsible for providing all necessary labor, materials, equipment, supervision, transportation, rigging, and incidentals required to complete the project. Interested parties must submit sealed general bids to the Town Administrator at 23 Linden Street, Room 206, Berlin, MA 01503. The deadline for submission is September 30, 2026, by 2:00 p.m. local time. This solicitation is identified by bid number 2026-003 and is managed by the primary point of contact, Michael Tusino.

BOS03 - Town of Berlin

POSTED

DEADLINE

Statewide Standby Generator, ATS & UPS Preventive Maintenance Services

Solicitation # BD-27-1107-FREG5-ACCOU-133129

The Massachusetts Trial Court, through the Office of Court Management, Facilities Management & Capital Planning, is soliciting bids for statewide preventive maintenance, inspection, operational testing, load-bank testing, repair, and emergency services for standby generators, automatic transfer switches, and uninterruptible power supply systems. The contract is structured into five independent regional award groups, with each region being awarded to the lowest responsible and eligible bidder. The initial performance period is 32 months, running from November 1, 2026, to June 30, 2029, with two optional one-year renewals available through June 30, 2031. Bidders must submit their response packages electronically via the COMMBUYS portal by September 30, 2026, including a bid deposit of at least 5 percent of the greatest possible bid amount per region. Award evaluation is based on bid responsiveness, eligibility, and the lowest evaluated regional price, with a requirement that contractors demonstrate the capacity to perform in multiple regions simultaneously if awarded more than one. Contractors must adhere to NFPA 70B, the Massachusetts Comprehensive Fire Safety Code, and the Massachusetts Electrical Code, and are required to provide detailed electronic service reports as a condition of payment. Payments are processed via Electronic Funds Transfer through the Comptroller's system, typically 45 days from invoice receipt.

FREG5 - Facilities Management & Capital Planning - Region V

POSTED

DEADLINE

MY700 and MY300 Technical Repair and Maintenance

POSTED

DEADLINE

28V DC and 400 Hz Helo Power Supply Load Testing

Sflc Procurement Branch 1(00080)

POSTED

DEADLINE

Life Saving, Firefighting & Safety Equipment

Navsup Flt Logistics Ctr Yokosuka

POSTED

DEADLINE

Propulsion & Auxiliary Machinery Maintenance

Navsup Flt Logistics Ctr Yokosuka

POSTED

DEADLINE

Omnicell Automated Dispensing System Maintenance

Department Of Veterans Affairs

POSTED

DEADLINE

Automated Logic Control (ALC) BMS Maintenance

242-NETWORK Contract Office 02 (36C242)

POSTED

DEADLINE

Calibration of Equipment for 249th EN BAT

Solicitation # W912HQ26QA031

The Department of Defense, through the W4LD USA Hecsa office, is soliciting bids for the calibration of equipment for the 249th EN BAT under solicitation number W912HQ26QA031. This requirement falls under NAICS code 811210 and is managed by the office located in Alexandria, Virginia. Interested parties must submit their responses by the deadline of September 14, 2026. Primary contact for this opportunity is Giorgiana Chen, with Jordan Baker serving as the secondary point of contact. Additional details and amendments are available through the provided solicitation documents.

POSTED

DEADLINE

Notice of Intent to Award to a Single Source - Maintenance Service for Molecular Devices SpectraMax Paradigm Multi-Mode Microplate Readers - PCA-NIAID-09685

Solicitation # PCA-NIAID-09685

The National Institutes of Health National Institute of Allergy and Infectious Diseases intends to award a one-year firm-fixed-price contract to Molecular Devices for the maintenance of SpectraMax Paradigm Multi-Mode Microplate Readers. The services will be performed at the NIH Vaccine Immunology Program Lab in Gaithersburg, Maryland, and include a compliance assurance service plan, onsite performance assurance, onsite essential protection, and the replacement of consumable parts. This is a sole-source procurement based on the determination that using the proprietary factory service is necessary to maintain data integrity and control for ongoing research studies. While this is not a request for competitive quotations, interested parties may submit capability statements to James French by September 16, 2026, for consideration before a final award decision is made.

National Institutes Of Health

POSTED

DEADLINE

16--BUS POWER CONTROL U, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QNB26

This presolicitation under number N0038326QNB26 is for the repair and modification of 11 units of Bus Power Control U, identified by NSN 7R-1680-015854816-P8. The delivery terms are FOB Origin. Due to the flight critical nature of the part and the fact that essential technical data and manufacturing knowledge are held by approved sources, this requirement necessitates engineering source approval by the design control activity to ensure part quality. The government intends to solicit this requirement from a single source under FAR 6.302-1, though other responsible sources may submit capability statements or proposals within the specified timeframe. Any entity not previously approved as a source must submit the required documentation via the NAVSUP Weapon Systems Support Source Approval Information Brochures to be considered for award. Failure to provide the necessary qualification data will result in the proposal not being considered.

Navsup Weapon Systems Support

POSTED

DEADLINE

66--COMPUTER,FLIGHT CON, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QSC24

This presolicitation notice, issued by the Navsup Weapon Systems Support under the Department of Defense, concerns the repair and modification of flight control computers. The requirement is for seven units under NSN 7R-6615-016276036-P8, utilizing TDP version 001, with delivery terms set as FOB Origin. The solicitation, numbered N0038326QSC24, was posted on September 11, 2026, with a response deadline of October 27, 2026. The contracting office is located in Philadelphia, Pennsylvania, and the primary point of contact for this requirement is Sarah L. Austin.

Navsup Weapon Systems Support

POSTED

1 day ago

DEADLINE

in about 1 month

AI Contract Overview

The contract seeks maintenance and repair services for an Agilent 6475 LC QQQ instrument with serial number SG2307S003 for a one-year period, issued under solicitation number 1232SA26Q1068 as a Request for Quotation with no additional written solicitation to follow. This procurement is structured as a combined synopsis and solicitation under FAR Part 12, intended for commercial items, and is exclusively reserved for small business concerns as a Total Small Business Set-Aside under the NAICS code 811210 for Electronic and Precision Equipment Repair and Maintenance, with a size standard of $34 million in annual revenue. All responsible small business sources are invited to submit quotations, which will be evaluated without restriction to specific vendors. The offering agency is the USDA ARS AFM APD, located in Beltsville, Maryland, with the work to be performed in Orono, Maine, 04469. The solicitation was posted on July 22, 2026, and responses are due by 10:00 PM Eastern Time on July 31, 2026. Primary point of contact for inquiries is Kerrie Hodges, reachable at kerrie.hodges@usda.gov. Quotations must be submitted through the SAM.gov platform, and the opportunity is exclusively available to small businesses that meet the size eligibility criteria, with no preference given to non-small entities under this set-aside.

General Info

Small business set-aside for one-year Agilent 6475 LC QQQ maintenance in Orono, Maine, due July 31, 2026.

Agency

Department Of Agriculture → USDA Ars Afm ApdView Agency

NAICS

811210 - Electronic and Precision Equipment Repair and MaintenanceView NAICS

Place of Performance

Orono, ME, 04469, USA

Set-Aside

SBA

Documents

(1)

Solicitation 1232SA26Q1068 for Maintenance and Repair of Agilent 6475 LC QQQ

PDF•rfp

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJul 22

Combined Synopsis

Response DeadlineJul 31

Deadline has passed

Submission Closed

07/31/2026, 10:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Agriculture → USDA Ars Afm Apd

Contacts1 person available

OfficeBELTSVILLE, MD, 20705, USA

Organization / Agency

Department Of Agriculture → USDA Ars Afm Apd

View Agency Profile

Office AddressBELTSVILLE, MD, 20705, USA

Contacts

Kerrie Hodges

contact@example.gov

Full Description

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Part 12. This announcement constitutes the only solicitation. Quotations are being requested and a separate written solicitation will not be issued.

Solicitation number 1232SA26Q1068 is issued as a Request for Quotation (RFQ) for Maintenance and Repair for Agilent 6475 LC QQQ instrument Serial Number SG2307S003 for one year.

This acquisition is set-aside for small business concerns. The applicable North American Industry Classification Standard Code is 811210 – Electronic and Precision Equipment Repair and Maintenance The small business size standard is $34 Million. This acquisition is a Total Small Business Set-Aside. All responsible sources may submit a quotation which will be considered by the agency.